Preparation and encapsulation of highly fluorescent conjugated polymer nanoparticles

Surfactant-Free Preparation of Conjugated Polymer Nanoparticles in Aqueous Dispersions Using Sulfate Functionalized Fluorene Monomers

Conjugated polymer nanoparticles (CPNs) can be synthesized by a Suzuki-Miyaura cross-coupling miniemulsion polymerization to give stable dispersions with a high concentration of uniform nanoparticles. However, large amounts of added surfactants are required to stabilize the miniemulsion and prevent the aggregation of the nanoparticles. Removal of the excess surfactant is challenging, and residual surfactant in thin films deposited from these dispersions can reduce the performance of optoelectronic devices. We report a novel approach to prepare stable dispersions with no added surfactant using a fluorene monomer, 2,7-dibromo-9,9-bis(undecanesulfate)-9H-fluorene, with alkyl side chains terminated by negatively charged sulfate groups. This functionality mimics the structure of one of the most commonly used surfactants, sodium dodecyl sulfate (SDS). This charged monomer effectively stabilizes the miniemulsion through electrostatic repulsion without the use of any additional surfactant in molar ratios ranging from 2.0 to 20.0 mol % of total monomer content for the preparation of poly(9,9-dioctylfluorene) (PFO) and poly(9,9-dioctylfluorene-alt-bithiophene) (PF8T2). Incorporation of 5.0 mol % of the amphiphilic monomer gave stable dispersions with a surface potential below -40 mV and, and polymers with molar mass (Mn) above 10 kg mol-1. This method should be generally applicable to the preparation of dispersions of polyfluorenes for application in organic electronic and optoelectronic devices without the requirement for time-consuming processes to remove residual surfactant.

Deep Red Light Driven Hydrogen Evolution by Heterojunction Polymer Dots for Diabetic Wound Healing

We describe small heterojunction polymer dots (Pdots) with deep-red light catalyzed H2 generation for diabetic skin wound healing. The Pdots with donor/acceptor heterojunctions showed remarkably enhanced photocatalytic activity as compared to the donor or acceptor nanoparticles alone. We encapsulate the Pdots and ascorbic acid into liposomes to form Lipo-Pdots nanoreactors, which selectively scavenge ⋅OH radicals in live cells and tissues under 650 nm light illumination. The antioxidant capacity of the heterojunction Pdots is ~10 times higher than that of the single-component Pdots described previously. Under a total light dose of 360 J/cm2, the Lipo-Pdots nanoreactors effectively scavenged ⋅OH radicals and suppressed the expression of pro-inflammatory cytokines in skin tissues, thereby accelerating the healing of skin wounds in diabetic mice. This study provides a feasible solution for safe and effective treatment of diabetic foot ulcers.

Semiconducting polymer dots for multifunctional integrated nanomedicine carriers

The expansion applications of semiconducting polymer dots (Pdots) among optical nanomaterial field have long posed a challenge for researchers, promoting their intelligent application in multifunctional nano-imaging systems and integrated nanomedicine carriers for diagnosis and treatment. Despite notable progress, several inadequacies still persist in the field of Pdots, including the development of simplified near-infrared (NIR) optical nanoprobes, elucidation of their inherent biological behavior, and integration of information processing and nanotechnology into biomedical applications. This review aims to comprehensively elucidate the current status of Pdots as a classical nanophotonic material by discussing its advantages and limitations in terms of biocompatibility, adaptability to microenvironments in vivo, etc. Multifunctional integration and surface chemistry play crucial roles in realizing the intelligent application of Pdots. Information visualization based on their optical and physicochemical properties is pivotal for achieving detection, sensing, and labeling probes. Therefore, we have refined the underlying mechanisms and constructed multiple comprehensive original mechanism summaries to establish a benchmark. Additionally, we have explored the cross-linking interactions between Pdots and nanomedicine, potential yet complete biological metabolic pathways, future research directions, and innovative solutions for integrating diagnosis and treatment strategies. This review presents the possible expectations and valuable insights for advancing Pdots, specifically from chemical, medical, and photophysical practitioners' standpoints.

