DNA-functionalized MFe2O4 (M = Fe, Co, or Mn) nanoparticles and their hybridization to DNA-functionalized surfaces

Cooperative dynamics of DNA-grafted magnetic nanoparticles optimize magnetic biosensing and coupling to DNA origami

Magnetic nanoparticles (MNPs) provide new opportunities for enzyme-free biosensing of nucleic acid biomarkers and magnetic actuation by patterning on DNA origami, yet how the DNA grafting density affects their dynamics and accessibility remains poorly understood. Here, we performed surface functionalization of MNPs with single-stranded DNA (ssDNA) via click chemistry with a tunable grafting density, which enables the encapsulation of single MNPs inside a functional polymeric layer. We used several complementary methods to show that particle translational and rotational dynamics exhibit a sigmoidal dependence on the ssDNA grafting density. At low densities, ssDNA strands adopt a coiled conformation that results in minor alterations to particle dynamics, while at high densities, they organize into polymer brushes that collectively influence particle dynamics. Intermediate ssDNA densities, where the dynamics are most sensitive to changes, show the highest magnetic biosensing sensitivity for the detection of target nucleic acids. Finally, we demonstrate that MNPs with high ssDNA grafting densities are required to efficiently couple to DNA origami. Our results establish ssDNA grafting density as a critical parameter for the functionalization of MNPs for magnetic biosensing and functionalization of DNA nanostructures.

[Nanotechnologies in ophthalmology]

Application of new materials and methods in the diagnosis and treatment of eye diseases is one of the promising research areas in modern ophthalmology. Significant progress has been made in understanding the pathogenesis, diagnosis and treatment of eye diseases using nanotechnologies and nanomaterials. This paper presents the main achievements and results of original research on this issue. It has been shown that nanoparticles are able to overcome biological barriers, deliver drugs to the target site, and provide the required drug release rate. Modern nanotechnological approaches in tissue engineering are also being actively introduced into ophthalmology, making it possible to create nanoframeworks for growing three-dimensional cellular structures, including arrays of pigment epithelium cells and retinal ganglion cells for the treatment of retinal damage caused by degenerative diseases, injuries and infections.

Nanomaterial and interface advances in immunoassay biosensors

Biosensors have been used for a remarkable array of applications, including infectious diseases, environmental monitoring, cancer diagnosis, food safety, and numerous others. In particular, the global COVID-19 pandemic has exposed a need for rapid tests, so the type of biosensor that has gained considerable interest recently are immunoassays, which are used for rapid diagnostics. The performance of paper-based lateral flow and dipstick immunoassays is influenced by the physical properties of the nanoparticles (NPs), NP-antibody conjugates, and paper substrate. Many materials innovations have enhanced diagnostics by increasing sensitivity or enabling unique readouts. However, negative side effects can arise at the interface between the biological sample and biomolecules and the NP or paper substrate, such as non-specific adsorption and protein denaturation. In this Perspective, we discuss the immunoassay components and highlight chemistry and materials innovations that can improve sensitivity. We also explore the range of bio-interface issues that can present challenges for immunoassays.

Multimodal PSSMA-Functionalized GdF3 : Eu3+ (Tb3+ ) Nanoparticles for Luminescence Imaging, MRI, and X-Ray Computed Tomography

Biocompatible poly(4-styrenesulfonic acid-co-maleic acid)-stabilized GdF₃  : Eu³⁺ (Tb³⁺ ) nanoparticles were obtained by a one-step coprecipitation method in ethylene glycol or water. The particles are very small (3 nm), have a narrow size distribution, and were detectable by fluorescence, magnetic resonance, and X-ray contrast imaging. These properties allow multimodal imaging, which has prospective applications in the simultaneous and detailed detection of diseased tissues.

