Specific Adsorption of a Bisulfate Anion on a Pt(111) Electrode. Ultrahigh Vacuum Spectroscopic and Cyclic Voltammetric Study

Electrocatalysis: From Planar Surfaces to Nanostructured Interfaces

The reactions critical for the energy transition center on the chemistry of hydrogen, oxygen, carbon, and the heterogeneous catalyst surfaces that make up electrochemical energy conversion systems. Together, the surface-adsorbate interactions constitute the electrochemical interphase and define reaction kinetics of many clean energy technologies. Practical devices introduce high levels of complexity where surface roughness, structure, composition, and morphology combine with electrolyte, pH, diffusion, and system level limitations to challenge our ability to deconvolute underlying phenomena. To make significant strides in materials design, a structured approach based on well-defined surfaces is necessary to selectively control distinct parameters, while complexity is added sequentially through careful application of nanostructured surfaces. In this review, we cover advances made through this approach for key elements in the field, beginning with the simplest hydrogen oxidation and evolution reactions and concluding with more complex organic molecules. In each case, we offer a unique perspective on the contribution of well-defined systems to our understanding of electrochemical energy conversion technologies and how wider deployment can aid intelligent materials design.

Unraveling Molecular Fingerprints of Catalytic Sulfur Poisoning at the Nanometer Scale with Near-Field Infrared Spectroscopy

Fundamental understanding of catalytic deactivation phenomena such as sulfur poisoning occurring on metal/metal-oxide interfaces is essential for the development of high-performance heterogeneous catalysts with extended lifetimes. Unambiguous identification of catalytic poisoning species requires experimental methods simultaneously delivering accurate information regarding adsorption sites and adsorption geometries of adsorbates with nanometer-scale spatial resolution, as well as their detailed chemical structure and surface functional groups. However, to date, it has not been possible to study catalytic sulfur poisoning of metal/metal-oxide interfaces at the nanometer scale without sacrificing chemical definition. Here, we demonstrate that near-field nano-infrared spectroscopy can effectively identify the chemical nature, adsorption sites, and adsorption geometries of sulfur-based catalytic poisons on a Pd(nanodisk)/Al2O3 (thin-film) planar model catalyst surface at the nanometer scale. The current results reveal striking variations in the nature of sulfate species from one nanoparticle to another, vast alterations of sulfur poisoning on a single Pd nanoparticle as well as at the assortment of sulfate species at the active metal-metal-oxide support interfacial sites. These findings provide critical molecular-level insights crucial for the development of long-lifetime precious metal catalysts resistant toward deactivation by sulfur.

Real-time imaging of surface chemical reactions by electrochemical photothermal reflectance microscopy

Traditional electrochemical measurements based on either current or potential responses only present the average contribution of an entire electrode's surface. Here, we present an electrochemical photothermal reflectance microscope (EPRM) in which a potential-dependent nonlinear photothermal signal is exploited to map an electrochemical process with sub-micron spatial resolution. By using EPRM, we are able to monitor the photothermal signal of a Pt electrode during the electrochemical reaction at an imaging speed of 0.3 s per frame. The potential-dependent photothermal signal, which is sensitive to the free electron density, clearly revealed the evolution of surface species on the Pt surface. Our results agreed well with the reported spectroelectrochemical techniques under similar conditions but with a much faster imaging speed. We further mapped the potential oscillation during the oxidation of formic acid on the Pt surface. The photothermal images from the Pt electrode well matched the potential change. This technique opens new prospects for real-time imaging of surface chemical reaction to reveal the heterogeneity of electrochemical reactivity, which enables broad applications to the study of catalysis, energy storage, and light harvest systems.

The potential-dependent photothermal signal, which is sensitive to the free electron density, map the evolution of surface species on the electrode in real time.

