Surface Plasmon Resonance of Au Colloid-Modified Au Films: Particle Size Dependence

An immunogold single extracellular vesicular RNA and protein (Au SERP) biochip to predict responses to immunotherapy in non-small cell lung cancer patients

Conventional PD‐L1 immunohistochemical tissue biopsies only predict 20%–40% of non‐small cell lung cancer (NSCLC) patients that will respond positively to anti‐PD‐1/PD‐L1 immunotherapy. Herein, we present an immunogold biochip to quantify single extracellular vesicular RNA and protein (^AuSERP) as a non‐invasive alternative. With only 20 μl of purified serum, PD‐1/PD‐L1 proteins on the surface of extracellular vesicles (EVs) and EV PD‐1/PD‐L1 messenger RNA (mRNA) cargo were detected at a single‐vesicle resolution and exceeded the sensitivities of their bulk‐analysis conventional counterparts, ELISA and qRT‐PCR, by 1000 times. By testing a cohort of 27 non‐responding and 27 responding NSCLC patients, ^AuSERP indicated that the single‐EV mRNA biomarkers surpass the single‐EV protein biomarkers in predicting patient responses to immunotherapy. Dual single‐EV PD‐1/PD‐L1 mRNA detection differentiated responders from non‐responders with an accuracy of 72.2% and achieved an NSCLC diagnosis accuracy of 93.2%, suggesting the potential for ^AuSERP to provide enhanced immunotherapy predictions and cancer diagnoses within the clinical setting.

Ultrasensitive detection of SARS-CoV-2 nucleocapsid protein using large gold nanoparticle-enhanced surface plasmon resonance

The COVID-19 pandemic has created urgent demand for rapid detection of the SARS-CoV-2 coronavirus. Herein, we report highly sensitive detection of SARS-CoV-2 nucleocapsid protein (N protein) using nanoparticle-enhanced surface plasmon resonance (SPR) techniques. A crucial plasmonic role in significantly enhancing the limit of detection (LOD) is revealed for exceptionally large gold nanoparticles (AuNPs) with diameters of hundreds of nm. SPR enhanced by these large nanoparticles lowered the LOD of SARS-CoV-2 N protein to 85 fM, resulting in the highest SPR detection sensitivity ever obtained for SARS-CoV-2 N protein.

Design and Application of Near-Infrared Nanomaterial-Liposome Hybrid Nanocarriers for Cancer Photothermal Therapy

Liposomes are attractive carriers for targeted and controlled drug delivery receiving increasing attention in cancer photothermal therapy. However, the field of creating near-infrared nanomaterial-liposome hybrid nanocarriers (NIRN-Lips) is relatively little understood. The hybrid nanocarriers combine the dual superiority of nanomaterials and liposomes, with more stable particles, enhanced photoluminescence, higher tumor permeability, better tumor-targeted drug delivery, stimulus-responsive drug release, and thus exhibiting better anti-tumor efficacy. Herein, this review covers the liposomes supported various types of near-infrared nanomaterials, including gold-based nanomaterials, carbon-based nanomaterials, and semiconductor quantum dots. Specifically, the NIRN-Lips are described in terms of their feature, synthesis, and drug-release mechanism. The design considerations of NIRN-Lips are highlighted. Further, we briefly introduced the photothermal conversion mechanism of NIRNs and the cell death mechanism induced by photothermal therapy. Subsequently, we provided a brief conclusion of NIRNs-Lips applied in cancer photothermal therapy. Finally, we discussed a synopsis of associated challenges and future perspectives for the applications of NIRN-Lips in cancer photothermal therapy.

