Orientation determination of protein helical secondary structures using linear and nonlinear vibrational spectroscopy

Probing Interfacial Aging of Model Adhesion Joints under a Hygrothermal Environment at a Molecular Level

Generally, for adhesive joints, the polar water molecules in humid environments can have a critical effect on the interfacial structures and structural evolution adjacent to the solid substrates. Regarding this, it is still a big challenge to detect and understand the interfacial hygrothermal aging process at the molecular level in real time and in situ. In this study, to trace the interfacial hygrothermal aging process of a classical epoxy formula containing diglycidyl ether of biphenyl A (DGEBA) and 2,2'-(ethylenedioxy) diethylamine (EDDA) with sapphire and fused silica in a typical hygrothermal environment (85 °C and 85% RH), sum frequency generation (SFG) vibrational spectroscopy was used to probe the molecular-level interfacial structural change over the time. The structural evolution dynamics at the buried epoxy/sapphire and epoxy/silica interfaces upon hygrothermal aging were revealed directly in situ. The interfacial delamination during hygrothermal aging was also elucidated from the molecular level. Upon hygrothermal aging, the interfacial CH signals, such as the ones from methyl, methylene, and phenyl groups, decreased significantly and the water OH signals increased substantially, indicating the water molecules had diffused into the interfaces and destroyed the original interactions between the epoxy formula and the substrates. Further analysis indicates that when the integrated signals in the CH range declined to their minimum and leveled off, the interfacial delamination happened. The tensile experiment proved the validity of these spectroscopic experimental results. Our study provides first-hand and molecular-level evidence on a direct correlation between the diffusion of the surrounding water molecules into the interface and the evolution/destruction of the interfacial structures during hygrothermal aging. More importantly, it is proved, SFG can be developed into a powerful tool to noninvasively reveal the local interfacial delamination in real time and in situ under extreme hygrothermal conditions, complemented by the mechanic test.

The Functionality of Membrane-Inserting Proteins and Peptides: Curvature Sensing, Generation, and Pore Formation

Proteins and peptides with hydrophobic and amphiphilic segments are responsible for many biological functions. The sensing and generation of membrane curvature are the functions of several protein domains or motifs. While some specific membrane proteins play an essential role in controlling the curvature of distinct intracellular membranes, others participate in various cellular processes such as clathrin-mediated endocytosis, where several proteins sort themselves at the neck of the membrane bud. A few membrane-inserting proteins form nanopores that permeate selective ions and water to cross the membrane. In addition, many natural and synthetic small peptides and protein toxins disrupt the membrane by inducing nonspecific pores in the membrane. The pore formation causes cell death through the uncontrolled exchange between interior and exterior cellular contents. In this article, we discuss the insertion depth and orientation of protein/peptide helices, and their role as a sensor and inducer of membrane curvature as well as a pore former in the membrane. We anticipate that this extensive review will assist biophysicists to gain insight into curvature sensing, generation, and pore formation by membrane insertion.

Peptide Orientation Strongly Affected by the Nanoparticle Size as Revealed by Sum Frequency Scattering Spectroscopy

The orientation of proteins at interfaces has a profound effect on the function of proteins. For nanoparticles (NPs) in a biological environment, protein orientation determines the toxicity, function, and identity of the NP. Thus, understanding how proteins orientate at NP surfaces is a critical parameter in controlling NP biochemistry. While planar surfaces are often used to model NP interfaces for protein orientation studies, it has been shown recently that proteins can orient very differently on NP surfaces. This study uses sum frequency scattering vibrational spectroscopy of the model helical leucine-lysine (LK) peptide on NPs of different sizes to determine the cause for the orientation effects. The data show that, for low dielectric constant materials, the orientation of the helical LK peptide is a function of the coulombic forces between peptides across different particle volumes. This finding strongly suggests that flat model systems are only of limited use for determining protein orientation at NP interfaces and that charge interactions should be considered when designing medical NPs or assessing NP biocompatibility.

Conformation and Orientation of Antimicrobial Peptides MSI-594 and MSI-594A in a Lipid Membrane

There is significant interest in the development of antimicrobial compounds to overcome the increasing bacterial resistance to conventional antibiotics. Studies have shown that naturally occurring and de novo-designed antimicrobial peptides could be promising candidates. MSI-594 is a synthetic linear, cationic peptide that has been reported to exhibit a broad spectrum of antimicrobial activities. Investigation into how MSI-594 disrupts the cell membrane is important for better understanding the details of this antimicrobial peptide (AMP)'s action against bacterial cells. In this study, we used two different synthetic lipid bilayers: zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and anionic 7:3 POPC/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho(1'-rac-glycerol) (POPG). Sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) were used to determine the orientations of MSI-594 and its analogue MSI-594A associated with zwitterionic POPC and anionic 7:3 POPC/POPG lipid bilayers. The simulated ATR-FTIR and SFG spectra using nuclear magnetic resonance (NMR)-determined structures were compared with experimental spectra to optimize the bent angle between the N- (1-11) and C- (12-24) termini helices and the membrane orientations of the helices; since the NMR structure of the peptide was determined from lipopolysaccharide (LPS) micelles, the optimization was needed to find the most suitable conformation and orientation in lipid bilayers. The reported experimental results indicate that the optimized MSI-594 helical hairpin structure adopts a complete lipid bilayer surface-bound orientation (denoted "face-on") in both POPC and 7:3 POPC/POPG lipid bilayers. The analogue peptide, MSI-584A, on the other hand, exhibited a larger bent angle between the N- (1-11) and C- (12-24) termini helices with the hydrophobic C-terminal helix inserted into the hydrophobic region of the bilayer (denoted "membrane-inserted") when interacting with both POPC and 7:3 POPC/POPG lipid bilayers. These experimental findings on the membrane orientations suggest that both peptides are likely to disrupt the cell membrane through the carpet mechanism.

Monitoring the Molecular Structure of Fibrinogen during the Adsorption Process at the Buried Silicone Oil Interface In Situ in Real Time

Interfacial proteins play important roles in many research fields and applications, such as biosensors, biomedical implants, nonfouling coatings, etc. Directly probing interfacial protein behavior at buried solid/liquid and liquid/liquid interfaces is challenging. We used sum frequency generation vibrational spectroscopy and a Hamiltonian data analysis method to monitor the molecular structure of fibrinogen on silicone oil during the adsorption process in situ in real time. The results showed that the adsorbed fibrinogen molecules tend to adopt a bent structure throughout the entire adsorption process with the same orientation. This is different from the case of adsorbed fibrinogen on CaF₂ with a linear structure or on polystyrene with a bent structure but a different orientation. The method introduced herein is generally applicable for following time-dependent molecular structures of many other proteins and peptides at interfaces in situ in real time at the molecular level.

