Investigation of the Radical Product Channel of the CH3OCH2O2 + HO2 Reaction in the Gas Phase

Bimolecular Peroxy Radical (RO2) Reactions and Their Relevance in Radical Initiated Oxidation of Hydrocarbons

The kinetics of peroxy radical (RO₂) reactions have been of long-standing interest in atmospheric and combustion chemistry. Nevertheless, the lack of kinetic studies at higher temperatures for their reactions with other radicals such as OH has precluded the inclusion of this class of reactions in detailed kinetics models developed for combustion applications. In this work, guided by the limited room-temperature experimental studies on selected alkyl-peroxy radicals and literature theoretical kinetics on the prototypical CH₃O₂ + OH system, we have performed parametric studies on the effect of uncertainties in the rate coefficients and branching ratios to potential product channels for RO₂ + OH reactions at higher temperatures. Literature kinetics models were used to simulate autoignition delays, laminar flame speeds, and speciation profiles in flow and stirred reactors for a variety of common combustion-relevant fuels. Inclusion of RO₂ + OH reactions was found to retard autoignition in fuel-lean (φ = 0.5) mixtures of ethane and dimethyl ether in air. The observed effects were noticeably more pronounced in ozone-enriched combustion of ethane and dimethyl ether. The simulations also examined the influence of ozone doping levels, pressures, and equivalence ratios for both ethane and dimethyl ether oxidation. Sensitivity and flux analyses revealed that the RO₂ + OH reaction is a significant sink of RO₂ radicals at the early stage of autoignition, affecting fuel oxidation through RO₂ ↔ QOOH, RO₂ ↔ alkene + HO₂, or RO₂ + HO₂ ↔ ROOH + O₂. Additionally, the kinetic stability of the trioxide formed from RO₂ + OH reactions was investigated using master equation analyses. Last, we discuss other bimolecular reactions that are missing in literature kinetics models but are relevant to hydrocarbon oxidation initiated by external radical sources (plasma-enhanced, ozone-enriched combustion, etc.). The present simulations provide a strong motivation for better characterizing the bimolecular kinetics of peroxy radicals.

The influence of (H2O)1-2 in the HOBr + HO2 gas-phase reaction

The HOBr + HO₂ reaction in the absence of water has three different channels for the abstraction of H to generate the corresponding products. The dominant channel is the generation of BrO + H₂O₂. The introduction of water molecules influences this dominant reaction via the way the reactants interact with the water molecules. The addition of water molecules decreases the energy barrier and increases the rate coefficient of the reaction. Interestingly, water works as a catalyst and we obtain BrO + H₂O₂, like in the reaction without water, or the water works as a reactant and we obtain products other than BrO + H₂O₂. The rate coefficients of the HOBr + HO₂ reaction in the presence of water are calculated to be faster than the reaction in the absence of water. However, other pathways in the presence of water are slower than the reaction in the absence of water. The water-assisted effective rate coefficients for the HOBr + HO₂ reaction are also larger than those for the reaction in the absence of water. The influence of a water dimer is not as important when compared with one water molecule. In summary, a single water molecule has a positive catalytic influence in enhancing the HOBr + HO₂ reaction.

OH Radical and Chlorine Atom Kinetics of Substituted Aromatic Compounds: 4-chlorobenzotrifluoride (p-ClC6H4CF3)

The mechanisms for the OH radical and Cl atom gas-phase reaction kinetics of substituted aromatic compounds remain a topic of atmospheric and combustion chemistry research. 4-Chlorobenzotrifluoride (p-chlorobenzotrifluoride, p-ClC₆H₄CF₃, PCBTF) is a commonly used substituted aromatic volatile organic compound (VOC) in solvent-based coatings. As such, PCBTF is classified as a volatile chemical product (VCP) whose release into the atmosphere potentially impacts air quality. In this study, rate coefficients, k₁, for the OH + PCBTF reaction were measured over the temperature ranges 275-340 and 385-940 K using low-pressure discharge flow-tube reactors coupled with a mass spectrometer detector in the ICARE/CNRS (Orléans, France) laboratory. k₁(298-353 K) was also measured using a relative rate method in the thermally regulated atmospheric simulation chamber (THALAMOS; Douai, France). k₁(T) displayed a non-Arrhenius temperature dependence with a negative temperature dependence between 275 and 385 K given by k₁(275-385 K) = (1.50 ± 0.15) × 10^-14 exp((705 ± 30)/T) cm³ molecule^-1 s^-1, where k₁(298 K) = (1.63 ± 0.03) × 10^-13 cm³ molecule^-1 s^-1 and a positive temperature dependence at elevated temperatures given by k₁(470-950 K) = (5.42 ± 0.40) × 10^-12 exp(-(2507 ± 45) /T) cm³ molecule^-1 s^-1. The present k₁(298 K) results are in reasonable agreement with two previous 296 K (760 Torr, syn. air) relative rate measurements. The rate coefficient for the Cl-atom + PCBTF reaction, k₂, was also measured in THALAMOS using a relative rate technique that yielded k₂(298 K) = (7.8 ± 2) × 10^-16 cm³ molecule^-1 s^-1. As part of this work, the UV and infrared absorption spectra of PCBTF were measured (NOAA; Boulder, CO, USA). On the basis of the UV absorption spectrum, the atmospheric instantaneous UV photolysis lifetime of PCBTF (ground level, midlatitude, Summer) was estimated to be 3-4 days, assuming a unit photolysis quantum yield. The non-Arrhenius behavior of the OH + PCBTF reaction over the temperature range 275 to 950 K is interpreted using a mechanism for the formation of an OH-PCBTF adduct and its thermochemical stability. The results from this study are included in a discussion of the OH radical and Cl atom kinetics of halogen substituted aromatic compounds for which only limited temperature-dependent kinetic data are available.

