Diffusional Transport of Ions in Plasticized Anion-Exchange Membranes

The Use of Polymer Membranes for the Recovery of Copper, Zinc and Nickel from Model Solutions and Jewellery Waste

A polymeric inclusion membrane (PIM) consisting of matrix CTA (cellulose triacetate), ONPPE (o-nitrophenyl pentyl ether) and phosphonium salts (Cyphos 101, Cyphos 104) was used for separation of Cu(II), Zn(II) and Ni(II) ions. Optimum conditions for metal separation were determined, i.e., the optimal concentration of phosphonium salts in the membrane, as well as the optimal concentration of chloride ions in the feeding phase. On the basis of analytical determinations, the values of parameters characterizing transport were calculated. The tested membranes most effectively transported Cu(II) and Zn(II) ions. The highest recovery coefficients (RF) were found for PIMs with Cyphos IL 101. For Cu(II) and Zn(II), they are 92% and 51%, respectively. Ni(II) ions practically remain in the feed phase because they do not form anionic complexes with chloride ions. The obtained results suggest that there is a possibility of using these membranes for separation of Cu(II) over Zn(II) and Ni(II) from acidic chloride solutions. The PIM with Cyphos IL 101 can be used to recover copper and zinc from jewellery waste. The PIMs were characterized by AFM and SEM microscopy. The calculated values of the diffusion coefficient indicate that the boundary stage of the process is the diffusion of the complex salt of the metal ion with the carrier through the membrane.

PVC/EVA-based polymer inclusion membranes with improved stability and Cr(VI) extraction capacity: Water plasticization effect

Polymer inclusion membranes (PIMs) are far investigated for their ability to extract heavy metals and small organic compounds from aqueous media. Polyvinyl chloride (PVC) is one of the most widely used base polymers for the PIM elaboration. However, its use requires the incorporation of a relatively expensive liquid plasticizer. In the present work, poly(ethylene-co-vinyl acetate) (EVA) serves as a polymer plasticizer for the elaboration of PIMs based on PVC as a base polymer and Aliquat 336 as a carrier. The composition of PIMs was optimized in terms of the PVC/EVA ratio and the vinyl acetate (VA) groups content (x) of EVA (i.e. EVA_x). Physical-chemical properties of the resulting membranes are analyzed and correlated with their structure. The results of SEM analysis revealed miscible PVC/EVA₇₀ blends (i.e. with 70 wt% of VA groups) and partially miscible PVC/EVA₄₀ blends. The plasticizing effect of the EVA copolymer was confirmed by the tensile test results. The results of transport measurements showed that PIMs containing EVA₄₀ and PVC are more efficient for the Cr(VI) extraction than those with only PVC. Thus, EVA₄₀ can effectively replace the conventional liquid plasticizers while improving the Cr(VI) permeability. Besides, it is stated that EVA₄₀-based PIMs are more stable as compared with conventional PIMs due to the water plasticizing effect. After the membrane optimization, the highest Cr(VI) transport flux (54.7 µmol·m^-2·s^-1) was measured. Moreover, the addition of 10 wt% of tetradecanol causes the increase of the water plasticizing effect and allows obtaining a PIM with high stability (up to 24 cycles) required for the membrane long-term operation.

Facilitated Transport of Copper(II) across Polymer Inclusion Membrane with Triazole Derivatives as Carrier

