Structural Changes of Monolayers at the Air/Water Interface Contacted with n-Alkanes

Zwitterionic and Charged Lipids Form Remarkably Different Structures on Nanoscale Oil Droplets in Aqueous Solution

The molecular structure of zwitterionic and charged monolayers on small oil droplets in aqueous solutions is determined using a combined second harmonic and sum frequency study. From the interfacial vibrational signature of the acyl chains and phosphate headgroups as well as the response of the hydrating water, we find that zwitterionic and charged lipids with identical acyl chains form remarkably different monolayers. Zwitterionic phospholipids form a closely packed monolayer with highly ordered acyl tails. In contrast, the charged phospholipids form a monolayer with a low number density and disordered acyl tails. The charged headgroups are oriented perpendicular to the monolayer rather than parallel, as is the case for zwitterionic lipids. These significant differences between the two types of phospholipids indicate important roles of phospholipid headgroups in the determination of properties of cellular membranes and lipid droplets. The observed behavior of charged phospholipids is different from expectations based on studies performed on extended planar interfaces, at which condensed monolayers are readily formed. The difference can be explained by nanoscale related changes in charge condensation behavior that has its origin in a different balance of interfacial intermolecular interactions.

Quantum chemical analysis of thermodynamics of 2D cluster formation of alkanes at the water/vapor interface in the presence of aliphatic alcohols

Using the quantum chemical semi-empirical PM3 method it is shown that aliphatic alcohols favor the spontaneous clusterization of vaporous alkanes at the water surface due to the change of adsorption from the barrier to non-barrier mechanism. A theoretical model of the non-barrier mechanism for monolayer formation is developed. In the framework of this model alcohols (or any other surfactants) act as 'floats', which interact with alkane molecules of the vapor phase using their hydrophobic part, whereas the hydrophilic part is immersed into the water phase. This results in a significant increase of contact effectiveness of alkanes with the interface during the adsorption and film formation. The obtained results are in good agreement with the existing experimental data. To test the model the thermodynamic and structural parameters of formation and clusterization are calculated for vaporous alkanes C(n)H(2n+2) (n(CH3) = 6-16) at the water surface in the presence of aliphatic alcohols C(n)H(2n+1)OH (n(OH) = 8-16) at 298 K. It is shown that the values of clusterization enthalpy, entropy and Gibbs' energy per one monomer of the cluster depend on the chain lengths of corresponding alcohols and alkanes, the alcohol molar fraction in the monolayers formed, and the shift of the alkane molecules with respect to the alcohol molecules Δn. Two possible competitive structures of mixed 2D film alkane-alcohol are considered: 2D films 1 with single alcohol molecules enclosed by alkane molecules (the alcohols do not form domains) and 2D films 2 that contain alcohol domains enclosed by alkane molecules. The formation of the alkane films of the first type is nearly independent of the surfactant type present at the interface, but depends on their molar fraction in the monolayer formed and the chain length of the compounds participating in the clusterization, whereas for the formation of the films of the second type the interaction between the hydrophilic parts of the surfactant is essential and different for various types of amphiphilic compounds. The energetic preference of the film formation of both types depends significantly on the chain length of compounds. The surfactant concentration (in the range of X = 0-10%) exerts a slight influence on the process of film formation.

Three Dimensional Nano "Langmuir Trough" for Lipid Studies

A three-dimensional-phospholipid monolayer with tunable molecular structure was created on the surface of oil nanodroplets from a mixture of phospholipids, oil, and water. This simple nanoemulsion preparation technique generates an in situ prepared membrane model system with controllable molecular surface properties that resembles a lipid droplet. The molecular interfacial structure of such a nanoscopic system composed of hexadecane, 1,2-dihexadecanoyl-sn-glycero-3-phosphocholine (DPPC), and water was determined using vibrational sum frequency scattering and second harmonic scattering techniques. The droplet surface structure of DPPC can be tuned from a tightly packed liquid condensed phase like monolayer to a more dilute one that resembles the liquid condensed/liquid expanded coexistence phase by varying the DPPC/oil/water ratio. The tunability of the chemical structure, the high surface-to-volume ratio, and the small sample volume make this system an ideal model membrane for biochemical research.