In Situ Polymer Graphenization Ingrained with Nanoporosity in a Nitrogenous Electrocatalyst Boosting the Performance of Polymer-Electrolyte-Membrane Fuel Cells

Rich, porous graphene frameworks decorated with uniformly dispersed active sites are prepared by using polyaniline as a graphene precursor and introducing phenanthroline as a pore-forming agent. The unprecedented fuel-cell performance of this electrocatalyst is linked to the graphene frameworks with vast distribution of pore sizes, which maximizes the active-sites accessibility, facilitates mass-transport properties, and improves the carbon corrosion resistance.

Manganese oxide-induced strategy to high-performance iron/nitrogen/carbon electrocatalysts with highly exposed active sites

Iron/nitrogen/carbon (Fe/N/C) catalyst is so far the most promising non-precious metal electrocatalyst for oxygen reduction reaction (ORR) in acidic medium, whose performance depends closely on the synthesis chemistry. Herein, we report a MnOx-induced strategy to construct the Fe/N/C with highly exposed Fe-Nx active sites, which involves the uniform spreading of polyaniline on hierarchical N-doped carbon nanocages by a reactive-template polymerization, followed by the successive iron incorporation and polyaniline pyrolysis. The resulting Fe/N/C demonstrates an excellent ORR performance, including an onset potential of 0.92 V (vs. RHE), four electron selectivity, superb stability and immunity to methanol crossover. The excellent performance is well correlated with the greatly enhanced surface active sites of the catalyst stemming from the unique MnOx-induced strategy. This study provides an efficient approach for exploring the advanced ORR electrocatalysts by increasing the exposed active sites.

Remarkably Durable High Temperature Polymer Electrolyte Fuel Cell Based on Poly(vinylphosphonic acid)-doped Polybenzimidazole

Low durability of polymer electrolyte fuel cell (PEFC) is a major drawback that should be solved. Recent studies have revealed that leaching of liquid phosphoric acid (PA) from both polymer electrolyte membrane and catalyst layers causes inhomogeneous PA distribution that results in deterioration of PEFC performance during long-term operation. Here we describe the finding that a novel PEFC free from acid leaching shows remarkable high durability (single cell test: >400,000 cycling) together with a high power density at 120°C under a non-humidified condition. This is achieved by using a membrane electrode assembly (MEA) with Pt on poly(vinylphosphonic acid)-doped polybenzimidazole wrapped on carbon nanotube and poly(vinylphosphonic acid)-doped polybenzimidazole for the electrocatalst and electrolyte membrane, respectively. Such a high performance PEFC opens the door for the next-generation PEFC for “real world” use.

Products of SO2 adsorption on fuel cell electrocatalysts by combination of sulfur K-edge XANES and electrochemistry

Electrochemical adsorption of SO(2) on platinum is complicated by the change in sulfur oxidation state with potential. Here, we attempt to identify SO(2) adsorption products on catalyst coated membranes (CCMs) at different electrode potentials using a combination of in situ sulfur K-edge XANES (X-ray absorption near-edge structure) spectroscopy and electrochemical techniques. CCMs employed platinum nanoparticles supported on Vulcan carbon (Pt/VC). SO(2) was adsorbed from a SO(2)/N(2) gas mixture while holding the Pt/VC-electrode potential at 0.1, 0.5, 0.7, and 0.9 V vs a reversible hydrogen electrode (RHE). Sulfur adatoms (S(0)) are identified as the SO(2) adsorption products at 0.1 V, while mixtures of S(0), SO(2), and sulfate/bisulfate ((bi)sulfate) ions are suggested as SO(2) adsorption products at 0.5 and 0.7 V. At 0.9 V, SO(2) is completely oxidized to (bi)sulfate ions. The identity of adsorbed SO(2) species on Pt/VC catalysts at different electrode potentials is confirmed by modeling of XANES spectra using FEFF8 and a linear combination of experimental spectra from sulfur standards. Results on SO(2) speciation gained from XANES are used to compare platinum-sulfur electronic interactions for Pt(3)Co/VC versus Pt/VC catalysts in order to understand the difference between the two catalysts in terms of SO(2) contamination.