Recent Advances in and Application of Fluorescent Microspheres for Multiple Nucleic Acid Detection

Traditional single nucleic acid assays can only detect one target while multiple nucleic acid assays can detect multiple targets simultaneously, providing comprehensive and accurate information. Fluorescent microspheres in multiplexed nucleic acid detection offer high sensitivity, specificity, multiplexing, flexibility, and scalability advantages, enabling precise, real-time results and supporting clinical diagnosis and research. However, multiplexed assays face challenges like complexity, costs, and sample handling issues. The review explores the recent advancements and applications of fluorescent microspheres in multiple nucleic acid detection. It discusses the versatility of fluorescent microspheres in various fields, such as disease diagnosis, drug screening, and personalized medicine. The review highlights the possibility of adjusting the performance of fluorescent microspheres by modifying concentrations and carrier forms, allowing for tailored applications. It emphasizes the potential of fluorescent microsphere technology in revolutionizing nucleic acid detection and advancing health, disease treatment, and medical research.

The Soft Nanodots as Fluorescent Probes for Cell Imaging: Analysis of Cell and Spheroid Penetration Behavior of Single Chain Polymer Dots

This study describes the formation, size control, and penetration behavior of polymer nanodots (Pdots) consisting of single or few chain polythiophene-based conjugated polyelectrolytes (CPEs) via nanophase separation between good solvent and poor solvent of CPE. Though the chain singularity may be associated with dilution nanophase separation suggests that molecules of a good solvent create a thermodynamically driven solvation layer surrounding the CPEs and thereby separating the single chains even in their poor solvents. This statement is therefore corroborated with emission intensity/lifetime, particle size, and scattering intensity of polyelectrolyte in good and poor solvents. Regarding the augmented features, Pdots are implemented into cell imaging studies to understand the nuclear penetration and to differentiate the invasive characteristics of breast cancer cells. The python based red, green, blue (RGB) color analysis   depicts that Pdots have more nuclear penetration ability in triple negative breast cancer cells due to the different nuclear morphology in shape and composition and Pdots have penetrated cell membrane as well as extracellular matrix in spheroid models. The current Pdot protocol and its utilization in cancer cell imaging are holding great promise for gene/drug delivery to target cancer cells by explicitly achieving the very first priority of nuclear intake.

Electronic effects of conjugated aryl groups on the properties and reactivities of di(arylethynyl)tetracenes

The photochemical oxidations of acenes can cause challenges with their optoelectronic applications, such as singlet fission and organic transistors. At the same time, these reactions form the basis for many luminescent sensing schemes for 1O2. While diethynyl substitution is arguably the most widely adopted of the various substitution strategies to control oxidation and also improve solubility and processability of long acenes, the extent to which differences between the alkyne groups can influence key properties of long acenes remains largely unknown. This report therefore describes the effects of various arenes and heteroarenes on the electronic structures, optical properites, and reactivity with singlet oxygen for eight 5,12-di(arylethynyl)tetracenes. The fluorescence spectra of these tetracenes span approximately 100 nm, while their observed rate constants for reaction with singlet oxygen correlates strongly with the HOMO level, spanning one order of magnitude. They are also amenable to fluorescent materials that respond ratiometrically to singlet oxygen. Therefore, electronic effects of groups directly conjugated to ethynylacenes offer a useful chemical space for rational acene design.

Semiconducting Polymer Dots Directly Stabilized with Serum Albumin: Preparation, Characterization, and Cellular Immunolabeling

Semiconducting polymer dots (Pdots) are brightly fluorescent nanoparticles of growing interest for bioanalysis and imaging. A recurring challenge with these materials is obtaining robust physical and colloidal stability and low nonspecific binding. Here, we prepared and characterized Pdots with bovine serum albumin (BSA) as the stabilizing agent (BSA-Pdots) instead of a more conventionally used amphiphilic polymer, both without and with cross-linking of the protein using glutaraldehyde (BSA(GA)-Pdots) or disuccinimidyl glutarate. Characterization included fluorescence properties; colloidal stability as a function of pH, ionic strength, and solvent perturbation; shape retention and hardness; and nonspecific binding with common assay substrates, fixed cells, and live cells. These properties were contrasted with the same properties for amphiphilic polymer-stabilized Pdots and silica-coated Pdots. On balance, the BSA-stabilized Pdots were similar or more favorable in their properties, with BSA(GA)-Pdots being especially advantageous. Bioconjugation of the BSA-stabilized Pdots was possible using amine-reactive active-ester chemistry, including biotinylation and bioorthogonal functionalization for immunoconjugation via tetrazine-strained-alkene click chemistry. These approaches were used for selective fluorescent labeling of cells based on ligand-receptor and antibody-antigen binding, respectively. Overall, direct BSA stabilization is a very promising strategy for preparing Pdots with improved physical and colloidal stability, reduced nonspecific interactions, and utility for in vitro diagnostics and other bioanalyses and imaging.