Interface-Assisted Synthesis of the Mn3-xFexO4 Gradient Film with Multifunctional Properties

Anisotropic gradient materials are considered as promising and novel in that they have numerous functional properties and are able to transform into hierarchical microstructures. We report a facile method of gradient inorganic thin film synthesis through diffusion-controlled deposition at the gas-solution interface. To investigate the reaction of interfacial phase boundary controllable hydrolysis by gaseous ammonium, an aqueous solution of FeCl₃ and MnCl₂ was chosen, as the precipitation pH values for the hydroxides of these metals differ gradually. As a result of synthesis using the gas-solution interface technique (GSIT), a thin film is formed on the surface of the solution that consists of Mn²⁺(Fe,Mn)₂³⁺O₄ nanoparticles with hausmannite crystal structure. The ratio between iron and manganese in the film can be adjusted over a wide range by varying the synthetic procedure. Specific conditions are determined that allow the formation of a Mn-Fe mixed oxide film with a gradient of composition, morphology, and properties, as well as its further transformation into microscrolls with a diameter of 10-20 μm and a length of up to 300 μm, showing weak superparamagnetic properties. The technique reported provides a new interfacial route for the development of functional gradient materials with tubular morphology.

The role of hollow magnetic nanoparticles in drug delivery

The increasing number of scientific publications focusing on nanomaterials in the biomedical field indicates growing interest from the broader scientific community. Nanomedicine is a modern science, and research continues into the application of nanoscale materials for the therapy and diagnosis of damaged tissues. In this regard, substantial progress has been made in the synthesis of magnetic materials with desired sizes, morphologies, chemical compositions, and surface chemistry. Among these, magnetic iron oxide nanoparticles have demonstrated great promise as unique carriers in the delivery of chemical drugs due to their combinations of hollow structures. Importantly, due to the combination of the ability to respond to an external magnetic field and the rich possibilities of their coatings, magnetic materials are universal tools for the magnetic separation of small molecules, biomolecules, and cells. This review provides an overview of the synthesis and biological applications of hollow magnetic nanoparticles in drug delivery systems.

Tumor Microenvironment-Triggered Aggregation of Antiphagocytosis 99m Tc-Labeled Fe3 O4 Nanoprobes for Enhanced Tumor Imaging In Vivo

A tumor microenvironment responsive nanoprobe is developed for enhanced tumor imaging through in situ crosslinking of the Fe₃ O₄ nanoparticles modified with a responsive peptide sequence in which a tumor-specific Arg-Gly-Asp peptide for tumor targeting and a self-peptide as a "mark of self" are linked through a disulfide bond. Positioning the self-peptide at the outmost layer is aimed at delaying the clearance of the nanoparticles from the bloodstream. After the self-peptide is cleaved by glutathione within tumor microenvironment, the exposed thiol groups react with the remaining maleimide moieties from adjacent particles to crosslink the particles in situ. Both in vitro and in vivo experiments demonstrate that the aggregation substantially improves the magnetic resonance imaging (MRI) contrast enhancement performance of Fe₃ O₄ particles. By labeling the responsive particle probe with ^99m Tc, single-photon emission computed tomography is enabled not only for verifying the enhanced imaging capacity of the crosslinked Fe₃ O₄ particles, but also for achieving sensitive dual modality imaging of tumors in vivo. The novelty of the current probe lies in the combination of tumor microenvironment-triggered aggregation of Fe₃ O₄ nanoparticles for boosting the T₂ MRI effect, with antiphagocytosis surface coating, active targeting, and dual-modality imaging, which is never reported before.

UV-curable nanocomposite based on methacrylic-siloxane resin and surface-modified TiO2 nanocrystals

A novel UV-light-curable nanocomposite material formed of a methacrylic-siloxane resin loaded with 1 wt % oleic acid and 3-(trimethoxysilyl)propyl methacrylate silane (OLEA/MEMO)-coated TiO2 nanorods (NRs) has been manufactured as a potential self-curing structural coating material for protection of monuments and artworks, optical elements, and dental components. OLEA-coated TiO2 NRs, presynthesized by a colloidal chemistry route, have been surface-modified by a treatment with the methacrylic-based silane coupling agent MEMO. The resulting OLEA/MEMO-capped TiO2 NRs have been dispersed in MEMO; that is a monomer precursor of the organic formulation, used as a "common solvent" for transferring the NRs in prepolymer components of the formulation. Differential scanning calorimetry and Fourier transform infrared spectroscopy have allowed investigation of the effects of the incorporation of the OLEA/MEMO-capped TiO2 NRs on reactivity and photopolymerization kinetics of the nanocomposite, demonstrating that the embedded NRs significantly increase curing reactivity of the neat organic formulation both in air and inert atmosphere. Such a result has been explained on the basis of the photoactivity of the nanocrystalline TiO2 which behaves as a free-radical donor photocatalyst in the curing reaction, finally turning out more effective than the commonly used commercial photoinitiator. Namely, the NRs have been found to accelerate the cure rate and increase cross-linking density, promoting multiple covalent bonds between the resin prepolymers and the NR ligand molecules, and, moreover, they limit inhibition effect of oxygen on photopolymerization. The NRs distribute uniformly in the photocurable matrix, as assessed by transmission electron microscopy analysis, and increase glass transition temperature and water contact angle of the nanocomposite with respect to the neat resin.

