Why EXAFS Underestimated the Size of Small Supported MoS2 Particles

Experimental and computational studies of sulfided NiMo supported on pillared clay: catalyst activation and guaiacol adsorption sites

We report on intermediate (oxysulfides) and sulfided structures of NiMo supported on aluminium pillared clay (Al-PILC) during the catalyst activation process and the prefered guaiacol adsorption sites on the sulfided catalyst. In situ X-ray absorption fine structure (XAFS) together with density functional theory (DFT) calculations confirm the existence of ill-defined suboxides (MoO_x, NiO_x) and the well-known subsulfides (Mo₂S₉, Ni₃S₂) at the first stage which, at a later stage in the process, transform into MoS₂ with two edges, oxygen-decorated Mo and Ni with zero sulfur coverage. The freshly sulfided NiMoS₂ catalyst under sulfiding agents is mainly terminated by Mo-edge surface with 50% sulfur coverage (Mo-S50) with a disordered Ni-edge surface that can be assigned as NiMoS (1̄010). When exposed to an inert atmosphere such as He gas, the Mo and Ni edges evolved partially into new structures of Mo and Ni edges with zero sulfur coverage, labelled as Mo-Bare and Ni-Bare. Guaiacol is often used as a model compound for lignin and a series of calculations of guaiacol on the structural edges of a sulfided NiMoS₂ catalyst show relatively good agreement between the observed and calculated inelastic neutron scattering (INS) spectra for Mo-S50, Ni-Bare, and NiMoS (1̄010) where guaiacol weakly chemisorbed via oxygen atom of OH group. The results also confirm that guaiacol is physisorbed on the basal plane of NiMoS₂ in a horizontal (flat-lying) configuration via van der Waals interaction at a separation of about 3.25 Å.

Alumina-Supported NiMo Hydrotreating Catalysts-Aspects of 3D Structure, Synthesis, and Activity

Preparation conditions have a vital effect on the structure of alumina-supported hydrodesulfurization (HDS) catalysts. To explore this effect, we prepared two NiMoS/Al2O3 catalyst samples with the same target composition using different chemical sources and characterizing the oxidic NiMo precursors and sulfided and spent catalysts to understand the influence of catalyst structure on performance. The sample prepared from ammonium heptamolybdate and nickel nitrate (sample A) contains Mo in the oxidic precursor predominantly in tetrahedral coordination in the form of crystalline domains, which show low reducibility and strong metal-support interactions. This property influences the sulfidation process such that the sulfidation processes of Ni and Mo occur tendentially separately with a decreased efficiency to form active Ni-Mo-S particles. Moreover, inactive unsupported MoS2 particles or isolated NiS x species are formed, which are either washed off during catalytic reaction or aggregated to larger particles as seen in scanning transmission electron microscopy/energy-dispersive X-ray spectroscopy (STEM/EDX). The oxidic precursor of the sample synthesized using nickel carbonate and molybdenum trioxide as metal sources (sample B), however, contains Mo in octahedral coordination and shows higher reducibility of the metal species as well as weaker metal-support interactions than that of sample A; these properties allow an efficient sulfidation of Mo and Ni such that formation of active Ni-Mo-S particles is the main product. Ptychographic X-ray computed tomography (PXCT) and STEM and EDX measurements show that the structure formed during sulfidation is stable under operation conditions. The structural differences explain the HDS activity difference between these two samples and explain why sample B is much active than sample A.

Effective coordination numbers from EXAFS: general approaches for lanthanide and actinide dioxides

Extended X-ray absorption fine structure (EXAFS) is a comprehensive and usable method for characterizing the structures of various materials, including radioactive and nuclear materials. Unceasing discussions about the interpretation of EXAFS results for actinide nanoparticles (NPs) or colloids were still present during the last decade. In this study, new experimental data for PuO2 and CeO2 NPs with different average sizes were compared with published data on AnO2 NPs that highlight the best fit and interpretation of the structural data. In terms of the structure, PuO2, CeO2, ThO2, and UO2 NPs exhibit similar behaviors. Only ThO2 NPs have a more disordered and even partly amorphous structure, which results in EXAFS characteristics. The proposed new core-shell model for NPs with calculated effective coordination number perfectly fits the results of the variations in a metal-metal shell with a decrease in NP size.

Low-Temperature Synthesis Strategy for MoS2 Slabs Supported on TiO2(110)

MoS2 supported on oxides like TiO2 has a broad range of applications. The atomic structure of this system is therefore very useful to study. Previous research work in this area has made use of high-temperature synthesis methods, while the preparation of an MoS2/TiO2 in very important applications, such as catalysis, makes use of a low-temperature synthesis method. In this work, we investigate a low-temperature synthesis strategy for MoS2 slabs supported on rutile TiO2(110). Using scanning tunneling microscopy and X-ray photoelectron spectroscopy, we demonstrate that not only flat MoS2 slabs with irregular shapes but also MoSx stripes with a large number of coordinatively unsaturated Mo atoms are formed. In particular, it becomes evident that, for atomic structural characterization of MoS2/TiO2 and similar oxide-supported systems grown by low-temperature synthesis methods, the surface structure of the support becomes highly relevant.