Determination of protein conformation and orientation at buried solid/liquid interfaces

Protein structures at solid/liquid interfaces mediate interfacial protein functions, which are important for many applications. It is difficult to probe interfacial protein structures at buried solid/liquid interfaces in situ at the molecular level. Here, a systematic methodology to determine protein molecular structures (orientation and conformation) at buried solid/liquid interfaces in situ was successfully developed with a combined approach using a nonlinear optical spectroscopic technique - sum frequency generation (SFG) vibrational spectroscopy, isotope labeling, spectra calculation, and computer simulation. With this approach, molecular structures of protein GB1 and its mutant (with two amino acids mutated) were investigated at the polymer/solution interface. Markedly different orientations and similar (but not identical) conformations of the wild-type protein GB1 and its mutant at the interface were detected, due to the varied molecular interfacial interactions. This systematic strategy is general and can be widely used to elucidate protein structures at buried interfaces in situ.

Orientation of the Dysferlin C2A Domain is Responsive to the Composition of Lipid Membranes

Dysferlin is a 230 kD protein that plays a critical function in the active resealing of micron-sized injuries to the muscle sarcolemma by recruiting vesicles to patch the injured site via vesicle fusion. Muscular dystrophy is observed in humans when mutations disrupt this repair process or dysferlin is absent. While lipid binding by dysferlin's C2A domain (dysC2A) is considered fundamental to the membrane resealing process, the molecular mechanism of this interaction is not fully understood. By applying nonlinear surface-specific vibrational spectroscopy, we have successfully demonstrated that dysferlin's N-terminal C2A domain (dysC2A) alters its binding orientation in response to a membrane's lipid composition. These experiments reveal that dysC2A utilizes a generic electrostatic binding interaction to bind to most anionic lipid surfaces, inserting its calcium binding loops into the lipid surface while orienting its β-sheets 30-40° from surface normal. However, at lipid surfaces, where PI(4,5)P2 is present, dysC2A tilts its β-sheets more than 60° from surface normal to expose a polybasic face, while it binds to the PI(4,5)P2 surface. Both lipid binding mechanisms are shown to occur alongside dysC2A-induced lipid clustering. These different binding mechanisms suggest that dysC2A could provide a molecular cue to the larger dysferlin protein as to signal whether it is bound to the sarcolemma or another lipid surface.

Peptide Orientation at Emulsion Nanointerfaces Dramatically Different from Flat Surfaces

The adsorption of protein to nanoparticles plays an important role in toxicity, food science, pharmaceutics, and biomaterial science. Understanding how proteins bind to nanophase surfaces is instrumental for understanding and, ultimately, controlling nanoparticle (NP) biochemistry. Techniques probing the adsorption of proteins at NP interfaces exist; however, these methods have been unable to determine the orientation and folding of proteins at these interfaces. For the first time, we probe in situ with sum frequency scattering vibrational spectroscopy the orientation of model leucine-lysine (LK) peptides adsorbed to NPs. The results show that both α-helical and β-strand LK peptides bind the particles in an upright orientation, in contrast to the flat orientation of LKs binding to planar surfaces. The different binding geometry is explained by Coulombic forces between peptides across the particle volume.

Spectroscopically Detecting Molecular-Level Bonding Formation between an Epoxy Formula and Steel

The formation of the interfacial adhesion between an epoxy adhesive and a substrate was normally accompanied by the epoxy curing process on the substrate. Although the debate on the formation mechanism of the interfacial adhesion is still ongoing, this issue can causally be resolved by studying the interfacial structural formation between the epoxy adhesive and the substrate. Herein, to reveal the interfacial structural formation of a representative formula composed of epoxy (digylcidyl ether of biphenyl A, DGEBA) and amine hardener (2,2'-(ethylenedioxy) diethylamine, EDDA) with the steel substrate upon curing and postcuring treatments, sum-frequency generation (SFG) vibrational spectroscopy with a sandwiched transparent window/epoxy adhesive/steel setup was applied to detect and track the buried molecular-level structures at the epoxy adhesive/steel interface. An X-ray photoelectron spectroscopic (XPS) experiment was performed to probe the intentionally exposed interface to disclose the occurring interfacial chemical reaction. The reaction between the epoxy groups and the steel-surface OH groups and the molecular reconstruction of interfacial epoxy methyl groups upon curing and postcuring steps were confirmed. The latter also indirectly indicated the formation of the additional hydrogen bonding and the former bonding reaction at the interface. The above two spectroscopic experimental results matched up with the further examination of the adhesion strength. Therefore, this work elucidates the formation of the interfacial bonding between the epoxy formula and the steel substrate upon curing and postcuring treatments at the molecular level, thus providing an in-depth insight into the origin of the interfacial adhesion.

Molecular-Level Correlation between Spectral Evidence and Interfacial Bonding Formation for Epoxy Adhesives on Solid Substrates

Interfacial bonding strength of an epoxy-based adhesive depends on the interfacial interaction between the adhesive and the substrate. Normally, the curing process at the interface accompanied by the interfacial bonding formation is different from that in the bulk, and it is still a big challenge to probe the interfacial bonding formation at a molecular level. In this study, to trace the interfacial structural evolution of a representative formula of epoxy (digylcidyl ether of biphenyl A, DGEBA) and amine hardener [1,2-bis(2-aminoethoxy)ethane, EDDA] with the sapphire and silica substrates upon curing and post-curing steps, sum frequency generation (SFG) vibrational spectroscopy is employed to detect the molecular-level interfacial structural information. For the sapphire substrate, upon curing, backbone methylene (CH₂) stretching signals decrease, indicating the formation of a rigid chain network structure and thus losing the local methylene order, while vibrational signals of the sapphire surface hydroxyl (OH) groups (including hydrogen-bonded and unbonded) increase significantly, indicating the formation of a strong hydrogen-bonding and polar interaction between the epoxy adhesive and the sapphire surface. Upon post-curing, increased backbone CH₂ signals and decreased sapphire OH signals suggest interfacial chemical bonding formation due to the reaction between the epoxy rings and the sapphire surface OH groups. Orientation analysis confirms the enhanced ordering of the sapphire surface OH groups upon curing and post-curing, in comparison to the uncured epoxy formula. As for the fused silica, weak vibrational signals of the methylene (CH₂) and methyl (CH₃) groups are observed before curing, while both of them increase slightly for the cured and post-cured epoxy formulae, suggesting relatively less hydrophilic nature of the silica surface compared to that of the sapphire surface, also evidenced by the very weak OH signals upon curing and post-curing. Further measurement on the adhesion strength matches up with the above spectroscopic experimental results, substantiating the correlation between the macroscopic bonding strength of the epoxy adhesive and the microscopic molecular-level structure.

