Experimental and molecular dynamics investigation into the amphiphilic nature of sulforhodamine B

Three-Dimensional Melt-Electrowritten Polycaprolactone/Chitosan Scaffolds Enhance Mesenchymal Stem Cell Behavior

Melt electrowriting (MEW) is an emerging technique that precisely fabricates microfibrous scaffolds, ideal for tissue engineering, where biomimetic microarchitectural detail is required. Polycaprolactone (PCL), a synthetic polymer, was selected as the scaffold material due to its biocompatibility, biodegradability, mechanical strength, and melt processability. To increase PCL bioactivity, a natural polymer, chitosan, was added to construct MEW fibrous composite scaffolds. To date, this is the first study of its kind detailing the effects of stem cell behavior on PCL containing chitosan MEW scaffolds. The aim of this study was to melt electrowrite a range of PCL/chitosan tissue-engineered constructs (TECs) and assess their suitability to promote the growth of human bone-marrow-derived mesenchymal stem cells (hBMSCs). In vitro physical and biological characterizations of melt-electrowritten TECs were performed. Physical characterization showed that reproducible, layered micron-range scaffolds could be successfully fabricated. As well, cell migration and proliferation were assessed via an assay to monitor cell infiltration throughout the three-dimensional (3D) melt-electrowritten scaffold structure. A statistically significant increase (∼140%) in hBMSC proliferation in 1 wt % chitosan PCL blends in comparison to PCL-only scaffolds was found when monitored over two weeks. Overall, our study demonstrates the fabrication of melt-electrowritten PCL/chitosan composite scaffolds with controlled microarchitecture and their potential use for regenerative, tissue engineering applications.

Temperature Dependence of the Structure and Dynamics of a Dye-Labeled Lipid in a Planar Phospholipid Bilayer: A Computational Study

Fluorescent probes are widely employed to label lipids for the investigation of structural and dynamic properties of model and cell membranes through optical microscopy techniques. Although the effect of tagging a lipid with an organic dye is generally assumed to be negligible, optically modified lipids can nonetheless affect the local lipid structure and, in turn, the lipid lateral mobility. To better assess this potential issue, all-atom (MD) molecular dynamics simulations have been performed to study structural and dynamic effects in a model DOPC membrane in the presence of a standard Rhodamine B-labeled DOPE lipid (RHB) as a function of temperature, i.e., 293 K, 303 K, and 320 K. As the temperature is increased, we observe similar changes in the structural properties of both pure DOPC and RHB-DOPC lipid bilayers: an increase of the area per lipid, a reduction of the membrane thickness and a decrease of lipid order parameters. The partial density profile of the RHB headgroups and their orientation within the lipid bilayer confirm the amphiphilic nature of the RHB fluorescent moiety, which mainly partitions in the DOPC glycerol backbone region at each temperature. Moreover, at all temperatures, our results on lipid lateral diffusion support a non-neutral role of the dye with respect to the unlabeled lipid mobility, thus suggesting important implications for optical microscopy studies of lipid membranes.

Character of Localization and Microenvironment of Solvatochromic Reichardt's Betaine Dye in Sodium n-Dodecyl Sulfate and Cetyltrimethylammonium Bromide Micelles: Molecular Dynamics Simulation Study

The problem of using surfactant micellar aqueous solutions as reaction media centers on estimating the polarity of the micellar pseudophase. The most popular approach is the utilization of solvatochromic dyes. Among the last, the strongest ones are the dipolar pyridinium N-phenolate dyes. The complication of such approach, however, consists in the nonuniform character of the environment of the indicator fixed in the micellar pseudophase. The aim of this study is to reveal the character of localization and orientation of the standard solvatochromic pyridinium N-phenolate dye, 4-(2,4,6-triphenylpyridinium-1-yl)-2,6-diphenylphenolate, the so-called Reichardt's dye, within the micellar pseudophase of an anionic (sodium n-dodecyl sulfate, SDS) and cationic (cetyltrimethylammonium bromide, CTAB) surfactants using MD simulations. The locus and hydration of the dye are found to be dependent on the surfactant nature. New approaches are proposed to quantitatively describe the state of the dye within the pseudophase. The results confirm the experimental data, which indicate the higher polarity of the interfacial region in the case of the SDS micelles. Because this dye is also used as an interfacial acid-base probe, the corresponding study is simultaneously performed for its protonated, i.e., cationic form. The neutral and protonated forms of the dye are found to be localized and hydrated in a different way in both SDS and CTAB micelles. This should be taken into account when using the Reichardt's dye as an acid-base indicator for estimating the electrical surface potential of micelles. The presented approach may be recommended to shed light upon the locus of other solvatochromic and acid-base indicators in micelles and micellar-like aggregates.