Making the connections: physical and electric interactions in biohybrid photosynthetic systems

Biohybrid photosynthesis systems, which combine biological and non-biological materials, have attracted recent interest in solar-to-chemical energy conversion. However, the solar efficiencies of such systems remain low, despite advances in both artificial photosynthesis and synthetic biology. Here we discuss the potential of conjugated organic materials as photosensitisers for biological hybrid systems compared to traditional inorganic semiconductors. Organic materials offer the ability to tune both photophysical properties and the specific physicochemical interactions between the photosensitiser and biological cells, thus improving stability and charge transfer. We highlight the state-of-the-art and opportunities for new approaches in designing new biohybrid systems. This perspective also summarises the current understanding of the underlying electron transport process and highlights the research areas that need to be pursued to underpin the development of hybrid photosynthesis systems.

Near-Infrared II Semiconducting Polymer Dots: Chain Packing Modulation and High-Contrast Vascular Imaging in Deep Tissues

Fluorescence imaging in the second near-infrared (NIR-II) window has attracted considerable interest in investigations of vascular structure and angiogenesis, providing valuable information for the precise diagnosis of early stage diseases. However, it remains challenging to image small blood vessels in deep tissues because of the strong photon scattering and low fluorescence brightness of the fluorophores. Here, we describe our combined efforts in both fluorescent probe design and image algorithm development for high-contrast vascular imaging in deep turbid tissues such as mouse and rat brains with intact skull. First, we use a polymer blending strategy to modulate the chain packing behavior of the large, rigid, NIR-II semiconducting polymers to produce compact and bright polymer dots (Pdots), a prerequisite for in vivo fluorescence imaging of small blood vessels. We further developed a robust Hessian matrix method to enhance the image contrast of vascular structures, particularly the small and weakly fluorescent vessels. The enhanced vascular images obtained in whole-body mouse imaging exhibit more than an order of magnitude improvement in the signal-to-background ratio (SBR) as compared to the original images. Taking advantage of the bright Pdots and Hessian matrix method, we finally performed through-skull NIR-II fluorescence imaging and obtained a high-contrast cerebral vasculature in both mouse and rat models bearing brain tumors. This study in Pdot probe development and imaging algorithm enhancement provides a promising approach for NIR-II fluorescence vascular imaging of deep turbid tissues.

Amplification of Cerenkov luminescence using semiconducting polymers for cancer theranostics

The therapeutic efficacy of photodynamic therapy is limited by the ability of light to penetrate tissues. Due to this limitation, Cerenkov luminescence (CL) from radionuclides has recently been proposed as an alternative light source in a strategy referred to as Cerenkov radiation induced therapy (CRIT). Semiconducting polymer nanoparticles (SPNs) have ideal optical properties, such as large absorption cross-sections and broad absorbance, which can be utilized to harness the relatively weak CL produced by radionuclides. SPNs can be doped with photosensitizers and have nearly 100% energy transfer efficiency by multiple energy transfer mechanisms. Herein, we investigated an optimized photosensitizer doped SPN as a nanosystem to harness and amplify CL for cancer theranostics. We found that semiconducting polymers significantly amplified CL energy transfer efficiency. Bimodal PET and optical imaging studies showed high tumor uptake and retention of the optimized SPNs when administered intravenously or intratumorally. Lastly, we found that photosensitizer doped SPNs have excellent potential as a cancer theranostics nanosystem in an in vivo tumor therapy study. Our study shows that SPNs are ideally suited to harness and amplify CL for cancer theranostics, which may provide a significant advancement for CRIT that are unabated by tissue penetration limits.