The cellular environment of cancerous human tissue. Interfacial and dangling water as a "hydration fingerprint"

Despite a large number of publications, the role of water in the cellular environment of biological tissue has not been clarified. Characterizing the biological interface is a key challenge in understanding the interactions of water in the tissue. Although we often assume that the properties of the bulk water can be translated to the crowded biological environment, this approach must be considerably revised when considering the biological interface. To our knowledge, few studies have directly monitored the interactions and accumulation of water in the restricted environments of the biological tissue upon realistic crowding conditions. The present study focuses on a molecular picture of water molecules at the biological interface, or specifically, water molecules adjacent to the hydrophobic and hydrophilic surfaces of normal and cancerous tissues. We recorded and analyzed the IR and Raman spectra of the νs(OH) stretching modes of water at the biological interfaces of the human breast and neck tissues. The results revealed dramatic changes in the water content in the tissue and are potentially relevant to both the fundamental problems of interfacial water modeling and the molecular diagnostics of cancer as a 'hydration fingerprint'. Herein, we will discuss the origin of the vibrational substructures observed for the νs(OH) stretching modes of water, showing that the interfacial water interacting via H-bond with other water molecules and biomolecules at the biological surface and free OH vibration of the dangling water are sensitive indicators of the pathology between the normal (noncancerous) and cancerous tissue and cancer types.

Grazing incidence X-ray diffraction studies of condensed double-chain phospholipid monolayers formed at the soft air/water interface

The use of highly brilliant synchrotron light sources in the middle of the 1980s for X-ray diffraction has revolutionized the research of condensed monolayers. Since then, monolayers gained popularity as convenient quasi two-dimensional model systems widely used in biophysics and material science. This review focuses on structures observed in one-component phospholipid monolayers used as simplified two-dimensional models of biological membranes. In a monolayer system the phase transitions can be easily triggered at constant temperature by increasing the packing density of the lipids by compression. Simultaneously the monolayer structure changes are followed in situ by grazing incidence X-ray diffraction. Competing interactions between the different parts of the molecule are responsible for the different monolayer structures. These forces can be modified by chemical variations of the hydrophobic chain region, of the hydrophilic head group region or of the interfacial region between chains and head groups. Modifications of monolayer structures triggered by changes of the chemical structure of double-chain phospholipids are highlighted in this paper.

Coarse-graining poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers using the MARTINI force field

The MARTINI coarse-grain (CG) force field is extended for a class of triblock block copolymers known as Pluronics. Existing MARTINI bead types are used to model the non-bonded part of the potential while single chain properties for both homopolymers, poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), are used to develop the bonded interactions. The new set of force field parameters reproduces structural and dynamical properties of high molecular weight homo- and copolymers. The CG model is moderately transferable in solvents of different polarity and concentration; however, the PEO homopolymer model presents a reduced thermodynamic transferability especially in water probably due to the lack of hydrogen bonds with the solvent. Our simulations of a monolayer of Pluronic L44 show polymer-brush-like characteristics for the PEO segments which protrude into the aqueous phase. Other membrane properties not easily accessible using experimental techniques such as its membrane thickness are also calculated.