Improving molecularly imprinted nanogels by pH modulation

Non-specific binding between template molecule and the imprinted gel is significantly reduced by pH modulation.

Theranostic nanoemulsions: codelivery of hydrophobic drug and hydrophilic imaging probe for cancer therapy and imaging

Aim: To develop a theranostic nanoemulsion (TNE) that can codeliver the conjugates of a hydrophobic drug paclitaxel (PTX) and a hydrophilic imaging probe sulforhodamine B (SRB). Materials & methods: The TNE was established using core-matched technology, and can achieve high encapsulation efficiency and synchronized release of the loaded cargo. It has been examined for a correlation between the dynamic uptake of PTX and the intensity of SRB imaging signal in different organs. Results & discussion: Our data demonstrate that the TNE, with improved circulation time, increases therapeutic efficacy and imaging efficiency in both drug-sensitive and drug-resistant cancer. The TNE could not satisfy the demand of visual diagnosis in the living animal because of interference. We therefore formulated a long-circulating theranostic nanoemulsion (LCTNE). Results showed that the LCTNE can meet imaging requirements in vivo. Conclusion: The LCTNE plays a good therapeutic and diagnostic role for subcutaneous tumors in the living animal.

Sulforhodamine B interacts with albumin to lower surface tension and protect against ventilation injury of flooded alveoli

In the acute respiratory distress syndrome, alveolar flooding by proteinaceous edema liquid impairs gas exchange. Mechanical ventilation is used as a supportive therapy. In regions of the edematous lung, alveolar flooding is heterogeneous, and stress is concentrated in aerated alveoli. Ventilation exacerbates stress concentrations and injuriously overexpands aerated alveoli. Injury degree is proportional to surface tension, T. Lowering T directly lessens injury. Furthermore, as heterogeneous flooding causes the stress concentrations, promoting equitable liquid distribution between alveoli should, indirectly, lessen injury. We present a new theoretical analysis suggesting that liquid is trapped in discrete alveoli by a pressure barrier that is proportional to T. Experimentally, we identify two rhodamine dyes, sulforhodamine B and rhodamine WT, as surface active in albumin solution and investigate whether the dyes lessen ventilation injury. In the isolated rat lung, we micropuncture a surface alveolus, instill albumin solution, and obtain an area with heterogeneous alveolar flooding. We demonstrate that rhodamine dye addition lowers T, reduces ventilation-induced injury, and facilitates liquid escape from flooded alveoli. In vitro we show that rhodamine dye is directly surface active in albumin solution. We identify sulforhodamine B as a potential new therapeutic agent for the treatment of the acute respiratory distress syndrome.

Bubble bursting as an aerosol generation mechanism during an oil spill in the deep-sea environment: molecular dynamics simulations of oil alkanes and dispersants in atmospheric air/salt water interfaces

Potential of mean force (PMF) calculations and molecular dynamics (MD) simulations were performed to investigate the properties of oil n-alkanes [i.e., n-pentadecane (C15), n-icosane (C20) and n-triacontane (C30)], as well as several surfactant species [i.e., the standard anionic surfactant sodium dodecyl sulfate (SDS), and three model dispersants similar to the Tween and Span species present in Corexit 9500A] at air/salt water interfaces. This study was motivated by the 2010 Deepwater Horizon (DWH) oil spill, and our simulation results show that, from the thermodynamic point of view, the n-alkanes and the model dispersants have a strong preference to remain at the air/salt water interface, as indicated by the presence of deep free energy minima at these interfaces. The free energy minimum of these n-alkanes becomes deeper as their chain length increases, and as the concentration of surfactant species at the interface increases. The n-alkanes tend to adopt a flat orientation and form aggregates at the bare air/salt water interface. When this interface is coated with surfactants, the n-alkanes tend to adopt more tilted orientations with respect to the vector normal to the interface. These simulation results are consistent with the experimental findings reported in the accompanying paper [Ehrenhauser et al., Environ. Sci.: Processes Impacts 2013, in press, (DOI: 10.1039/c3em00390f)]. The fact that these long-chain n-alkanes show a strong thermodynamic preference to remain at the air/salt water interfaces, especially if these interfaces are coated with surfactants, makes these species very likely to adsorb at the surface of bubbles or droplets and be ejected to the atmosphere by sea surface processes such as whitecaps (breaking waves) and bubble bursting. Finally, the experimental finding that more oil hydrocarbons are ejected when Corexit 9500A is present in the system is consistent with the deeper free energy minima observed for the n-alkanes at the air/salt water interface at increasing concentrations of surfactant species.