Optimized 3D Finite-Difference-Time-Domain Algorithm to Model the Plasmonic Properties of Metal Nanoparticles with Near-Unity Accuracy

The finite difference time domain (FDTD) method is a grid-based, robust, and straightforward method to model the optical properties of metal nanoparticles (MNPs). Modelling accuracy and optical properties can be enhanced by increasing FDTD grid resolution; however, the resolution of the grid size is limited by the memory and computational requirements. In this paper, a 3D optimized FDTD (OFDTD) was designed and developed, which introduced new FDTD approximation terms based on the physical events occurring during the plasmonic oscillations in MNP. The proposed method not only required ~52% less memory than conventional FDTD, but also reduced the calculation requirements by ~9%. The 3D OFDTD method was used to model and obtain the extinction spectrum, localized surface plasmon resonance (LSPR) frequency, and the electric field enhancement factor (EF) for spherical silver nanoparticles (Ag NPs). The model’s predicted results were compared with traditional FDTD as well as experimental results to validate the model. The OFDTD results were found to be in excellent agreement with the experimental results. The EF accuracy was improved by 74% with respect to FDTD simulation, which helped reaching a near-unity OFDTD accuracy of ~99%. The λLSPR discrepancy reduced from 20 nm to 3 nm. The EF peak position discrepancy improved from ±5.5 nm to only ±0.5 nm.

Gold nanoparticle clusters for the investigation of therapeutic efficiency against prostate cancer under near-infrared irradiation

Gold particles have been widely used in the treatment of prostate cancer due to their unique optical properties, such as their light-heat conversion in response to near-infrared radiation. Due to well-defined synthesis mechanisms and simple manufacturing methods, gold particles have been fabricated in various sizes and shapes. However, the low photothermal transduction efficiency in their present form is a major obstacle to practical and therapeutic uses of these particles. In the current work, we present a silica-coated gold nanoparticle cluster to address the therapeutic limit of single gold nanoparticles (AuNPs) and use its photothermal effect for treatment against PC-3, a typical prostate cancer. Due to its specific nanostructure, this gold nanocluster showed three times higher photothermal transduction efficiency than free single AuNPs. Moreover, while free single particles easily clump and lose optical properties, this silica-coated cluster form remained stable for a longer time in a given medium. In photothermal tests under near-infrared radiation, the excellent therapeutic efficacy of gold nanoclusters, referred to as AuNC@SiO2, was observed in a preclinical sample. Only the samples with both injected nanoclusters followed by photothermal treatment showed completely degraded tumors after 15 days. Due to the unique intrinsic biocompatibility and higher therapeutic effect of these silica-coated gold nanoclusters, they may contribute to enhancement of therapeutic efficacy against prostate cancer.

Plasmonics of Diffused Silver Nanoparticles in Silver/Nitride Optical Thin Films

Metal-dielectric multilayers are versatile optical devices that can be designed to combine the visible transmittance of dielectrics with the electronic properties of metals for plasmonic and meta-material applications. However, their performances are limited by an interfacial optical absorption often attributed entirely to the metal surface roughness. Here, we show that during deposition of AlN/Ag/AlN and SiNx/Ag/SiNx multilayers, significant diffusion of Ag into the top dielectric layer form Ag nanoparticles which excite localized surface plasmon resonances that are primarily responsible for the interfacial optical absorption. Based on experimental depth profiles, we model the multilayer's silver concentration profile as two complementary error functions: one for the diffused Ag nanoparticles and one for the interface roughness. We apply the Maxwell-Garnett and Bruggeman effective medium theories to determine that diffusion characteristics dominate the experimental absorption spectra. The newfound metal nanoparticle diffusion phenomenon effectively creates a hybrid structure characteristic of both metal-dielectric multilayer and metal-dielectric composite.

Membrane Surface-Enhanced Raman Spectroscopy for Cholesterol-Modified Lipid Systems: Effect of Gold Nanoparticle Size

A gold nanoparticle (AuNP) has a localized surface plasmon resonance peak depending on its size, which is often utilized for surface-enhanced Raman scattering (SERS). To obtain information on the cholesterol (Chol)-incorporated lipid membranes by SERS, AuNPs (5, 100 nm) were first functionalized by 1-octanethiol and then modified by lipids (AuNP@lipid). In membrane surface-enhanced Raman spectroscopy (MSERS), both signals from 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and Chol molecules were enhanced, depending on preparation conditions (size of AuNPs and lipid/AuNP ratio). The enhancement factors (EFs) were calculated to estimate the efficiency of AuNPs on Raman enhancement. The size of AuNP_100nm@lipid was 152.0 ± 12.8 nm, which showed an surface enhancement Raman spectrum with an EF₂₈₅₀ value of 111 ± 9. The size of AuNP_5nm@lipid prepared with a lipid/AuNP ratio of 1.38 × 10⁴ (lipid molecule/particle) was 275.3 ± 20.2 nm, which showed the highest enhancement with an EF₂₈₅₀ value of 131 ± 21. On the basis of fluorescent probe analyses, the membrane fluidity and polarity of AuNP@lipid were almost similar to DOPC/Chol liposome, indicating an intact membrane of DOPC/Chol after modification with AuNPs. Finally, the membrane properties of AuNP@lipid systems were also discussed on the basis of the obtained MSERS signals.