Effects on the self-assembly of n-alkane/gold nanoparticle mixtures spread at the air-water interface

Nanoparticle films formed at the air-water interface readily form rigid films, where the nanoparticles irreversibly associate into floating "islands", often riddled with voids and defects, upon solvent evaporation. Improving the nanoparticle mobility in these films is key to achieving control over the nanoparticle packing parameters, which is attractive for a variety of applications. In this study, a variety of n-alkanes were mixed with tetradecanethiol-capped 2 nm gold nanoparticles and studied as Langmuir films at 18 and 32 °C. Pressure-area isotherms at 18 °C reveal a mixed liquid-expanded phase of nanoparticles and alkane at the air-water interface, but only for n-alkanes that are equal to or exceed the nanoparticle capping ligand in carbon chain length. Transmission electron microscopy images of the corresponding films suggest that the nanoparticles are mixed with a continuous hydrocarbon phase at 0 mN/m and that the hydrocarbon is squeezed out of the nanoparticle film during compression.

On the inclusion of alkanes into the monolayer of aliphatic alcohols at the water/alkane vapor interface: a quantum chemical approach

In the framework of the quantum chemical semiempirical PM3 method thermodynamic and structural parameters of the formation and clusterization of aliphatic alcohols C(n)H(2n+1)OH (n(OH) = 8-16) at 298 K at the water/alkane vapor C(n)H(2n+2), (n(CH(3)) = 6-16) interface were calculated. The dependencies of enthalpy, entropy and Gibbs' energy of clusterization per one monomer molecule of 2D films on the alkyl chain length of corresponding alcohols and alkanes, the molar fraction of alkanes in the monolayers and the immersion degree of alcohol molecules into the water phase were shown to be linear or stepwise. The threshold of spontaneous clusterization of aliphatic alcohols at the water/alkane vapor interface was 10-11 carbon atoms at 298 K which is in line with experimental data at the air/water interface. It is shown that the presence of alkane vapor does not influence the process of alcohol monolayer formation. The structure of these monolayers is analogous to those obtained at the air/water interface in agreement with experimental data. The inclusion of alkane molecules into the amphiphilic monolayer at the water/alkane vapor interface is possible for amphiphiles with the spontaneous clusterization threshold at the air/water interface (n(s)(0)) of at least 16 methylene units in the alkyl chain, and it does not depend on the molar fraction of alkanes in the corresponding monolayer. The inclusion of alkanes from the vapor phase into the amphiphilic monolayer also requires that the difference between the alkyl chain lengths of alcohols and alkanes is not larger than n(s)(0) - 15 and n(s)(0) - 14 for the 2D film 1 and 2D film 2, respectively.

Preparation of microscopic and planar oil-water interfaces that are decorated with prescribed densities of insoluble amphiphiles

Langmuir monolayers (monolayers of insoluble molecules formed at the surface of water), and associated Langmuir-Blodgett/Schaefer monolayers prepared by transfer of Langmuir films to the surfaces of solids, are widely used in studies aimed at understanding the physicochemical properties of biological and synthetic molecules at interfaces. In this article, we report a general and facile procedure that permits transfer of Langmuir monolayers from the surface of water onto microscopic and planar interfaces between oil and aqueous phases. In these experiments, a metallic grid supported on a hydrophobic solid is used to form oil films with thicknesses of 20 mum and interfacial areas of 280 mum x 280 mum. Passage of the supported oil films through a Langmuir monolayer is shown to lead to quantitative transfer of insoluble amphiphiles onto the oil-water interfaces. The amphiphile-decorated oil-water interfaces hosted within the metallic grids (i) are approximately planar, (ii) are sufficiently robust mechanically so as to permit further characterization of the interfaces outside of the Langmuir trough, (iii) can be prepared with prescribed and well-defined densities of amphiphiles, and (iv) require only approximately 200 nL of oil to prepare. The utility of this method is illustrated for the case of the liquid crystalline oil 4-pentyl-4'-cyanobiphenyl (5CB). Transfer of monolayers of either dilauroyl- or dipalmitoylphosphatidylcholine (DLPC and DPPC, respectively) to the nematic 5CB-aqueous interface is demonstrated by epifluorescence imaging of fluorescently labeled lipid and polarized light imaging of the orientational order within the thin film of nematic 5CB. Interfaces prepared in this manner are used to reveal key differences between the density-dependent phase properties of DLPC and DPPC monolayers formed at air-water as compared to that of nematic 5CB-aqueous interfaces. The methodology described in this article should be broadly useful in advancing studies of the interfacial behavior of synthetic and biological molecules at liquid-liquid interfaces.

