Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

Artificial Olfactory Biohybrid System: An Evolving Sense of Smell

The olfactory system can detect and recognize tens of thousands of volatile organic compounds (VOCs) at low concentrations in complex environments. Bioelectronic nose (B-EN), which mimics olfactory systems, is becoming an emerging sensing technology for identifying VOCs with sensitivity and specificity. B-ENs integrate electronic sensors with bioreceptors and pattern recognition technologies to enable medical diagnosis, public security, environmental monitoring, and food safety. However, there is currently no commercially available B-EN on the market. Apart from the high selectivity and sensitivity necessary for volatile organic compound analysis, commercial B-ENs must overcome issues impacting sensor operation and other problems associated with odor localization. The emergence of nanotechnology has provided a novel research concept for addressing these problems. In this work, the structure and operational mechanisms of biomimetic olfactory systems are discussed, with an emphasis on the development and immobilization of materials. Various biosensor applications and current developments are reviewed. Challenges and opportunities for fulfilling the potential of artificial olfactory biohybrid systems in fundamental and practical research are investigated in greater depth.

Odorant binding proteins fromHermetia illucens: potential sensing elements for detecting volatile aldehydes involved in early stages of organic decomposition

Organic decomposition processes, involving the breakdown of complex molecules such as carbohydrates, proteins and fats, release small chemicals known as volatile organic compounds (VOCs), smelly even at very low concentrations, but not all readily detectable by vertebrates. Many of these compounds are instead detected by insects, mostly by saprophytic species, for which long-range orientation towards organic decomposition matter is crucial. In the present work the detection of aldehydes, as an important measure of lipid oxidation, has been possible exploiting the molecular machinery underlying odour recognition inHermetia illucens(Diptera: Stratiomyidae). This voracious scavenger insect is of interest due to its outstanding capacity in bioconversion of organic waste, colonizing very diverse environments due to the ability of sensing a wide range of chemical compounds that influence the choice of substrates for ovideposition. A variety of soluble odorant binding proteins (OBPs) that may function as carriers of hydrophobic molecules from the air-water interface in the antenna of the insect to the receptors were identified, characterised and expressed. An OBP-based nanobiosensor prototype was realized using selected OBPs as sensing layers for the development of an array of quartz crystal microbalances (QCMs) for vapour phase detection of selected compounds at room temperature. QCMs coated with four recombinantH. illucensOBPs (HillOBPs) were exposed to a wide range of VOCs indicative of organic decomposition, showing a high sensitivity for the detection of three chemical compounds belonging to the class of aldehydes and one short-chain fatty acid. The possibility of using biomolecules capable of binding small ligands as reversible gas sensors has been confirmed, greatly expanding the state-of the-art in gas sensing technology.

Sensing of Airborne Infochemicals for Green Pest Management: What Is the Challenge?

One of the biggest global challenges for our societies is to provide natural resources to the rapidly expanding population while maintaining sustainable and ecologically friendly products. The increasing public concern about toxic insecticides has resulted in the rapid development of alternative techniques based on natural infochemicals (ICs). ICs (e.g., pheromones, allelochemicals, volatile organic compounds) are secondary metabolites produced by plants and animals and used as information vectors governing their interactions. Such chemical language is the primary focus of chemical ecology, where behavior-modifying chemicals are used as tools for green pest management. The success of ecological programs highly depends on several factors, including the amount of ICs that enclose the crop, the range of their diffusion, and the uniformity of their application, which makes precise detection and quantification of ICs essential for efficient and profitable pest control. However, the sensing of such molecules remains challenging, and the number of devices able to detect ICs in air is so far limited. In this review, we will present the advances in sensing of ICs including biochemical sensors mimicking the olfactory system, chemical sensors, and sensor arrays (e-noses). We will also present several mathematical models used in integrated pest management to describe how ICs diffuse in the ambient air and how the structure of the odor plume affects the pest dynamics.

