Acetone and water on TiO2(110): competition for sites

Inverse Volcano: A New Molecule-Surface Interaction Phenomenon

Explosive desorption of guest molecules embedded in amorphous solid water upon its crystallization is known as the "molecular volcano." Here, we describe an abrupt ejection of NH_{3} guest molecules from various molecular host films toward a Ru(0001) substrate upon heating, utilizing both temperature programmed contact potential difference and temperature programmed desorption measurements. NH_{3} molecules abruptly migrate toward the substrate due to either crystallization or desorption of the host molecules, following an "inverse volcano" process considered a highly probable phenomenon for dipolar guest molecules that strongly interact with the substrate.

Elucidating the Cooperative Roles of Water and Lewis Acid-Base Pairs in Cascade C-C Coupling and Self-Deoxygenation Reactions

Water plays pivotal roles in tailoring reaction pathways in many important reactions, including cascade C-C bond formation and oxygen elimination. Herein, a kinetic study combined with complementary analyses (DRIFTS, isotopic study, ¹H solid-state magic angle spinning nuclear magnetic resonance) and density functional theory (DFT) calculations are performed to elucidate the roles of water in cascade acetone-to-isobutene reactions on a Zn _x Zr _y O _z mixed metal oxide with balanced Lewis acid-base pairs. Our results reveal that the reaction follows the acetone-diacetone alcohol-isobutene pathway. Isobutene is produced through an intramolecular rearrangement of the eight-membered ring intermediate formed via the adsorption of diacetone alcohol on the Lewis acid-base pairs in the presence of cofed water. OH adspecies, formed by the dissociative adsorption of water on the catalyst surface, were found to distort diacetone alcohol's hydroxyl functional group toward its carbonyl functional group and facilitate the intramolecular rearrangement of diacetone alcohol to form isobutene. In the absence of water, diacetone alcohol binds strongly to the Lewis acid site, e.g., at a Zr⁴⁺ site, via its carbonyl functional group, leading to its dramatic structural distortion and further dehydration reaction to form mesityl oxide as well as subsequent polymerization reactions and the formation of coke. The present results provide insights into the cooperative roles of water and Lewis acid-base pairs in catalytic upgrading of biomass to fuels and chemicals.

Breath Acetone Sensing Based on Single-Walled Carbon Nanotube-Titanium Dioxide Hybrids Enabled by a Custom-Built Dehumidifier

Acetone is a metabolic byproduct found in the exhaled breath and can be measured to monitor the metabolic degree of ketosis. In this state, the body uses free fatty acids as its main source of fuel because there is limited access to glucose. Monitoring ketosis is important for type I diabetes patients to prevent ketoacidosis, a potentially fatal condition, and individuals adjusting to a low-carbohydrate diet. Here, we demonstrate that a chemiresistor fabricated from oxidized single-walled carbon nanotubes functionalized with titanium dioxide (SWCNT@TiO₂) can be used to detect acetone in dried breath samples. Initially, due to the high cross sensitivity of the acetone sensor to water vapor, the acetone sensor was unable to detect acetone in humid gas samples. To resolve this cross-sensitivity issue, a dehumidifier was designed and fabricated to dehydrate the breath samples. Sensor response to the acetone in dried breath samples from three volunteers was shown to be linearly correlated with the two other ketone bodies, acetoacetic acid in urine and β-hydroxybutyric acid in the blood. The breath sampling and analysis methodology had a calculated acetone detection limit of 1.6 ppm and capable of detecting up to at least 100 ppm of acetone, which is the dynamic range of breath acetone for someone with ketosis. Finally, the application of the sensor as a breath acetone detector was studied by incorporating the sensor into a handheld prototype breathalyzer.

IR spectroscopic investigations of chemical and photochemical reactions on metal oxides: bridging the materials gap

In this review, we highlight recent progress (2008–2016) in infrared reflection absorption spectroscopy (IRRAS) studies on oxide powders achieved by using different types of metal oxide single crystals as reference systems.

Elementary photocatalytic chemistry on TiO2surfaces

In this article, we review the recent advances in the photoreactions of small molecules with model TiO₂surfaces, and propose a photocatalytical model based on nonadiabatic dynamics and ground state surface reactions.

Production of phenolics via photocatalysis of ball milled lignin–TiO2 mixtures in aqueous suspension

This work demonstrates the production of value added phenolics and aromatics via UV photocatalysis of lignin–TiO₂ mixtures prepared by wet ball milling using different solvents.

On the role of gold nanoparticles in the selective photooxidation of 2-propanol over Au/TiO2

Partial insight into the reaction mechanism of the photooxidation of 2-propanol over Au/TiO₂. 2-Propanol is activated by hole capture and converted to acetone requiring the presence of O₂ as an electron acceptor. The deposited Au nanoparticles are assumed to facilitate the electron transfer from the TiO₂ conduction band to adsorbed O₂.