Structural study of the DNA dipalmitoylphosphatidylcholine complex at the air-water interface

We present here results that demonstrate the formation of a complex of DNA with zwitterionic dipalmitoylphosphatidylcholine (DPPC) monolayer at the air-water interface in the presence of Ca2+ ions; in particular, we show that the presence of Ca2+ cations is essential for the formation of the complex of DPPC with DNA. We characterize the resulting structure by X-ray reflectivity and by null-ellipsometry. We show that DNA maintains its native double helix form when attached to the zwitterionic lipid monolayer, at difference with the case of ammine containing monolayers. Our findings are discussed in view of other works that recently appeared on the interaction of DNA with zwitterionic phospholipids, emphasizing the role of DPPC as a potential vector for transfer of genetic material into mammalian cells by nonviral gene therapy and also suggesting Langmuir/Blodgett layers of zwitterionic phospoholipids as a method for nonconventional DNA immobilization.

Two-dimensional order in mammalian pre-ocular tear film

We report a grazing incidence x-ray diffraction (GIXD) investigation of the surface lipid layer of the pre-ocular tear film. For the first time we demonstrate the existence of 2D order over a wide range of surface pressures in this system, with typical spicing of 3.75A and 4.16A independent of the monolayer surface pressure. Analogous lipid ordering is also found in an artificial lipid mixture of the major lipid components of the tear film, suggesting that the 2D ordering is set by generic lipid-lipid interactions. Fluorescence microscopy of the natural and artificial tear film mixture reveals the co-existence of a dilute and a much more condensed phase in the amphiphilic lipid matrix over the pressure range of 15-45mN/m investigated by GIXD, plus an additional structure due to the much more hydrophobic part of the mixture. This evidence supports the previous hypothesis that tear film has a layered structure.

Fluidization of a dipalmitoyl phosphatidylcholine monolayer by fluorocarbon gases: potential use in lung surfactant therapy

Fluorocarbon gases (gFCs) were found to inhibit the liquid-expanded (LE)/liquid-condensed (LC) phase transition of dipalmitoyl phosphatidylcholine (DPPC) Langmuir monolayers. The formation of domains of an LC phase, which typically occurs in the LE/LC coexistence region upon compression of DPPC, is prevented when the atmosphere above the DPPC monolayer is saturated with a gFC. When contacted with gFC, the DPPC monolayer remains in the LE phase for surface pressures lower than 38 mN m(-1), as assessed by compression isotherms and fluorescence microscopy (FM). Moreover, gFCs can induce the dissolution of preexisting LC phase domains and facilitate the respreading of the DPPC molecules on the water surface, as shown by FM and grazing incidence x-ray diffraction. gFCs have thus a highly effective fluidizing effect on the DPPC monolayer. This gFC-induced fluidizing effect was compared with the fluidizing effect brought about by a mixture of unsaturated lipids and proteins, namely the two commercially available lung surfactant substitutes, Curosurf and Survanta, which are derived from porcine and bovine lung extracts, respectively. The candidate FCs were chosen among those already investigated for biomedical applications, and in particular for intravascular oxygen transport, i.e., perfluorooctyl bromide, perfluorooctylethane, bis(perfluorobutyl)ethene, perfluorodecalin, and perfluorooctane. The fluidizing effect is most effective with the linear FCs. This study suggests that FCs, whose biocompatibility is well documented, may be useful in lung surfactant substitute compositions.

