Chiral nematic nanocomposites with pitch gradient elaborated by filtration and ultraviolet curing of cellulose nanocrystal suspensions

An innovative method combining frontal filtration with ultraviolet (UV) curing has been implemented to design cellulosic nanocomposite films with controlled anisotropic textures from nanometric to micrometric length scales. Namely, an aqueous suspension containing poly (ethylene glycol) diacrylate polymer (PEGDA) as a photocurable polymer and cellulose nanocrystals (CNCs) at a 70/30 mass ratio was processed by frontal filtration, followed by in-situ UV-curing in a dedicated cell. This procedure allowed designing nanocomposite films with highly oriented and densely-packed CNCs, homogeneously distributed in a PEGDA matrix over a thickness of ca. 500 μm. The nanocomposite films were investigated with small-angle X-ray scattering (SAXS), by raster-scanning along their height with a 25 μm vertically-collimated X-ray beam. The CNCs exhibited a high degree of orientation, with their director aligned parallel to the membrane surface, combined with an increase in the degree of alignment as concentration increased towards the membrane surface. Scanning electron microscopy images of fractured films showed the presence of regularly spaced bands lying perpendicular to the applied transmembrane pressure, highlighting the presence of a chiral nematic (cholesteric) organization of the CNCs with a pitch gradient that increased from the membrane surface to the bulk.

Colloidal phase behavior of high aspect ratio clay nanotubes in symmetric and asymmetric electrolytes

HYPOTHESIS

Imogolite nanotubes (INTs) are unique anisometric particles with monodisperse nanometric diameters. Aluminogermanate double-walled INTs (Ge-DWINTs) are obtained with variable aspect ratios by controlling the synthesis conditions. It thus appears as an interesting model system to investigate how aspect ratio and ionic valence influence the colloidal behavior of highly anisometric rods.

EXPERIMENTS

The nanotubes were synthesized by hydrothermal treatment for 5 or 20 days to modify the aspect ratio while the electrostatic interactions were investigated by comparing the colloidal stability in symmetric and asymmetric electrolytes. The phase behavior and their related microstructure were determined by optical observations and small-angle X-ray scattering measurements, coupled with interparticle distance modelling.

FINDINGS

We revealed that colloidal suspensions of Ge-DWINTs prepared in NaCl are guided by repulsive double layer forces, undergoing different liquid crystal phase transitions before stiffen into a glass-like state. We found that the microstructure can be rationalized by taking into account the anisometric nature of the particles. By contrast, dispersions prepared with asymmetric electrolytes are governed by strong attractive forces and thus form space-filling gels containing large nanotubes aggregates.

Relation between solid phase speciation and oral/lung bioaccessibility of metal(loid)s polluted soils in inhabited area: Contribution of synchrotron-based experiment

The presence of contaminated sites/soils in or near cities can pose significant risks to public health. The city of Viviez (France) was taken in reference site bears significant industrial responsibility, particularly in zinc metallurgy, with the presence of a now rehabilitated smelter. This has led to soil contamination by zinc (Zn), lead (Pb), arsenic (As), and cadmium (Cd), with concentrations reaching up to 4856 mg kg-1, 1739 mg kg-1, 195 mg kg-1, and 110 mg kg-1, respectively. The aim of this study is to comprehend the contamination patterns of the site post-rehabilitation, the geochemical behavior of each element, and their speciation (analyzed through BCR, XRD, and XANES) in relation to associated health risks due to metals accessibility for oral ingestion and inhalation by the local population. The findings revealed that elements inducing health risks were not necessarily those with the highest metal contents. All results are discussed in terms of the relationship between element speciation, stability of bearing phases, and their behavior in different media. XANES is an important tool to determine and estimate the Pb-bearing phases in garden soils, as well as the As speciation, which consist of Pb-goethite, anglesite, and Pb-humate, with variations in proportions (the main phases being 66 %, 12 % and 22 % for Pb-goethite, anglesite, and Pb-humate, respectively) whereas As-bearing phase are As(V)-rich ferrihydrite-like. A new aspect lies in the detailed characterization of solid phases before and after bioaccessibility tests, to qualify and quantify the bearing phases involved in the mobility of metallic elements to understand the bioaccessibility behavior. Ultimately, the health risk associated with exposure to inhabitants, in terms of particle ingestion and inhalation, was assessed. Only ingestion-related risk was deemed unacceptable due to the levels of As and Pb.