Amphipath-induced plasma membrane curvature controls microparticle formation from adipocytes: novel therapeutic implications for metabolic disorders

Microparticles produced from the membrane surface of adipocytes promote lipid biosynthesis and angiogenesis in adipose tissues. Thus, they are deeply associated with the onset of metabolic disorders. Despite our understanding of their roles in physiological or pathological responses, we know little about the mechanism by which microparticles are produced from adipocytes. Based on our previous studies using rat megakaryocytes or mast cells during exocytosis, we proposed that membrane curvature induced by amphiphilic reagents, such as chlorpromazine or salicylate, facilitate or inhibit the formation of microparticles. Since the plasma membranes in adipocytes share many common biophysiological features with those in megakaryocytes or mast cells during exocytosis, the same stimulatory or inhibitory mechanism of microparticle formation would exist in adipocytes. Therefore, we hypothesize here that amphiphilic reagents would also change the membrane curvature in adipocytes, and that such changes would facilitate or inhibit the microparticle formation from adipocytes. Our hypothesis is unique because it sheds light for the first time on the physiological mechanism by which microparticles are produced in adipocytes. It is also important because the idea could have novel therapeutic implications for metabolic disorders that are triggered by increases in the microparticle formation.

Physically facilitating drug-delivery systems

Facilitated/modulated drug-delivery systems have emerged as a possible solution for delivery of drugs of interest to pre-allocated sites at predetermined doses for predefined periods of time. Over the past decade, the use of different physical methods and mechanisms to mediate drug release and delivery has grown significantly. This emerging area of research has important implications for development of new therapeutic drugs for efficient treatments. This review aims to introduce and describe different modalities of physically facilitating drug-delivery systems that are currently in use for cancer and other diseases therapy. In particular, delivery methods based on ultrasound, electrical, magnetic and photo modulations are highlighted. Current uses and areas of improvement for these different physically facilitating drug-delivery systems are discussed. Furthermore, the main advantages and drawbacks of these technologies reviewed are compared. The review ends with a speculative viewpoint of how research is expected to evolve in the upcoming years.

A physical mechanism to explain the delivery of chemical penetration enhancers into skin during transdermal sonophoresis - Insight into the observed synergism

The synergism between low-frequency sonophoresis (LFS) and chemical penetration enhancers (CPEs), especially surfactants, in transdermal enhancement has been investigated extensively since this phenomenon was first observed over a decade ago. In spite of the identifying that the origin of this synergism is the increased penetration and subsequent dispersion of CPEs in the skin in response to LFS treatment, to date, no mechanism has been directly proposed to explain how LFS induces the observed increased transport of CPEs. In this study, we propose a plausible physical mechanism by which the transport of all CPEs is expected to have significantly increased flux into the localized-transport regions (LTRs) of LFS-treated skin. Specifically, the collapse of acoustic cavitation microjets within LTRs induces a convective flux. In addition, because amphiphilic molecules preferentially adsorb onto the gas/water interface of cavitation bubbles, amphiphiles have an additional adsorptive flux. In this sense, the cavitation bubbles effectively act as carriers for amphiphilic molecules, delivering surfactants directly into the skin when they collapse at the skin surface as cavitation microjets. The flux equations derived for CPE delivery into the LTRs and non-LTRs during LFS treatment, compared to that for untreated skin, explain why the transport of all CPEs, and to an even greater extent amphiphilic CPEs, is increased during LFS treatment. The flux model is tested with a non-amphiphilic CPE (propylene glycol) and both nonionic and ionic amphiphilic CPEs (octyl glucoside and sodium lauryl sulfate, respectively), by measuring the flux of each CPE into untreated skin and the LTRs and non-LTRs of LFS-treated skin. The resulting data shows very good agreement with the proposed flux model.