Self-Assembled Nanostructures of Oligopyridine Molecules

Dihedral Angles and Photoluminescence Quantum Yields: An NMR Analysis

The synthesis of two different series of donor-acceptor (D-A) molecules is reported, consisting of a series of four structurally related donors and two different acceptors. The subtle differences in the electron density of these D-A-D and D-A compounds are clearly reflected in the different chemical shifts of certain donor protons in the 1H NMR spectra. These shifts show a cosine squared correlation of the dihedral angle between the donor units and the neighbouring phenyl unit of the acceptor. This correlation is also related to optical properties such as the photoluminescence quantum yield, which shows a similar trend due to the different degree of charge transfer during excitation and relaxation processes. In this way, it is possible to directly correlate a molecular structural parameter with a material property on a purely experimental basis, which should be applicable to many donor-acceptor systems.

Revealing the Origin of Fast Delayed Fluorescence in a Donor Functionalized Bisterpyridine

A new carbazole-substituted bisterpyridine with pronounced delayed fluorescence is presented. While the molecular donor-acceptor-donor design suggests the origin of this to be thermally activated delayed fluorescence (TADF), results from various photophysical characterizations, OLED characteristics, temperature-dependent NMR spectroscopy, and DFT calculations all point against the involvement of triplet states. The molecule exhibits blue emission at about 440 nm with two or more fast decay channels in the lower nanosecond range in both solution and thin films. The delayed emission is proposed to be caused by rotational vibrational modes. We suggest that these results are generally applicable, especially for more complex molecules, and should be considered as alternative or competitive emissive relaxation pathways in the field of organic light emitting materials.

Static Scanning Tunneling Microscopy Images Reveal the Mechanism of Supramolecular Polymerization of an Oligopyridine on Graphite

Supramolecular polymerization of a donor-acceptor bisterpyridine (BTP) equipped with an electron-rich carbazole unit is observed by scanning tunneling microscopy (STM) at the highly oriented pyrolytic graphite (HOPG)|solution interface. It is shown that two-dimensional crystals of supramolecular (co)polymers are formed by chain growth polymerization, which in turn can be described by copolymerization statistics. From concentration-dependent measurements, derived copolymerization parameters and DFT calculations, a mechanism for self-assembly is developed that suggests a kinetically driven polymerization process in combination with thermodynamically controlled crystallization.

Control of Molecular Orientation in Organic Semiconductor Films using Weak Hydrogen Bonds

Use of the intrinsic optoelectronic functions of organic semiconductor films has not yet reached its full potential, mainly because of the primitive methodology used to control the molecular aggregation state in amorphous films during vapor deposition. Here, a universal molecular engineering methodology is presented to control molecular orientation; this methodology strategically uses noncovalent, intermolecular weak hydrogen bonds in a series of oligopyridine derivatives. A key is to use two bipyridin-3-ylphenyl moieties, which form self-complementary intermolecular weak hydrogen bonds, and which do not induce unfavorable crystallization. Another key is to incorporate a planar anisotropic molecular shape by reducing the steric hindrance of the core structure for inducing π-π interactions. These synergetic effects enhance horizontal orientation in amorphous organic semiconductor films and significantly increasing electron mobility. Through this evaluation process, an oligopyridine derivative is selected as an electron-transporter, and successfully develops highly efficient and stable deep-red organic light-emitting devices as a proof-of-concept.

Cyanophenyl vs. pyridine substituent: impact on the adlayer structure and formation on HOPG and Au(111)

A new cyano substituted bis(terpyridine) derivative CN-BTP was synthesized and its adsorption on highly oriented pyrolytic graphite (HOPG) and Au(111) was investigated. CN-BTP is closely related to the previously investigated 2,4'-BTP, where the cyanophenyl groups are replaced by pyridine moieties. The scanning tunneling microscopy (STM) investigation of CN-BTP at the liquid|HOPG interface shows a highly ordered herringbone structure that is stabilized by double weak intermolecular C-HN hydrogen bonds, partially through the -CN substituents, which is different from the most stable square structure of 2,4'-BTP. The adsorption processes were investigated using cyclic voltammetry (CV) on Au(111) in a neutral phosphate buffer. A fast and full adlayer formation could be observed with CN-BTP, whereas an extremely slow process with 2,4'-BTP under the same conditions was found. Our data show that the CN substituents on BTP not only change the structure of the monolayer at the liquid|HOPG interface, but also accelerate the phase transition process in the electrolyte dramatically. This could be explained by the adlayer-substrate interactions, which is supported by DFT calculations. Our findings might be extended more generally to further pyridine comprising self-assembling molecules to fine-tune the adlayer structure and phase transition/adsorption kinetics by replacing pyridine by cyanophenyl moieties.

One-dimension-based spatially ordered architectures for solar energy conversion

The current status, future developments, and challenges of one-dimension-based spatially ordered architectures in solar energy conversion are discussed and elucidated.

Influence of the solvent on the stability of bis(terpyridine) structures on graphite

The effect of solvation on the adsorption of organic molecules on graphite at room temperature has been addressed with force-field molecular dynamics simulations. As a model system, the solvation of a bis(terpyridine) isomer in water and 1,2,4-trichlorobenzene was studied with an explicit solvation model. The inclusion of solvation has a noticeable effect on adsorption energies. Although the results of the various considered force fields differ quite significantly, they all agree that the adsorption of BTP from the TCB solvent is almost thermoneutral. The substrate simply acts as a template to allow a planar arrangement of the network, which is stabilized by the intermolecular interaction. Using an atomic thermodynamics approach, the order of the stability of various network structures as a function of the chemical potential is derived yielding a sequence in agreement with the experiment.