Nanosized tubular clay minerals as inorganic nanoreactors for energy and environmental applications: A review to fill current knowledge gaps

Modern society pays further and further attention to environmental protection and the promotion of sustainable energy solutions. Heterogeneous photocatalysis is widely recognized as one of the most economically viable and ecologically sound technologies to combat environmental pollution and the global energy crisis. One challenge is finding a suitable photocatalytic material for an efficient process. Inorganic nanotubes have garnered attention as potential candidates due to their optoelectronic properties, which differ from their bulk equivalents. Among them, clay nanotubes (halloysite, imogolite, and chrysotile) are attracting renewed interest for photocatalysis applications thanks to their low production costs, their unique physical and chemical properties, and the possibility to functionalize or dope their structure to enhance charge-carriers separation into their structure. In this review, we provide new insights into the potential of these inorganic nanotubes in photocatalysis. We first discuss the structural and morphological features of clay nanotubes. Applications of photocatalysts based on clay nanotubes across a range of photocatalytic reactions, including the decomposition of organic pollutants, elimination of NOx, production of hydrogen, and disinfection of bacteria, are discussed. Finally, we highlight the obstacles and outline potential avenues for advancing the current photocatalytic system based on clay nanotubes. Our aim is that this review can offer researchers new opportunities to advance further research in the field of clay nanotubes-based photocatalysis with other vital applications in the future.

Nonclassical Growth Mechanism of Double-Walled Metal-Oxide Nanotubes Implying Transient Single-Walled Structures

The formation of imogolite nanotubes is reported to be a kinetic process involving intermediate roof-tile nanostructures. Here, the structural evolution occurring during the synthesis of aluminogermanate double-walled imogolite nanotubes is in situ monitored, thanks to an instrumented autoclave allowing the control of the temperature, the continuous measurement of pH and pressure, and the regular sampling of gas and solution. Chemical analyses confirm the completion of the precursor's conversion with the release of CO2 , ethanol, and dioxane as main side products. The combination of microscopic observations, infrared, and absorption spectroscopies with small and wide-angle X-ray scattering experiments unravel a unique growth mechanism implying transient single-walled nanotubes instead of the self-assembly of stacked proto-imogolite tiles. The growth formation of these transient nanotubes is followed at the molecular level by Quick-X-ray absoprtion specotrscopy experiments. Multivariate data analysis evidences that the near neighboring atomic environment of Ge evolves from monotonous to a more complex one as the reaction progresses. The following transformation into a double-walled nanotube takes place at a nearly constant mean radius, as demonstrated by the simulation of X-ray scattering diagrams. Overall, transient nanotubes appear to serve for the anchoring of a new wall, corresponding to a mechanism radically different from that proposed in the literature.

Wet spinning imogolite nanotube fibres: an in situ process study

Imogolite nanotubes (INTs) form transparent aqueous liquid-crystalline solutions, with strong birefringence and X-ray scattering power. They provide an ideal model system for studying the assembly of one-dimensional nanomaterials into fibres, as well as offering interesting properties in their own right. Here, in situ polarised optical microscopy is used to study the wet spinning of pure INTs into fibres, illustrating the influence of process variables during extrusion, coagulation, washing and drying on both structure and mechanical properties. Tapered spinnerets were shown to be significantly more effective than thin cylindrical channels for forming homogeneous fibres; a result related to simple capillary rheology by fitting a shear thinning flow model. The washing step has a strong influence of structure and properties, combining the removal of residual counter-ions and structural relaxation to produce a less aligned, denser and more networked structure; the timescales and scaling behavior of the processes are compared quantitatively. Both strength and stiffness are higher for INT fibres with a higher packing fraction and lower degree of alignment, indicating the importance of forming a rigid jammed network to transfer stress through these porous, rigid rod assemblies. The electrostatically-stabilised, rigid rod INT solutions were successfully cross-linked using multivalent anions, providing robust gels, potentially useful in other contexts.

