Ammonia Plasma Treated Polyethylene Films for Adsorption or Covalent Immobilization of Trypsin: Quantitative Correlation between X-ray Photoelectron Spectroscopy Data and Enzyme Activity

Controlled Primary Amine-Enriched SG-Bonded Papain Surface: Synthesis, Characterization, and Extraction of Protonated Dichromate

The single-step synthesis of nitro-derivatized SG using dimethyldichlorosilane in an aprotic solvent dichloromethane at 300 K is efficient and straightforward. Reduction and diazotization effectively functionalize the material for enzyme coupling at the O-carbon of the enzyme's tyrosine. The high extraction efficiency of protonated dichromate ions with a breakthrough capacity of 480 μmol·g-1 is notable. Eco-friendly elution using distilled water achieves a significant enrichment factor of 23.2. Excellent reusability (up to 900 cycles) and stable sorption efficiency (ζ ≥ 0.9) highlight the material's potential for practical applications and future research.

Chemically Bonded Pepsin via Its Inert Center to Diazo Functionalized Silica Gel through Multipoint Attachment Mode: A Way of Restoring Biocatalytic Sustainability over "Wider pH" Range

Proteolytic enzymes play a pivotal role in the industry. Still, because of denaturation, the extensive applicability at their level of best catalytic efficiency over a more comprehensive pH range, particularly in alkaline conditions over pH 8, has not been fully developed. On the other hand, enzyme immobilization following a suitable protocol is a long pending issue that determines the conformational stability, specificity, selectivity, enantioselectivity, and activity of the native enzymes at long-range pH. As a bridge between these two findings, in an attempt at a freezing temperature 273-278 K at an alkaline pH, the diazo-functionalized silica gel (SG) surface has been used to rapidly diazo couple pepsin through its inert center, the O-carbon of the phenolic -OH of surface-occupied Tyr residues in a multipoint mode: when all the various protein groups, viz., amino, thiol, phenol, imidazole, carboxy, etc., in the molecular sequence including those belonging to the active sites, remain intact, the inherent inbuilt interactions among themselves remain. Thereby, the macromolecule's global conformation and helicity preserve the status quo. The dimension of the SG-enzyme conjugate confirms as {Si(OSi)4 (H2O)1.03}n {-O-Si(CH3)2-O-C6H4-N═N+}4·{pepsin}·yH2O; where the values of n and y have been determined respectively as 347 and 188. The material performs the catalytic activity much better at 7-8.5 than at pH 2-3.5 and continues for up to six months without any appreciable change.

Grafting of proteins onto polymeric surfaces: A synthesis and characterization challenge

This review aims at answering the following question: how can a researcher be sure to succeed in grafting a protein onto a polymer surface? Even if protein immobilization on solid supports has been used industrially for a long time, hence enabling natural enzymes to serve as a powerful tool, emergence of new supports such as polymeric surfaces for the development of so-called intelligent materials requires new approaches. In this review, we introduce the challenges in grafting protein on synthetic polymers, mainly because compared to hard surfaces, polymers may be sensitive to various aqueous media, depending on the pH or reductive molecules, or may exhibit state transitions with temperature. Then, the specificity of grafting on synthetic polymers due to difference of chemical functions availability or difference of physical properties are summarized. We present next the various available routes to covalently bond the protein onto the polymeric substrates considering the functional groups coming from the monomers used during polymerization reaction or post-modification of the surfaces. We also focus our review on a major concern of grafting protein, which is avoiding the potential loss of function of the immobilized protein. Meanwhile, this review considers the different methods of characterization used to determine the grafting efficiency but also the behavior of enzymes once grafted. We finally dedicate the last part of this review to industrial application and future prospective, considering the sustainable processes based on green chemistry.

Multipoint Immobilization at Inert Center of Papain on Homo-Functional Diazo-Activated Silica Support: A Way of Restoring "Above Room-Temperature" Bio-Catalytic Sustainability

Although enzymes play a significant role in industrial applications, their potential usage at high-level efficiency, particularly above room temperature, has not yet been fully harnessed. It brings above room-temperature catalytic sustainability of an immobilized (imm.) bio-catalyst as a long pending issue to improve enzyme stability, activity, specificity, or selectivity, particularly the enantio-selectivity over the native-enzymes. At this juncture, in a robust methodology, a heterogeneous solid phase bio-catalyst, {Si(OSi)₄(H₂O)_1.03}_n=328{OSi(CH₃)₂-NH-C₆H₄-N═N}₄{papain}(H₂O)₂₅₁, has efficiently been prepared by immobilizing papain on homo-functionalized SG (silica-gel) via multipoint covalent attachment. The bio-catalyst is easy to be recovered and reused multiple times. The homo-functional -N═N⁺, which appears on the SG-surface, makes the multipoint diazo-links with the inert center of the tyrosine-moiety to couple the enzyme where all the amino, thiol, phenol, and so forth, groups of the protein, including those that belong to the active-site, remain intact. The immobilized enzyme (13.9 μmol g^-1) swims in pore-water within the pore-channel, remains stable up to 70 ± 5 °C, and exhibits wider temperature adaptability in performing its hydrolyzing activities. The relative activity, 78 ± 2% at 27 °C, remains quantitative for 60 days and can be reused for 60 cycles with 53% activity at room-temperature. The thermal (relative activity: 87%; incubated at 70 ± 5 °C for 24 h) and mechanical (relative activity: 92%; incubated at 2500 rpm for 2 h at 27 °C) stability was outstanding.