Self-templating 2D supramolecular networks: a new avenue to reach control over a bilayer formation

One of the greatest challenges in 2D self-assembly at interfaces is the ability to grow spatially controlled supramolecular motifs in the third dimension, exploiting the surface as a template. In this manuscript a concentration-dependent study by scanning tunneling microscopy at the solid-liquid interface, corroborated by Molecular Dynamics (MD) simulations, reveals the controlled generation of mono- or bilayer self-assembled Kagomé networks based on a fully planar tetracarboxylic acid derivative. By programming the backbone of the molecular building blocks, we present a strategy to gain spatial control over the adlayer structure by conferring self-templating capacity to the 2D self-assembled network.

Septipyridines as conformationally controlled substitutes for inaccessible bis(terpyridine)-derived oligopyridines in two-dimensional self-assembly

The position of the peripheral nitrogen atoms in bis(terpyridine)-derived oligopyridines (BTPs) has a strong impact on their self-assembly behavior at the liquid/HOPG (highly oriented pyrolytic graphite) interface. The intermolecular hydrogen bonding interactions in these peripheral pyridine units show specific 2D structures for each BTP isomer. From nine possible constitutional isomers only four have been described in the literature. The synthesis and self-assembling behavior of an additional isomer is presented here, but the remaining four members of the series are synthetically inaccessible. The self-assembling properties of three of the missing four BTP isomers can be mimicked by making use of the energetically preferred N-C-C-N transoid conformation between 2,2'-bipyridine subunits in a new class of so-called septipyridines. The structures are investigated by scanning tunneling microscopy (STM) and a combination of force-field and first-principles electronic structure calculations.

Constructing metal-based structures on nanopatterned etched silicon

Silicon surfaces with nanoscale etched patterns were obtained using polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) block copolymer films as templates, followed by brief immersion in HF(aq). The resulting interfaces were comprised of pseudohexagonal arrays of pits on the silicon, whose shapes depended upon the chosen silicon orientation. The top unetched face of silicon remains capped by the native oxide, and the pit interiors are terminated by Si-H(x). Selective chemical functionalization via these two chemical handles was demonstrated to be a viable approach toward building nanostructured metal oxide and metal features within these silicon pits and on the top face. Using a series of interfacial chemical reactions, including oxidation (of Si-H(x)-terminated regions), hydrosilylation, and alkoxysilane-based chemistry on silicon oxide, the growth of metal-based structures can be spatially controlled. In the first approach, titania nanobowls were grown within the etch pits, and in the second, galvanic displacement was used to produce gold nanoparticles either within the etch pits, on the top silicon face, or both.

Atomic-Resolution Kinked Structure of an Alkylporphyrin on Highly Ordered Pyrolytic Graphite

The atomic structure of the chains of an alkyl porphyrin (5,10,15,20-tetranonadecylporphyrin) self-assembled monolayer (SAM) at the solid/liquid interface of highly ordered pyrolytic graphite (HOPG) and 1-phenyloctane is resolved using calibrated scanning tunneling microscopy (STM), density functional theory (DFT) image simulations, and ONIOM-based geometry optimizations. While atomic structures are often readily determined for porphyrin SAMs, the determination of the structure of alkyl-chain connections has not previously been possible. A graphical calibration procedure is introduced, allowing accurate observation of SAM lattice parameters, and, of the many possible atomic structures modeled, only the lowest-energy structure obtained was found to predict the observed lattice parameters and image topography. Hydrogen atoms are shown to provide the conduit for the tunneling current through the alkyl chains.

Two-dimensional structures of anthracene derivatives: photodimerization and host-guest chemistry

By using a simple anthracene derivative with four alkoxy tails, a two-dimensional patterned surface was fabricated. The two-dimensional structures were directly visualized by scanning tunneling microscopy (STM) at the solid/liquid interface. The anthracene derivative formed highly ordered structures displaying cavities into which solvent molecules of 1-phenyloctane were coadsorbed. The functionality of the patterned surface was demonstrated by activating host-guest chemistry as the solvent molecules could be replaced by coronene, whose size is almost identical to the cavities formed by the anthracene derivative. Furthermore, [4 + 4] photodimerization of the anthracene derivative was performed at the solid/liquid interface and revealed that the physical height and electron density of the states were changed, resulting in the increase of an apparent height in the STM images. We demonstrate thus that the porous network of the two-dimensional pattern created by the anthracene derivative can be applied for selectively incorporating guest molecules and for photoprocessing.

Bis(terpyridine)-based surface template structures on graphite: a force field and DFT study

Host-guest networks formed by ordered organic layers are promising candidates for applications in molecular storage and quantum computing. We have studied 2-dimensionally ordered surface template structures of bis(terpyridine)-derived molecules (BTPs) on graphite using force field and DFT methods and compared the results to recent experimental observations. In order to determine the force field best suited for surface calculations, bond lengths and angles, torsional potentials, adsorption and stacking energies of smaller aromatic molecules were calculated with different force fields (Compass, UFF, Dreiding and CVFF). Density functional perturbation theory calculations were used to study the intermolecular interactions between 3,3'-BTP molecules. Structural properties, adsorption energies and rotational barriers of the 3,3'-BTP surface structure and its host-guest systems with phthalocyanine (PcH(2)) or excess 3,3'-BTP as guest molecules have been addressed. In addition, STM images of oligopyridine and phthalocyanine molecules were simulated based on periodic and local density functional theory calculations.