Compressibility and Structural Transformations of Aluminogermanate Imogolite Nanotubes under Hydrostatic Pressure

We present in situ pressure experiments on aluminogermanate nanotubes studied by X-ray scattering and absorption spectroscopy measurements. Structural transformations under hydrostatic pressure below 10 GPa are investigated as a function of the morphology, organization, or functionalization of the nanotubes. Radial deformations, ovalization for isolated nanotubes, and hexagonalization when they are bundled are evidenced. Radial collapse of single-walled nanotubes is shown to occur, in contrast to the double-walled nanotubes. The effect of the transmitting pressure medium used on the collapse onset pressure value is demonstrated. Axial Young's moduli are determined for isolated (400 GPa) and bundled (600 GPa) single-walled nanotubes, double-walled nanotubes (440 GPa), and methylated single-walled nanotubes (200 GPa).

Water Organization around Inorganic Nanotubes in Suspension Probed by Polarization-Resolved Second Harmonic Scattering

Imogolite nanotube (INT) is a fascinating one-dimensional (1D) material that can be synthesized in the liquid phase. Its behavior in solution is crucial for many applications and depends on the organization of water at the liquid-wall interface. We study here this water organization by using the nonlinear optical technique of polarization-resolved second harmonic scattering (SHS). A microscopic model is proposed to interpret the origin of the coherent SHS signal recovered in this 1D colloidal system. This work demonstrates that the SHS technique is able to probe the shell of water molecules oriented around the nanotubes. Water organization results from the electric field induced by the nanotube walls, and it is strongly dependent on the ionic strength of the suspension.

A fast one-pot synthesize of crystalline anglesite by hydrothermal synthesis for environmental assessment on pure phase

Anglesite (PbSO₄) is a lead sulfate that belongs to the barite group and is naturally ubiquitous in the environment. This work describes a simple way to synthesize crystalline lead sulfate by using a straightforward hydrothermal procedure. Typically, Pb(NO₃)₂ and Fe₂(SO₄)₃ precursors were mixed and heated at 94 °C for 24 h. The synthesized samples have been characterized by coupling X-Ray diffraction (XRD) to spectroscopic methods (FTIR and micro-Raman), X-ray absorption spectroscopy (XAS), and electronic microscopy (SEM and TEM). In fine, the results about this new well crystalline synthetic anglesite confirm the efficiency and the importance of this cheap protocol and the synthesized phases obtained. Moreover, the environmental stability and bioaccessibility of anglesite have been done to evaluate environmental stability of anglesite under various physico-chemical conditions and sanitary risks. Finally, the paper allows to obtain precise data on a pure phase in order to be able to more easily evaluate and understand the role of anglesite in as-polluted sites and soils.

Effect of Polymer Length on the Adsorption onto Aluminogermanate Imogolite Nanotubes

This study evidences the adsorption of model nonionic polymers onto aluminogermanate imogolite nanotubes, attractive porous nanofillers with potential molecular loading and release applications. We resolve the underlying mechanisms between nanotubes and polyethylene glycols with different molecular weights by means of nanoisothermal titration calorimetry. The analysis of the results provides a direct thermodynamic characterization, allowing us to propose a detailed description of the energetics involved in the formation of polymer/imogolite complexes. The affinity toward the nanotube surface is enthalpy-driven and strongly depends on the polymer chain length, which significantly affects the polymer configuration and the flow properties of the resulting complexes, probed by small-angle neutron scattering and rheology, respectively. These findings open new avenues for the rational design of these hybrid mixtures for advanced applications.