Early sum frequency generation vibrational spectroscopic studies on peptides and proteins at interfaces

This paper summarizes the early research results on studying proteins and peptides at interfaces using sum frequency generation (SFG) vibrational spectroscopy. SFG studies in the C-H stretching frequency region to examine the protein side-chain behavior and in the amide I frequency region to investigate the orientation and conformation of interfacial peptides/proteins are presented. The early chiral SFG research and SFG isotope labeling studies on interfacial peptides/proteins are also discussed. These early SFG studies demonstrate the feasibility of using SFG to elucidate interfacial molecular structures of peptides and proteins in situ, which built a foundation for later SFG investigations on peptides and proteins at interfaces.

Binding affinity and conformation of a conjugated AS1411 aptamer at a cationic lipid bilayer interface

Aptamers have been widely used in the detection, diagnosis, and treatment of cancer. Owing to their special binding affinity toward cancer-related biomarkers, aptamers can be used for targeted drug delivery or bio-sensing/bio-imaging in various scenarios. The interfacial properties of aptamers play important roles in controlling the surface charge, recognition efficiency, and binding affinity of drug-delivering lipid-based carriers. In this research, the interfacial behaviors, such as surface orientation, molecular conformation, and adsorption kinetics of conjugated AS1411 molecules at different cationic lipid bilayer interfaces were investigated by sum frequency generation vibrational spectroscopy (SFG-VS) in situ and in real-time. It is shown that the conjugated AS1411 molecules at the DMTAP bilayer interface show a higher binding affinity but with slower binding kinetics compared to the DMDAP bilayer interface. The analysis results also reveal that the thymine residues of cholesteryl conjugated AS1411 molecules show higher conformational ordering compared to the thymine residues of the alkyl chain conjugated AS1411 molecules. These understandings provide unique molecular insight into the aptamer-lipid membrane interactions, which may help researchers to improve the efficiency and safety of aptamer-related drug delivery systems.

Accurate molecular orientation at interfaces determined by multimode polarization-dependent heterodyne-detected sum-frequency generation spectroscopy via multidimensional orientational distribution function

Many essential processes occur at soft interfaces, from chemical reactions on aqueous aerosols in the atmosphere to biochemical recognition and binding at the surface of cell membranes. The spatial arrangement of molecules specifically at these interfaces is crucial for many of such processes. The accurate determination of the interfacial molecular orientation has been challenging due to the low number of molecules at interfaces and the ambiguity of their orientational distribution. Here, we combine phase- and polarization-resolved sum-frequency generation (SFG) spectroscopy to obtain the molecular orientation at the interface. We extend an exponentially decaying orientational distribution to multiple dimensions, which, in conjunction with multiple SFG datasets obtained from the different vibrational modes, allows us to determine the molecular orientation. We apply this new approach to formic acid molecules at the air–water interface. The inferred orientation of formic acid agrees very well with ab initio molecular dynamics data. The phase-resolved SFG multimode analysis scheme using the multidimensional orientational distribution thus provides a universal approach for obtaining the interfacial molecular orientation.

Probing protein aggregation at buried interfaces: distinguishing between adsorbed protein monomers, dimers, and a monomer-dimer mixture in situ

Protein adsorption on surfaces greatly impacts many applications such as biomedical materials, anti-biofouling coatings, bio-separation membranes, biosensors, antibody protein drugs etc. For example, protein drug adsorption on the widely used lubricant silicone oil surface may induce protein aggregation and thus affect the protein drug efficacy. It is therefore important to investigate the molecular behavior of proteins at the silicone oil/solution interface. Such an interfacial study is challenging because the targeted interface is buried. By using sum frequency generation vibrational spectroscopy (SFG) with Hamiltonian local mode approximation method analysis, we studied protein adsorption at the silicone oil/protein solution interface in situ in real time, using bovine serum albumin (BSA) as a model. The results showed that the interface was mainly covered by BSA dimers. The deduced BSA dimer orientation on the silicone oil surface from the SFG study can be explained by the surface distribution of certain amino acids. To confirm the BSA dimer adsorption, we treated adsorbed BSA dimer molecules with dithiothreitol (DTT) to dissociate these dimers. SFG studies on adsorbed BSA after the DTT treatment indicated that the silicone oil surface is covered by BSA dimers and BSA monomers in an approximate 6 : 4 ratio. That is to say, about 25% of the adsorbed BSA dimers were converted to monomers after the DTT treatment. Extensive research has been reported in the literature to determine adsorbed protein dimer formation using ex situ experiments, e.g., by washing off the adsorbed proteins from the surface then analyzing the washed-off proteins, which may induce substantial errors in the washing process. Dimerization is a crucial initial step for protein aggregation. This research developed a new methodology to investigate protein aggregation at a solid/liquid (or liquid/liquid) interface in situ in real time using BSA dimer as an example, which will greatly impact many research fields and applications involving interfacial biological molecules.

Probing Orientations and Conformations of Peptides and Proteins at Buried Interfaces

Molecular structures of peptides/proteins at interfaces determine their interfacial properties, which play important roles in many applications. It is difficult to probe interfacial peptide/protein structures because of the lack of appropriate tools. Sum frequency generation (SFG) vibrational spectroscopy has been developed into a powerful technique to elucidate molecular structures of peptides/proteins at buried solid/liquid and liquid/liquid interfaces. SFG has been successfully applied to study molecular interactions between model cell membranes and antimicrobial peptides/membrane proteins, surface-immobilized peptides/enzymes, and physically adsorbed peptides/proteins on polymers and 2D materials. A variety of other analytical techniques and computational simulations provide supporting information to SFG studies, leading to more complete understanding of structure-function relationships of interfacial peptides/proteins. With the advance of SFG techniques and data analysis methods, along with newly developed supplemental tools and simulation methodology, SFG research on interfacial peptides/proteins will further impact research in fields like chemistry, biology, biophysics, engineering, and beyond.