Site competition during coadsorption of acetone with methanol and water on TiO2(110)

The competitive interaction between acetone and two solvent molecules (methanol and water) for surface sites on rutile TiO(2)(110) was studied using temperature-programmed desorption (TPD). On a vacuum-annealed TiO(2)(110) surface, which possessed ~5% oxygen vacancy sites, excess methanol displaced preadsorbed acetone molecules to weakly bound and physisorbed desorption states below 200 K. In contrast, acetone molecules were stabilized on an oxidized surface against displacement by methanol through formation of acetone diolate species. The behavior of acetone with methanol differs from the interactions between acetone and water which are less competitive. Examination of acetone + methanol and acetone + water multilayer combinations shows that acetone is more compatible in water-ice films than in methanol-ice films, presumably because water has greater potential as a hydrogen-bond donor than does methanol. Acetone molecules displaced from the TiO(2)(110) surface by water are more likely to be retained in the near-surface region, in turn having a greater opportunity to revisit the surface, than when methanol is used as a coadsorbate.

Ethanol photo-oxidation on a rutile TiO2(110) single crystal surface

The reaction of ethanol has been studied on the surface of rutile TiO(2)(110) by Temperature Programmed Desorption (TPD), online mass spectrometry under UV excitation and photoelectron spectroscopy while the adsorption energies of the molecular and dissociative modes of ethanol were computed using the DFT/GGA method. The most stable configuration is the dissociative adsorption in line with experimental results at room temperature. At 0.5 ML coverage the adsorption energy was found equal to 80 kJ mol(-1) for the dissociative mode (ethoxide, CH(3)CH(2)O(a) + H(a)) followed by the molecular mode (67 kJ mol(-1)). The orientation of the ethoxides along the [001] or [110] direction had minor effect on the adsorption energy although affected differently the Ti and O surface atomic positions. TPD after ethanol adsorption at 300 K indicated two main reactions: dehydration to ethylene and dehydrogenation to acetaldehyde. Pre-dosing the surface with ethanol at 300 K followed by exposure to UV resulted in the formation of acetaldehyde and hydrogen. The amount of acetaldehyde could be directly linked to the presence of gas phase O(2) in the vacuum chamber. The order of this photo-catalytic reaction with respect to O(2) was found to be 0.5. Part of acetaldehyde further reacted with O(2) under UV excitation to give surface acetate species. Because the rate of photo-oxidation of acetates (acetic acid) was slower than that of ethoxides (ethanol), the surface ended up by being covered with large amounts of acetates. A reaction mechanism for acetaldehyde, hydrogen and acetate formation under UV excitation is proposed.

Photoreaction of the rutile TiO2(011) single-crystal surface: reaction with acetic acid

The reaction of acetic acid with stoichiometric and reduced rutile TiO(2)(011) single-crystal surfaces has been studied under dark and UV illumination conditions. The surface coverage after the dissociative adsorption of acetic acid with respect to Ti was found to be 0.55. Monitoring XPS Ti, O, and C lines revealed that the surface population decreased incrementally with temperature up to 650 K. The decrease in the slope of both the -CH(3)- and -COO- XPS peaks was not monotonic and followed two slopes in agreement with TPD results. The first channel involves the removal of surface acetates to acetic acid by recombinative desorption, and the second mainly involves dehydration to ketene. UV-light illumination was conducted at 300 K in the absence and presence of molecular oxygen at different pressures: in the 10(-6)-10(-9) Torr range. Acetate species were found to decrease with illumination time, and their decrease is seen to be dependent on the oxygen pressure. Plausible decomposition pathways are presented. Deliberately reducing the surface by electron bombardment prior to the adsorption of acetic acid did not affect the photoreaction rate within the experimental limits.

Photooxidation of Acetone on TiO2(110): Conversion to Acetate via Methyl Radical Ejection

It is generally held that radicals form and participate in heterogeneous photocatalytic processes on oxide surfaces, although understanding the mechanistic origins and fates of such species is difficult. In this study, photodesorption and thermal desorption techniques show that acetone is converted into acetate on the surface of TiO2(110) in a two-step process that involves, first, a thermal reaction between acetone and coadsorbed oxygen to make a surface acetone-oxygen complex, followed second by a photocatalytic reaction that ejects a methyl radical from the surface and converts the acetone-oxygen complex into acetate. Designation of the photodesorption species to methyl radicals was confirmed using isotopically labeled acetone. The yield of photodesorbed methyl radicals correlates well with the amount of acetone depleted and with the yield of acetate left on the surface, both gauged using postirradiation temperature programmed desorption (TPD). The thermal reaction between adsorbed acetone and oxygen to form the acetone-oxygen complex exhibits an approximate activation barrier of about 10 kJ/mol. A prerequisite to this reaction is the presence of surface Ti3+ sites that enable O2 adsorption. Creation of these sites by vacuum reduction of the surface prior to acetone and oxygen coadsorption results in an initial spike in the acetone photooxidation rate, but replenishment of these sites by photolytic means (i.e., by trapping excited electrons at the surface) appears to be a slow step in a sustained reaction. Evidence in this study for the ejection of organic radicals from the surface during photooxidation catalysis on TiO2 provides support for mechanistic pathways that involve both adsorbed and nonadsorbed species.