Doping Liquid Crystals of Colloidal Inorganic Nanotubes by Additive-Free Metal Nanoparticles

Doping liquid-crystal phases with nanoparticles is a fast-growing field with potential breakthroughs due to the combination of the properties brought by the two components. One of the main challenges remains the long-term stability of the hybrid system, requiring complex functionalization of the nanoparticles at the expense of their self-assembly properties. Here we demonstrate the successful synthesis of additive-free noble-metal nanoparticles at the surface of charged inorganic nanotubes. Transmission electron microscopy and UV-visible spectroscopy confirm the stabilization of metallic nanoparticles on nanotubes. Meanwhile, the spontaneous formation of liquid-crystals phases induced by the nanotubes is observed, even after surface modification with metallic nanoparticles. Small-angle X-ray scattering experiments reveal that the average interparticle distance in the resulting hybrids can be easily modulated by controlling electrostatic interactions. As a proof-of-concept, we demonstrate the effectiveness of our method for the preparation of homogeneous transparent hybrid films with a high degree of alignment.

Continuous Binder-Free Fibers of Pure Imogolite Nanotubes

Imogolite nanotubes (INTs) display a range of useful properties and provide an ideal material system to study the assembly of nanomaterials into macroscopic fibers. A method of wet spinning pure, binder-free imogolite fibers has been developed using double-walled germanium imogolite nanotubes. The nanotube aspect ratio can be controlled during the initial synthesis and is critical to the spinning process. Fibers made from short nanotubes (<100 nm) have very low gel strengths, while dopes with longer nanotubes (500-1000 nm) are readily spinnable. The tensile behavior of the resulting imogolite nanotube fibers is strongly influenced by relative humidity (RH), with a modulus of 30 GPa at 10% RH compared to 2.8 GPa at 85% RH, as well as a change in failure mode. This result highlights the importance of inter-nanotube interactions in such assemblies and provides a useful strategy for further exploration. Interestingly, in the absence of a matrix phase, a degree of misorientation appears to improve load transfer between the individual INTs within the porous fiber, likely due to an increase in the number of interparticle contacts. Imogolite nanotubes are an appealing analogue to other nanotube fiber systems, and it is hoped that learnings from this system can also be used to improve carbon nanotube fibers.

Inorganic Nanotube Mesophases Enable Strong Self-Healing Fibers

The assembly of one-dimensional nanomaterials into macroscopic fibers can improve mechanical as well as multifunctional performance. Double-walled aluminogermanate imogolite nanotubes are geo-inspired analogues of carbon nanotubes, synthesized at low temperature, with complementary properties. Here, continuous imogolite-based fibers are wet-spun within a poly(vinyl alcohol) matrix. The lyotropic liquid crystallinity of the system produces highly aligned fibers with tensile stiffness and strength up to 24.1 GPa (14.1 N tex^-1) and 0.8 GPa (0.46 N tex^-1), respectively. Significant enhancements over the pure polymer control are quantitatively attributed to both matrix refinement and direct nanoscale reinforcement, by fitting an analytical model. Most intriguingly, imogolite-based fibers show a high degree of healability via evaporation-induced self-assembly, recovering up to 44% and 19% of the original fiber tensile stiffness and strength, respectively. This recovery at high absolute strength highlights a general strategy for the development of high-performance healable fibers relevant to composite structures and other applications.

Solid wetting-layers in inorganic nano-reactors: the water in imogolite nanotube case

By combined use of wide-angle X-ray scattering, thermo-gravimetric analysis, inelastic neutron scattering, density functional theory and density functional theory molecular dynamics simulations, we investigate the structure, dynamics and stability of the water wetting-layer in single-walled aluminogermanate imogolite nanotubes (SW Ge-INTs): an archetypal system for synthetically controllable and monodisperse nano-reactors. We demonstrate that the water wetting-layer is strongly bound and solid-like up to 300 K under atmospheric pressure, with dynamics markedly different from that of bulk water. Atomic-scale characterisation of the wetting-layer reveals organisation of the H₂O molecules in a curved triangular sublattice stabilised by the formation of three H-bonds to the nanotube's inner surface, with covalent interactions sufficiently strong to promote energetically favourable decoupling of the H₂O molecules in the adlayer. The evidenced changes in the local composition, structure, electrostatics and dynamics of the Ge-INT's inner surface upon the formation of the solid wetting-layer demonstrate solvent-mediated functionalisation of the nanotube's cavity at room temperature and pressure, suggesting new strategies for the design of nano-rectors towards potential control of chemical reactivity in nano-confined volumes.