Developments and Ongoing Challenges for Analysis of Surface-Bound Proteins

Proteins at surfaces and interfaces play important roles in the function and performance of materials in applications ranging from diagnostic assays to biomedical devices. To improve the performance of these materials, detailed molecular structure (conformation and orientation) along with the identity and concentrations of the surface-bound proteins on those materials must be determined. This article describes radiolabeling, surface plasmon resonance, quartz crystal microbalance with dissipation, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, sum frequency generation spectroscopy, and computational techniques along with the information each technique provides for characterizing protein films. A multitechnique approach using both experimental and computation methods is required for these investigations. Although it is now possible to gain much insight into the structure of surface-bound proteins, it is still not possible to obtain the same level of structural detail about proteins on surfaces as can be obtained about proteins in crystals and solutions, especially for large, complex proteins. However, recent results have shown it is possible to obtain detailed structural information (e.g., backbone and side chain orientation) about small peptides (5-20 amino sequences) on surfaces. Current studies are extending these investigations to small proteins such as protein G B1 (∼6 kDa). Approaches for furthering the capabilities for characterizing the molecular structure of surface-bound proteins are proposed.

Molecular Structure of the Surface-Immobilized Super Uranyl Binding Protein

Recently, a super uranyl binding protein (SUP) was developed, which exhibits excellent sensitivity/selectivity to bind uranyl ions. It can be immobilized onto a surface in sensing devices to detect uranyl ions. Here, sum frequency generation (SFG) vibrational spectroscopy was applied to probe the interfacial structures of surface-immobilized SUP. The collected SFG spectra were compared to the calculated orientation-dependent SUP SFG spectra using a one-excitonic Hamiltonian approach based on the SUP crystal structures to deduce the most likely surface-immobilized SUP orientation(s). Furthermore, discrete molecular dynamics (DMD) simulation was applied to refine the surface-immobilized SUP conformations and orientations. The immobilized SUP structures calculated from DMD simulations confirmed the SUP orientations obtained from SFG data analyzed based on the crystal structures and were then used for a new round of SFG orientation analysis to more accurately determine the interfacial orientations and conformations of immobilized SUP before and after uranyl ion binding, providing an in-depth understanding of molecular interactions between SUP and the surface and the effect of uranyl ion binding on the SUP interfacial structures. We believe that the developed method of combining SFG measurements, DMD simulation, and Hamiltonian data analysis approach is widely applicable to study biomolecules at solid/liquid interfaces.

Direct Evidence That Mutations within Dysferlin's C2A Domain Inhibit Lipid Clustering

Mechanical stress on sarcolemma can create small tears in the muscle cell membrane. Within the sarcolemma resides the multidomain dysferlin protein. Mutations in this protein render it unable to repair the sarcolemma and have been linked to muscular dystrophy. A key step in dysferlin-regulated repair is the binding of the C2A domain to the lipid membrane upon increased intracellular calcium. Mutations mapped to this domain cause loss of binding ability of the C2A domain. There is a crucial need to understand the geometry of dysferlin C2A at a membrane interface as well as cell membrane lipid reorientation when compared to that of a mutant. Here, we describe a comparison between the wild-type dysferlin C2A and a mutation to the conserved aspartic acids in the domain binding loops. To identify both the geometry and the cell membrane lipid reorientation, we applied sum frequency generation (SFG) vibrational spectroscopy and coupled it with simulated SFG spectra to observe and quantify the interaction with a model cell membrane composed of phosphotidylserine and phosphotidylcholine. Observed changes in surface pressure demonstrate that calcium-bridged electrostatic interactions govern the initial interaction of the C2A domains docking with a lipid membrane. SFG spectra taken from the amide-I region for the wild type and variant contain features near 1642, 1663, and 1675 cm^-1 related to the C2A domain β-sandwich secondary structure, indicating that the domain binds in a specific orientation. Mapping simulated SFG spectra to the experimentally collected spectra indicated that both wild-type and variant domains have nearly the same orientation to the membrane surface. However, examining the ordering of the lipids that make up a model membrane using SFG, we find that the wild type clusters the lipids as seen by the increase in the ratio of the CD₃ and CD₂ symmetric intensities by 170% for the wild type and by 120% for the variant. This study highlights the capabilities of SFG to probe with great detail biological mutations in proteins at cell membrane interfaces.

Probing Molecular Interactions between Surface-Immobilized Antimicrobial Peptides and Lipopolysaccharides In Situ

Lipopolysaccharide (LPS) is a component of the outer membrane of Gram-negative bacteria. Recently, a label-free immobilized antimicrobial peptide (AMP) surface plasmon resonance platform was developed to successfully distinguish LPS from multiple bacterial strains. Among the tested AMPs, SMAP29 exhibited excellent affinity with LPS and has two independent LPS-binding sites located at two termini of the peptide. In this study, sum frequency generation vibrational spectroscopy was applied to investigate molecular interactions between three LPS samples and surface-immobilized SMAP29 via the N-terminus, the C-terminus, and a middle site at the solid/liquid interface in situ in real-time, supplemented by circular dichroism spectroscopy. It was found that the conformations and orientations of surface-immobilized SMAP29 via different sites are different when interacting with the same LPS, with different interaction kinetics. The same SMAP29 sample also has different structures and interaction kinetics while interacting with different LPS samples with different charge densities and hydrophobicities. The observed results on molecular interactions between surface-immobilized peptides and LPS can well interpret the different adsorption amounts of various LPSs on different surface-immobilized peptides.

Orientation and Conformation of Proteins at the Air-Water Interface Determined from Integrative Molecular Dynamics Simulations and Sum Frequency Generation Spectroscopy

Understanding the assembly of proteins at the air-water interface (AWI) informs the formation of protein films, emulsion properties, and protein aggregation. Determination of protein conformation and orientation at an interface is difficult to resolve with a single experimental or simulation technique alone. To date, the interfacial structure of even one of the most widely studied proteins, lysozyme, at the AWI remains unresolved. In this study, molecular dynamics (MD) simulations are used to determine if the protein adopts a side-on, head-on, or axial orientation at the AWI with two different forcefields, GROMOS-53a6 + SPC/E and a99SB-disp + TIP4P-D. Vibrational sum frequency generation (SFG) spectroscopy experiments and spectral SFG calculations validate consistency between the structure determined from MD and experiments. Overall, we show with strong agreement that lysozyme adopts an axial conformation at pH 7. Further, we provide molecular-level insight as to how pH influences the binding domains of lysozyme resulting in side-on adsorption near the isoelectric point of the lysozyme.

