Effects of temperature and salt concentration on the structural and dynamical features in aqueous solutions of charged triblock copolymers

Effect of Protein–Protein Interactions on Translational Diffusion of Spheroidal Proteins

One of the commonly accepted approaches to estimate protein–protein interactions (PPI) in aqueous solutions is the analysis of their translational diffusion. The present review article observes a phenomenological approach to analyze PPI effects via concentration dependencies of self- and collective translational diffusion coefficient for several spheroidal proteins derived from the pulsed field gradient NMR (PFG NMR) and dynamic light scattering (DLS), respectively. These proteins are rigid globular α-chymotrypsin (ChTr) and human serum albumin (HSA), and partly disordered α-casein (α-CN) and β-lactoglobulin (β-Lg). The PPI analysis enabled us to reveal the dominance of intermolecular repulsion at low ionic strength of solution (0.003–0.01 M) for all studied proteins. The increase in the ionic strength to 0.1–1.0 M leads to the screening of protein charges, resulting in the decrease of the protein electrostatic potential. The increase of the van der Waals potential for ChTr and α-CN characterizes their propensity towards unstable weak attractive interactions. The decrease of van der Waals interactions for β-Lg is probably associated with the formation of stable oligomers by this protein. The PPI, estimated with the help of interaction potential and idealized spherical molecular geometry, are in good agreement with experimental data.

A multimethod approach for analyzing FapC fibrillation and determining mass per length

Amyloid proteins are found in a wide range of organisms owing to the high stability of the β-sheet core of the amyloid fibrils. There are both pathological amyloids involved in various diseases and functional amyloids that play a beneficial role for the organism. The aggregation process is complex and often involves many different species. Full understanding of this process requires parallel acquisition of data by complementary techniques monitoring the time course of aggregation. This is not an easy task, given the often-stochastic nature of aggregation, which can lead to significant variations in lag time. Here, we investigate the aggregation process of the functional amyloid FapC by simultaneous use of four different techniques, namely dynamic light scattering, small-angle x-ray scattering (SAXS), circular dichroism, and Thioflavin T fluorescence. All these approaches are applied to the same FapC sample just after desalting. Our data allow us to construct a master time-course graph showing the same time-course of aggregation by all techniques. This allows us to integrate insights from approaches that report on different structural and length scales. During the lag phase, loosely aggregated oligomers with random-coil structure are formed, which subsequently transform to fibrils without accumulation of additional significant species. Subsequently, the loosely associated protofilaments/subfilaments, which form side by side, mature to more compact fibrils. Furthermore, we determine the mass per length of the mature fibrils, obtaining very similar results by SAXS (33 kDa/nm) and tilted-beam transmission electron microscopy (31 kDa/nm). Transmission electron microscopy showed that the fibrils consist of primarily two protofilaments and similar dimensions of the cross section of the fibrils as revealed by SAXS modeling when the number of protofilaments per fibril was taken into account. Mass per length information underscores the general usefulness of SAXS in fibrillation analysis and provides an important constraint for further modeling the fibril structures.

Block copolymers as bile salt sequestrants: intriguing structures formed in a mixture of an oppositely charged amphiphilic block copolymer and bile salt

To study the formation and characterize the structure of mixed complexes of oppositely charged block copolymers and surfactants are of great significance for practical applications, e.g., in drug carrier formulations that are based on electrostatically assisted assembly. In this context, biocompatible block copolymers and biosurfactants (like bile salts) are particularly interesting. In this work, we report on the co-assembly in dilute aqueous solution between a cationic poly(N-isopropyl acryl amide) (PNIPAM) diblock copolymer and the oppositely charged bile salt surfactant sodium deoxycholate at ambient temperature. The cryogenic transmission electron microscopy (cryo-TEM) experiments revealed the co-existence of two types of co-assembled complexes of radically different morphology and inner structure. They are formed mainly as a result of the electrostatic attraction between the positively charged copolymer blocks and bile salt anions and highlight the potential of using linear amphiphilic block copolymers as bile salt sequestrants in the treatment of bile acid malabsorption and hypercholesterolemia. The first complex of globular morphology has a coacervate core of deoxycholate anions and charged copolymer blocks surrounded by a PNIPAM corona. The second complex has an intriguing tape-like supramolecular morphology of several micrometer in length that is striped in the direction of the long axis. A model is presented in which the stretched cationic blocks of several block copolymers interact electrostatically with the bile salt molecules that are associated to form a zipper-like structure. The tape is covered on both sides by the PNIPAM chains that stabilize the overall complex in solution. In addition to cryo-TEM, the mixed system was investigated in a range of molar charge fractions at a constant copolymer concentration by static light scattering, small angle X-ray scattering, and electrophoretic mobility measurements.