Colloidal Stability of Imogolite Nanotube Dispersions: A Phase Diagram Study

In this article, we revisit the colloidal stability of clay imogolite nanotubes by studying the effect of electrostatic interactions on geo-inspired synthetic nanotubes in aqueous dispersions. The nanotubes in question are double-walled aluminogermanate imogolite nanotubes (Ge-DWINTs) with a well-defined diameter (4.3 nm) and with an aspect ratio around 4. Surface charge properties are assessed by electrophoretic measurements, revealing that the outer surfaces of Ge-DWINT are positively charged up to high pH values. A series of Ge-DWINT dispersions have been prepared by osmotic stress to control both the ionic strength of the dispersion and the volume fraction in nanotubes. Optical observations coupled to small and wide-angle X-ray scattering (SAXS/WAXS) experiments allow us to unravel different nanotube organizations. At low ionic strength (IS < 10^-2 mol L^-1), Ge-DWINTs are fully dispersed in water while they form an arrested gel phase above a given concentration threshold, which shifts toward higher volume fraction with increasing ionic strength. The swelling law, derived from the evolution of the mean intertube distance as a function of the nanotube concentration, evidences a transition from isotropic swelling at low volume fractions to one-dimensional swelling at higher volume fractions. These results show that the colloidal stability of Ge-DWINT is driven by repulsive interactions for ionic strengths lower than 10^-2 mol L^-1. By contrast, higher salt concentrations lead to attractive interactions that destabilize the colloid suspension, inducing nanotube coagulation into larger structures that settle over time or form opaque gels. Detailed simulations of the WAXS diagram reveal that aggregates are mainly formed by an isotropic distribution of small bundles (less than four nanotubes) in which the nanotubes organized themselves in parallel orientation. Altogether, these measurements allow us to give the first overview of the phase diagram of colloidal dispersions based on geo-inspired imogolite-like nanotubes.

Structural resolution of inorganic nanotubes with complex stoichiometry

Determination of the atomic structure of inorganic single-walled nanotubes with complex stoichiometry remains elusive due to the too many atomic coordinates to be fitted with respect to X-ray diffractograms inherently exhibiting rather broad features. Here we introduce a methodology to reduce the number of fitted variables and enable resolution of the atomic structure for inorganic nanotubes with complex stoichiometry. We apply it to recently synthesized methylated aluminosilicate and aluminogermanate imogolite nanotubes of nominal composition (OH)₃Al₂O₃Si(Ge)CH₃. Fitting of X-ray scattering diagrams, supported by Density Functional Theory simulations, reveals an unexpected rolling mode for these systems. The transferability of the approach opens up for improved understanding of structure–property relationships of inorganic nanotubes to the benefit of fundamental and applicative research in these systems.

Structural determination of inorganic nanotubes has lagged far behind that of their carbon-based counterparts. Here, the authors present a transferable methodology, combining wide angle X-ray scattering and computation, to quantitatively resolve the atomic structure of inorganic nanotubes with complex stoichiometry.

Swelling Inhibition of Liquid Crystalline Colloidal Montmorillonite and Beidellite Clays by DNA

Exploring the interaction of nucleic acids with clay minerals is important to understand such issues as the persistence in soils of biomolecules and the appearance of genetic polymers in prebiotic environments. Colloidal dispersions of double stranded DNA and clay nanosheets may also provide interesting model systems to study the statistical physics of mixtures of semi-flexible rods and plates. Here, we show that adding very small amounts of DNA to liquid-crystalline montmorillonite and beidellite smectite clay suspensions strongly widens the isotropic/nematic phase coexistence region. Moreover, a spectroscopic study shows that, upon DNA addition, the first DNA molecules adsorb onto the clay particles. Remarkably, synchrotron small-angle X-ray scattering experiments reveal that the average distance between the clay sheets, in the nematic phase at coexistence, decreases with increasing DNA concentration and that the inhibition of swelling by DNA becomes almost independent of clay concentration. We interpret this DNA-mediated attraction between clay nanosheets by bridging conformations of DNA strands (plates on a string structure). In addition to bridging, DNA chains can form “loops” between sections adsorbed on the same particle, giving rise to sheet repulsions due to protruding loops. This interpretation agrees with the observed inter-clay spacings being dependent only on the DNA concentration.