EGFR-targeted semiconducting polymer nanoparticles for photoacoustic imaging

Semiconducting polymer nanoparticles (SPN), formulated from organic semiconducting polymers and lipids, show promise as exogenous contrast agents for photoacoustic imaging (PAI). To fully realise the potential of this class of nanoparticles for imaging and therapeutic applications, a broad range of active targeting strategies, where ligands specific to receptors on the target cells are displayed on the SPN surface, are urgently needed. In addition, effective strategies for quantifying the level of surface modification are also needed to support development of ligand-targeted SPN. In this paper, we have developed methods to prepare SPN bearing peptides targeted to Epidermal Growth Factor Receptors (EGFR), which are overexpressed at the surface of a wide variety of cancer cell types. In addition to fully characterising these targeted nanoparticles by standard methods (UV-visible, photoacoustic absorption, dynamic light scattering, zeta potential and SEM), we have developed a powerful new NMR method to determine the degree of conjugation and the number of targeting peptides attached to the SPN. Preliminary in vitro experiments with the colorectal cancer cell line LIM1215 indicated that the EGFR-targeting peptide conjugated SPN were either ineffective in delivering the SPN to the cells, or that the targeting peptide itself destabilised the formulation. This in reinforces the need for effective characterisation techniques to measure the surface accessibility of targeting ligands attached to nanoparticles.

Conjugated Polymeric Materials in Biological Imaging and Cancer Therapy

Conjugated polymers (CPs) have attracted much attention in the fields of chemistry, medicine, life science, and material science. Researchers have carried out a series of innovative researches and have made significant research progress regarding the unique photochemical and photophysical properties of CPs, expanding the application range of polymers. CPs are polymers formed by the conjugation of multiple repeating light-emitting units. Through precise control of their structure, functional molecules with different properties can be obtained. Fluorescence probes with different absorption and emission wavelengths can be obtained by changing the main chain structure. By modifying the side chain structure with water-soluble groups or selective recognition molecules, electrostatic interaction or specific binding with specific targets can be achieved; subsequently, the purpose of selective recognition can be achieved. This article reviews the research work of CPs in cell imaging, tumor diagnosis, and treatment in recent years, summarizes the latest progress in the application of CPs in imaging, tumor diagnosis, and treatment, and discusses the future development direction of CPs in cell imaging, tumor diagnosis, and treatment.

Polydots, soft nanoparticles, at membrane interfaces

Soft nanoparticles (NPs) are emerging candidates for nano medicine, particularly for intercellular imaging and targeted drug delivery. Their soft nature, manifested in their dynamics, allows translocation into organisms without damaging their membranes. A crucial step towards incorporating soft dynamic NPs in nano medicine, is to resolve their interrelation with membranes. Here using atomistic molecular dynamics (MD) simulations we probe the interaction of soft NPs formed by conjugated polymers with a model membrane. These NPs, often termed polydots, are confined to their nano dimensions without any chemical tethers, forming dynamic long lived nano structures. Specifically, polydots formed by dialkyl para poly phenylene ethylene (PPE), with a varying number of carboxylate groups tethered to the alkyl chains to tune the interfacial charge of the surface of the NP are investigated at the interface with a model membrane that consists of di-palmitoyl phosphatidylcholine (DPPC). We find that even though polydots are controlled only by physical forces, they retain their NP configuration as they transcend the membrane. Regardless of their size, neutral polydots spontaneously penetrate the membrane whereas carboxylated polydots must be driven in, with a force that depends on the charge at their interface, all without significant disruption to the membrane. These fundamental results provide a means to control the position of the nanoparticles with respect to the membrane interfaces, which is key to their therapeutic use.

NIR-II Absorbing Conjugated Polymer Nanotheranostics for Thermal Initiated NO Enhanced Photothermal Therapy

Photothermal therapy (PTT) has received constant attention as a promising cancer treatment. However, PTT-induced inflammation can limit its effectiveness. To address this shortcoming, we developed second near-infrared (NIR-II) light-activated nanotheranostics (CPNPBs), which include a thermosensitive nitric oxide (NO) donor (BNN6) to enhance PTT. Under a 1064 nm laser irradiation, the conjugated polymer in CPNPBs serves as a photothermal agent for photothermal conversion, and the generated heat triggers the decomposition of BNN6 to release NO. The combination of hyperthermia and NO generation under single NIR-II laser irradiation allows enhanced thermal ablation of tumors. Consequently, CPNPBs can be exploited as potential candidates for NO-enhanced PTT, holding great promise for their clinical translational development.