Development of a Gold Nanoparticle-Functionalized Surface Plasmon Resonance Assay for the Sensitive Detection of Monoclonal Antibodies and Its Application in Pharmacokinetics

As a prominent human therapeutic, therapeutic monoclonal antibodies (mAbs) have attracted increasing attention in the past decade due to their high-targeting specificity, low toxicity, and prolonged efficacy. Systematic pharmacokinetic analysis of mAbs not only largely facilitates the understanding of their biologic functions but also promotes the development of therapeutic drug discovery, early clinical trial implementation, and therapeutic monitoring. However, the extremely complex nature of biomatrices and the especially low dosages of mAbs make their detection in biomatrices and further pharmacokinetic analysis highly challenging. Therefore, a method capable of reliably, quickly, and sensitively quantifying mAbs in biomatrices is urgently needed. In this work, we developed and evaluated an gold nanoparticle-functionalized surface plasmon resonance assay for cetuximab (C225) detection and pharmacokinetic analysis in rhesus monkeys. Combining its advantages of label-free pretreatment and amplified signal response, the lower limit of quantitation of C225 in monkey serum was reduced to 0.0125 μg/ml, and the linear range had an order of magnitude comparable to that of an ELISA-based method. Furthermore, the pharmacokinetics of C225 in rhesus monkeys was studied after intravenous infusions of single doses at 7.5, 24, and 75 mg/kg. The concentration of C225 in monkey serum was detectable after dosing for 720 hours. We believe that this new strategy will be applicable as a general protocol for mAb quantification, pharmacokinetic characteristic determination, and toxicokinetic analysis during drug development.

Two-color surface plasmon resonance nanosizer for gold nanoparticles

We study the potentialities of a two-color Surface Plasmon Resonance (SPR) spectroscopy nanosizer by monitoring the assembling of a colloidal dispersion of citrate stabilized gold nanoparticles (AuNPs) on SiO₂ surface. When the AuNPs/water composite's optical density layer is negligible and the electron mean-free path limitation is taken into account in the AuNPs' dielectric constant;s formulation, the surface density σ of the nanoparticle array and the statistical mean size <r> of the nanoparticles can be straightly determined by using two-color SPR spectroscopy in the context of Maxwell's Garnett theory. The optical method, demonstrated experimentally for AuNPs with a nominal mean diameter of 15 nm, can, theoretically, be extended to bigger nanoparticles, based on a simple scaling relation between the extinction cross section of the single nanoparticle σ_ext and the surface density σ. The experimental results, comparable to those obtained by AFM, transmission electron microscopy and dynamic light scattering technique, establish a novel insight on the SPR spectroscopy's potential to accurately characterize nanomaterials.

Hybridization conditions of oligonucleotide-capped gold nanoparticles for SPR sensing of microRNA

MicroRNA (miRNA) sensing, especially the miRNA-200 family, is increasingly targeted for cancer diagnostics. As the sensing schemes often rely on nanoparticles functionalized with a specific oligonucleotide, we investigate the hydribization conditions using the common case of surface plasmon resonance (SPR) sensing of miRNA and a gold nanoparticle (Au NP) competitor. In this type of assays, the Au NPs compete with the microRNA to bind the capture probe immobilized on the gold surface. In our study, we simplify and improve the detection procedure by adopting 11-mercaptoundecanoic acid (11-MUA) as linker to the gold surface, not only omitting the blocking step of 6-mercapto-1-hexanol (MCH), but also increasing the probe density. We report that the response in our SPR sensing studies increased with the size of Au NPs according to the plasmon ruler equation, but the larger AuNPs of 32 nm lacked colloidal stability. In addition, decreasing the ratio of oligonucleotide to Au NPs and the addition of polyethylene glycol (PEG) to hybridization buffer also favored a better response in SPR sensing of miRNA. The optimization led to an improved detection sensitivity in our competition method and a detection limit as low as 500 pM for miRNA-200b without amplification of miRNA and use of other amplification schemes.