IR super-resolution imaging of avian feather keratins detected by using vibrational sum-frequency generation

IR super-resolution imaging of the cross section of the rachis of an avian feather was carried out by using a vibrational sum-frequency generation (VSFG) detected IR microscope with a sub-micrometer spatial resolution. In the YYX polarization combination, we clearly observed strong signals in the entire region of the rachis at the amide I vibration of β-keratin. On the other hand, the signal disappears from most of the cross section in the XXY polarization combination. Because the VSFG imaging detects the signal only from the interface, we conclude that the interfacial deflection inside of a rachis was detected.

Probing Biological Molecule Orientation and Polymer Surface Structure at the Polymer/Solution Interface In Situ

Polymers are widely used for many applications ranging from biomedical materials, marine antifouling coatings, membranes for biomolecule separation, to substrates for enzyme molecules for biosensing. For such applications, it is important to understand molecular interactions between biological molecules and polymer materials in situ in real time. Such understanding provides vital knowledge to manipulate biological molecule-polymer interactions and to optimize polymer surface structures to improve polymer performance. In this research, sum frequency generation (SFG) vibrational spectroscopy was applied to study interactions between peptides (serving as models for biological molecules) and deuterated polystyrene (d8-PS, serving as a model for polymer materials). The peptide conformations/orientations and polymer surface phenyl orientation during the peptide-d8-PS interactions were determined using SFG. It was found that the π-π interaction between the aromatic amino acids on peptides and phenyl groups on d8-PS surface does not play a significant role. Instead, the peptide-d8-PS interactions are mediated by general hydrophobic interactions between the peptides and the polymer surface.

Surface analysis tools for characterizing biological materials

Surfaces represent a unique state of matter that typically have significantly different compositions and structures from the bulk of a material. Since surfaces are the interface between a material and its environment, they play an important role in how a material interacts with its environment. Thus, it is essential to characterize, in as much detail as possible, the surface structure and composition of a material. However, this can be challenging since the surface region typically is only minute portion of the entire material, requiring specialized techniques to selectively probe the surface region. This tutorial will provide a brief review of several techniques used to characterize the surface and interface regions of biological materials. For each technique we provide a description of the key underlying physics and chemistry principles, the information provided, strengths and weaknesses, the types of samples that can be analyzed, and an example application. Given the surface analysis challenges for biological materials, typically there is never just one technique that can provide a complete surface characterization. Thus, a multi-technique approach to biological surface analysis is always required.

Lasalocid Acid Antibiotic at a Membrane Surface Probed by Sum Frequency Generation Spectroscopy

Carboxyl polyether ionophores (CPIs) are widely used as veterinary antibiotics and to increase food utilization in ruminating animals. Furthermore, CPIs can target drug-resistant bacteria, but detailed knowledge about their mode-of-action is needed to develop agents with a reasonable therapeutic index. It has been suggested that ionophores bind to membranes and incur large structural changes to shield a bound ion from the hydrophobic environment of the lipid bilayer for transport. One crucial piece of information is missing, however: Is it necessary for the free ionophore to adsorb on the membrane surface before interacting with a cation to facilitate cross-membrane ion transport? To answer this question, we applied sum-frequency generation (SFG) vibrational spectroscopy and surface tensiometry to identify the interaction between the prototypical CPI lasalocid acid (LA) and a model membrane. Observed changes in the surface pressure demonstrate that the free LA undergoes a self-assembly process with the lipid monolayer. Spectra taken from the lipid monolayer show that the free acid inserts partially into the lipid monolayer and then after complexation with sodium chloride disrupts the lipid monolayer. Overall, this study strongly suggests that this must be the crucial step of LA and metal ion complexation that allows the ionophore to traverse a lipid membrane.

Control of Protein Conformation and Orientation on Graphene

Graphene-based biosensors have attracted considerable attention due to their advantages of label-free detection and high sensitivity. Many such biosensors utilize noncovalent van der Waals force to attach proteins onto graphene surface while preserving graphene's high conductivity. Maintaining the protein structure without denaturation/substantial conformational change and controlling proper protein orientation on the graphene surface are critical for biosensing applications of these biosensors fabricated with proteins on graphene. Based on the knowledge we obtained from our previous experimental study and computer modeling of amino acid residual level interactions between graphene and peptides, here we systemically redesigned an important protein for better conformational stability and desirable orientation on graphene. In this paper, immunoglobulin G (IgG) antibody-binding domain of protein G (protein GB1) was studied to demonstrate how we can preserve the protein native structure and control the protein orientation on graphene surface by redesigning protein mutants. Various experimental tools including sum frequency generation vibrational spectroscopy, attenuated total refection-Fourier transform infrared spectroscopy, fluorescence spectroscopy, and circular dichroism spectroscopy were used to study the protein GB1 structure on graphene, supplemented by molecular dynamics simulations. By carefully designing the protein GB1 mutant, we can avoid strong unfavorable interactions between protein and graphene to preserve protein conformation and to enable the protein to adopt a preferred orientation. The methodology developed in this study is general and can be applied to study different proteins on graphene and beyond. With the knowledge obtained from this research, one could apply this method to optimize protein function on surfaces (e.g., to enhance biosensor sensitivity).

Probing the Interfacial Interactions of Monoclonal and Bispecific Antibodies at the Silicone Oil-Aqueous Solution Interface by Using Sum Frequency Generation Vibrational Spectroscopy

Silicone oil has been widely utilized in the pharmaceutical industry especially as a lubricant coating commonly used in syringes for the smooth delivery of drugs. Protein structure perturbation and aggregation have been reported upon protein contacting silicone oil by using indirect methods and ex-situ techniques. The conclusions derived from such indirect and ex-situ methods may not truly reflect the exact nature of the protein-silicone oil interfacial interactions. Recently, we have successfully demonstrated that sum frequency generation (SFG) vibrational spectroscopy can be used as a powerful and direct method of studying the fusion protein-silicone oil interfacial interactions in situ and in real time. In this article, we studied monoclonal and bispecific antibody interactions with the silicone oil surface by using SFG spectroscopy. Being structurally and functionally different in the nature of fusion proteins and antibodies, this study is important in enhancing our current understanding of protein-silicone oil interfacial interactions. Both types of antibodies investigated here readily and strongly adsorb onto the silicone oil surface and remain stable at least for 10 h. SFG spectra in the amide I region for monoclonal and bispecific antibodies centered at 1660 and 1665 cm^-1, respectively, suggest the difference in their molecular structures. The absence of the antibody signals in the amide I region of time-dependent and static SFG spectra obtained for preadsorbed antibodies onto silicone oil after contacting polysorbate 80 (PS-80) surfactant suggests that PS-80 can effectively remove both types of antibodies from the silicone oil surface. This study demonstrated the feasibility of using SFG spectroscopy as a powerful tool for probing the antibody-interfacial interactions in situ and in real time.