An Overview of Artificial Olfaction Systems with a Focus on Surface Plasmon Resonance for the Analysis of Volatile Organic Compounds

The last three decades have witnessed an increasing demand for novel analytical tools for the analysis of gases including odorants and volatile organic compounds (VOCs) in various domains. Traditional techniques such as gas chromatography coupled with mass spectrometry, although very efficient, present several drawbacks. Such a context has incited the research and industrial communities to work on the development of alternative technologies such as artificial olfaction systems, including gas sensors, olfactory biosensors and electronic noses (eNs). A wide variety of these systems have been designed using chemiresistive, electrochemical, acoustic or optical transducers. Among optical transduction systems, surface plasmon resonance (SPR) has been extensively studied thanks to its attractive features (high sensitivity, label free, real-time measurements). In this paper, we present an overview of the advances in the development of artificial olfaction systems with a focus on their development based on propagating SPR with different coupling configurations, including prism coupler, wave guide, and grating.

Biotechnological applications of mammalian odorant-binding proteins

The olfactory system of mammals allows the detection and discrimination of thousands of odors from the environment. In mammals, odorant-binding proteins (OBPs) are considered responsible to carry odorant molecules across the aqueous nasal mucus to the olfactory receptors (ORs). The three-dimensional structure of these proteins presents eight antiparallel β-sheets and a short α-helical segment close to the C terminus, typical of the lipocalins family. The great ability of OBPs to bind differentiated ligand molecules has driven the research to understand the mechanisms underlying the OBP function in nature and the development of advanced biotechnological applications. This review describes the role of mammalian OBPs in the olfactory perception, highlighting the influence of several key parameters (amino acids, temperature, ionic strength, and pH) in the formation of the OBP/ligand complex. The information from the literature regarding OBP structure, affinity, the strength of binding, and stability inspiring the development of several applications herein detailed.

Electrochemical impedimetric biosensors, featuring the use of Room Temperature Ionic Liquids (RTILs): Special focus on non-faradaic sensing

Over the last decade, significant advancements have been made in the field of biosensing technology. With the rising demand for personalized healthcare and health management tools, electrochemical sensors are proving to be reliable solutions; specifically, impedimetric sensors are gaining considerable attention primarily due to their ability to perform label-free sensing. The novel approach of using Room Temperature Ionic Liquids (RTILs) to improve the sensitivity and stability of these detection systems makes long-term continuous sensing feasible towards a wide range of sensing applications, predominantly biosensing. Through this review, we aim to provide an update on current scientific progress in using impedimetric biosensing combined with RTILs for the development of sensitive biosensing platforms. This review also summarizes the latest trends in the field of biosensing and provides an update on the current challenges that remain unsolved.

Current and potential biotechnological applications of odorant-binding proteins

Odorant-binding proteins (OBPs) are small soluble proteins whose biological function is believed to be facilitating olfaction by assisting the transport of volatile chemicals in both vertebrate and insect sensory organs, where they are secreted. Their capability to interact with a broad range of hydrophobic compounds combined with interesting features such as being small, stable, and easy to produce and modify, makes them suitable targets for applied research in various industrial segments, including textile, cosmetic, pesticide, and pharmaceutical, as well as for military, environmental, health, and security field applications. In addition to reviewing already established biotechnological applications of OBPs, this paper also discusses their potential use in prospecting of new technologies. The development of new products for insect population management is currently the most prevailing use for OBPs, followed by biosensor technology, an area that has recently seen a significant increase in studies evaluating their incorporation into sensing devices. Finally, less typical approaches include applications in anchorage systems and analytical tools. KEY POINTS: • Odorant-binding proteins (OBPs) present desired characteristics for applied research. • OBPs are mainly used for developing new products for insect population control. • Incorporation of OBPs into chemosensory devices is a growing area of study. • Less conventional uses for OBPs include anchorage systems and analytical purposes. Graphical Abstract.

Electrochemical biosensing with odorant binding proteins

The development of sensors that mimic the natural smell sensing mechanism and selectively recognizes the odorants remains highly challenging. Electrochemical based sensing approaches aiming at monitoring molecular recognition events between surface receptors and analytes in solution or in the gas phase, are one possible transduction platforms among others for the construction of an artificial nose. The principle of electrochemical detection lies on the shift of the potential/current during the recognition event, which is proportional to the concentration of the analyte, in our case the odorant. A tremendous amount of efforts has been put into making electrochemical sensors sensitive and selective to the analyte of interest through the use of nanomaterials, development of different detection schemes and application of innovative receptor ligands for selective detection of the analyte. There have been significant advances in electrochemical based odorant sensing by using odorant binding proteins (OBP) as surface receptors, small soluble proteins present in nasal mucus at millimolar concentrations where the hydrophobic binding pocket gives the ability to reversibly bind odorant molecules. As OBPs are robust and easy to produce receptors, they are good candidates for the design of biosensors. In this chapter, we focus on the progress made on the detection of odorant molecules using OBPs as a bioreceptor and electrochemistry as a transduction method.