Intercalated water in multi-layered graphene oxide paper: an X-ray scattering study

X-ray scattering (XRS) experiments have been performed on multi-layered graphene oxide (GO) paper. GO can be easily hydrated as water naturally intercalates in the hydrophilic nanostructure. The effect of the intercalated water on the XRS signals is measured during dehydration under thermal treatment in the temperature range 298–473 K as well as during hydration under saturated water vapour pressure. A simple modelling of the XRS signals by taking into account the presence and the type of intercalated water (bound water or physisorbed water) is introduced. It allows an explanation of the variations of intensity and position of XRS reflections observed experimentally.

Reaction mechanisms in swelling clays under ionizing radiation: influence of the water amount and of the nature of the clay mineral

Picosecond pulse radiolysis experiments performed on natural swelling clays evidence a fast trapping of electrons in the layers of the material.

A new way to apply ultrasound in cross-flow ultrafiltration: application to colloidal suspensions

A new coupling of ultrasound device with membrane process has been developed in order to enhance cross-flow ultrafiltration of colloidal suspensions usually involved in several industrial applications included bio and agro industries, water and sludge treatment. In order to reduce mass transfer resistances induced by fouling and concentration polarization, which both are main limitations in membrane separation process continuous ultrasound is applied with the help of a vibrating blade (20 kHz) located in the feed channel all over the membrane surface (8mm between membrane surface and the blade). Hydrodynamic aspects were also taking into account by the control of the rectangular geometry of the feed channel. Three colloidal suspensions with different kinds of colloidal interaction (attractive, repulsive) were chosen to evaluate the effect of their physico-chemical properties on the filtration. For a 90 W power (20.5 W cm(-2)) and a continuous flow rate, permeation fluxes are increased for each studied colloidal suspension, without damaging the membrane. The results show that the flux increase depends on the initial structural properties of filtered dispersion in terms of colloidal interaction and spatial organizations. For instance, a Montmorillonite Wyoming-Na clay suspension was filtered at 1.5 × 10(5)Pa transmembrane pressure. Its permeation flux is increased by a factor 7.1, from 13.6 L m(-2)h(-1) without ultrasound to 97 L m(-2)h(-1) with ultrasound.

Single-step formation of micron long (OH)3Al2O3Ge(OH) imogolite-like nanotubes

Micron-long germanium-based double-walled imogolite nanotubes were synthesized at high concentrations, as evidenced by cryo-TEM, AFM, SAXS and IR characterization methods. In addition, the spontaneous formation of a liquid-crystalline phase was observed. The novel synthesis route made it possible for the first time to obtain both long and concentrated germanium-based imogolite-like nanotubes in a single step.

Intracellular fate of carbon nanotubes inside murine macrophages: pH-dependent detachment of iron catalyst nanoparticles

BACKGROUND

Carbon nanotubes (CNT) are a family of materials featuring a large range of length, diameter, numbers of walls and, quite often metallic impurities coming from the catalyst used for their synthesis. They exhibit unique physical properties, which have already led to an extensive development of CNT for numerous applications. Because of this development and the resulting potential increase of human exposure, an important body of literature has been published with the aim to evaluate the health impact of CNT. However, despite evidences of uptake and long-term persistence of CNT within macrophages and the central role of those cells in the CNT-induced pulmonary inflammatory response, a limited amount of data is available so far on the CNT fate inside macrophages. Therefore, the overall aim of our study was to investigate the fate of pristine single walled CNT (SWCNT) after their internalization by macrophages.

METHODS

To achieve our aim, we used a broad range of techniques that aimed at getting a comprehensive characterization of the SWCNT and their catalyst residues before and after exposure of murine macrophages: X-ray diffraction (XRD), High Resolution (HR) Transmission Electron Microscopy (TEM), High Angle Annular Dark Field-Scanning TEM (HAADF-STEM) coupled to Electron Energy Loss Spectroscopy (EELS), as well as micro-X-ray fluorescence mapping (μXRF), using synchrotron radiation.

