Tuning the photophysical properties of pyrene-based systems: a theoretical study

Synthesis, Photophysical and Electronic Properties of a D-π-A Julolidine-Like Pyrenyl-o-Carborane

We synthesized 2-(1-1,2-dicarbadodecaboranyl(12))-6,6,12,12-tetramethyl-7,8,11,12-tetrahydro-6H,10H-phenaleno[1,9-fg]pyrido[3,2,1-ij]quinoline (4), a julolidine-like pyrenyl-o-carborane, with pyrene substituted at the 2,7-positions on the HOMO/LUMO nodal plane. Using solid state molecular structures, photophysical data, cyclic voltammetry, DFT and LR-TDDFT calculations, we compare o-carborane and B(Mes)2 (Mes=2,4,6-Me3C6H2) as acceptor groups. Whereas the π-acceptor strength of B(Mes)2 is sufficient to drop the pyrene LUMO+1 below the LUMO, the carborane does not do this. We confirm the π-donor strength of the julolidine-like moiety, however, which raises the pyrene HOMO-1 above the HOMO. In contrast to the analogous pyrene-2-yl-o-carborane, 2-(1-1,2-dicarbadodecaboranyl(12))-pyrene VI, which exhibits dual fluorescence, because the rate of internal conversion between locally-excited (LE) and charge transfer (CT) (from the pyrene to the carborane) states is faster than the radiative decay rate, leading to a thermodynamic equilibrium between the 2 states, 4 shows only single fluorescence, as the CT state involving the carborane as the acceptor moiety in not kinetically accessible, so a more localized CT emission involving the julolidine-like pyrene moiety is observed.

Enhancing the charge transport and luminescence properties of ethyl 4-[(E)-(2-hydroxy-4-methoxyphenyl)methyleneamino]benzoate through complexation: a DFT and TD-DFT study

Organic light emitting diode (OLED) and organic solar cell (OSC) properties of ethyl 4-[(E)-(2-hydroxy-4-methoxyphenyl)methyleneamino]benzoate (EMAB) and its Pt2+, Pd2+, Ni2+, Ir3+, Rh3+, and Zn2+ complexes have been theoretically studied herein. Geometry optimizations have been performed via the r2SCAN-3c composite method while single-point calculations have been carried out at the PBE0-D3(BJ)/def2-TZVP level of theory. Results have shown that complexation with selected metal ions improves hole and electron transfer rates in Pt[EMAB]2 and Rh[EMAB]2 +. Specifically, the hole transport rate of Pt[EMAB]2, (k ct(h) = 6.15 × 1014 s-1), is found to be 44 times greater than that of [EMAB], (k ct(h) = 1.42 × 1013 s-1), whereas electron transport rate of Pt[EMAB]2, (k ct(e) = 4.6 × 1013 s-1) is 4 times that of EMAB (k ct(e) = 1.1 × 1013 s-1). Charge mobility for holes and electrons are equal to 19.182 cm2 V-1 s-1 and 1.431 cm2 V-1 s-1 respectively for Pt[EMAB]2, and equal to 4.11 × 10-1 cm2 V-1 s-1 and 3.43 × 10-1 cm2 V-1 s-1 for EMAB respectively. These results show that, charge transport in EMAB can be tuned for better performance through complexation with transition metals such as Pt2+. OSC properties of the complexes were also studied by comparing their HOMO/LUMO energies with those of (6,6)-phenyl-C61-butyric acid methyl ester (PCBM) and poly(3-hexylthiophene) (P3HT). It turned out that the energy gap of EMAB reduced significantly upon complexation from 2.904 eV to 0.56 eV in [Rh(EMAB)2]+ and to a lesser extent in the other complexes. The energy values of the HOMOs remained higher than those of PCBM while those of the LUMOs were found to be greater than that of P3HT with the exception of [Rh(EMAB)2]+. These findings show that the aforementioned species are good electron donors to PCBM. The open circuit voltage, V OC, of the compounds ranged between 0.705 × 10-19 V and 6.617 × 10-19 V, values that are good enough for practical usage in OSC applications. The UV-visible absorption spectra revealed absorption maxima well below 900 nm in all compounds, vital in the efficient functioning of solar cells. In general, this study has shown that platinoid complexation of EMAB can successfully modify both its OLED and OSC properties, making them better precursors in the electronic industry.