Self-assembly of a hydrophobically end-capped charged amphiphilic triblock copolymer: effects of temperature and salinity

This study elucidates the intricate interplay between hydrophobic and electrostatic interactions in aqueous solutions of a responsive charged triblock copolymer.

Agitation of amyloid proteins to speed aggregation measured by ThT fluorescence: a call for standardization

This retrospective study of protein aggregation measured by Thioflavin T (ThT) fluorescence assay in published literature has assessed protein sensitivity to denaturing conditions that include elevated temperatures, fluctuations in pH, and concentration and, in particular, agitation to induce amyloid structure formation. The dynamic tracking of fluorescence shows a sigmoidal evolution as aggregates form; the resulting kinetics of association have been analyzed to explore the range of aggregation behavior which occurs based on environmental parameters. Comparisons between the experimental results of different groups have been historically difficult due to subtleties of experimental procedures including denaturing temperature, protein type and concentration, formulation differences, and how agitation is achieved. While it is clear that agitation has a strong influence on the driving force for aggregation, the use of magnetic stirring bar or shaker table rotational speed is insufficient to characterize the degree of turbulence produced during shear. The pathway forward in resolving dependence of aggregate formation on shear may require alternative methodologies or better standardization of the experimental protocols.

Synthesis, characterization, and cellular uptake of magnetic nanocarriers for cancer drug delivery

HYPOTHESIS

The absence of targetability is the primary inadequacy of conventional chemotherapy. Targeted drug delivery systems are conceptualized to overcome this challenge. We have designed a targetable magnetic nanocarrier consisting of a superparamagnetic iron oxide (SPIO) core and biocompatible and biodegradable poly(sebacic anhydride)-block-methyl ether poly(ethylene glycol) (PSA-mPEG) polymer shell. The idea is that this type of carriers should facilitate the targeting of cancer cells.

EXPERIMENTS

PSA-mPEG was synthesized with poly-condensation and the in vitro degradation rate of the polymer was monitored by gel permeation chromatography (GPC). The magnetic nanocarriers were fabricated devoid of any surfactants and were capable of carrying high payload of hydrophobic dye. The successful encapsulation of SPIO within the polymer shell was confirmed by TEM. The results we obtained from measuring the size of SPIO loaded in polymeric NPs (SPIO-PNP) by dynamic light scattering (DLS) and iron content measurement of these particles by ICP-MS, indicate that SPIO is the most suitable carrier for cancer drug delivery applications.

FINDINGS

Measuring the hydrodynamic radii of SPIO-PNPs by DLS over one month revealed the high stability of these particles at both body and room temperature. We further investigated the cell viability and cellular uptake of SPIO-PNPs in vitro with MDA-MB-231 breast cancer cells. We found that SPIO-PNPs induce negligible toxicity within a concentration range of 1-2μg/ml. The TEM micrographs of thin cross-sectioned MDA-MBA-231 cells showed internalization of SPIO-PNPs within size range of 150-200nm after 24h. This study has provided a foundation for eventually loading these nanoparticles with anti-cancer drugs for targeted cancer therapy using an external magnetic field.