Both Poly(ethylene glycol) and Poly(methyl ethylene phosphate) Guide Oriented Adsorption of Specific Proteins

Developing new functional biomaterials requires the ability to simultaneously repel unwanted and guide wanted protein adsorption. Here, we systematically interrogate the factors determining the protein adsorption by comparing the behaviors of different polymeric surfaces, poly(ethylene glycol) and a poly(phosphoester), and five different natural proteins. Interestingly we observe that, at densities comparable to those used in nanocarrier functionalization, the same proteins are either adsorbed (fibrinogen, human serum albumin, and transferrin) or repelled (immunoglobulin G and lysozyme) by both polymers. However, when adsorption takes place, the specific surface dictates the amount and orientation of each protein.

Otoferlin C2F Domain-Induced Changes in Membrane Structure Observed by Sum Frequency Generation

Proteins that contain C2 domains are involved in a variety of biological processes, including encoding of sound, cell signaling, and cell membrane repair. Of particular importance is the interface activity of the C-terminal C2F domain of otoferlin due to the pathological mutations known to significantly disrupt the protein's lipid membrane interface binding activity, resulting in hearing loss. Therefore, there is a critical need to define the geometry and positions of functionally important sites and structures at the otoferlin-lipid membrane interface. Here, we describe the first in situ probe of the protein orientation of otoferlin's C2F domain interacting with a cell membrane surface. To identify this protein's orientation at the lipid interface, we applied sum frequency generation (SFG) vibrational spectroscopy and coupled it with simulated SFG spectra to observe and quantify the otoferlin C2F domain interacting with model lipid membranes. A model cell membrane was built with equal amounts of phosphatidylserine and phosphatidylcholine. SFG measurements of the lipids that make up the model membrane indicate a 62% increase in amplitude from the SFG signal near 2075 cm^-1 upon protein interaction, suggesting domain-induced changes in the orientation of the lipids and possible membrane curvature. This increase is related to lipid ordering caused by the docking interaction of the otoferlin C2F domain. SFG spectra taken from the amide-I region contain features near 1630 and 1670 cm^-1 related to the C2F domains beta-sandwich secondary structure, thus indicating that the domain binds in a specific orientation. By mapping the simulated SFG spectra to the experimentally collected SFG spectra, we found the C2F domain of otoferlin orients 22° normal to the lipid surface. This information allows us to map what portion of the domain directly interacts with the lipid membrane.

Molecular Mechanisms of Interactions between Monolayered Transition Metal Dichalcogenides and Biological Molecules

Single layered two-dimensional (2D) materials such as transition metal dichalcogenides (TMDs) show great potential in many microelectronic or nanoelectronic applications. For example, because of extremely high sensitivity, TMD-based biosensors have become promising candidates for next-generation label-free detection. However, very few studies have been conducted on understanding the fundamental interactions between TMDs and other molecules including biological molecules, making the rational design of TMD-based sensors (including biosensors) difficult. This study focuses on the investigations of the fundamental interactions between proteins and two widely researched single-layered TMDs, MoS₂, and WS₂ using a combined study with linear vibrational spectroscopy attenuated total reflectance FTIR and nonlinear vibrational spectroscopy sum frequency generation vibrational spectroscopy, supplemented by molecular dynamics simulations. It was concluded that a large surface hydrophobic region in a relatively flat location on the protein surface is required for the protein to adsorb onto a monolayered MoS₂ or WS₂ surface with preferred orientation. No disulfide bond formation between cysteine groups on the protein and MoS₂ or WS₂ was found. The conclusions are general and can be used as guiding principles to engineer proteins to attach to TMDs. The approach adopted here is also applicable to study interactions between other 2D materials and biomolecules.

Ab initio Modeling of the Vibrational Sum-Frequency Generation Spectrum of Interfacial Water

Understanding the structural and dynamical features of interfacial water is of greatest interest in physics, chemistry, biology, and materials science. Vibrational sum-frequency generation (SFG) spectroscopy, which is sensitive to the molecular orientation and dynamics on the surfaces or at the interfaces, allows one to study a wide variety of interfacial systems. The structural and dynamical features of interfacial water at the air/water interface have been extensively investigated by SFG spectroscopy. However, the interpretations of the spectroscopic features have been under intense debate. Here, we report a simulated SFG spectrum of the air/water interface based on ab initio molecular dynamics simulations, which covers the OH stretching, bending, and libration modes of interfacial water. Quantitative agreement between our present simulations and the most recent experimental studies ensures that ab initio simulations predict unbiased structural features and electrical properties of interfacial systems. By utilizing the kinetic energy spectral density (KESD) analysis to decompose the simulated spectra, the spectroscopic features can then be assigned to specific hydrogen-bonding configurations of interfacial water molecules.

Structure of von Willebrand factor A1 on polystyrene determined from experimental and calculated sum frequency generation spectra

The blood-clotting protein von Willebrand factor (vWF) can be activated by small molecules, high shear stress, and interactions with interfaces. It subsequently binds platelet receptor glycoprotein Ibα (GPIbα) at the surface of platelets, thereby playing a crucial role in blood clotting due to platelet activation, which is an important process to consider in the design of cardiovascular implants and biomaterials used in blood-contacting applications. The influence of surfaces on the activation and the molecular-level structure of surface-bound vWF is largely unknown. Recent studies have indicated that when bound to hydrophobic polystyrene (PS), the A1 domain of vWF remains accessible for GPIbα binding. However, the detailed secondary structure and exact orientation of vWF A1 at the PS surface is still unresolved. Here, the authors resolve these features by studying the system with sum-frequency generation (SFG) spectroscopy. The data are consistent with a scenario where vWF A1 maintains a native secondary structure when bound to PS. Comparison of experimental and calculated SFG spectra combined with previously reported time-of-flight secondary ion mass spectrometry data suggests that A1 assumes an orientation with the GPIbα binding domain oriented away from the solid surface and exposed to the solution phase. This structural information will benefit future in vitro experiments with surface-adsorbed A1 domain and may have relevance for the design of novel blood-contacting biomaterials and wound-healing applications.