4,9- and 4,10-Substituted pyrenes: synthesis, successful isolation, and optoelectronic properties

We report herein a way to prepare and purify optoelectronic functional 4,9- and 4,10-substituted pyrene isomers. By tuning the size of substituents, the designed 4,9- and 4,10-isomers can be successfully isolated by recycling preparative size-exclusion chromatography (SEC) and/or repeated recrystallization. The structure and purity of the isolated compounds 1-5 have been confirmed by 1H NMR, 13C NMR, and HRMS. The photophysical and electrochemical properties of compounds 1-5 have been studied in detail both experimentally and theoretically. The lowest transitions of these pyrenes, 1-5, are allowed, with moderate to high fluorescence quantum yields and radiative decay rates around 108 s-1. The differences between the electrochemical and photophysical properties of 4,9-, 4,10-, 1,6-, and 2,7-substituted isomers are compared and concluded.

Organic Photothermal Cocrystals: Rational Design, Controlled Synthesis, and Advanced Application

Organic photothermal cocrystals, integrating the advantages of intrinsic organic cocrystals and the fascinating photothermal conversion ability, hold attracted considerable interest in both basic science and practical applications, involving photoacoustic imaging, seawater desalination, and photothermal therapy, and so on. However, these organic photothermal cocrystals currently suffer individual cases discovered step by step, as well as the deep and systemic investigation in the corresponding photothermal conversion mechanisms is rarely carried out, suggesting a huge challenge for their further developments. Therefore, it is urgently necessary to investigate and explore the rational design and synthesis of high-performance organic photothermal cocrystals for future applications. This review first and systematically summarizes the organic photothermal cocrystal in terms of molecular classification, the photothermal conversion mechanism, and their corresponding applications. The timely interpretation of the cocrystal photothermal effect will provide broad prospects for the purposeful fabrication of excellent organic photothermal cocrystals toward great efficiency, low cost, and multifunctionality.

Boosting Near-Infrared Photothermal Conversion by Intermolecular Interactions in Isomeric Cocrystals

Organic cocrystal exhibits excellent photothermal conversion (PTC), but how the intermolecular interactions of cocrystals regulate the PTC is obscure. Here, two isomeric donor molecules (phenanthrene and anthracene) and two electron-withdrawing molecules (7,7,8,8,8-tetracyanodimethylquinone and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinone dimethane) are self-assembled into the four cocrystals (PTQ, PFQ, ATQ, and AFQ). By changing the molecular configuration of the donor and the electron-withdrawing ability of the acceptor, the intrinsic influencing factors of the intermolecular interaction on the PTC were explored. Under near-infrared laser (808 nm) irradiation, the PTC efficiencies of PTQ, PFQ, AFQ, and ATQ are 35.85, 44.74, 57.00, and 60.53%, respectively. Based on the single-crystal X-ray diffraction, ultrafast time-resolved transient absorption, and excited-state theoretical calculations, we found that the π-π stacking in ATQ and AFQ is conducive to promoting the near-infrared light-harvesting ability and the p-π interaction of cocrystals can regulate the nonradiative rotation of -C(C≡N)₂ groups, resulting in a tunable near-infrared PTC via the isomeric cocrystals. Accordingly, the evaporation rate of the porous polyurethane-AFQ foam can reach 1.33 kg·m^-2·h^-1 in the simulated solar-driven water evaporation system. This work provides a strategy to boost the PTC by the intermolecular interactions of cocrystal materials.

Structure-controlled intramolecular charge transfer in asymmetric pyrene-based luminogens: synthesis, characterization and optical properties

Four asymmetric D–A type pyrene-based luminogens with tunable optical properties were synthesized, which provide an efficient strategy to achieve pyrene-based full-color photoelectric materials.

Making Nitronaphthalene Fluoresce

Nitroaromatic compounds are inherently nonfluorescent, and the subpicosecond lifetimes of the singlet excited states of many small nitrated polycyclic aromatic hydrocarbons, such as nitronaphthalenes, render them unfeasible for photosensitizers and photo-oxidants, despite their immensely beneficial reduction potentials. This article reports up to a 7000-fold increase in the singlet-excited-state lifetime of 1-nitronaphthalene upon attaching an amine or an N-amide to the ring lacking the nitro group. Varying the charge-transfer (CT) character of the excited states and the medium polarity balances the decay rates along the radiative and the two nonradiative pathways and can make these nitronaphthalene derivatives fluoresce. The strong electron-donating amine suppresses intersystem crossing (ISC) but accommodates CT pathways of nonradiate deactivation. Conversely, the N-amide does not induce a pronounced CT character but slows down ISC enough to achieve relatively long lifetimes of the singlet excited state. These paradigms are key for the pursuit of electron-deficient (n-type) organic conjugates with promising optical characteristics.