Removal of nickel and copper ions in strongly acidic conditions by in-situ formed amyloid fibrils

The research investigated a novel strategy that can synchronously remove Ni²⁺ and Cu²⁺ by synthesizing amyloid fibrils under harsh conditions. The adsorption capacity of Ni²⁺ and Cu²⁺ increased by 18.5% and 34.1% respectively in the in-situ scenario as compared to that Ni²⁺ and Cu²⁺ were introduced after amyloid fibrils preparation, meantime, it avoids the generation of acidic waste liquid in the process of preparing amyloid fibrils. The adsorption behaviors of Ni²⁺ and Cu²⁺ can be well described by the pseudo-second-order kinetic model and Langmuir isotherm. The functional groups of amide, hydroxyl, and carboxyl played determining roles in the adsorption process. Moreover, when the amyloid fibrils were prepared in the presence of Ni²⁺ and Cu²⁺, i.e., the in-situ adsorption scenario, metal ions tended to occupy the functional sites, inhibit protein aggregation, and affect long amyloid fibrils synthesis accordingly. Metal ion-binding site prediction server was used to predict the binding sites of metal ions towards the protein sequence within amyloid fibrils, and the metal ion was observed to preferentially bind to a particular residue such as glutamic acid, cysteine, and serine. The amyloid fibrils be potentially valuable for the removal of heavy metals in strongly acidic wastewater such as acidic mining drainage.

Direct Exposure of Dry Enzymes to Atmospheric Pressure Non-Equilibrium Plasmas: The Case of Tyrosinase

The direct interaction of atmospheric pressure non-equilibrium plasmas with tyrosinase (Tyr) was investigated under typical conditions used in surface processing. Specifically, Tyr dry deposits were exposed to dielectric barrier discharges (DBDs) fed with helium, helium/oxygen, and helium/ethylene mixtures, and effects on enzyme functionality were evaluated. First of all, results show that DBDs have a measurable impact on Tyr only when experiments were carried out using very low enzyme amounts. An appreciable decrease in Tyr activity was observed upon exposure to oxygen-containing DBD. Nevertheless, the combined use of X-ray photoelectron spectroscopy and white-light vertical scanning interferometry revealed that, in this reactive environment, Tyr deposits displayed remarkable etching resistance, reasonably conferred by plasma-induced changes in their surface chemical composition as well as by their coffee-ring structure. Ethylene-containing DBDs were used to coat tyrosinase with a hydrocarbon polymer film, in order to obtain its immobilization. In particular, it was found that Tyr activity can be fully retained by properly adjusting thin film deposition conditions. All these findings enlighten a high stability of dry enzymes in various plasma environments and open new opportunities for the use of atmospheric pressure non-equilibrium plasmas in enzyme immobilization strategies.

Modification of Polyethylene by RF Plasma in Different/Mixture Gases

Herein, low-density polyethylene (LDPE) films were treated using radio-frequency plasma discharge in the presence of air, nitrogen, oxygen, argon, and their mixtures to introduce new chemical functionalities. The surface properties of treated LDPE were qualitatively and quantitatively characterized using various analytical and microscopic techniques. It was found that the optimum plasma treatment for LDPE occurs in the presence of air plasma at an exposure time of 120 s and 80 W of nominal power. The plasma formed layer had tendency to increasing thickness with increasing treatment time up to 60 s using air and oxygen and even more with inert gases. An aging study of plasma-treated LDPE samples stored in ambient air or water medium revealed the partial hydrophobic recovery.

A novel strategy to immobilize enzymes on microporous membranes via dicarboxylic acid halides

A simple and efficient enzyme immobilization strategy on microporous membrane surfaces using dicarboxylic acid halides as a spacer offers a tool to design membranes used in enzymatic membrane reactors.

Mini-review: Antimicrobial peptides and enzymes as promising candidates to functionalize biomaterial surfaces

Biomaterial-associated infections remain a serious concern in modern healthcare. The development of materials that can resist or prevent bacterial attachment constitutes a promising approach to dealing with this problem. Antimicrobial peptides (AMPs) and enzymes have been recognized as promising candidates for the new generation of antimicrobial surfaces. AMPs have been the focus of great interest in recent years owing to a low propensity for developing bacterial resistance, broad-spectrum activity, high efficacy at very low concentrations, target specificity, and synergistic action with classical antibiotics. Biofilm-dispersing enzymes have been shown to inhibit biofilm formation, detach established biofilm, and increase biofilm susceptibility to other antimicrobials. This review critically examines the potential of these protein-like compounds for developing antibacterial coatings by reporting their immobilization into different substrata using different immobilization strategies.

Antibacterial surfaces developed from bio-inspired approaches

Prevention of bacterial adhesion and biofilm formation on the surfaces of materials is a topic of major medical and societal importance. Various synthetic approaches based on immobilization or release of bactericidal substances such as metal derivatives, polyammonium salts and antibiotics were extensively explored to produce antibacterial coatings. Although providing encouraging results, these approaches suffer from the use of active agents which may be associated with side-effects such as cytotoxicity, hypersensibility, inflammatory responses or the progressive alarming phenomenon of antibiotic resistance. In addition to these synthetic approaches, living organisms, e.g. animals and plants, have developed fascinating strategies over millions of years to prevent efficiently the colonization of their surfaces by pathogens. These strategies have been recently mimicked to create a new generation of bio-inspired biofilm-resistant surfaces. In this review, we discuss some of these bio-inspired methods devoted to the development of antibiofilm surfaces. We describe the elaboration of antibacterial coatings based on natural bactericidal substances produced by living organisms such as antimicrobial peptides, bacteriolytic enzymes and essential oils. We discuss also the development of layers mimicking algae surfaces and based on anti-quorum-sensing molecules which affect cell-to-cell communication. Finally, we report on very recent strategies directly inspired from marine animal life and based on surface microstructuring.