Bio-Inspired Strategies for Improving the Selectivity and Sensitivity of Artificial Noses: A Review

Artificial noses are broad-spectrum multisensors dedicated to the detection of volatile organic compounds (VOCs). Despite great recent progress, they still suffer from a lack of sensitivity and selectivity. We will review, in a systemic way, the biomimetic strategies for improving these performance criteria, including the design of sensing materials, their immobilization on the sensing surface, the sampling of VOCs, the choice of a transduction method, and the data processing. This reflection could help address new applications in domains where high-performance artificial noses are required such as public security and safety, environment, industry, or healthcare.

Integration of a field effect transistor-based aptasensor under a hydrophobic membrane for bioelectronic nose applications

A new bioelectronic nose based on a field effect transistor coupled with an aptamer as the sensing element was developed. The gas-to-liquid extraction interface required for appropriate aptamer function was integrated into standard CMOS technology. It was developed with the use of a sacrificial aluminium etching technique combined with surface modifications by silanes for wettability control. As a proof of concept, aptamer Van74 for vanillin was immobilized on the sensitive surface of the ISFET. The developed microsystem can selectively detect vanillin vapor in a concentration range from 2.7 ppt to 0.3 ppm, with a detection limit of 2.7 ppt. The sensor was able to detect vanillin in a gas sample obtained from roasted coffee beans. This outcome provides a foundation for developing a new generation of bioelectronic noses for the detection and discrimination of volatile compounds.

Unique supramolecular assembly through Langmuir - Blodgett (LB) technique

The Langmuir-Blodgett (LB) technique is a way of making supra-molecular assembly in ultrathin films with a controlled layered structure and crystal parameter, which have many envisioned technological applications for optical and molecular electronic devices as well as signal processing and transformation. Probably LB technique is the best method to manipulate materials at molecular level and provides a scope to realize the molecular electronics in reality. In this review article, we have discussed about the general introduction of LB technique and recent development on LB and related system including (i) LB methodology, (ii) characterizations of LB films, (iii) LB films and molecular electronics, (iv) historical review of LB films, (v) research and applications including fundamental research and application towards devices.

Progress in the development of olfactory-based bioelectronic chemosensors

Artificial chemosensory devices have a wide range of applications in industry, security, and medicine. The development of these devices has been inspired by the speed, sensitivity, and selectivity by which the olfactory system in animals can probe the chemical nature of the environment. In this review, we examine how molecular and cellular components of natural olfactory systems have been incorporated into artificial chemosensors, or bioelectronic sensors. We focus on the biological material that has been combined with signal transduction systems to develop artificial chemosensory devices. The strengths and limitations of different biological chemosensory material at the heart of these devices, as well as the reported overall effectiveness of the different bioelectronic sensor designs, is examined. This review also discusses future directions and challenges for continuing to advance development of bioelectronic sensors.

A Versatile Electronic Tongue Based on Surface Plasmon Resonance Imaging and Cross-Reactive Sensor Arrays-A Mini-Review

Nowadays, there is a strong demand for the development of new analytical devices with novel performances to improve the quality of our daily lives. In this context, multisensor systems such as electronic tongues (eTs) have emerged as promising alternatives. Recently, we have developed a new versatile eT system by coupling surface plasmon resonance imaging (SPRi) with cross-reactive sensor arrays. In order to largely simplify the preparation of sensing materials with a great diversity, an innovative combinatorial approach was proposed by combining and mixing a small number of easily accessible molecules displaying different physicochemical properties. The obtained eT was able to generate 2D continuous evolution profile (CEP) and 3D continuous evolution landscape (CEL), which is also called 3D image, with valuable kinetic information, for the discrimination and classification of samples. Here, diverse applications of such a versatile eT have been summarized. It is not only effective for pure protein analysis, capable of differentiating protein isoforms such as chemokines CXCL12α and CXCL12γ, but can also be generalized for the analysis of complex mixtures, such as milk samples, with promising potential for monitoring the deterioration of milk.

