Long-Range Interaction Forces between Polymer-Supported Lipid Bilayer Membranes

Tunable cell-surface mimetics as engineered cell substrates

Most recent breakthroughs in understanding cell adhesion, cell migration, and cellular mechanosensitivity have been made possible by the development of engineered cell substrates of well-defined surface properties. Traditionally, these substrates mimic the extracellular matrix (ECM) environment by the use of ligand-functionalized polymeric gels of adjustable stiffness. However, such ECM mimetics are limited in their ability to replicate the rich dynamics found at cell-cell contacts. This review focuses on the application of cell surface mimetics, which are better suited for the analysis of cell adhesion, cell migration, and cellular mechanosensitivity across cell-cell interfaces. Functionalized supported lipid bilayer systems were first introduced as biomembrane-mimicking substrates to study processes of adhesion maturation during adhesion of functionalized vesicles (cell-free assay) and plated cells. However, while able to capture adhesion processes, the fluid lipid bilayer of such a relatively simple planar model membrane prevents adhering cells from transducing contractile forces to the underlying solid, making studies of cell migration and cellular mechanosensitivity largely impractical. Therefore, the main focus of this review is on polymer-tethered lipid bilayer architectures as biomembrane-mimicking cell substrate. Unlike supported lipid bilayers, these polymer-lipid composite materials enable the free assembly of linkers into linker clusters at cellular contacts without hindering cell spreading and migration and allow the controlled regulation of mechanical properties, enabling studies of cellular mechanosensitivity. The various polymer-tethered lipid bilayer architectures and their complementary properties as cell substrates are discussed.

Supported lipid bilayer platforms to probe cell mechanobiology

Mammalian and bacterial cells sense and exert mechanical forces through the process of mechanotransduction, which interconverts biochemical and physical signals. This is especially important in contact-dependent signaling, where ligand-receptor binding occurs at cell-cell or cell-ECM junctions. By virtue of occurring within these specialized junctions, receptors engaged in contact-dependent signaling undergo oligomerization and coupling with the cytoskeleton as part of their signaling mechanisms. While our ability to measure and map biochemical signaling within cell junctions has advanced over the past decades, physical cues remain difficult to map in space and time. Recently, supported lipid bilayer (SLB) technologies have emerged as a flexible platform to mimic and perturb cell-cell and cell-ECM junctions, allowing one to study membrane receptor mechanotransduction. Changing the lipid composition and underlying substrate tunes bilayer fluidity, and lipid and ligand micro- and nano-patterning spatially control positioning and clustering of receptors. Patterning metal gridlines within SLBs confines lipid mobility and introduces mechanical resistance. Here we review fundamental SLB mechanics and how SLBs can be engineered as tunable cell substrates for mechanotransduction studies. Finally, we highlight the impact of this work in understanding the biophysical mechanisms of cell adhesion. This article is part of a Special Issue entitled: Interactions between membrane receptors in cellular membranes edited by Kalina Hristova.

Universal quantifier derived from AFM analysis links cellular mechanical properties and cell-surface integration forces with microbial deposition and transport behavior

In this study, we employed AFM analysis combined with mathematical modeling for quantifying cell-surface contact mechanics and magnitude and range of cell-surface interaction forces for seven bacterial strains with a wide range of cell morphology, dimension, and surface characteristics. Comprehensive cell-surface characterization including surface charge, extracellular polymeric substance content, hydrophobicity, and cell-cell aggregation analyses were performed. Flow-through column tests were employed to determine the attachment efficiency and deposition-transport behavior of these bacterial strains. No statistically significant correlation between attachment efficiency and any single-cell surface property was identified. Single-cell characterization by atomic force microscopy (AFM) yielded the mechanical deformation and elastic modulus, penetration resistance to AFM probe penetration by cellular surface substances (CSS), range and magnitude of the repulsive-attractive intersurface forces, and geometry of each strain. We proposed and derived a universal dimensionless modified Tabor's parameter to integrate all these properties that account for their collective behavior. Results showed that the Tabor parameter derived from AFM analysis correlated well with experimentally determined attachment efficiency (α), which therefore is able to link microscale cell-surface properties with macroscale bacterial transport behavior. Results suggested that the AFM tests performed between a single cell and a surface captured the key quantities of the interactions between the cell and the surface that dictate overall cell attachment behavior. Tabor's parameter therefore can be potentially incorporated into the microbial transport model.