Gas-Phase Oxidation Rates and Products of 1,2-Dihydroxy Isoprene

1,2-Dihydroxy isoprene (1,2-DHI), a product of isoprene oxidation from multiple chemical pathways, is produced in the atmosphere in large quantities; however, its chemical fate has not been comprehensively studied. Here, we perform chamber experiments to investigate its gas-phase reactions. We find that the reactions of 1,2-DHI with OH radicals and ozone are rapid (k_OH = 8.0 (±1.3) × 10^-11 cm³ molecule^-1 s^-1; k_O3 = 7.2 (±1.1) × 10^-18 cm³ molecule^-1 s^-1). Reaction with OH, which dominates 1,2-DHI loss, leads primarily to fragmentation and radical recycling; major products under both high- and low-NO conditions include hydroxyacetone, glycolaldehyde, and 2,3-dihydroxy-2-methyl-propanal (DHMP). Radical-terminating hydroperoxide formation from the peroxy radical (RO₂) reaction with HO₂ and organonitrate formation from RO₂ + NO are not observed in the gas phase, possibly due to low volatility; constraints for their branching ratios are instead derived by mass balance. We also measure secondary organic aerosol mass yields from 1,2-DHI (0-23%) and show that oxidation in the presence of aqueous particles leads to formic and acetic acid production. Finally, we incorporate results into GEOS-Chem, a global chemical transport model, to compute the global production (25.3 Tg a^-1) and gas-phase loss (20.2 Tg a^-1) of 1,2-DHI and show that its oxidation provides non-negligible contributions to the atmospheric budgets of hydroxyacetone, glycolaldehyde, hydroxymethyl hydroperoxide, formic acid, and DHMP.

Gas-Phase Reactions of Isoprene and Its Major Oxidation Products

Isoprene carries approximately half of the flux of non-methane volatile organic carbon emitted to the atmosphere by the biosphere. Accurate representation of its oxidation rate and products is essential for quantifying its influence on the abundance of the hydroxyl radical (OH), nitrogen oxide free radicals (NO _x), ozone (O₃), and, via the formation of highly oxygenated compounds, aerosol. We present a review of recent laboratory and theoretical studies of the oxidation pathways of isoprene initiated by addition of OH, O₃, the nitrate radical (NO₃), and the chlorine atom. From this review, a recommendation for a nearly complete gas-phase oxidation mechanism of isoprene and its major products is developed. The mechanism is compiled with the aims of providing an accurate representation of the flow of carbon while allowing quantification of the impact of isoprene emissions on HO _x and NO _x free radical concentrations and of the yields of products known to be involved in condensed-phase processes. Finally, a simplified (reduced) mechanism is developed for use in chemical transport models that retains the essential chemistry required to accurately simulate isoprene oxidation under conditions where it occurs in the atmosphere-above forested regions remote from large NO _x emissions.

Mechanism and kinetics for the reactions of methacrolein and methyl vinyl ketone with HO2 radical

The mechanism and kinetics for the reactions of unsaturated aldehyde and ketone with HO₂ radical were investigated.