The effect of sulfate pre-treatment to improve the deposition of Au-nanoparticles in a gold-modified sulfated g-C3N4 plasmonic photocatalyst towards visible light induced water reduction reaction

In continuation of our earlier work on Au-g-C₃N₄ and to improve its activity further, Au incorporated sulfated carbon nitride (g-C₃N₄) has been designed by using a simple impregnation cum borohydrate reduction method for the visible light induced water reduction reaction for hydrogen generation. The photocatalysts were characterized using various instrumental methods such as PXRD, UV-Vis DRS, SEM, HR-TEM, XPS, PL and TRPL spectral analysis. Functionalisation by the -HSO₃ group and incorporation of AuNPs in the g-C₃N₄ skeleton lead to the extension of its pi-conjugated system, modification of its semiconductor properties, such as band structure engineering with a tunable bandgap, red-shift of the optical absorption band and promotion of charge migration and separation. The sulfate pre-treated g-C₃N₄ samples are supposed to have a defected surface due to oxygen vacancies, which increases the adsorption of AuNPs onto the vacant oxygen sites. Thus the AuNPs get adsorbed on the reduced surfaces, increasing the extent and effectiveness of the electronic communication between gold and the g-C₃N₄ interface. The improved photocatalytic activity could be attributed to the surface plasmon resonance (SPR) effect of AuNPs, which synergistically facilitates the photocatalysis process. The photocatalytic activity of Au-sulfated g-C₃N₄ for photocatalytic splitting of water to produce H₂ was increased 1.5 times compared to that of Au-g-C₃N₄, 2.5 times compared to that of sulphated-g-C₃N₄ and 35 times compared to that of single-phase g-C₃N₄.

Determining Number Concentrations and Diameters of Polystyrene Particles by Measuring the Effective Refractive Index of Colloids Using Surface Plasmon Resonance

The capabilities of surface plasmon resonance (SPR) for characterization of colloidal particles were evaluated for 100, 300, and 460 nm nominal diameter polystyrene (PS) latexes. First the accuracy of measuring the effective refractive index (n_eff) of turbid colloids using SPR was quantified. It was concluded that for submicrometer sized PS particles the accuracy is limited by the reproducibility between replicate injections of samples. An SPR method was developed for obtaining the particle mean diameter (d_part) and the particle number concentration (c_p) by fitting the measured n_eff of polystyrene (PS) colloids diluted in series with theoretical values calculated using the coherent scattering theory (CST). The d_part and c_p determined using SPR agreed with reference values obtained from size distributions measured by scanning electron microscopy (SEM), and the mass concentrations stated by the manufacturer. The 100 nm particles adsorbed on the sensing surface, which hampered the analysis. Once the adsorption problem has been overcome, the developed SPR method has potential to become a versatile tool for characterization of colloidal particles. In particular, SPR could form the basis of rapid and accurate methods for measuring the c_p of submicrometer particles in dispersion.

Surface Plasmon-Coupled Directional Enhanced Raman Scattering by Means of the Reverse Kretschmann Configuration

Surface-enhanced Raman scattering (SERS) is a unique analytical technique that provides fingerprint spectra, yet facing the obstacle of low collection efficiency. In this study, we demonstrated a simple approach to measure surface plasmon-coupled directional enhanced Raman scattering by means of the reverse Kretschmann configuration (RK-SPCR). Highly directional and p-polarized Raman scattering of 4-aminothiophenol (4-ATP) was observed on a nanoparticle-on-film substrate at 46° through the prism coupler with a sharp angle distribution (full width at half-maximum of ∼3.3°). Because of the improved collection efficiency, the Raman scattering signal was enhanced 30-fold over the conventional SERS mode; this was consistent with finite-difference time-domain simulations. The effect of nanoparticles on the coupling efficiency of propagated surface plasmons was investigated. Possessing straightforward implementation and directional enhancement of Raman scattering, RK-SPCR is anticipated to simplify SERS instruments and to be broadly applicable to biochemical assays.