Label-free study of the function of ion channel protein on a microfluidic optical sensor integrated with artificial cell membrane

A label-free optical sensor was constructed by integrating pH sensing material and supported phospholipid bilayers (SPBs) in a microfluidic chip. The pH sensing material was composed of a double layer structure consisting of chitosan hydrogel and electrochemically etched porous silicon. The pH change in the microchip could induce a reversible swelling of the chitosan hydrogel layer and consequently caused a shift in effective optical thickness (EOT) of the double layer, which could be observed by Fourier transformed reflectometric interference spectroscopy (FT-RIS). After phospholipid bilayers (PLBs) were self-assembled on the sensing layer, the EOT almost remained constant during the cycling of pH from 7.4 to 6.2, indicating the blockage of H(+) translocation by the PLBs. For studying the behavior of ion channel protein, gramicidin A, a typical ion channel protein, was inserted in the SPBs for mimicking the ion transportation function of cell membrane. Due to the H(+) transportation capability of gramicidin A, the optical response to pH change could partially recover. In the presence of Ca(2+), the pore of the ion channel protein was blocked, causing a significant decrease in the EOT response upon pH change. The bio-functionalized microfluidic sensor fabricated in this work will provide a reliable platform for studying the function of ion channel protein, which is an important class of drug targets.

Correlation of macroscopic aggregation behavior and microscopic adhesion properties of bacteria strains using a dimensionless Tabor's parameter

Macroscopic adhesion-aggregation, floc formation, and subsequent transportation of microorganisms in porous media are closely related to the microscopic behavior and properties of individual cells. The classical Tabor's parameter in colloidal science is modified to correlate the macroscopic aggregation and microscopic adhesion properties of microorganisms. Seven bacterial strains relevant to wastewater treatment and bioremediation were characterized in terms of their macroscopic aggregation index (AI) using an optical method, and their microscopic coupled adhesion and deformation properties using atomic force microscopy (AFM). Single cells were indented to measure the range and magnitude of the repulsive-attractive intersurface forces, elastic modulus, thickness and density of the cellular surface substances (CSS). The strong correlation suggests that cost and time effective microscopic AFM characterization is capable of making reliable prediction of macroscopic behavior.

Hybrid materials from intermolecular associations between cationic lipid and polymers

Intermolecular associations between a cationic lipid and two model polymers were evaluated from preparation and characterization of hybrid thin films cast on silicon wafers. The novel materials were prepared by spin-coating of a chloroformic solution of lipid and polymer on silicon wafer. Polymers tested for miscibility with the cationic lipid dioctadecyldimethylammonium bromide (DODAB) were polystyrene (PS) and poly(methyl methacrylate) (PMMA). The films thus obtained were characterized by ellipsometry, wettability, optical and atomic force microscopy, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and activity against Escherichia coli. Whereas intermolecular ion-dipole interactions were available for the PMMA-DODAB interacting pair producing smooth PMMA-DODAB films, the absence of such interactions for PS-DODAB films caused lipid segregation, poor film stability (detachment from the silicon wafer) and large rugosity. In addition, the well-established but still remarkable antimicrobial DODAB properties were transferred to the novel hybrid PMMA/DODAB coating, which is demonstrated to be highly effective against E. coli.

Simulations and density functional calculations of surface forces in the presence of semiflexible polymers

We simulate interactions between adsorbing and nonadsorbing surfaces immersed in solutions containing monodisperse semiflexible chains. Apart from the nature of the surfaces, we investigate responses to changes of the intrinsic chain stiffness, the degree of polymerization, and the bulk concentration. Our simulations display a sufficient accuracy and precision to reveal free-energy barriers that are small on a typical scale of surface force simulations, but still of the same order as the expected van der Waals interactions. Two different approaches have been tested: grand canonical simulations, improved by configurational-biased techniques, and a perturbation method utilizing the isotension ensemble. We find the former to be preferable when the surfaces are nonadsorbing, whereas the isotension approach is superior for calculations of interactions between adsorbing surfaces, especially if the polymers are stiff. We also compare our simulation results with predictions from several versions of polymer density functional theory. We find that a crucial aspect of these theories, in quantitative terms, is that they recognize that end monomers exclude more volume to the surrounding than inner ones do. Those theories provide satisfactorily accurate predictions, particularly when the surfaces are nonadsorbing.