Modifying calf lung surfactant by hexadecanol

Monolayer properties such as phase behavior, collapse pressure, and surface viscosity are determined by monolayer composition. Learning how to control these properties through simple additives is important to understanding lung surfactant monolayers and to designing optimal replacement surfactants for treatment of disease. The properties of Infasurf, a replacement lung surfactant derived from calf lung lavage organic extract, can be modified in a controlled fashion by adding hexadecanol (HD). Grazing incidence X-ray diffraction shows that the HD preferentially interacts with dipalmitoylphosphatidylcholine (DPPC), the main phospholipid component of Infasurf, in the same way as in binary mixtures of DPPC and HD. HD intercalates between the DPPC chains, which leads to a tighter packing of the two-dimensional lattice and greater stability of the solid phase. This molecular reorganization triggers changes at the macroscopic scale, leading to a greatly increased solid-phase fraction at a given surface pressure and order of magnitude increases in the surface shear viscosity. However, the collapse pressure decreases, and, hence, the minimum surface tension of the film increases.

More than a monolayer: relating lung surfactant structure and mechanics to composition

Survanta, a clinically used bovine lung surfactant extract, in contact with surfactant in the subphase, shows a coexistence of discrete monolayer islands of solid phase coexisting with continuous multilayer "reservoirs" of fluid phase adjacent to the air-water interface. Exchange between the monolayer, the multilayer reservoir, and the subphase determines surfactant mechanical properties such as the monolayer collapse pressure and surface viscosity by regulating solid-fluid coexistence. Grazing incidence x-ray diffraction shows that the solid phase domains consist of two-dimensional crystals similar to those formed by mixtures of dipalmitoylphosphatidylcholine and palmitic acid. The condensed domains grow as the surface pressure is increased until they coalesce, trapping protrusions of liquid matrix. At approximately 40 mN/m, a plateau exists in the isotherm at which the solid phase fraction increases from approximately 60 to 90%, at which the surface viscosity diverges. The viscosity is driven by the percolation of the solid phase domains, which depends on the solid phase area fraction of the monolayer. The high viscosity may lead to high monolayer collapse pressures, help prevent atelectasis, and minimize the flow of lung surfactant out of the alveoli due to surface tension gradients.

Intermolecular forces in spread phospholipid monolayers at oil/water interfaces

The lateral intermolecular forces between phospholipids are of particular relevance to the behavior of biomembranes, and have been approached via studies of monolayer isotherms at aqueous interfaces, mostly restricted to air/water (A/W) systems. For thermodynamic properties, the oil/water (O/W) interface has major advantages but is experimentally more difficult and less studied. A comprehensive reanalysis of the available thermodynamic data on spread monolayers of phosphatidyl cholines (PC) and phosphatidyl ethanolamines (PE) at O/W interfaces is conducted to identify the secure key features that will underpin further development of molecular models. Relevant recourse is made to isotherms of single-chain molecules and of mixed monolayers to identify the contributions of chain-chain interactions and interionic forces. The emphasis is on the properties of the phase transitions for a range of oil phases. Apparent published discrepancies in thermodynamic properties are resolved and substantial agreement emerges on the main features of these phospholipid monolayer systems. In compression to low areas, the forces between the zwitterions of like phospholipids are repulsive. The molecular model for phospholipid headgroup interactions developed by Stigter et al. accounts well for the virial coefficients in expanded phospholipid O/W monolayers. Inclusion of the changes in configuration and orientation of the zwitterion headgroups on compression, which are indicated by the surface potentials in the phase transition region, and inclusion of the energy of chain demixing from the oil phase will be required for molecular modeling of the phase transitions.

Scanning electrochemical microscopy (SECM) studies of oxygen transfer across phospholipid monolayers under surface pressure control: comparison of monolayers at air/water and oil/water interfaces

Scanning electrochemical microscopy has been used in combination with a specially designed Langmuir trough to compare the kinetics of oxygen transfer across an L-alpha-phosphatidylethanolamine, distearoyl monolayer spread at three different interfaces: air/water, air/water in contact with an oil lens, and oil/water. The monolayer is shown to reduce the kinetics of interfacial transport, and rate constants for the transport of oxygen across each interface, at different surface pressures, have been evaluated. The results obtained for each interface are compared, and the implications for studies of passive diffusion across cell membranes are discussed.