Surface plasmon resonance: a versatile technique for biosensor applications

Surface plasmon resonance (SPR) is a label-free detection method which has emerged during the last two decades as a suitable and reliable platform in clinical analysis for biomolecular interactions. The technique makes it possible to measure interactions in real-time with high sensitivity and without the need of labels. This review article discusses a wide range of applications in optical-based sensors using either surface plasmon resonance (SPR) or surface plasmon resonance imaging (SPRI). Here we summarize the principles, provide examples, and illustrate the utility of SPR and SPRI through example applications from the biomedical, proteomics, genomics and bioengineering fields. In addition, SPR signal amplification strategies and surface functionalization are covered in the review.

Fragmentation of supported gold nanoparticles@agarose film by thiols and the role of their synergy in efficient catalysis

A non-conventional fragmentation of supported gold nanoparticles@agarose film by thiols through a prompt electron transfer is demonstrated. The film also shows catalysis of p-nitrophenol reduction in only ∼20 to 30 s.

Nanomaterials enhanced surface plasmon resonance for biological and chemical sensing applications

The main challenge for all electrical, mechanical and optical sensors is to detect low molecular weight (less than 400 Da) chemical and biological analytes under extremely dilute conditions. Surface plasmon resonance sensors are the most commonly used optical sensors due to their unique ability for real-time monitoring the molecular binding events. However, their sensitivities are insufficient to detect trace amounts of small molecular weight molecules such as cancer biomarkers, hormones, antibiotics, insecticides, and explosive materials which are respectively important for early-stage disease diagnosis, food quality control, environmental monitoring, and homeland security protection. With the rapid development of nanotechnology in the past few years, nanomaterials-enhanced surface plasmon resonance sensors have been developed and used as effective tools to sense hard-to-detect molecules within the concentration range between pmol and amol. In this review article, we reviewed and discussed the latest trend and challenges in engineering and applications of nanomaterials-enhanced surface plasmon resonance sensors (e.g., metallic nanoparticles, magnetic nanoparticles, carbon-based nanomaterials, latex nanoparticles and liposome nanoparticles) for detecting "hard-to-identify" biological and chemical analytes. Such information will be viable in terms of providing a useful platform for designing future ultrasensitive plasmonic nanosensors.

Configuration-controlled Au nanocluster arrays on inverse micelle nano-patterns: versatile platforms for SERS and SPR sensors

Nanopatterned 2-dimensional Au nanocluster arrays with controlled configuration are fabricated onto reconstructed nanoporous poly(styrene-block-vinylpyridine) inverse micelle monolayer films. Near-field coupling of localized surface plasmons is studied and compared for disordered and ordered core-centered Au NC arrays. Differences in evolution of the absorption band and field enhancement upon Au nanoparticle adsorption are shown. The experimental results are found to be in good agreement with theoretical studies based on the finite-difference time-domain method and rigorous coupled-wave analysis. The realized Au nanopatterns are exploited as substrates for surface-enhanced Raman scattering and integrated into Kretschmann-type SPR sensors, based on which unprecedented SPR-coupling-type sensors are demonstrated.

Enhancing on-surface mismatch discrimination capability of PNA probes by AuNP modification of gold(111) surface

Unambiguous identification of single base mismatches in nucleic acid sequences is of great importance in nucleic acid detection assays. However, ambiguities are often encountered with, and therefore, a strategy for attaining substantially large enhancement of mismatch discrimination has been worked upon in this study. Short single-stranded peptide nucleic acid (PNA) and deoxyribonucleic acid (DNA) sensor probes that are immobilized onto gold nanoparticle (AuNP) modified Au(111) surface have been applied for target DNA detection. It will be shown that while both PNA and the analogous DNA probes exhibit generally better target detection abilities on the AuNP-modified Au(111) surface (elicited from fluorescence-based measurement of on-surface Tm values), compared to the bare Au(111) surface, PNA supersedes DNA, for all sizes of AuNPs (10, 50, and 90 nm) applied, with the difference being quite drastic in the case of the smallest 10 nm AuNP. It is found that while the AuNP curvature plays a pivotal role in target detection abilities of the PNA probes, the changes in the surface roughness caused by AuNP treatment do not exert any significant influence. This study also presents a means for preparing PNA-AuNP hybrids without altering PNA functionality and without AuNP aggregation by working with the surface-affixed AuNPs.