Self-assembly process of soft ferritin-PNIPAAm conjugate bionanoparticles at polar-apolar interfaces

We describe an in-depth investigation on the dynamics and assembly behavior at polar-apolar interfaces of ferritin-PNIPAAm conjugates (poly-N-isopropylacrylamide). The stabilization of oil-water interfaces by the modified ferritin was investigated by dynamic surface tension measurements and compared to the individual components of the bionanoparticle conjugate, namely, unmodified ferritin and pure PNIMAAm of similar molecular weight. It was found that the modified ferritin, even at a low particle concentration, rapidly reduces the interfacial tension. The difference in interfacial stabilization was also shown by cryo-scanning electron microscopy and scanning force microscopy, which displayed very different morphologies at the polar-apolar interface for the unmodified ferritin, pure PNIPAAm, and the ferritin-PNIPAAm conjugate, respectively. The self-assembly of the ferritin-PNIPAAm was further analyzed by cryo-transmission electron microscopy and fluorescence microscopy, for which a fluorescently labeled polymer was used. Both techniques revealed details on the assembly of the protein-polymer conjugate at the oil-water interface.

Thermogelling properties of triblock copolymers in the presence of hydrophilic Fe3O4 nanoparticles and surfactants

We investigate the supramolecular structure formed by thermogelation of a triblock polymer in the presence of nanoparticles and surfactant using rheometry and small-angle X-ray scattering (SAXS). The triblock copolymer, nanoparticle, and surfactant used in this study are poly(oxyethylene-oxypropylene-oxyethylene), Pluronic F108, Fe(3)O(4) nanoparticles, and sodium dodecyl surfactant, respectively. Addition of 1-5 wt % of Fe(3)O(4) nanoparticle, of average particle size ~10 nm, in a weak template of F108 (15 wt %) shows a decrease in the onset of gelation temperature and dramatic alteration in the viscoelastic moduli. The nanocomposite samples show a linear viscoelastic regime up to 5% strain. The SAXS measurement shows that the intermicellar spacing of the supramolecular structure of pure F108 is ~16.5 nm, and the supramolecular structure is destroyed when nanoparticles and surfactants are incorporated in it. Further, the addition of anionic surfactant to nanocomposites leads to a dramatic reduction in the viscoelastic properties due to strong electrostatic barrier imparted by the surfactant headgroup that prevents the formation of hexagonally ordered micelles. Our results show that the thermogelation is due to the clustering of nanoparticles into a fractal network rather than a close-packed F108 micelles, in agreement with the recent findings in Pluronic F127-laponite systems.

Structure and interactions of charged triblock copolymers studied by small-angle X-ray scattering: dependence on temperature and charge screening

A series of thermo-responsive cationic triblock copolymers composed of methoxy-poly(ethylene glycol) (MPEG, hydrophilic), poly(N-isopropylacrylamide) (PNIPAAM, temperature sensitive), and poly((3-acrylamidopropyl) trimethyl ammonium chloride) (PN(+), cationic) has been investigated as a function of temperature and ionic strength. In the MPEG-b-PNIPAAM-b-PN(+) copolymers, the MPEG block length is constant, and the lengths of the PNIPAAM and PN(+) blocks are varied. The solubility of the PNIPAAM block decreases with increasing temperature, and the triblock copolymer thus provides the possibilities of studying micelles with both neutral and charged blocks in the micelle corona as well as the interplay between these two blocks as the electrostatic interactions are varied by addition of salt. Investigation of the systems by densitometry and small-angle X-ray scattering (SAXS) in a temperature range from 20 to 70 °C gave detailed information on the behavior both below and above the critical micelle temperature (CMT). A clear effect of the addition of salt is observed in both the apparent partial specific volume, obtained from the densitometry measurements, and the SAXS data. Below the CMT, the single polymers can be described as Gaussian chains, for which the repulsive interchain interactions, originating from the charged PN(+) block, have to be taken into account in salt-free aqueous solution. Increasing the salt concentration of the solution to 30 mM NaCl leads to an increase in the apparent partial specific volume, and the electrostatic repulsive interchain interactions between the single polymers vanish. Raising the temperature results in micelle formation, except for the copolymer with only 20 NIPAAM units. The SAXS data show that the polymer with the medium PNIPAAM block length forms spherical micelles, whereas the polymer with the longest PNIPAAM block forms cylindrical micelles. Increasing the temperature further above the CMT results in an increase in the micellar aggregation number for both of the polymers forming spherical and cylindrical micelles. The addition of salt to the solution also influences the aggregates formed above the CMT. Overall, the micelles formed in the salt solution have a smaller cross-section radius than those in aqueous solution without added salt.