Quantitative SNIFTIRS studies of (bi)sulfate adsorption at the Pt(111) electrode surface

Subtractively normalized interfacial Fourier transform infrared reflection spectroscopy (SNIFTIRS) was applied to study (bi)sulfate adsorption on a Pt(111) surface in solutions of variable pH while maintaining a constant total bisulfate/sulfate ((bi)sulfate) concentration without the addition of an inert supporting electrolyte. The spectra were recorded for both the p- and s-polarizations of the IR radiation in order to differentiate between the IR bands of the (bi)sulfate species adsorbed on the electrode surface from those species located in the thin layer of electrolyte. The spectra recorded with p-polarized light consist of the IR bands from both the species adsorbed at the electrode surface and those present in the thin layer of electrolyte between the electrode surface and ZnSe window whereas the s-polarized spectra contain only the IR bands from the species located in the thin layer of electrolyte. A new procedure was developed to calculate the angle of incidence and thickness of the electrolyte between the Pt(111) electrode surface and the ZnSe IR transparent window. By combining these values with the knowledge of the optical constants for Pt, H(2)O and ZnSe, the mean square electric field strength (MSEFS) at the Pt(111) electrode surface and for thin layer of solution were accurately calculated. The spectra recorded using s-polarization were multiplied by the ratio of the average MSEFS for p- and s-polarizations and subtracted from the spectra recorded using p-polarization in order to remove the IR bands that arise from the species present within the thin layer cavity. In this manner, the resulting IR spectra contain only the IR bands for the anions adsorbed on the Pt(111) electrode surface. The spectra of adsorbed anions show little change with respect to the pH ranging from 1 to 5.6. This behavior indicates that the same species is predominantly adsorbed on the metal surface for this broad range of pH values and the results suggest that sulfate is the most likely candidate for this adsorbate.

Probe beam deflection studies of nanostructured catalyst materials for fuel cells

Probe beam deflection (PBD) techniques, both as cyclic voltadeflectometry (CVD) and chronodeflectometry (CD), were applied for the first time to the study of the electrochemistry of nanostructured Pt materials which are commonly used as electrocatalysts in fuel cells. The electrochemical surface reactions, including faradaic processes, double layer charging and specific anion adsorption were easily detected. Quantitative analysis of the chronodeflectometric data made possible to elucidate the dynamics of double layer charging in such materials and to determine the potential of zero charge (pzc) of the metal present either as a monolithic mesoporous material or as metal nanoparticles supported on carbon. The electro-oxidation of CO, adsorbed on nanostructured Pt, was also studied by CVD and CD being able to detect the formation of CO2 and H3O+ related with the nucleation and growth process which controls the rate of CO stripping. The interplay of Pt oxide formation and COad electrooxidation, both in potential and time, was detected indicating possible application of the technique to other electrocatalysts.

Infrared reflection absorption spectroscopy of the sulfuric acid anion adsorbed on Pd(S)-[n(111) x (111)] electrodes

Adsorption of the sulfuric acid anion (HSO4- or SO42-) has been studied on Pd(S)-[n(111) x (111)] electrodes (n = 2, 3, 5, 9, 20, infinity) using in situ infrared reflection absorption spectroscopy (IRAS). A single band is observed around 1200 cm(-1) on all the electrodes. The band is assigned to the SO stretching vibration of the sulfuric acid anion adsorbed with three- or onefold geometry. This result differs from the case of Pt-stepped surfaces on which two IRAS bands are observed around 1200 and 1100 cm(-1). The maximum coverage of the sulfuric acid anion is enhanced with the increase of the terrace width. The surfaces with n more than 3 have similar IRAS band shifts (dv/dE). Pd-stepped surfaces, for which the terrace is wide enough for the anion adsorption, adsorb the anion on the terrace rather than the step.