Isoprene NO3 Oxidation Products from the RO2 + HO2 Pathway

We describe the products of the reaction of the hydroperoxy radical (HO(2)) with the alkylperoxy radical formed following addition of the nitrate radical (NO(3)) and O(2) to isoprene. NO(3) adds preferentially to the C(1) position of isoprene (>6 times more favorably than addition to C(4)), followed by the addition of O(2) to produce a suite of nitrooxy alkylperoxy radicals (RO(2)). At an RO(2) lifetime of ∼30 s, δ-nitrooxy and β-nitrooxy alkylperoxy radicals are present in similar amounts. Gas-phase product yields from the RO(2) + HO(2) pathway are identified as 0.75-0.78 isoprene nitrooxy hydroperoxide (INP), 0.22 methyl vinyl ketone (MVK) + formaldehyde (CH(2)O) + hydroxyl radical (OH) + nitrogen dioxide (NO(2)), and 0-0.03 methacrolein (MACR) + CH(2)O + OH + NO(2). We further examined the photochemistry of INP and identified propanone nitrate (PROPNN) and isoprene nitrooxy hydroxyepoxide (INHE) as the main products. INHE undergoes similar heterogeneous chemistry as isoprene dihydroxy epoxide (IEPOX), likely contributing to atmospheric secondary organic aerosol formation.

Rate Coefficients for the Gas-Phase Reactions of Hydroxyl Radicals with a Series of Methoxylated Aromatic Compounds

Rate coefficients for the reactions of hydroxyl radicals (OH) with a series of oxygenated aromatics (two methoxybenzene and five methoxyphenol isomers) have been obtained using the relative kinetic method in 1080 and 480 L photoreactors at the University of Wuppertal, Germany. The experiments were realized at 295 ± 2 K and 1 bar total pressure of synthetic air using in situ Fourier transform infrared spectroscopy for the chemical analysis. The following rate coefficients (in units of cm(3) molecule(-1) s(-1)) were determined: methoxybenzene (anisole), (2.08 ± 0.21) × 10(-11); 1-methoxy-2-methylbenzene, (4.56 ± 0.50) × 10(-11); 2-methoxyphenol (guaiacol), (5.40 ± 0.72) × 10(-11); 3-methoxyphenol, (6.93 ± 0.67) × 10(-11); 4-methoxyphenol, (5.66 ± 0.55) × 10(-11); 2-methoxy-4-methylphenol, (7.51 ± 0.68) × 10(-11); 2,3-dimethoxyphenol, (7.49 ± 0.81) × 10(-11); and 2,6-dimethoxyphenol (syringol), (8.10 ± 0.98) × 10(-11). The rate coefficients for the reactions of OH with 2,3-dimethoxyphenol and 1-methoxy-2-methylbenzene are first time measurements. The rate coefficients determined in this work are compared with previous determinations reported in the literature and also with the values estimated using a structure-activity relationship method. A comparison is performed between the OH rate coefficients obtained for methoxylated aromatics with those of other substituted aromatics in order to understand the influence of the type, number, and position of the different substituents on the reactivity of aromatics toward OH. In addition, a comparison is made between the OH and Cl rate coefficients for the compounds. The principal atmospheric sink of these methoxylated aromatic compounds during daytime is their reaction with OH radicals. The corresponding lifetimes for reaction with OH radicals and Cl atoms are 2-8 and 11-50 h, respectively.

Theoretical study of the mechanisms and kinetics of the reactions of hydroperoxy (HO2) radicals with hydroxymethylperoxy (HOCH2O2) and methoxymethylperoxy (CH3OCH2O2) radicals

The peroxy–peroxy radical reactions show spin, conformation and temperature dependence, forming formic acid and hydroxyl radicals.

Theoretical Study of the HOCH2OO• + HO2 • Reaction: Detailed Molecular Mechanisms of the Three Reaction Channels

The HO2 • + HOCH2OO• reaction was theoretically investigated, using various high-level, single-reference Complete Basis Set methods including CBS-QB3, CBS-QCI/APNO and CBS-Q(MPW1B95) and a new multi-reference CI-PT2 approach. Three major product channels under atmospheric conditions were identified and their molecular mechanisms elucidated in great detail by Intrinsic Reaction Coordinate Analyses (IRC) at the B3LYP/6–311G(d,p) level: (i) Direct head-to-tail H-atom abstraction from the hydroperoxy radical by the alkylperoxy, occurring on the triplet Potential Energy Surface (PES) leading to HOCH2OOH + O2; (ii) A two-step rearrangement of the initial singlet HOCH2OOOOH tetroxide complex to form HC(O)OH + •OH + HO2 •; (iii) A multi-step rearrangement of the initial HOCH2OOOOH tetroxide to yield HC(O)OH + O2(1Δ) + H2O, about twice as fast as the former channel on the singlet-surface. The findings provide an explanation for the observed hydroxyl radical formation in this reaction (Jenkin et al., Phys. Chem. Chem. Phys. 9 (2007) 3149) and rationalize the high overall rate and its pronounced negative temperature dependence (Veyret et al., J. Phys. Chem. 93 (1989) 2368).