Distortion-Controlled Redshift of Organic Dye Molecules

It is shown, quantum chemically, how structural distortion of an aromatic dye molecule can be leveraged to rationally tune its optoelectronic properties. By using a quantitative Kohn-Sham molecular orbital (KS-MO) approach, in combination with time-dependent DFT (TD-DFT), the influence of various structural and electronic tuning parameters on the HOMO-LUMO gap of a benzenoid model dye have been investigated. These parameters include 1) out-of-plane bending of the aromatic core, 2) bending of the bridge with respect to the core, 3) the nature of the bridge itself, and 4) π-π stacking. The study reveals the coupling of multiple structural distortions as a function of bridge length and number of bridges in benzene to be chiefly responsible for a decreased HOMO-LUMO gap, and consequently, red-shifting of the absorption wavelength associated with the lowest singlet excitation (λ≈560 nm) in the model cyclophane systems. These physical insights together with a rational approach for tuning the oscillator strength were leveraged for the proof-of-concept design of an intense near-infrared (NIR) absorbing cyclophane dye at λ=785 nm. This design may contribute to a new class of distortion-controlled NIR absorbing organic dye molecules.

Synthesis, Photophysical and Electronic Properties of New Red-to-NIR Emitting Donor-Acceptor Pyrene Derivatives

We synthesized new pyrene derivatives with strong bis(para-methoxyphenyl)amine donors at the 2,7-positions and n-azaacene acceptors at the K-region of pyrene. The compounds possess a strong intramolecular charge transfer, leading to unusual properties such as emission in the red to NIR region (700 nm), which has not been reported before for monomeric pyrenes. Detailed photophysical studies reveal very long intrinsic lifetimes of >100 ns for the new compounds, which is typical for 2,7-substituted pyrenes but not for K-region substituted pyrenes. The incorporation of strong donors and acceptors leads to very low reduction and oxidation potentials, and spectroelectrochemical studies show that the compounds are on the borderline between localized Robin-Day class-II and delocalized Robin-Day class-III species.

Exploiting a multicomponent domino reaction strategy for the tailoring of versatile environmentally sensitive fluorophore-based nicotinonitriles incorporating pyrene and fluorene moieties

A simplistic and highly effective protocol for the synthesis of a new class of poly-functionalized innovative nicotinonitriles incorporating pyrene and/or fluorene moieties has been developed through the domino four-component condensation reaction of 1-(pyren-1-yl)ethanone/1-(9H-fluoren-2-yl)ethanone, numerous aromatic aldehydes, and 3-oxo-3-(pyren-1-yl)propanenitrile/3-(9H-fluoren-2-yl)-3-oxopropanenitrile and ammonium acetate in acetic acid as a reaction medium. The advantages of this approach are the short reaction time, excellent yield, and the easy experimental workup that affords substrate diversity and operative competence under metal-free reaction conditions for the formation of C–C and C–N bonds. The substituent effects on the photophysical property-based absorption and the emission of the synthesized compounds in dichloromethane have been well-investigated. Strong absorption quenching of around 100 nm was observed when substitution of the benzene ring at the C₄-position of the pyridine moiety occurred with an electron-donating (–N(CH₃)₂) group. All of the newly synthesized nicotinonitrile derivatives showed strong blue-green fluorescence emission with maxima in the range between 420–630 nm. These highly pronounced emission spectra will help this family of compounds to find application in many areas and the field of materials science.

A simplistic and highly effective protocol for the synthesis of a new class of poly-functionalized innovative nicotinonitriles incorporating pyrene and/or fluorene moieties has been developed through the domino four-component condensation reaction.