A novel DNA nanosensor based on CdSe/ZnS quantum dots and synthesized Fe3O4 magnetic nanoparticles

Although nanoparticle-enhanced biosensors have been extensively researched, few studies have systematically characterized the roles of nanoparticles in enhancing biosensor functionality. This paper describes a successful new method in which DNA binds directly to iron oxide nanoparticles for use in an optical biosensor. A wide variety of nanoparticles with different properties have found broad application in biosensors because their small physical size presents unique chemical, physical, and electronic properties that are different from those of bulk materials. Of all nanoparticles, magnetic nanoparticles are proving to be a versatile tool, an excellent case in point being in DNA bioassays, where magnetic nanoparticles are often used for optimization of the hybridization and separation of target DNA. A critical step in the successful construction of a DNA biosensor is the efficient attachment of biomolecules to the surface of magnetic nanoparticles. To date, most methods of synthesizing these nanoparticles have led to the formation of hydrophobic particles that require additional surface modifications. As a result, the surface to volume ratio decreases and nonspecific bindings may occur so that the sensitivity and efficiency of the device deteriorates. A new method of large-scale synthesis of iron oxide (Fe₃O₄) nanoparticles which results in the magnetite particles being in aqueous phase, was employed in this study. Small modifications were applied to design an optical DNA nanosensor based on sandwich hybridization. Characterization of the synthesized particles was carried out using a variety of techniques and CdSe/ZnS core-shell quantum dots were used as the reporter markers in a spectrofluorophotometer. We showed conclusively that DNA binds to the surface of ironoxide nanoparticles without further surface modifications and that these magnetic nanoparticles can be efficiently utilized as biomolecule carriers in biosensing devices.

Magnetic/upconversion fluorescent NaGdF4:Yb,Er nanoparticle-based dual-modal molecular probes for imaging tiny tumors in vivo

Detection of early malignant tumors remains clinically difficult; developing ultrasensitive imaging agents is therefore highly demanded. Owing to the unusual magnetic and optical properties associated with f-electrons, rare-earth elements are very suitable for creating functional materials potentially useful for tumor imaging. Nanometer-sized particles offer such a platform with which versatile unique properties of the rare-earth elements can be integrated. Yet the development of rare-earth nanoparticle-based tumor probes suitable for imaging tiny tumors in vivo remains difficult, which challenges not only the physical properties of the nanoparticles but also the rationality of the probe design. Here we report new approaches for size control synthesis of magnetic/upconversion fluorescent NaGdF4:Yb,Er nanocrystals and their applications for imaging tiny tumors in vivo. By independently varying F(-):Ln(3+) and Na(+):Ln(3+) ratios, the size and shape regulation mechanisms were investigated. By replacing the oleic acid ligand with PEG2000 bearing a maleimide group at one end and two phosphate groups at the other end, PEGylated NaGdF4:Yb,Er nanoparticles with optimized size and upconversion fluorescence were obtained. Accordingly, a dual-modality molecular tumor probe was prepared, as a proof of concept, by covalently attaching antitumor antibody to PEGylated NaGdF4:Yb,Er nanoparticles through a "click" reaction. Systematic investigations on tumor detections, through magnetic resonance imaging and upconversion fluorescence imaging, were carried out to image intraperitoneal tumors and subcutaneous tumors in vivo. Owing to the excellent properties of the molecular probes, tumors smaller than 2 mm was successfully imaged in vivo. In addition, pharmacokinetic studies on differently sized particles were performed to disclose the particle size dependent biodistributions and elimination pathways.