Raman scattering characterization of 1,4-phenylenediisocyanide in Au-Au and Ag-Au nanogaps

A nanogap formed by a metal nanoparticle and a flat metal substrate is one kind of "hot site" for surface-enhanced Raman scattering (SERS). In this sense, the characteristics of 1,4-phenylenediisocyanide (1,4-PDI) trapped in a nanogap formed by a flat Au or Ag substrate and 60 nm-sized Au or Ag nanoparticles have been examined by means of Raman scattering spectroscopy. It is noteworthy that the NC stretching band of 1,4-PDI is very susceptible to the measurement condition. The NC stretching band is observed at 2177, 2173, and 2174 cm(-1) when 1,4-PDI is trapped in the Au-Au, Ag-Au, and Au-Ag nanogaps, respectively, but the corresponding peak shifts linearly with a slope of as much as 22.4, 28.5, and 31.2 cm(-1)V(-1), respectively, in the electrochemical environment. On the other hand, the NC stretching peak is found to blue-shift by up to 8, 3, and 5 cm(-1), respectively, when the Au-Au, Ag-Au, and Au-Ag nanogaps are exposed to acetic acid. In contrast, in the presence of ammonia, the NC stretching peak is red-shifted by up to 9, 4, and 5 cm(-1), respectively. This can be understood by presuming that acetic acid acts as an electron acceptor, while ammonia acts as an electron donor when these volatile organics interact with Au or Ag, thereby resulting in either the increase or the decrease in the surface potential of the nanogap electrodes.

Surface plasmon resonance based biosensor technique: a review

Optical Surface plasmon resonance (SPR) biosensors represent the most advanced and developed optical label-free biosensor technology. Optical SPR biosensors are a powerful detection and analysis tool that has vast applications in environmental protection, biotechnology, medical diagnostics, drug screening, food safety and security. This article reviews the recent development of SPR biosensor techniques, including bulk SPR and localized SPR (LSPR) biosensors, for detecting interactions between an analyte of interest in solution and a biomolecular recognition. The concepts of bulk and localized SPs and the working principles of both sensing techniques are introduced. Major sensing advances on biorecognition elements, measurement formats, and sensing platforms are presented. Finally, the discussions on both biosensor techniques as well as comparison of both SPR sensing techniques are made.

Surface plasmon resonance biosensors incorporating gold nanoparticles

SPR biosensing is increasingly popular for the detection of a multitude of biomolecules. It offers label-free detection and study of proteins, nucleic acids, and other biomolecules in real time. A recent trend involves incorporation of AuNPs, either within the sensing surface itself or as signal enhancing tagging molecules. The importance of AuNP and detecting agent spacing is described and techniques using macromolecular spacing aids are highlighted. Recent methods to enhance SPR detection capabilities using gold nanoparticles are reviewed, as well as device fabrication and the results of incorporation. SPR detection is a highly versatile method for the detection of biomolecules and, with the incorporation of AuNPs, shows promise in extending it to a number of new applications.

PHYSICAL AND CHEMICAL NANOLITHOGRAPHY TECHNIQUES: CHALLENGES AND PROSPECTS

The fabrication of nanodevices and nanosystems having dimensions smaller than 100 nm requires the ability to produce, control, manipulate, and modify structures at the nanometer scale. Physical and chemical nanolithography techniques have been demonstrated to be promising because of the low cost and high throughput. Although the physical and chemical nanolithography techniques can pattern small features on single chips or across an entire wafer, there are considerable challenges when dealing with complex nanostructures, alignment and multilevel stacks. In this paper, the problems are reviewed and potential solutions suggested.