A surface acoustic wave bio-electronic nose for detection of volatile odorant molecules

In this work, a "bio-electronic nose" for vapour phase detection of odorant molecules based on surface acoustic wave (SAW) resonators is presented. The biosensor system is composed of an array of five SAW resonators coated with three types of odorant-binding proteins (OBPs): the wild-type OBP from bovine (wtbOBP), a double-mutant of the OBP from bovine (dmbOBP), and the wild-type OBP from pig (wtpOBP). High resolution deposition of OBPs onto the active area of SAW resonators was implemented through laser-induced forward transfer (LIFT). The resonant frequency shifts of the SAW resonators after the deposition of the biomolecules confirmed the immobilisation of the proteins onto the Al/Au inter-digital transducers (IDTs). In addition, a low increase of insertion losses with a limited degradation of Q-factors is reported. The "bio-electronic nose" fabricated by LIFT is tested in nitrogen upon exposure to separated concentrations of R-(-)-1-octen-3-ol (octenol) and R-(-)-carvone (carvone) vapours. The "bio-electronic nose" showed low detection limits for the tested compounds (i.e. 0.48 ppm for the detection of octenol, and 0.74 ppm for the detection of carvone). In addition, the bio-sensing system was able to discriminate the octenol molecules from the carvone molecules, making it pertinent for the assessment of food contamination by moulds, or for the evaluation of indoor air quality in buildings.

Structure and biotechnological applications of odorant-binding proteins

Odorant-binding proteins (OBPs) are small soluble polypeptides found in sensory organs of vertebrates and insects as well as in secretory glands and are dedicated to detection and release of chemical stimuli. OBPs of vertebrates belong to the family of lipocalin proteins, while those of insects are folded into α-helical domains. Both types of architectures are extremely stable to temperature, organic solvents and proteolytic digestion. These characteristics make OBPs suitable elements for fabricating biosensors to be used in the environment, as well as for other biotechnological applications. The affinity of OBPs for small volatile organic compounds is in the micromolar range, and they have broad specificity to a range of ligands. For biotechnological applications, OBPs can be expressed in bacterial systems at low cost and are easily purified. The large amount of information available on their structures and affinities to different molecules should allow the design of specific mutants with desired characteristics and represent a solid base for tailoring OBPs for different applications.

On-site airborne pheromone sensing

Pheromones and other semiochemicals play an important role in the natural world by influencing the behavior of plants, mammals, and insects. In the latter case, species-dependent pheromone communication has numerous applications, including the detection, trapping, monitoring and guiding of insects, as well as pest management in agriculture. On-site sensors are desirable when volatile organic compounds (VOCs) are used as semiochemicals. Insects have evolved highly selective sensors for such compounds, so biosensors comprising complete insects, isolated organs or individual proteins can be highly effective. However, isolated insect organs have a limited lifetime as biosensor, so biomimetic approaches are needed for prolonged monitoring, novel applications, or measurements in challenging environments. We discuss the development of on-site biosensors and biomimetic approaches for airborne-pheromone sensing, together with biomimetic VOC sensor systems. Furthermore, the infochemical effect describing the anthropogenic contamination of the ecosystem through semiochemicals, will be considered in the context of novel on-site pheromone sensing-systems.

Impedance sensing and molecular modeling of an olfactory biosensor based on chemosensory proteins of honeybee

By mimicking biological olfaction, biosensors have been used for the detection of important ligands in complex environments. An olfactory biosensor based on chemosensory proteins (CSPs) was designed by immobilizing honeybee CSPs (Ac-ASP3) on the interdigitated golden electrodes. Its responses to ligands of pheromones and floral odors were recorded by impedance spectroscopy. The relative decrease of charge transfer resistance of the biosensor is proportional to the logarithm of ligand concentration from 10(-7)M to 10(-3)M. To explore the molecular recognition processes of the biosensor, the tertiary structure of the protein was modeled and the protein-ligand interactions were investigated by the molecular docking. Our docking results verified the validity of experiments and showed that the specific ligands could form hydrogen bonds with some of the conserved residues, such as Cys 60 and Gln 64 of Ac-ASP3. Furthermore, combining the molecular modeling with impedance detection, the accuracy, specificity and predictability of the ligands binding to the protein could be improved. Thus, CSPs will provide a promising approach for chemical molecular sensing at low concentrations.