Edge-Terminated MoS2 Nanoassembled Electrocatalyst via In Situ Hybridization with 3D Carbon Network

Transition metal dichalcogenides, especially MoS₂ , are considered as promising electrocatalysts for hydrogen evolution reaction (HER). Since the physicochemical properties of MoS₂ and electrode morphology are highly sensitive factor for HER performance, designed synthesis is highly pursued. Here, an in situ method to prepare a 3D carbon/MoS₂ hybrid catalyst, motivated by the graphene ribbon synthesis process, is reported. By rational design strategies, the hybrid electrocatalysts with cross-connected porous structure are obtained, and they show a high HER activity even comparable to the state-of-the-art MoS₂ catalyst without appreciable activity loss in long-term operations. Based on various physicochemical techniques, it is demonstrated that the synthetic procedure can effectively guide the formation of active site and 3D structure with a distinctive feature; increased exposure of active sites by decreased domain size and intrinsically high activity through controlling the number of stacking layers. Moreover, the importance of structural properties of the MoS₂ -based catalysts is verified by controlled experiments, validating the effectiveness of the designed synthesis approach.

Edge-exposed MoS2 nano-assembled structures as efficient electrocatalysts for hydrogen evolution reaction

Edge-exposed MoS2 nano-assembled structures are designed for high hydrogen evolution reaction activity and long term stability. The number of sulfur edge sites of nano-assembled spheres and sheets is confirmed by Raman spectroscopy and EXAFS analysis. By controlling the MoS2 morphology with the formation of nano-assembled spheres with the assembly of small-size fragments of MoS2, the resulting assembled spheres have high electrocatalytic HER activity and high thermodynamic stability.

Simultaneous tetralin HDA and dibenzothiophene HDS reactions on NiMo bulk sulphide catalysts obtained from mixed oxides

Large selectivity differences were found between supported and unsupported NiMoS catalysts in dibenzothiophene HDS and tetralin HDA.

XAFS study of starch-stabilized magnetite nanoparticles and surface speciation of arsenate

It has been shown that starch can effectively stabilize nanoscale magnetite particles, and starch-stabilized magnetite nanoparticles (SMNP) are promising for in situ remediation of arsenic-contaminated soils. However, a molecular level understanding has been lacking. Here, we carried out XAFS studies to bridge this knowledge gap. Fe K-edge XAFS spectra indicated that the Fe-O and Fe-Fe coordination numbers of SMNP were lower than those for bare magnetite particles, and these coordination numbers decreased with increasing starch concentration. The decrease in the average coordination number at elevated stabilizer concentration was attributed to the increase in the surface-to-volume ratio. Arsenic K-edge XAFS spectra indicated that adsorbed arsenate on SMNP consisted primarily of binuclear bidentate (BB) complexes and monodentate mononuclear (MM) complexes. More BB complexes (energetically more favorable) were observed at higher starch concentrations, indicating that SMNP not only offered greater adsorption surface area, but also stronger adsorption affinity toward arsenate.

How to find an optimum cluster size through topological site properties: MoSx model clusters

Computational investigations in catalysis frequently use model clusters to represent realistically the catalyst and its reaction sites. Detailed knowledge of the molecular charge, thus electronic density, of a cluster would then allow physical and chemical insights of properties and can provide a procedure to establish their optimum size for catalyst studies. For this purpose, an approach is suggested to study model clusters based on the distributed multipole analysis (DMA) of molecular charge properties. After full density functional theory (DFT) geometry optimization of each cluster, DMA computed from the converged DFT one-electron density matrix allowed the partition of the corresponding cluster charge distribution into monopole, dipole, and quadrupole moments on the atomic sites. The procedure was applied to MoS2 model clusters Mo10S18, Mo12S26, Mo16S32, Mo23S48, and Mo27S54. This analysis provided detailed features of the charge distribution of each cluster, focused on the 1010 (Mo or metallic edge) and 1010 (sulfur edge) active planes. Properties of the Mo27S54 cluster, including the formation of HDS active surfaces, were extensively discussed. The effect of cluster size on the site charge distribution properties of both planes was evaluated. The results showed that the Mo16S32 cluster can adequately model both active planes of real size Mo27S54. These results can guide future computational studies of MoS2 catalytic processes. Furthermore, this approach is of general applicability.

Cluster−Support Interactions and Morphology of MoS2 Nanoclusters in a Graphite-Supported Hydrotreating Model Catalyst

Supported MoS(2) nanoparticles constitute the active component of the important hydrotreating catalysts used for industrial upgrading and purification of the oil feedstock for the production of fossil fuels with a low environmental load. We have synthesized and studied a model system of the hydrotreating catalyst consisting of MoS(2) nanoclusters supported on a graphite surface in order to resolve a number of very fundamental questions related to the atomic-scale structure and morphology of the active clusters and in particular the effect of a substrate used in some types of hydrotreating catalysts. Scanning tunneling microscopy (STM) is used to image the atomic-scale structure of graphite-supported MoS(2) nanoclusters in real space. It is found that the pristine graphite (0001) surface does not support a high dispersion of MoS(2), but by introducing a small density of defects in the surface, highly dispersed MoS(2) nanoclusters could be synthesized on the graphite. From high-resolution STM images it is found that MoS(2) nanoclusters synthesized at low temperature in a sulfiding atmosphere preferentially grow as single-layer clusters, whereas clusters synthesized at 1200 K grow as multilayer slabs oriented with the MoS(2)(0001) basal plane parallel to the graphite surface. The morphology of both single-layer and multilayer MoS(2) nanoclusters is found to be preferentially hexagonal, and atom-resolved images of the top facet of the clusters provide new atomic-scale information on the MoS(2)-HOPG bonding. The structure of the two types of catalytically interesting edges terminating the hexagonal MoS(2) nanoclusters is also resolved in atomic detail in STM images, and from these images it is possible to reveal the atomic structure of both edges and the location and coverage of sulfur and hydrogen adsorbates.