Rheological and dielectric properties of different gold nanoparticle sizes

Background

Gold nanoparticles (GNPs) have found themselves useful for diagnostic, drug delivery and biomedicine applications, but one of the important concerns is about their safety in clinical applications. Nanoparticle size has been shown to be an extremely important parameter affecting the nanoparticle uptake and cellular internalization. The rheological properties assume to be very important as it affects the pressure drop and hence the pumping power when nano-fluids are circulated in a closed loop. The rheological and dielectric properties have not been documented and identified before. The aim of the present study was to investigate the rheology and the dielectric properties of different GNPs sizes in aqueous solution.

Methods

10, 20 and 50 nm GNPs (Product MKN-Au, CANADA) was used in this study. The rheological parameters were viscosity, torque, shear stress, shear rate, plastic viscosity, yield stress, consistency index, and activation energy. These rheological parameters were measured using Brookfield LVDV-III Programmable rheometer supplied with temperature bath and controlled by a computer.

Results

The shear stress and shear rate of GNPs have shown a linear relationship and GNPs exhibited Newtonian behaviour. The GNPs with larger particle size (50 nm) exhibited more viscosity than those with smaller particle sizes (10 and 20 nm). Viscosity decreased with increasing the temperature for all the examined GNP sizes. The flow behaviour index (n) values were nearly ≤ 1 for all examined GNP sizes. Dielectric data indicated that the GNPs have strong dielectric dispersion in the frequency range of 20-100 kHz. The conductivity and relaxation time decreased with increasing the GNP size.

Conclusions

This study indicates that the GNP size has considerable influence on the viscosity of GNPs. The strong dielectric dispersion was GNP size dependent. The decrease in relaxation time might be attributed to increase in the localized charges distribution within the medium confirmed by the conductivity data. This study suggests that further experiments are required to be done after the administration of GNPs through different routes in rats in vivo.

Halogen-bonding mediated stepwise assembly of gold nanoparticles onto planar surfaces

In this study halogen bonding (XB) is used as the driving force for the noncovalent assembly of gold nanoparticles (AuNPs) on silicon and quartz substrates functionalized with organic monolayers. The AuNPs are functionalized with XB-donor ligands, whereas the monolayers have pyridine groups as XB-acceptors. The surface-confined systems are formed by iteratively exposing the monolayers to solutions of organic cross-linkers having 2-4 pyridine groups and functionalized AuNPs. UV-vis spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM) reveal how the structure of the resulting surface-bound assemblies are controlled by (i) the properties of the monolayers, (ii) the molecular structure and the number of XB binding sites of the organic cross-linker, and (iii) the number of functionalized AuNP and cross-linker deposition steps. Moreover, these structures exhibit surface-enhanced Raman scattering and significant changes are observed in the morphology of some of the surface-bound assemblies upon aging.

Mode-specific directional emission from hybridized particle-on-a-film plasmons

We investigate the electromagnetic interaction between a gold nanoparticle and a thin gold film on a glass substrate. The coupling between the particle plasmons and the surface plasmon polaritons of the film leads to the formation of two localized hybrid modes, one low-energy "film-like" plasmon and one high-energy plasmon dominated by the nanoparticle. We find that the two modes have completely different directional scattering patterns on the glass side of the film. The high-energy mode displays a characteristic dipole emission pattern while the low-energy mode sends out a substantial part of its radiation in directions parallel to the particle dipole moment. The relative strength of the two radiation patterns vary strongly with the distance between the particle and the film, as determined by the degree of particle-film hybridization.

Micro-array versus nano-array platforms: a comparative study for ODN detection based on SPR enhanced ellipsometry

The rapid and sensitive detection of DNA has recently attracted worldwide attention for a variety of disease diagnoses and detection of harmful bacteria in food and drink. In this paper, we carried out a comparative study based on surface plasmon resonance enhanced ellipsometry (SPREE) for the detection of oligodeoxynucleotides (ODNs) using micro- and nano-array platforms. The micro-arrayed surfaces were fabricated by a photolithography approach using different types of mask having varying size and shape. Well-ordered arrays of high aspect ratio polymeric nanotubes were also obtained using high molecular weight polystyrene (PS) and anodic aluminum oxide (AAO) membranes having 200 nm pore diameters. The SPREE sensors were then prepared by direct coupling of thiolated probe-ODNs, which contain suitable spacer arms, on gold-coated micro- and nano-arrayed surfaces. We experimentally demonstrated that, for the first time, gold-coated free standing polymeric nano-arrayed platforms can easily be produced and lead to a significant sensor sensitivity gain compared to that of the conventional SPREE surfaces of about four times. We believe that such an enhancement in sensor response could be useful for next generation sensor systems.