Stability and fusion of lipid layers on polyelectrolyte multilayer supports studied by colloidal force spectroscopy

The interaction between lipid layers supported by polyelectrolyte multilayer cushions has been studied by means of colloidal force spectroscopy. In a typical experiment, a colloidal probe engineered with a layer-by-layer film and a lipid bilayer on top is approached to a planar surface coated in a symmetrical way. Kinks of a few nanometres in width appear when lipid layers are pressed together--reflecting either fusion processes between lipid layers or membranes, or the penetration of polymer blobs into or through the lipid layers. Retracting curves show a stepwise shape, which results from lipid tether formation or from polymer stretching, the latter suggesting that polyelectrolyte multilayers make contact as a result of penetration or lipid fusion.

Origin of short-range repulsion between hydrated phospholipid bilayers: a computer simulation study

The grand canonical Monte Carlo technique is used to simulate the pressure-distance dependence for supported dilauroylphosphatidylethanolamine (DLPE) membranes. The intra- and intermolecular interactions in the system are described with a combination of an AMBER-based force field for DLPE and a TIP4P model for water. To improve the balance between the pair interactions of like and unlike molecules, the water-lipid interaction potentials are scaled to reproduce the hydration level and intermembrane separation at full hydration. It is found that the short-range water-mediated repulsion originates from the hydration component of the intermembrane pressure, whereas the direct interaction between the membranes remains attractive throughout the pressure range studied (0-5 kbar).

Direct computer simulation of water-mediated force between supported phospholipid membranes

The grand canonical Monte Carlo technique is used to calculate the water-mediated force operating between two supported 1,2-dilauroyl-DL-phosphatidylethanolamine (DLPE) membranes in the short separation range. The intra- and intermolecular interactions in the system are described with a combination of an AMBER-based force field for DLPE and a TIP4P model for water. The long range contributions to the electrostatic interaction energy are treated in the dipole-dipole group-based approximation. The total water-mediated force is analyzed in terms of its hydration component and the component due to the direct interaction between the membranes. The latter is, in addition, partitioned into the electrostatic, van der Waals, and steric repulsion contributions to give an idea of their relative significance in the water-mediated interaction of the membranes.

Colloid stability of sodium dihexadecyl phosphate/poly(diallyldimethylammonium chloride) decorated latex

The colloid stability of supramolecular assemblies composed of the synthetic anionic lipid sodium dihexadecyl phosphate (DHP) on cationic poly(diallyldimethylammonium chloride) (PDDA) supported on polystyrene sulfate (PSS) microspheres was evaluated via turbidimetry kinetics, dynamic light scattering for particle sizing, zeta-potential analysis, and determination of DHP adsorption on PDDA-covered particles. At 0.05 g/L PDDA and 5 x 10(9) PSS particles/mL, PDDA did not induce significant particle flocculation and a vast majority of PDDA covered single particles were present in the dispersion so that this was the condition chosen for determining DHP concentration (C) effects on particle size and zeta-potentials. At 0.8 mM DHP, charge neutralization, maximal size, and visible precipitation indicated extensive flocculation and minimal colloid stability for the DHP/PDDA/PSS assembly. At 0.05 g L(-1) PDDA, isotherms of high affinity for DHP adsorption on PDDA-covered particles presented a plateau at a limiting adsorption of 135 x 10(19) DHP molecules adsorbed per square meter PSS which was well above bilayer deposition on a smooth particle surface. The polyelectrolyte layer on hydrophobic particles was swelled and fluffy yielding ca. 6 +/- 1.5 nm hydrodynamic thickness. Maximal and massive adsorption of DHP lipid onto this layer produced polydisperse DHP/PDDA/PSS colloidal particles with low colloid stability and which, at best, remained aggregated as doublets over a range of large lipid concentrations so that it was not possible to evaluate the mean total thickness for the deposited film. The assembly anionic lipid/cationic PDDA layer/polymeric particle was relatively stable as particle doublets only well above charge neutralization of the polyelectrolyte by the anionic lipid, at relatively large lipid concentrations (above 1 mM DHP) with charge neutralization leading to extensive particle aggregation.