Post-mortem volatiles of vertebrate tissue

Volatile emission during vertebrate decay is a complex process that is understood incompletely. It depends on many factors. The main factor is the metabolism of the microbial species present inside and on the vertebrate. In this review, we combine the results from studies on volatile organic compounds (VOCs) detected during this decay process and those on the biochemical formation of VOCs in order to improve our understanding of the decay process. Micro-organisms are the main producers of VOCs, which are by- or end-products of microbial metabolism. Many microbes are already present inside and on a vertebrate, and these can initiate microbial decay. In addition, micro-organisms from the environment colonize the cadaver. The composition of microbial communities is complex, and communities of different species interact with each other in succession. In comparison to the complexity of the decay process, the resulting volatile pattern does show some consistency. Therefore, the possibility of an existence of a time-dependent core volatile pattern, which could be used for applications in areas such as forensics or food science, is discussed. Possible microbial interactions that might alter the process of decay are highlighted.

Odorant binding protein based biomimetic sensors for detection of alcohols associated with Salmonella contamination in packaged beef

Detection of food-borne bacteria present in the food products is critical to prevent the spread of infectious diseases. Intelligent quality sensors are being developed for detecting bacterial pathogens such as Salmonella in beef. One of our research thrusts was to develop novel sensing materials sensitive to specific indicator alcohols at low concentrations. Present work focuses on developing olfactory sensors mimicking insect odorant binding protein to detect alcohols in low concentrations at room temperature. A quartz crystal microbalance (QCM) based sensor in conjunction with synthetic peptide was developed to detect volatile organic compounds indicative to Salmonella contamination in packaged beef. The peptide sequence used as sensing materials was derived from the amino acids sequence of Drosophila odorant binding protein, LUSH. The sensors were used to detect alcohols: 3-methyl-1-butanol and 1-hexanol. The sensors were sensitive to alcohols with estimated lower detection limits of <5 ppm. Thus, the LUSH-derived QCM sensors exhibited potential to detect alcohols at low ppm concentrations.

Studies of dipalmitoylphosphatidylcholine (DPPC) monolayers embedded with endohedral metallofullerene (Dy@C82)

Toxicological effects of carbon nanomaterials have attracted increasing attention. In this work, we studied the interaction between Dy@C(82) and dipalmitoylphosphatidylcholine (DPPC) in a monolayer at the N(2)/Tris buffer interface by thermodynamic analysis of surface pressure-area (pi-A) and surface potential-area (DeltaV-A) isotherms. Dy@C(82) was found to impact considerably more on the physical properties of the monolayers than C(60) because of its elliptical structure and distinctive dipole. The addition of Dy@C(82) essentially closed down the liquid expanded-liquid condensed (LE-LC) phase coexistence region of the mixed monolayers. Furthermore, Dy@C(82) reduced elasticity of the monolayers, as indicated by the decreasing elastic modulus (C(s)(-1)) with increasing molar ratio of Dy@C(82) (X(Dy@C82)). Brewster angle microscopy (BAM) and atomic force microscopy (AFM) revealed that the dispersion of Dy@C(82) depend on the state of the mixed films. Dy@C(82) formed flocs from aggregation of Dy@C(82) towers in the LE and LE-LC coexistence regions, accompanied by gradual falling down of Dy@C(82) from the towers and permeation of the falling metallofullerenes into the LE phase during their compression-induced reorientation process. In the LC and solid phases, the Dy@C(82) flocs were dispersed into isolated towers, accompanied by the partial squeezing out of the embedded metallofullerenes to above the DPPC monolayer. The continuous falling down of Dy@C(82) from the towers resulted in their height decrease but diameter enlargement. When the surface pressure was increased to the kink value (53 mN/m), Dy@C(82) was almost completely extruded from the DPPC monolayers. These findings are believed to be important for understanding the impact of fullerenes, metallofullerenes, and nanomaterials in general on biological membranes.

A new concept of olfactory biosensor based on interdigitated microelectrodes and immobilized yeasts expressing the human receptor OR17-40

This work shows the feasibility of an olfactory biosensor based on the immobilization of Saccharomyces cerevisiae yeast cells genetically modified to express the human olfactory receptor OR17-40 onto interdigitated microconductometric electrodes. This olfactory biosensor has been applied to the detection of its specific odorant (helional) with a high sensitivity (threshold 10(-14) M). In contrast, no significant response was observed using a non-specific odorant (heptanal), which suggests a good selectivity. Thus, this work may represent a first step towards a new kind of bioelectronic noses based on whole yeast cells and allowing a real time monitoring of olfactory receptor activation.