Fe3O4 nanoparticles-enhanced SPR sensing for ultrasensitive sandwich bio-assay

Magnetic nanoparticles (MNPs) have been receiving increasing attention because of its great potentials in bioseparation. However, the separation products are difficult to be detected by general method due to their extremely small size. Here, we demonstrate that MNPs can greatly enhance the signal of surface plasmon resonance spectroscopy (SPR). Features of MNPs-aptamer conjugates as a powerful amplification reagent for ultrasensitive immunoassay are reported in this work for the first time. In order to evaluate the sensing ability of MNPs-aptamer conjugates as an amplification reagent, a sandwich SPR sensor is constructed by using thrombin as model analyte. Thrombin, captured by immobilized anti-thrombin aptamer on SPR gold film, is sensitively detected by SPR spectroscopy with a lowest detection limit of 0.017 nM after MNPs-aptamer conjugates is used as amplification reagent. At the same time, the excellent selectivity of the present biosensor is also confirmed by using three kinds of proteins (BSA, human IgM and human IgE) as controls. These results confirm that MNPs is a powerful sandwich element and an excellent amplification reagent for SPR based sandwich immunoassay and SPR has a great potential for the detection of MNPs-based bioseparation products.

Magnetic nanoparticle enhanced surface plasmon resonance sensing and its application for the ultrasensitive detection of magnetic nanoparticle-enriched small molecules

Magnetic nanoparticles (MNPs) have been frequently used in bioseparation, but their applicability in bioassays is limited due to their extremely small size so that sensitive detection is difficult to achieve using a general technique. Here, we present an amplification technique using MNPs for an enhanced surface plasmon resonance (SPR) bioassay. The amplification effect of carboxyl group modified Fe(3)O(4) MNPs of two sizes on SPR spectroscopy is first demonstrated by assembling MNPs on amino group modified SPR gold substrate. To further evaluate the feasibility of the use of Fe(3)O(4) MNPs in enhancing a SPR bioassay, a novel SPR sensor based on an indirect competitive inhibition assay (ICIA) is developed for detecting adenosine by employing Fe(3)O(4) MNP-antiadenosine aptamer conjugates as the amplification reagent. The results confirm that Fe(3)O(4) MNPs can be used as a powerful amplification agent to provide a sensitive approach to detect adenosine by SPR within the range of 10-10,000 nM, which is much superior to the detection result obtained by a general SPR sensor. Importantly, the present detection methodology could be easily extended to detect other biomolecules of interest by changing the corresponding aptamer in Fe(3)O(4) MNP-aptamer conjugates. This novel technique not only explores the possibility of the use of SPR spectroscopy in a highly sensitive detection of an MNP-based separation product but also offers a new direction in the use of Fe(3)O(4) MNPs as an amplification agent to design high performance SPR biosensors.

Small molecule immunosensing using surface plasmon resonance

Surface plasmon resonance (SPR) biosensors utilize refractive index changes to sensitively detect mass changes at noble metal sensor surface interfaces. As such, they have been extensively applied to immunoassays of large molecules, where their high mass and use of sandwich immunoassay formats can result in excellent sensitivity. Small molecule immunosensing using SPR is more challenging. It requires antibodies or high-mass or noble metal labels to provide the required signal for ultrasensitive assays. Also, it can suffer from steric hindrance between the small antigen and large antibodies. However, new studies are increasingly meeting these and other challenges to offer highly sensitive small molecule immunosensor technologies through careful consideration of sensor interface design and signal enhancement. This review examines the application of SPR transduction technologies to small molecule immunoassays directed to different classes of small molecule antigens, including the steroid hormones, toxins, drugs and explosives residues. Also considered are the matrix effects resulting from measurement in chemically complex samples, the construction of stable sensor surfaces and the development of multiplexed assays capable of detecting several compounds at once. Assay design approaches are discussed and related to the sensitivities obtained.