Stability of gold nanorods passivated with amphiphilic ligands

The stability of gold nanorods (NRs) coated with amphiphilic ligands (ALs) was investigated. NRs coated with cetyltrimethylammonium bromide (CTAB) were ligand exchanged with polyoxyethylene [10] cetyl ether (Brij56), Oligofectamine (OF), and phosphatidylserine (PS). An aggregation index based on the longitudinal surface plasmon resonance peak broadening was used to measure stability of the NR-ALs under different conditions including the number of washes, pH, ionic concentration, and temperature. The aggregation index was also used to measure the stability of the NR-ALs under ultrafast laser irradiation and in the presence of proteins commonly used in cell culture. Differences in NR-AL stability were found, which were due to differences in the physical and chemical properties of the ALs. Apart from the charge on the AL headgroup, we suggest the Gibbs free energy of passivation (ΔG(p)) and enthalpy of passivation (ΔH(p)) of the AL could potentially aid in the selection of amphiphiles that can effectively passivate NRs for stability and optimize their properties and desired biological impact.

Electrostatic assembly of a DNA superparamagnetic nano-tool for simultaneous intracellular delivery and in situ monitoring

A superparamagnetic γFe(2)O(3) nanocarrier was developed, characterized by spectroscopic methods and evaluated for the delivery of a decoy oligonucleotide (dODN) in human colon carcinoma SW 480 cells. This nanoparticle-dODN bioconjugate (γFe(2)O(3)@dODN) was designed to target the signal transducer and activator of transcription 3, STAT3, a key regulator of cell survival and proliferation. We exploited a simple precipitation-redispersion mechanism for the direct and one-step complexation of a labeled decoy oligonucleotide with iron oxide nanoparticles (NPs). The cell internalization of the decoy γFe(2)O(3)@dODN nanoparticles is demonstrated and suggests the potential for DNA delivery in biological applications. Despite the increasing use of NPs in biology and medicine, convenient methods to quantify them within cells are still lacking. In this work, taking advantage of the nonlinear magnetic behavior of our superparamagnetic NPs, we have developed a new method to quantify in situ their internalization by cells.

FROM THE CLINICAL EDITOR

In this study, the authors demonstrate methods to quantify superparamagnetic nanocarriers within cells, taking advantage of the nonlinear magnetic behavior of the studied NPs.

Chemical grafting of a DNA intercalator probe onto functional iron oxide nanoparticles: a physicochemical study

Spherical magnetite nanoparticles (MNPs, ∼ 24 nm in diameter) were sequentially functionalized with trimethoxysilylpropyldiethylenetriamine (TMSPDT) and a synthetic DNA intercalator, namely, 9-chloro-4H-pyrido[4,3,2-kl]acridin-4-one (PyAcr), in order to promote DNA interaction. The designed synthetic pathway allowed control of the chemical grafting efficiency to access MNPs either partially or fully functionalized with the intercalator moiety. The newly prepared nanomaterials were characterized by a range of physicochemical techniques: FTIR, TEM, PXRD, and TGA. The data were consistent with a full surface coverage by immobilized silylpropyldiethylenetriamine (SPDT) molecules, which corresponds to ∼22,300 SPDT molecules per MNP and a subsequent (4740-2940) PyAcr after the chemical grafting step (i.e., ∼ 2.4 PyAcr/nm(2)). A greater amount of PyAcr (30,600) was immobilized by the alternative strategy of binding a fully prefunctionalized shell to the MNPs with up to 16.1 PyAcr/nm(2). We found that the extent of PyAcr functionalization strongly affects the resulting properties and, particularly, the colloidal stability as well as the surface charge estimated by ζ-potential measurement. The intercalator grafting generates a negative charge contribution which counterbalances the positive charge of the single SPDT shell. The DNA binding capability was measured by titration assay and increases from 15 to 21.5 μg of DNA per mg of MNPs after PyAcr grafting (14-20% yield) but then drops to only ∼2 μg for the fully functionalized MNPs. This highlights that even if the size of the MNPs is obviously a determining factor to promote surface DNA interaction, it is not the only limiting parameter, as the mode of binding and the interfacial charge density are essential to improve loading capability.