Chemically Immobilized Antimicrobial Peptide on Polymer and Self-Assembled Monolayer Substrates

Surfaces with chemically immobilized antimicrobial peptides have been shown to have great potential in various applications such as biosensors and antimicrobial coatings. This research investigated the chemical immobilization of a cecropin-melittin hybrid antimicrobial peptide on two different surfaces, a polymer surface prepared by chemical vapor deposition (CVD) polymerization and a self-assembled monolayer surface. We probed the structure of immobilized peptides using spectroscopic methods and correlated such structural information to the measured antimicrobial activity. We found that the hybrid peptide adopts an α-helical structure after immobilization onto both surfaces. As we have shown previously for another α-helical peptide, MSI-78, immobilized on a SAM, we found that the α-helical hybrid peptide lies down when it contacts bacteria. This study shows that the antimicrobial activity of the surface-immobilized peptides on the two substrates can be well explained by the spectroscopically measured peptide structural data. In addition, it was found that the polymer-based antimicrobial peptide coating is more stable. This is likely due to the fact that the SAM prepared using silane may be degraded after several days whereas the polymer prepared by CVD polymerization is more stable than the SAM, leading to a more stable antimicrobial coating.

Engineering Proteins at Interfaces: From Complementary Characterization to Material Surfaces with Designed Functions

Once materials come into contact with a biological fluid containing proteins, proteins are generally—whether desired or not—attracted by the material's surface and adsorb onto it. The aim of this Review is to give an overview of the most commonly used characterization methods employed to gain a better understanding of the adsorption processes on either planar or curved surfaces. We continue to illustrate the benefit of combining different methods to different surface geometries of the material. The thus obtained insight ideally paves the way for engineering functional materials that interact with proteins in a predetermined manner.

Nonlinear Optical Methods for Characterization of Molecular Structure and Surface Chemistry

The principles, strengths and limitations of several nonlinear optical (NLO) methods for characterizing biological systems are reviewed. NLO methods encompass a wide range of approaches that can be used for real-time, in-situ characterization of biological systems, typically in a label-free mode. Multiphoton excitation fluorescence (MPEF) is widely used for high-quality imaging based on electronic transitions, but lacks interface specificity. Second harmonic generation (SHG) is a parametric process that has all the virtues of the two-photon version of MPEF, yielding a signal at twice the frequency of the excitation light, which provides interface specificity. Both SHG and MPEF can provide images with high structural contrast, but they typically lack molecular or chemical specificity. Other NLO methods such as coherent anti-Stokes Raman scattering (CARS) and stimulated Raman scattering (SRS) can provide high-sensitivity imaging with chemical information since Raman active vibrations are probed. However, CARS and SRS lack interface and surface specificity. A NLO method that provides both interface/surface specificity as well as molecular specificity is vibrational sum frequency generation (SFG) spectroscopy. Vibration modes that are both Raman and IR active are probed in the SFG process, providing the molecular specificity. SFG, like SHG, is a parametric process, which provides the interface and surface specificity. SFG is typically done in the reflection mode from planar samples. This has yielded rich and detailed information about the molecular structure of biomaterial interfaces and biomolecules interacting with their surfaces. However, 2-D systems have limitations for understanding the interactions of biomolecules and interfaces in the 3-D biological environment. The recent advances made in instrumentation and analysis methods for sum frequency scattering (SFS) now present the opportunity for SFS to be used to directly study biological solutions. By detecting the scattering at angles away from the phase-matched direction even centrosymmetric structures that are isotropic (e.g., spherical nanoparticles functionalized with self-assembled monolayers or biomolecules) can be probed. Often a combination of multiple NLO methods or a combination of a NLO method with other spectroscopic methods is required to obtain a full understanding of the molecular structure and surface chemistry of biomaterials and the biomolecules that interact with them. Using the right combination methods provides a powerful approach for characterizing biological materials.

Influenza A M2 transmembrane domain tunes its conformational heterogeneity and structural plasticity in the lipid bilayer by forming loop structures

We discovered for the first time that the influenza A virus M2TM tunes its conformational heterogeneity and structural plasticity to respond to environmental cues by undergoing a helix-to-loop transition, resolving controversies regarding the mechanism of proton conduction and plasticity of the M2TM in lipid bilayers.

Structures and Adhesion Properties at Polyethylene/Silica and Polyethylene/Nylon Interfaces

The molecular structures of buried interfaces of maleic anhydride grafted and ungrafted polyethylene films with silica and nylon surfaces were studied in situ using sum-frequency generation (SFG) vibrational spectroscopy. Grafting maleic anhydride to polyethylene altered the molecular structures at buried interfaces, including changing the orientation of polymer methylene groups and resulting in the presence of C═O groups at silica interfaces. These molecular level changes are correlated with enhanced adhesion properties, with ordered C═O groups and in-plane orientation of the methylene groups associated with higher levels of adhesion. While improved adhesion was observed for grafted polyethylene at the nylon interface, no C═O groups were detected at the interface using SFG, for films thermally treated at 185 °C. In this case, either no C═O groups are present at the interface or they are disordered; the latter explanation is more likely, considering the observed improvement in adhesion.

Monitoring the Orientational Changes of Alamethicin during Incorporation into Bilayer Lipid Membranes

Antimicrobial peptides (AMPs) are the first line of defense after contact of an infectious invader, for example, bacterium or virus, with a host and an integral part of the innate immune system of humans. Their broad spectrum of biological functions ranges from cell membrane disruption over facilitation of chemotaxis to interaction with membrane-bound or intracellular receptors, thus providing novel strategies to overcome bacterial resistances. Especially, the clarification of the mechanisms and dynamics of AMP incorporation into bacterial membranes is of high interest, and different mechanistic models are still under discussion. In this work, we studied the incorporation of the peptaibol alamethicin (ALM) into tethered bilayer lipid membranes on electrodes in combination with surface-enhanced infrared absorption (SEIRA) spectroscopy. This approach allows monitoring the spontaneous and potential-induced ion channel formation of ALM in situ. The complex incorporation kinetics revealed a multistep mechanism that points to peptide-peptide interactions prior to penetrating the membrane and adopting the transmembrane configuration. On the basis of the anisotropy of the backbone amide I and II infrared absorptions determined by density functional theory calculations, we employed a mathematical model to evaluate ALM reorientations monitored by SEIRA spectroscopy. Accordingly, ALM was found to adopt inclination angles of ca. 69°-78° and 21° in its interfacially adsorbed and transmembrane incorporated states, respectively. These orientations can be stabilized efficiently by the dipolar interaction with lipid head groups or by the application of a potential gradient. The presented potential-controlled mechanistic study suggests an N-terminal integration of ALM into membranes as monomers or parallel oligomers to form ion channels composed of parallel-oriented helices, whereas antiparallel oligomers are barred from intrusion.