Ultratrace PFAS Detection Using Amplifying Fluorescent Polymers

Per- and poly(fluoroalkyl) substances (PFAS) are environmentally persistent pollutants that are of growing concern due to their detrimental effects at ultratrace concentrations (ng·L^-1) in human and environmental health. Suitable technologies for on-site ultratrace detection of PFAS do not exist and current methods require complex and specialized equipment, making the monitoring of PFAS in distributed water infrastructures extremely challenging. Herein, we describe amplifying fluorescent polymers (AFPs) that can selectively detect perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) at concentrations of ng·L^-1. The AFPs are highly fluorinated and have poly(p-phenylene ethynylene) and polyfluorene backbones bearing pyridine-based selectors that react with acidic PFAS via a proton-transfer reaction. The fluorinated regions within the polymers partition PFAS into polymers, whereas the protonated pyridine units create lower-energy traps for the excitons, and emission from these pyridinium sites results in red-shifting of the fluorescence spectra. The AFPs are evaluated in thin-film and nanoparticle forms and can selectively detect PFAS concentrations of ∼1 ppb and ∼100 ppt, respectively. Both polymer films and nanoparticles are not affected by the type of water, and similar responses to PFAS were found in milliQ water, DI water, and well water. These results demonstrate a promising sensing approach for on-site detection of aqueous PFAS in the ng·L^-1 range.

Design, Synthesis, and Biomedical Application of Multifunctional Fluorescent Polymer Nanomaterials

Luminescent polymer nanomaterials not only have the characteristics of various types of luminescent functional materials and a wide range of applications, but also have the characteristics of good biocompatibility and easy functionalization of polymer nanomaterials. They are widely used in biomedical fields such as bioimaging, biosensing, and drug delivery. Designing and constructing new controllable synthesis methods for multifunctional fluorescent polymer nanomaterials with good water solubility and excellent biocompatibility is of great significance. Exploring efficient functionalization methods for luminescent materials is still one of the core issues in the design and development of new fluorescent materials. With this in mind, this review first introduces the structures, properties, and synthetic methods regarding fluorescent polymeric nanomaterials. Then, the functionalization strategies of fluorescent polymer nanomaterials are summarized. In addition, the research progress of multifunctional fluorescent polymer nanomaterials for bioimaging is also discussed. Finally, the synthesis, development, and application fields of fluorescent polymeric nanomaterials, as well as the challenges and opportunities of structure-property correlations, are comprehensively summarized and the corresponding perspectives are well illustrated.

Semiconducting Polymer Nanoparticles-Manganese Based Chemiluminescent Platform for Determining Total Antioxidant Capacity in Diabetic Mice

The total antioxidant capacity (TAC) is a key indicator of the body's resistance to oxidative stress injury in diabetic patients. The measurement of TAC is important for effectively evaluating the redox state to prevent and control the occurrence of diabetes complications. However, there is a lack of a simple, convenient, and reliable method to detect the total antioxidant capacity in diabetes. Herein, we design a novel chemiluminescent platform based on semiconducting polymer nanoparticles-manganese (SPNs-Mn^VII) to detect the total antioxidant capacity of urine in diabetic mice. We synthesize semiconducting polymer nanoparticles with four different structures and discover the ability of Mn^VII to produce singlet oxygen (¹O₂) that is employed to excite thiophene-based SPNs (PFODBT) to emit near-infrared chemiluminescence. Notably, the chemiluminescent intensity has a good linear relationship with the concentration of Mn^VII (detection limit: 2.8 μM). Because antioxidants (e.g., glutathione or ascorbic acid) can react with Mn^VII, such a chemiluminescent tool of SPNs (PFODBT)-Mn^VII can detect the glutathione or ascorbic acid with a larger responsive range. Furthermore, the total antioxidant capacity of urine from mice is evaluated via SPNs (PFODBT)-Mn^VII, and there are statistically significant differences between diabetic and healthy mice. Thus, this new chemiluminescent platform of SPNs (PFODBT)-Mn^VII is convenient, efficient, and sensitive, which is promising for monitoring antioxidant therapy of diabetes.