Gum arabic modified Fe3O4 nanoparticles cross linked with collagen for isolation of bacteria

Background

Multifunctional magnetic nanoparticles are important class of materials in the field of nanobiotechnology, as it is an emerging area of research for material science and molecular biology researchers. One of the various methods to obtain multifunctional nanomaterials, molecular functionalization by attaching organic functional groups to nanomagnetic materials is an important technique. Recently, functionalized magnetic nanoparticles have been demonstrated to be useful in isolation/detection of dangerous pathogens (bacteria/viruses) for human life. Iron (Fe) based material especially FePt is used in the isolation of ultralow concentrations (< 10² cfu/ml) of bacteria in less time and it has been demonstrated that van-FePt may be used as an alternative fast detection technique with respect to conventional polymerase chain reaction (PCR) method. However, still further improved demonstrations are necessary with interest to biocompatibility and green chemistry. Herein, we report the synthesis of Fe₃O₄ nanoparticles by template medication and its application for the detection/isolation of S. aureus bacteria.

Results

The reduction of anhydrous Iron chloride (FeCl₃) in presence of sodium borohydride and water soluble polyelectrolyte (polydiallyldimethyl ammonium chloride, PDADMAC) produces black precipitates. The X-ray diffraction (XRD), XPS and TEM analysis of the precipitates dried at 373 K demonstrated the formation of nanocrystalline Fe₃O₄. Moreover, scanning electron microscopy (SEM) showed isolated staphylococcous aureus (S. aureus) bacteria at ultralow concentrations using collagen coated gum arabic modified iron oxide nanoparticles (CCGAMION).

Conclusion

We are able to synthesize nanocrystalline Fe₃O₄ and CCGAMION was able to isolate S. aureus bacteria at 8-10 cfu (colony forming units)/ml within ~3 minutes.

Monodisperse cobalt ferrite nanomagnets with uniform silica coatings

Ferro- and ferrimagnetic nanoparticles are difficult to manipulate in solution as a consequence of the formation of magnetically induced nanoparticle aggregates, which hamper the utility of these particles for applications ranging from data storage to bionanotechnology. Nonmagnetic shells that encapsulate these magnetic particles can reduce the interparticle magnetic interactions and improve the dispersibility of the nanoparticles in solution. A route to create uniform silica shells around individual cobalt ferrite nanoparticles--which uses poly(acrylic acid) to bind to the nanoparticle surface and inhibit nanoparticle aggregation prior to the addition of a silica precursor--was developed. In the absence of the poly(acrylic acid) the cobalt ferrite nanoparticles irreversibly aggregated during the silica shell formation. The thickness of the silica shell around the core-shell nanoparticles could be controlled in order to tune the interparticle magnetic coupling as well as inhibit magnetically induced nanoparticle aggregation. These ferrimagnetic core-silica shell structures form stable dispersion in polar solvents such as EtOH and water, which is critical for enabling technologies that require the assembly or derivatization of ferrimagnetic particles in solution.

Nanoscale interfaces to biology

Nanotechnology has held great promise for revolutionizing biology. The biological behavior of nanomaterials depends primarily on how they interface to biomolecules and their surroundings. Unfortunately, interface issues like non-specific adsorption are still the biggest obstacles to the success of nanobiotechnology and nanomedicine, and have held back widespread practical use of nanotechnology in biology. Not only does the biological interface of nanoparticles (NPs) need to be understood and controlled, but also NPs must be treated as biological entities rather than inorganic ones. Furthermore, one can adopt an engineering perspective of the NP-biological interface, realizing that it has unique, exploitable properties.

Synthesis of magnetic Al/Au nanoparticles by co-reduction of Au3+ and Al3+ metal salts

In current study, it reported the synthesis of water soluble; monos disperse Al/Au bimetallic nanoparticles with a middling length of 7 nm. Synthesis engages concurrent reduction of Al3+ and Au3+ in water to give way bimetallic nanoparticles. The elemental content of Al is 1.5%. Nanoparticles display ferromagnetic performance as deliberate by SQUID. These particles can be effortlessly conjugated to thiolated DNA, as confirmation by mobility shifts in agarose gel electrophoresis. Nanoparticles heat in solution to temperatures above 40 degrees C, representative appropriateness for hyperthermia.

Liver and brain imaging through dimercaptosuccinic acid-coated iron oxide nanoparticles

BACKGROUND & AIM

Uptake, cytotoxicity and interaction of improved superparamagnetic iron oxide nanoparticles were studied in cells, tissues and organs after single and multiple exposures.