Rational design of near-infrared absorbing organic dyes: Controlling the HOMO-LUMO gap using quantitative molecular orbital theory

Principles are presented for the design of functional near-infrared (NIR) organic dye molecules composed of simple donor (D), spacer (π), and acceptor (A) building blocks in a D-π-A fashion. Quantitative Kohn-Sham molecular orbital analysis enables accurate fine-tuning of the electronic properties of the π-conjugated aromatic cores by effecting their size, including silaaromatics, adding donor and acceptor substituents, and manipulating the D-π-A torsional angle. The trends in HOMO-LUMO gaps of the model dyes correlate with the excitation energies computed with time-dependent density functional theory at CAMY-B3LYP. Design principles could be developed from these analyses, which led to a proof-of-concept linear D-π-A with a strong excited-state intramolecular charge transfer and a NIR absorption at 879 nm. © 2018 The Authors. Journal of Computational Chemistry published by Wiley Periodicals, Inc.

Fine Tuning of Pyrene Excimer Fluorescence in Molecular Beacons by Alteration of the Monomer Structure

Oligonucleotide probes labeled with pyrene pairs that form excimers have a number of applications in hybridization analysis of nucleic acids. A long excited state lifetime, large Stokes shift, and chemical stability make pyrene excimer an attractive fluorescent label. Here we report synthesis of chiral phosphoramidite building blocks based on (R)-4-amino-2,2-dimethylbutane-1,3-diol, easily available from an inexpensive d-(-)-pantolactone. 1-Pyreneacetamide, 1-pyrenecarboxamide, and DABCYL derivatives have been used in preparation of molecular beacon (MB) probes labeled with one or two pyrenes/quenchers. We observed significant difference in the excimer emission maxima (475-510 nm; Stokes shifts 125-160 nm or 7520-8960 cm^-1) and excimer/monomer ratio (from 0.5 to 5.9) in fluorescence spectra depending on the structure and position of monomers in the pyrene pair. The pyrene excimer formed by two rigid 1-pyrenecarboxamide residues showed the brightest emission. This is consistent with molecular dynamics data on excimer stability. Increase of the excimer fluorescence for MBs after hybridization with DNA was up to 24-fold.

Pyrene Molecular Orbital Shuffle-Controlling Excited State and Redox Properties by Changing the Nature of the Frontier Orbitals

We show that by judicious choice of substituents at the 2- and 7-positions of pyrene, the frontier orbital order of pyrene can be modified, giving enhanced control over the nature and properties of the photoexcited states and the redox potentials. Specifically, we introduced a julolidine-like moiety and Bmes₂ (mes=2,4,6-Me₃ C₆ H₂ ) as very strong donor (D) and acceptor (A), respectively, giving 2,7-D-π-D- and unsymmetric 2,7-D-π-A-pyrene derivatives, in which the donor destabilizes the HOMO-1 and the acceptor stabilizes the LUMO+1 of the pyrene core. Consequently, for 2,7-substituted pyrene derivatives, unusual properties are obtained. For example, very large bathochromic shifts were observed for all of our compounds, and unprecedented green light emission occurs for the D/D system. In addition, very high radiative rate constants in solution and in the solid state were recorded for the D-π-D- and D-π-A-substituted compounds. All compounds show reversible one-electron oxidations, and Jul₂ Pyr exhibits a second oxidation, with the largest potential splitting (ΔE=440 mV) thus far reported for 2,7-substituted pyrenes. Spectroelectrochemical measurements confirm an unexpectedly strong coupling between the 2,7-substituents in our pyrene derivatives.

Synthesis, regioselective aerobic Pd(ii)-catalyzed C–H bond alkenylation and the photophysical properties of pyrenylphenylpyrazoles

Pd(ii)-catalyzed C–H alkenylation of a pyrenylphenylpyrazole afforded fluorophore exhibiting solvent-dependent dual emission, resulting from locally-excited (LE) and intramolecular charge transfer (ICT) excited states.