Structure of supported bilayers composed of lipopolysaccharides and bacterial phospholipids: raft formation and implications for bacterial resistance

Lipopolysaccharide (LPS), the major lipid on the surface of Gram-negative bacteria, plays a key role in bacterial resistance to hydrophobic antibiotics and antimicrobial peptides. Using atomic force microscopy (AFM) we characterized supported bilayers composed of LPSs from two bacterial chemotypes with different sensitivities to such antibiotics and peptides. Rd LPS, from more sensitive "deep rough" mutants, contains only an inner saccharide core, whereas Ra LPS, from "rough" mutants, contains a longer polysaccharide region. A vesicle fusion technique was used to deposit LPS onto either freshly cleaved mica or polyethylenimine-coated mica substrates. The thickness of the supported bilayers measured with contact-mode AFM was 7 nm for Rd LPS and 9 nm for Ra LPS, consistent with previous x-ray diffraction measurements. In water the Ra LPS bilayer surface was more disordered than Rd LPS bilayers, likely due to the greater volume occupied by the longer Ra LPS polysaccharide region. Since deep rough mutants contain bacterial phospholipid (BPL) as well as LPS on their surfaces, we also investigated the organization of Rd LPS/BPL bilayers. Differential scanning calorimetry and x-ray diffraction indicated that incorporation of BPL reduced the phase transition temperature, enthalpy, and average bilayer thickness of Rd LPS. For Rd LPS/BPL mixtures, AFM showed irregularly shaped regions thinner than Rd LPS bilayers by 2 nm (the difference in thickness between Rd LPS and BPL bilayers), whose area increased with increasing BPL concentration. We argue that the increased permeability of deep rough mutants is due to structural modifications caused by BPL to the LPS membrane, in LPS hydrocarbon chain packing and in the formation of BPL-enriched microdomains.

Colloid stability of lipid/polyelectrolyte decorated latex

The colloid stability of supramolecular assemblies composed of the synthetic cationic lipid dioctadecyldimethylammonium bromide (DODAB) on carboxymethyl cellulose (CMC) supported on polystyrene amidine (PSA) microspheres was evaluated via turbidimetry kinetics, dynamic light scattering for particle sizing, zeta-potential analysis, and determination of DODAB adsorption on CMC-covered particles. At 0.1 g L(-1) CMC and 2 x 10(11) PSA particles/mL, CMC did not induce significant particle flocculation, and a vast majority of CMC-covered single particles were present in the dispersion so that this was the condition chosen for determining DODAB concentration (C) effects on particle size and zeta potentials. At 0.35 mM DODAB, charge neutralization, maximal size, and visible precipitation indicated extensive flocculation and minimal colloid stability for the DODAB/CMC/PSA assembly. At 0.1 g L(-1) CMC, isotherms of high affinity for DODAB adsorption on CMC-covered particles presented a plateau at a limiting adsorption of 700 x 10(17) DODAB molecules adsorbed per square meter PSA which was well above bilayer deposition on a smooth particle surface. The polyelectrolyte layer on hydrophobic particles was swelled and fluffy (ca. 11-nm hydrodynamic thickness), and maximal adsorption of DODAB lipid onto this layer produced a compressed composite cationic film with 20 mV of zeta potential and about 10-nm mean thickness. The assembly of cationic lipid/CMC layer/polymeric particle was stable only well above charge neutralization of the polyelectrolyte by the cationic lipid, at relatively large lipid concentrations (at and above 1 mM DODAB) with charge neutralization leading to extensive particle aggregation.

Surface forces in polymer fluids: A comparison between simulations and density functional theory

A polymer density functional theory is evaluated in terms of its ability to predict interactions between large surfaces in a polymer fluid. Comparisons are made with results from simulations in an expanded isotension ensemble. The variation of the net surface-surface interaction with adsorption strength is examined. Cases where the monomers interact via a pure hard sphere potential are investigated, but we have also studied the effect of attractions between the monomers. In all cases, we obtain an almost quantitative agreement between the simulated results and the predictions from the polymer density functional theory.