This study investigates copper(II) ion transport through a polymer inclusion membrane (PIM) containing 1-alkyl-1,2,4-triazole (n = 8, 9, 10, 11, 12, 14), o-nitrophenyl octyl ether as the plasticizer and cellulose triacetate as the polymer matrix. The feeding phase was a solution of 0.1 mol/dm³CuCl₂ and an equimolar (0.1 mol/dm³) mixture of copper, nickel, and cobalt chlorides with varying concentrations of chloride anions (from 0.5 to 5.0 mol/dm³) established with NaCl. The receiving phase was demineralized water. The flow rate of the source and receiving phases through the membrane module was within the range from 0.5 cm³/min to 4.5 cm³/min. The tests were carried out at temperatures of 20, 30, 40 and 50 °C. Transport of NaCl through the membrane was excluded for the duration of the test. It was noted that the flow rate through the membrane changes depending on the length of the carbon chain in the alkyl substituent from 16.1 μmol/(m²s) to 1.59 μmol/(m²s) in the following order: C₈> C₉> C₁₀> C₁₁> C₁₂> C₁₄. The activation energy was 71.3 ± 3.0 kJ/mol, indicating ion transport through the PIM controlled with a chemical reaction. Results for transport in case of the concurrent separation of copper(II), nickel(II), and cobalt(II) indicate a possibility to separate them in a selective manner.

Interesting fluorine anion water clusters [F−·(H2O)n] in metal complex crystals

Three crystalline complexes containing fluorine anion water cluster were reported. The fluoride anions and water molecules are H-bonded to each other in an alternating fashion within the fluoride–water hybrid cluster, where a fluoride anion plays the important role.

A fluorophore-labelled copper complex: crystal structure, hybrid cyclic water-perchlorate cluster and biological properties

A fluorophore-labelled copper(II) complex, aquabis(dimethylformamide-κO)(perchlorato-κO)[2-(quinolin-2-yl)-1,3-oxazolo[4,5-f][1,10]phenanthroline]copper(II) perchlorate monohydrate, [Cu(ClO₄)(C₂₂H₁₂N₄O)(C₃H₇NO)₂(H₂O)]ClO₄·H₂O, has been synthesized and characterized. A cyclic hydrogen-bonded water-perchlorate anionic cluster, i.e. [(ClO₄)₂(H₂O)₂]^2-, has been identified within the structure. Each cyclic anionic cluster unit is interconnected by hydrogen bonding to the cation. The cations join into an infinite hydrogen-bonded chain running in the [010] direction. Furthermore, interaction of the complex with calf-thymus DNA (CT-DNA) and cellular localization within the cells was explored. Spectroscopic studies indicate that the compound has a good affinity for DNA and stains the nucleus of the cells.

An infinite two-dimensional hybrid water-chloride network in a 4'-(furan-2-yl)-2,2':6',2''-terpyridine nickel(II) matrix

A new complex, namely bis-[4'-(furan-2-yl)-2,2':6',2''-terpyridine]-nickel(II) dichloride deca-hydrate, [Ni(C19H13N3O)2]Cl2·10H2O, has been crystallized by solvent evaporation and characterized by single-crystal X-ray diffraction. The coordination environment of the NiII cation is distorted octa-hedral with slight deviations from an idealized geometry. The most intriguing structural feature is an infinite two-dimensional hybrid water-chloride network parallel to (011) constructed by O-H⋯O and O-H⋯Cl hydrogen bonds involving two independent chloride ions and ten independent solvent water mol-ecules with an l-shaped pattern. One of the furyl rings is disordered with a refined occupancy ratio of 0.786 (13):0.214 (13).

Immobilized materials for removal of toxic metal ions from surface/groundwaters and aqueous waste streams

Heavy metals from industrial processes are of special concern because they produce chronic poisoning in the aquatic environment. More strict environmental regulations on the discharge of toxic metals require the development of various technologies for their removal from polluted streams (i.e. industrial wastewater, mine waters, landfill leachate, and groundwater). The separation of toxic metal ions using immobilized materials (novel sorbents and membranes with doped ligands), due to their high selectivity and removal efficiency, increased stability, and low energy requirements, is promising for improving the environmental quality. This critical review is aimed at studying immobilized materials as potential remediation agents for the elimination of numerous toxic metal (e.g. Pb, Cd, Hg, and As) ions from polluted streams. This study covers the general characteristics of immobilized materials and separation processes, understanding of the metal ion removal mechanisms, a review of the application of immobilized materials for the removal of toxic metal ions, as well as the impacts of various parameters on the removal efficiency. In addition, emerging trends and opportunities in the field of remediation technologies using these materials are addressed.