Novel methods for studying lipids and lipases and their mutual interaction at interfaces. Part II. Surface sensitive synchrotron X-ray scattering

Monolayers of lipids have been studied for more than a century. During the past decade new insight into the field has resulted from the development of surface sensitive X-ray scattering methods utilizing synchrotron radiation: grazing-incidence X-ray diffraction (GIXD) and specular X-ray reflectivity (XR). These novel methods provide direct microscopic information about the systems in question and allow in situ investigations under near physiological conditions. GIXD gives information about the in-plane molecular structure, e.g., lattice symmetry and structural parameters; XR provides the electron density profile across the interface. The present review describes the theory, experimental procedures and sample requirements for surface sensitive X-ray scattering. An overview of recent results is presented as well, with special emphasis on biologically important systems, e.g., investigations by GIXD and/or XR of lipid and protein structures at interfaces and of lipid/protein interactions.

Structure and bonding of molecules at aqueous surfaces

Significant advances toward understanding the structure of aqueous surfaces on a molecular level have been made in recent years. This review focuses on the recent contributions of surface vibrational sum frequency spectroscopy (VSFS) to this field of study. An overview of recent VSFS studies of the molecular structure and orientation of molecules at the vapor-water interface and the interface between water and an immiscible organic liquid is presented, with particular emphasis on studies that compare the molecular properties and adsorbate behavior at these two different but related interfaces. This discussion is preceded by a general introduction to VSFS studies at aqueous surfaces and a description of the fundamental principles underlying the technique.

X-ray diffraction and foam film investigations of PC head group interaction in water/ethanol mixtures

The influence of ethanol on single phospholipid monolayers at the water/air interface and in foam films has been investigated. Grazing incidence X-ray diffraction investigations (GIXD) of Langmuir monolayers from 1,2-distearoyl-phosphatidylcholine (DSPC) spread on water subphases with different amounts of ethanol were performed. The thickness and free specific energy of formation of foam films stabilized by 1,2-dimyristoyl-phosphatidylcholine (DMPC) at different concentrations of ethanol in the film forming dispersions were measured. The GIXD investigations show that the tilt angle of the alkyl chains in the PC lipid monolayer decreases with increasing concentration of ethanol caused by a decrease of the diameter of the head groups. With increasing ethanol content of the solution also the thickness of the aqueous core of PC lipid foam films decreases. We assume that ethanol causes a decreasing probability for the formation of hydrogen bonds of water molecules to the PC head groups. The distinct difference between the effects of ethanol on lipid bilayers as described in the literature and on monolayers and foam films found in this study is discussed. Whereas PC monolayers at the water/air interface become unstable above 25 vol.% ethanol, the PC foam films are stable up to 50 vol.% ethanol. This is related to the decrease of the surface excess energy per lipid molecule by the interaction between the two film surfaces.

X-ray and neutron surface scattering for studying lipid/polymer assemblies at the air-liquid and solid-liquid interfaces

Simple mono- and bilayers, built of amphiphilic molecules and prepared at air-liquid or solid-liquid interfaces, can be used as models to study such effects as water penetration, hydrocarbon chain packing, and structural changes due to head group modification. In the paper, we will discuss neutron and X-ray reflectometry and grazing incidence X-ray diffraction techniques used to explore structures of such ultra-thin organic films in different environments. We will illustrate the use of these methods to characterize the morphologies of the following systems: (i) polyethylene glycol-modified distearoylphosphatidylethanolamine monolayers at air-liquid and solid-liquid interfaces; and (ii) assemblies of branched polyethyleneimine polymer and dimyristoylphophatidylcholine lipid at solid-liquid interfaces.