MATERIAL & METHOD

We prepared dimercaptosuccinic acid-coated iron oxide nanoparticles by thermal decomposition in organic medium, resulting in aqueous suspensions with a small hydrodynamic size (< 100 nm), high saturation magnetization and susceptibility, high nuclear magnetic resonance contrast and low cytotoxicity.

RESULTS

In vitro and in vivo behavior showed that these nanoparticles are efficient carriers for drug delivery to the liver and brain that can be combined with MRI detection.

Superparamagnetic nanoparticles as targeted probes for diagnostic and therapeutic applications

Superparamagnetic nanoparticles (NPs) have been attractive for medical diagnostics and therapeutics due to their unique magnetic properties and their ability to interact with various biomolecules of interest. The solution phase based chemical synthesis provides a near precise control on NP size, and monodisperse magnetic NPs with standard deviation in diameter of less than 10% are now routinely available. Upon controlled surface functionalization and coupling with fragments of DNA strands, proteins, peptides or antibodies, these NPs can be well-dispersed in biological solutions and used for drug delivery, magnetic separation, magnetic resonance imaging contrast enhancement and magnetic fluid hyperthermia. This Perspective reviews the common syntheses and controlled surface functionalization of monodisperse Fe(3)O(4)-based superparamagnetic NPs. It further outlines the exciting application potentials of these NPs in magnetic resonance imaging and drug delivery.

Magnetic nanoparticles: synthesis, functionalization, and applications in bioimaging and magnetic energy storage

This tutorial review summarizes the recent advances in the chemical synthesis and potential applications of monodisperse magnetic nanoparticles. After a brief introduction to nanomagnetism, the review focuses on recent developments in solution phase syntheses of monodisperse MFe(2)O(4), Co, Fe, CoFe, FePt and SmCo(5) nanoparticles. The review further outlines the surface, structural, and magnetic properties of these nanoparticles for biomedicine and magnetic energy storage applications.

Magnetic particle-based hybrid platforms for bioanalytical sensors

Biomagnetic nano and microparticles platforms have attracted considerable interest in the field of biological sensors due to their interesting physico-chemical properties, high specific surface area, good mechanical stability and opportunities for generating magneto-switchable devices. This review discusses recent advances in the development and characterization of active biomagnetic nanoassemblies, their interaction with biological molecules and their use in bioanalytical sensors.

Application of magnetic nanoparticles in biomedicine

The use of nanomaterials offers many advantages due to their unique properties. They can be used as building blocks for the fabrication of various functional diagnostic systems and agents of therapy. This article focuses on the application of magnetic nanoparticles in biomedicine such as magnetic separation, biosensor, contrast agents for MRI (magnetic resonance imaging), local operated hyperthermic treatment of tumors, drug delivery, gene therapy, tissue engineering.

Bis-phosphonates-ultra small superparamagnetic iron oxide nanoparticles: a platform towards diagnosis and therapy

A new type of multifunctional magnetic nano-platform for diagnosis and therapy applications was designed using bisphosphonate/carboxylic ligands.