RESULTS

We showed 1) the rapid detachment of part of the iron nanoparticles initially attached to SWCNT which appeared as free iron nanoparticles in the cytoplasm and nucleus of CNT-exposed murine macrophages, and 2) that blockade of intracellular lysosomal acidification prevented iron nanoparticles detachment from CNT bundles and protected cells from CNT downstream toxicity.

CONCLUSIONS

The present results, while obtained with pristine SWCNT, could likely be extended to other catalyst-containing nanomaterials and surely open new ways in the interpretation and understanding of CNT toxicity.

X-ray scattering determination of the structure of water during carbon nanotube filling

We present in situ monitoring of water filling of single-walled carbon nanotubes at room temperature, using X-ray scattering. A systematic method is developed to determine the water radial density profile. Water filling is homogeneous below about 5% in mass, whereas it structures into three layers above. These results should motivate further theoretical and simulations studies and allow getting a better understanding of the very peculiar properties of water confined in hydrophobic environment.

In-situ SAXS study of aqueous clay suspensions submitted to alternating current electric fields

Aqueous colloidal suspensions of clay platelets display a sol/gel transition that is not yet understood. Depending on the nature of the clay, liquid-crystalline behavior may also be observed. For example, the suspensions of beidellite display a nematic phase whereas those of montmorillonite do not. Both beidellite and montmorillonite have a "TOT" structure but the structural electric charge is located in the tetrahedral layer for the former and in the octahedral layer for the latter. We built a setup to perform SAXS experiments on complex fluids submitted to an electric field in situ. We found that the fluid nematic phase of beidellite suspensions readily aligns in the field. However, the field had no influence on the gels, showing that the orientational degrees of freedom of the platelets are effectively frozen. Moreover, strong platelet alignment was induced by the field in the isotropic phase of both clays, in a similar way, regardless of their ability to form a nematic phase. This surprising result would suggest that the orientational degrees of freedom are not directly involved in the sol/gel transition. The ability to induce orientational order in the isotropic phase of clay suspensions can be exploited to prepare materials of controlled anisotropy.

Tailoring highly oriented and micropatterned clay/polymer nanocomposites by applying an a.c. electric field

Clay/polymer nanocomposites have recently raised much interest because of their widespread industrial applications. Nevertheless, controlling both clay platelet exfoliation and orientation during polymerization still remains challenging. Herein, we report the elaboration of clay/polymer nanocomposite hydrogels from aqueous suspensions of natural swelling clays submitted to high-frequency a.c. electric fields. X-ray scattering experiments have confirmed the complete exfoliation of the clay sheets in the polymer matrix, even after polymerization. Moreover, polarized light microscopy shows that the clay platelets were perfectly oriented by the electric field and that this field-induced alignment was frozen in by in situ photopolymerization. This procedure allowed us to not only produce uniformly aligned samples but also pattern platelet orientation, at length scales down to 20 μm. This straightforward and cheap nanocomposite patterning technique can be easily extended to a wide range of natural or synthetic inorganic anisotropic particles.

Aqueous suspensions of natural swelling clay minerals. 2. Rheological characterization

We report in this article a comprehensive investigation of the viscoelastic behavior of different natural colloidal clay minerals in aqueous solution. Rheological experiments were carried out under both dynamic and steady-state conditions, allowing us to derive the elasticity and yield stress. Both parameters can be renormalized for all sizes, ionic strength, and type of clay using in a first approach only the volume of the particles. However, applying such a treatment to various clays of similar shapes and sizes yields differences that can be linked to the repulsion strength and charge location in the swelling clays. The stronger the repulsive interactions, the better the orientation of clay particles in flows. In addition, a master linear relationship between the elasticity and yield stress whose value corresponds to a critical deformation of 0.1 was evidenced. Such a relationship may be general for any colloidal suspension of anisometric particles as revealed by the analysis of various experimental data obtained on either disk-shaped or lath- and rod-shaped particles. The particle size dependence of the sol-gel transition was also investigated in detail. To understand why suspensions of larger particles gel at a higher volume fraction, we propose a very simplified view based on the statistical hydrodynamic trapping of a particle by an another one in its neighborhood upon translation and during a short period of time. We show that the key parameter describing this hydrodynamic trapping varies as the cube of the average diameter and captures most features of the sol-gel transition. Finally, we pointed out that in the high shear limit the suspension viscosity is still closely related to electrostatic interactions and follows the same trends as the viscoelastic properties.