A novel donor-acceptor structured diketopyrrolopyrrole-based conjugated polymer synthesized by direct arylation polycondensation (DArP) for highly efficient antimicrobial photothermal therapy

A novel donor (D)-acceptor (A) structured conjugated polymer (PDPP-TP), which contains two alternating D-A pairs, namely thiophene (T)-diketopyrrolopyrrole (DPP) and thiophenen (T)-thieno[3,4-b]pyrazine (TP) along the main chain of the polymer, was synthesized by direct arylation polycondensation (DArP) for a highly efficient photothermal antibacterial treatment. The hydrophilic PDPP-TP-based nanoparticles (PTNPs) with a hydration diameter of about 120 nm were obtained by self-assembly using DSPE-mPEG₂₀₀₀ as the polymer matrix. PTNPs show strong near-infrared (NIR) absorbance with a λ_max at 910 nm (ε = 2.25 × 10⁴ L mol^-1 cm^-1) and NIR light-triggered photoactivity with a high photothermal conversion efficiency (PTCE) of 52.8% under 880 nm laser irradiation. Keeping the merits of excellent biocompatibility and photostability, PTNPs exhibited remarkable bacterial inhibition efficiency of almost 100% against Gram-negative E. coli and Gram-positive S. aureus with the help of an 880 nm laser (0.7 W cm^-2, 6 min), demonstrating its great potential as photothermal materials with a broad spectrum of activity for the effective treatment of microbial infections.

Semiconducting Polymer Dots for Point-of-Care Biosensing and In Vivo Bioimaging: A Concise Review

In recent years, semiconducting polymer dots (Pdots) have attracted much attention due to their excellent photophysical properties and applicability, such as large absorption cross section, high brightness, tunable fluorescence emission, excellent photostability, good biocompatibility, facile modification and regulation. Therefore, Pdots have been widely used in various types of sensing and imaging in biological medicine. More importantly, the recent development of Pdots for point-of-care biosensing and in vivo imaging has emerged as a promising class of optical diagnostic technologies for clinical applications. In this review, we briefly outline strategies for the preparation and modification of Pdots and summarize the recent progress in the development of Pdots-based optical probes for analytical detection and biomedical imaging. Finally, challenges and future developments of Pdots for biomedical applications are given.

Biocompatible Magnetic Conjugated Polymer Nanoparticles for Optical and Lifetime Imaging Applications in the First Biological Window

Conjugated polymers are organic semiconductors that can be used for fluorescence microscopy of living specimens. Here, we report the encapsulation of the bright-red-emitting conjugated polymer, poly[{9,9-dihexyl-2,7-bis(1-cyanovinylene)fluorenylene}-alt-co-{2,5-bis(N,N'-diphenylamino)-1,4-phenylene}] (CN-FO-DPD), and superparamagnetic iron oxide nanoparticles (SPIONs) within poly(styrene-co-maleic anhydride) (PSMA) micelles. The resulting particles exhibited an emission peak at 657 nm, a fluorescence quantum yield of 21%, an average diameter of 65 nm, and a ζ potential of -30 mV. They are taken up by cells, and we describe their use in fluorescence microscopy of living Hela cells and zebrafish embryos and their associated cytotoxicity in HEK, HeLa, and HCE cells.

Semiconducting polymer dots as fluorescent probes for in vitro biosensing

Semiconducting polymer dots (Pdots) have emerged as novel fluorescent probes with excellent characteristics, such as ultrahigh molar extinction coefficient, easy tunable absorption and emission bands, high brightness, and excellent photostability. Combined with good biocompatibility properties, much effort has been devoted to Pdots for in vivo biological imaging and therapy applications, such as deep-tissue fluorescent imaging, photodynamic therapy, photothermal therapy, and nanocarriers of genes or chemical drugs. Many reviews have been presented in these fields. On the other hand, a large number of studies employing Pdots for in vitro biosensing applications have been reported during the past few years, and there are barely any relevant reports to summarize the progress in this area. Hence, it is necessary to review these studies to promote the comprehensive application of Pdots. Herein, we introduce the properties and functionalization of Pdots, and systematically summarize the progress in the in vitro applications of Pdots, including the detection of DNAs, microRNAs, proteins, enzymatic activity, and some biological small molecules and ions. Finally, we share our perspectives on the future direction of this field.