Aerobic palladium(II)-catalyzed dehydrogenative heck reaction in the synthesis of pyrenyl fluorophores. a photophysical study of β-pyrenyl acrylates in solution and in the solid state

An aerobic dehydrogenative Heck reaction of pyrene (1a) and 2,7-di-tert-butylpyrene (1b) with ethyl acrylate is reported. The reaction is catalyzed by a Pd(OAc)2/4,5-diazafluoren-9-one (DAF) system and takes place in acetic or pivalic acid as solvents at 110-130 °C. The reaction of 1a afforded a 6:1 mixture of C-1- and C-4-alkenylated pyrenes (2a and 3a, respectively) in 71% yield. In the case of 1b, only a C-4-substituted product (3b) was formed in 46% yield. Compounds 2a and 3a,b exhibited fluorescence in solution and in the solid state. In chloroform and THF solution the fluorescence maxima were in the range of 440-465 nm, and quantum yields decreased in the order 2a > 3a> 3b. In the solid state, 3a,b showed blue-green fluorescence (ΦF = 0.26 and 0.14, respectively), whereas 2a emitted yellow-green fluorescence) (ΦF = 0.35). Besides blue-emitting monomers, the presence of green-emitting aggregated species (preformed dimers) in the crystals of 3a,b and red-emitting dynamic excimers in the crystals of 2a has been demonstrated. Single-crystal X-ray diffraction analyses of 2a and 3b confirmed π-stacking of pyrenyl moieties in the crystals of the former and the absence of stacking in the crystals of the latter compound.

Efficient synthesis of pyrene-1-carbothioamides and carboxamides. Tunable solid-state fluorescence of pyrene-1-carboxamides

This paper discloses efficient synthesis of pyrene-1-carbothioamides and carboxamides via Friedel–Crafts reaction of pyrene with isocyanates followed by oxidative desulfuration. The amides display solid-state fluorescence with quantum yields up to 62%, originating from monomers, aggregates or excimers.

A new class of pyrenyl solid-state emitters: 1-pyrenyl ynones. Synthesis via the Friedel–Crafts route, molecular and electronic structure and photophysical properties

Friedel-Crafts acylation of pyrene with alkynoic acids in the presence of trifluoroacetic anhydride and triflic acid constitutes a direct and efficient route to 1-pyrenyl ynones fluorescent in solution and in the solid state.

Tuning light absorption in pyrene: synthesis and substitution effects of regioisomeric donor-acceptor chromophores

Three isomeric donor-acceptor (DA) chromophores based on pyrene were synthesized to study the effects of substitution pattern on intramolecular charge-transfer absorption through pyrene. These chromophores are nonfluorescent and absorb light in the long-wavelength region approaching 700 nm, making them promising light-harvesters. Their optical properties depend greatly on the substitution pattern of the donor, but their electrochemical properties are relatively unaffected.

Nanoscale insight into the exfoliation mechanism of graphene with organic dyes: effect of charge, dipole and molecular structure

We study the mechanism of surface adsorption of organic dyes on graphene, and successive exfoliation in water of these dye-functionalized graphene sheets. A systematic, comparative study is performed on pyrenes functionalized with an increasing number of sulfonic groups. By combining experimental and modeling investigations, we find an unambiguous correlation between the graphene-dye interaction energy, the molecular structure and the amount of graphene flakes solubilized. The results obtained indicate that the molecular dipole is not important per se, but because it facilitates adsorption on graphene by a "sliding" mechanism of the molecule into the solvent layer, facilitating the lateral displacement of the water molecules collocated between the aromatic cores of the dye and graphene. While a large dipole and molecular asymmetry promote the adsorption of the molecule on graphene, the stability and pH response of the suspensions obtained depend on colloidal stabilization, with no significant influence of molecular charging and dipole.

Fabrication of a Poly(3-octylthiophene-2,5-diyl) Electrochemiluminescence Device Assisted by Perylene

In this study, we report the light-emitting assistance effect of perylene on a polymer electrochemiluminescence (ECL) device using poly(3-octylthiophene-2,5-diyl) (P3OT). An ECL device is a liquid type self-luminous device with a simple structure, and can be fabricated by a relatively easy procedure. Significant improvement in luminescence properties was confirmed when 1.0 wt % perylene was added to the ECL device using 3.0 wt % P3OT. Improvements of about 12 times of the maximum luminescence intensity and about 23 times of the light-emitting time ratio compared with that of a P3OT ECL device were obtained. We conclude that the light-emitting assistance of perylene is achieved by perylene radical ions shuttling electrons to P3OT while they are moving around in the emitting solution. The light-emitting assistance effect of perylene was also confirmed when poly(3-dodecylthiophene-2,5-diyl), which has almost identical electrochemical and photophysical characteristics to those of P3OT, was used instead of P3OT.