Rheo-SAXS investigation of shear-thinning behaviour of very anisometric repulsive disc-like clay suspensions

Aqueous suspensions of swelling clay minerals exhibit a rich and complex rheological behaviour. In particular, these repulsive systems display strong shear-thinning at very low volume fractions in both the isotropic and gel states. In this paper, we investigate the evolution with shear of the orientational distribution of aqueous clay suspensions by synchrotron-based rheo-SAXS experiments using a Couette device. Measurements in radial and tangential configurations were carried out for two swelling clay minerals of similar morphology and size, Wyoming montmorillonite and Idaho beidellite. The shear evolution of the small angle x-ray scattering (SAXS) patterns displays significantly different features for these two minerals. The detailed analysis of the angular dependence of the SAXS patterns in both directions provides the average Euler angles of the statistical effective particle in the shear plane. We show that for both samples, the average orientation is fully controlled by the local shear stress around the particle. We then apply an effective approach to take into account multiple hydrodynamic interactions in the system. Using such an approach, it is possible to calculate the evolution of viscosity as a function of shear rate from the knowledge of the average orientation of the particles. The viscosity thus recalculated almost perfectly matches the measured values as long as collective effects are not too important in the system.

Aqueous suspensions of natural swelling clay minerals. 1. Structure and electrostatic interactions

In this article, we present a general overview of the organization of colloidal charged clay particles in aqueous suspension by studying different natural samples with different structural charges and charge locations. Small-angle X-ray scattering experiments (SAXS) are first used to derive swelling laws that demonstrate the almost perfect exfoliation of clay sheets in suspension. Using a simple approach based on geometrical constraints, we show that these swelling laws can be fully modeled on the basis of morphological parameters only. The validity of this approach was further extended to other clay data from the literature, in particular, synthetic Laponite. For all of the investigated samples, experimental osmotic pressures can be properly described by a Poisson-Boltzmann approach for ionic strength up to 10(-3) M, which reveals that these systems are dominated by repulsive electrostatic interactions. However, a detailed analysis of the Poisson-Boltzmann treatment shows differences in the repulsive potential strength that are not directly linked to the structural charge of the minerals but rather to the charge location in the structure for tetrahedrally charged clays (beidellite and nontronites) undergoing stronger electrostatic repulsions than octahedrally charged samples (montmorillonites, laponite). Only minerals subjected to the strongest electrostatic repulsions present a true isotropic to nematic phase transition in their phase diagrams. The influence of ionic repulsions on the local order of clay platelets was then analyzed through a detailed investigation of the structure factors of the various clay samples. It appears that stronger electrostatic repulsions improve the liquidlike positional local order.

Orientational microdynamics and magnetic-field-induced ordering of clay platelets detected by 2H NMR spectroscopy

The orientation of montmorillonite clays induced by a static magnetic field is quantified by using (2)H NMR spectroscopy. Indeed, the residual quadrupolar splitting of the (2)H resonance line measured for heavy water is a direct consequence of the specific orientation of the clay platelets in the static magnetic field. In the dilute regime, this residual splitting increases linearly with clay concentration, which confirms that the clay/clay electrostatic repulsions remain negligible by comparison with the diamagnetic coupling of these anisotropic platelets. At higher concentration, the electrostatic repulsion between clay particles markedly enhances the detected splitting. Such enhancement is well predicted by numerical simulations. By varying the size of the clay platelets and the strength of the static magnetic field, it is possible to evaluate the order of magnitude of the diamagnetic susceptibility of these anisotropic colloids.