Repelling and ordering: the influence of poly(ethylene glycol) on protein adsorption

Development of new materials for drug delivery and biosensing requires the fine-tuning of interfacial properties. We report here the influence of the poly(ethylene glycol) (PEG) grafting density in model phospholipid monolayers on the adsorption behavior of bovine serum albumin and human fibrinogen, not only with respect to the amount of adsorbed protein, but also its orientational ordering on the surface. As expected, with increasing interfacial PEG density, the amount of adsorbed protein decreases up to the point where complete protein repellency is reached. However, at intermediate concentrations, the net orientation of adsorbed fibrinogen is highest. The different proteins respond differently to PEG, not only in the amount of protein adsorbed, but also in the manner that proteins adsorb. The results show that for specific cases, tuning the interfacial PEG concentration allows to guide the protein adsorption configuration, a feature sought after in materials for both biosensing and biomedical applications.

Monitoring Antimicrobial Mechanisms of Surface-Immobilized Peptides in Situ

Antimicrobial peptides (AMPs) in free solution can kill bacteria by disrupting bacterial cell membranes. Their modes of action have been extensively studied, and various models ranging from pore formation to carpet-like mechanisms were proposed. Surface-immobilized AMPs have been used as coatings to kill bacteria and as sensors to capture bacteria, but the interaction mechanisms of surface-immobilized AMPs and bacteria are not fully understood. In this research, an analytical platform, sum frequency generation (SFG) microscope, which is composed of an SFG vibrational spectrometer and a fluorescence microscope, was used to probe molecular interactions between surface-immobilized AMPs and bacteria in situ in real time at the solid/liquid interface. SFG probed the molecular structure of surface-immobilized AMPs while interacting with bacteria, and fluorescence images of dead bacteria were monitored as a function of time during the peptide-bacteria interaction. It was believed that upon bacteria contact, the surface-immobilized peptides changed their orientation and killed bacteria. This research demonstrated that the SFG microscope platform can examine the structure and function (bacterial killing) at the same time in the same sample environment, providing in-depth understanding on the structure-activity relationships of surface-immobilized AMPs.

Interactions between Surface-Immobilized Antimicrobial Peptides and Model Bacterial Cell Membranes

Sum frequency generation (SFG) vibrational spectroscopy was used to study surface immobilization effects on the interactions between antimicrobial peptide cecropin P1 (CP1) and model cell membranes. While free CP1 in solution interacted with a model cell membrane composed of a phosphatidylglycerol (PG) bilayer, electrostatic interaction led to the attachment of CP1 molecules onto the PG surface and the hydrophobic domain in the lipid bilayer enabled the peptides to insert into the bilayer and form α-helices from random coil structures. While CP1 molecules immobilized on a self-assembled monolayer interacted with PG lipid vesicles, the intensity of the SFG peak for the peptide α-helix decreased as the PG vesicle concentration increased. It was believed that when surface-immobilized CP1 molecules interacted with lipid vesicles, they lay down on the surface or became random coils. When the immobilized CP1 interacted with a PG lipid monolayer on water, the strong interaction led to the lying-down orientation of all of the surface-immobilized peptides as well. Differently, no significant interactions between surface-immobilized CP1 with the mammalian cell membrane model 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine bilayer were observed. Our results suggest that, instead of membrane insertion, the electrostatic interactions between the surface cationic charges of CP1 and anionic bacterial membranes may play an important role in the antimicrobial activity of the surface-immobilized CP1 peptide.

Ice-binding site of surface-bound type III antifreeze protein partially decoupled from water

Combined SFG/MD analysis together with spectral calculations revealed that type III antifreeze proteins adsorbed at the air–water interface maintains a native state and adopts an orientation that leads to a partial decoupling of its ice-binding site from water.

Molecular interactions between single layered MoS2 and biological molecules

In this research, molecular interactions between several de novo designed alpha-helical peptides and monolayer MoS₂ have been studied.

Two-dimensional (2D) materials such as graphene, molybdenum disulfide (MoS₂), tungsten diselenide (WSe₂), and black phosphorous are being developed for sensing applications with excellent selectivity and high sensitivity. In such applications, 2D materials extensively interact with various analytes including biological molecules. Understanding the interfacial molecular interactions of 2D materials with various targets becomes increasingly important for the progression of better-performing 2D-material based sensors. In this research, molecular interactions between several de novo designed alpha-helical peptides and monolayer MoS₂ have been studied. Molecular dynamics simulations were used to validate experimental data. The results suggest that, in contrast to peptide–graphene interactions, peptide aromatic residues do not interact strongly with the MoS₂ surface. It is also found that charged amino acids are important for ensuring a standing-up pose for peptides interacting with MoS₂. By performing site-specific mutations on the peptide, we could mediate the peptide–MoS₂ interactions to control the peptide orientation on MoS₂.

Binding of the GTPase Sar1 to a Lipid Membrane Monolayer: Insertion and Orientation Studied by Infrared Reflection⁻Absorption Spectroscopy

Membrane-interacting proteins are polyphilic polymers that engage in dynamic protein–protein and protein–lipid interactions while undergoing changes in conformation, orientation and binding interfaces. Predicting the sites of interactions between such polypeptides and phospholipid membranes is still a challenge. One example is the small eukaryotic GTPase Sar1, which functions in phospholipid bilayer remodeling and vesicle formation as part of the multimeric coat protein complex (COPII). The membrane interaction of Sar1 is strongly dependent on its N-terminal 23 amino acids. By monolayer adsorption experiments and infrared reflection-absorption spectroscopy (IRRAS), we elucidate the role of lipids in inducing the amphipathicity of this N-terminal stretch, which inserts into the monolayer as an amphipathic helix (AH). The AH inserting angle is determined and is consistent with the philicities and spatial distribution of the amino acid monomers. Using an advanced method of IRRAS data evaluation, the orientation of Sar1 with respect to the lipid layer prior to the recruitment of further COPII proteins is determined. The result indicates that only a slight reorientation of the membrane-bound Sar1 is needed to allow coat assembly. The time-course of the IRRAS analysis corroborates a role of slow GTP hydrolysis in Sar1 desorption from the membrane.

Sum Frequency Generation Vibrational Spectroscopy for Characterization of Buried Polymer Interfaces

Sum frequency generation vibrational spectroscopy (SFG-VS) has become one of the most appealing technologies to characterize molecular structures at interfaces. In this focal point review, we focus on SFG-VS studies at buried polymer interfaces and review many of the recent publications in the field. We also cover the essential theoretical background of SFG-VS and discuss the experimental implementation of SFG-VS.