Controlling transport and chemical functionality of magnetic nanoparticles

A wide range of metal, magnetic, semiconductor, and polymer nanoparticles with tunable sizes and properties can be synthesized by wet-chemical techniques. Magnetic nanoparticles are particularly attractive because their inherent superparamagnetic properties make them desirable for medical imaging, magnetic field assisted transport, and separations and analyses. With such applications on the horizon, synthetic routes for quickly and reliably rendering magnetic nanoparticle surfaces chemically functional have become an increasingly important focus. This Account describes common synthetic routes for making and functionalizing magnetic nanoparticles and discusses initial applications in magnetic field induced separations. The most widely studied magnetic nanoparticles are iron oxide (Fe2O3 and Fe3O4), cobalt ferrite (CoFe 2O4), iron platinum (FePt), and manganese ferrite (MnFe 2O4), although others have been investigated. Magnetic nanoparticles are typically prepared under either high-temperature organic phase or aqueous conditions, producing particles with surfaces that are stabilized by attached surfactants or associated ions. Although it requires more specialized glassware, high-temperature routes are generally preferred when a high degree of stability and low particle size dispersity is desired. Particles can be further modified with a secondary metal or polymer to create core-shell structures. The outer shells function as protective layers for the inner metal cores and alter the surface chemistry to enable postsynthetic modification of the surfactant chemistry. Efforts by our group as well as others have centered on pathways to yield nanoparticles with surfaces that are both easily functionalized and tunable in terms of the number and variety of attached species. Ligand place-exchange reactions have been shown quite successful for exchanging silanes, acids, thiols, and dopamine ligands onto the surfaces of some magnetic particles. Poly(ethylene oxide)-modified phospholipids can be inserted into nonpolar surface monolayers of as-prepared nanoparticles as a method for modifying the surface chemistry that induces water solubility. In general, reactive termini can subsequently be used to append a range of chemical groups. For example, surfactants with trifluoroethylester or azide termini have been used to attach a range of amine- or alkyne-containing species, respectively. Chemically functionalized magnetic nanoparticles are promising as advanced materials for analytical separations and analysis. Magnetic field flow fractionation leverages the size-dependent magnetic moments to purify and separate the components of a complex mixture of particles. Similarly, magnetic field gradients are useful for manipulating transport and separation in simple microfluidic devices. By either approach, magnet-induced transport of the particles is a simple method in which an attached reagent, catalyst, or bioanalytical tag can be moved between flow streams within a lab on a chip device.

Structure of cytochrome c at the interface with magnetic CoFe2O4nanoparticles

Yeast and horse cytochrome c are attached to 6 nm CoFe2O4 nanoparticles and their structure is studied as a function of the nanoparticle surface chemistry. For yeast cytochrome c, the attachment is covalent and site-specific via dithiol cross-linkage between cysteine 102 and dimercaptosuccinic acid, the nanoparticle ligand. To control site-specificity and allow better characterization of non-specific interactions, horse cytochrome c is non-specifically linked to the nanoparticle. Circular dichroism shows that the structure of both proteins is affected by linkage to the CoFe2O4 nanoparticle. Non-specific adsorption depends strongly on the surface properties of the nanoparticles. Co-functionalization with lysine improves protein folding, most likely by decreasing the nanoparticle net charge and impeding carboxylic acids residues from binding to surface cobalt and iron atoms. Higher protein coverage also helps folding for both yeast and horse cytochrome c.

Surface modification of gamma-Fe2O3@SiO2 magnetic nanoparticles for the controlled interaction with biomolecules

Modifying the surface of magnetic nanoparticles (MNPs) to allow for controlled interaction with biomolecules enables their implementation in biomedical applications such as contrast agents for magnetic resonance imaging, labels in magnetic biosensing or media for magnetically assisted bioseparation. In this paper, self-assembly of trialkoxysilanes is used to chemically functionalize the surface of gamma-Fe2O3@SiO2 core-shell particles. First, the silane deposition procedure was optimized using infrared analysis in order to obtain maximum packing density of the silanes on the particles. The surface coverage was determined to be approximately 8 x 10(14) molecules/cm2. It was shown that the magnetic, crystalline, and morphological properties of the MNPs were not altered by deposition of a thin silane coating. The optimized procedure was transferred for the deposition of aldehyde and poly(ethylene glycol) (PEG) presenting silanes. The presence of both silanes on the particle surface was confirmed using XPS and FTIR. The interaction of proteins with silane-modified MNPs was monitored using a Bradford protein assay. Our results demonstrate that, by introducing aldehyde functions, the MNPs are capable of covalently binding human IgG while retaining their specific binding capacity. Maximum surface coverage occurs at 46 microg antibodies per mg particle, which corresponds to 35 antibodies bound to an average sized MNP (54 nm in diameter). The human IgG functionalized MNPs exhibit a high degree of specificity (approximately 90%) and retained a binding capacity of 32%. Using the same approach, streptavidin was coupled onto the MNPs and the biotin binding capacity was determined using biotinylated fluorescein. At maximum surface coverage, a biotin binding capacity of 1500 pmol/mg was obtained, corresponding to a streptavidin activity of 76%. On the other hand, by introducing PEG functions the non-specific adsorption of serum proteins could be significantly suppressed down to approximately 3 microg/mg. We conclude that self-assembly of silane films creates a generic platform for the controlled interactions of MNPs with biomolecules.