Fluorescent Nanoparticles for Super-Resolution Imaging

Super-resolution imaging techniques that overcome the diffraction limit of light have gained wide popularity for visualizing cellular structures with nanometric resolution. Following the pace of hardware developments, the availability of new fluorescent probes with superior properties is becoming ever more important. In this context, fluorescent nanoparticles (NPs) have attracted increasing attention as bright and photostable probes that address many shortcomings of traditional fluorescent probes. The use of NPs for super-resolution imaging is a recent development and this provides the focus for the current review. We give an overview of different super-resolution methods and discuss their demands on the properties of fluorescent NPs. We then review in detail the features, strengths, and weaknesses of each NP class to support these applications and provide examples from their utilization in various biological systems. Moreover, we provide an outlook on the future of the field and opportunities in material science for the development of probes for multiplexed subcellular imaging with nanometric resolution.

The effect of intermolecular electronic coupling on the exciton dynamics in perylene red nanoparticles

Understanding the transport mechanisms of electronic excitations in molecular systems is the basis for their application in light harvesting and opto-electronic devices. The exciton transfer properties depend pivotally on the intermolecular coupling and the latter on the supramolecular structure. In this work, organic nanoparticles of the perylene derivative Perylene Red are prepared with flash-precipitation under different conditions. We correlate their intermolecular couplings, optical spectra, quantum yields, emission lifetimes and their size and characterize their exciton dynamics upon excitation with ultrashort laser pulses by transient absorption spectroscopy. We find that the intermolecular coupling can be varied by changing the preparation conditions and thus the supramolecular structure. In contrast to the monomeric system, the generation of charge-transfer states is found after optical excitation of the nanoparticles. The time of the generation step is in the order of 100 ps and depends on the intermolecular coupling. The mobility of the originally excited excitons is determined from measurements with varying exciton density. To this end, we model the contribution of exciton-exciton annihilation to the exciton decay assuming three-dimensional incoherent diffusion. The extracted exciton diffusion constant of nanoparticles with stronger intermolecular coupling is found to be 0.17 nm2 ps-1 and thereby about ten times higher than in the particles with smaller coupling.

Threonine-Based Stimuli-Responsive Nanoparticles with Aggregation-Induced Emission-Type Fixed Cores for Detection of Amines in Aqueous Solutions

Stimuli-responsive polymeric nanoparticles (NPs) exhibit reversible changes in the dispersion or aggregation state in response to external stimuli. In this context, we designed and synthesized core-shell NPs with threonine-containing weak polyelectrolyte shells and fluorescent cross-linked cores, which are applicable for the detection of pH changes and amine compounds in aqueous solution. Stable and uniform NP(dTh) and NP(Fl), consisting of fluorescent symmetric diphenyl dithiophene (dTh) and diphenyl fluorene (Fl) cross-linked cores, were prepared by site-selective Suzuki coupling reactions in self-assembled block copolymer. NP(Fl) with the Fl unit in the core showed a high fluorescence intensity in different solvents, which is regarded as an aggregation-induced emission-type NP showing strong emission in aggregated states in the cross-linked core. Unimodal NPs were observed in water at different pH values, and the diameter of NP(Fl) changed from 122 (pH = 2) to 220 nm (pH = 11). Furthermore, pH-dependent changes of the fluorescence peak positions and intensities were detected, which may be due to the core aggregation derived from the deprotonation of the threonine-based shell fragment. Specific interactions between the threonine-based shell of NP(Fl) and amine compounds (triethylamine and p-phenylenediamine) resulted in fluorescence quenching, suggesting the feasibility of fluorescent amine detection.

Monitoring Clinical-Pathological Grading of Hepatocellular Carcinoma Using MicroRNA-Guided Semiconducting Polymer Dots

MicroRNAs (miRNAs) are a class of small, noncoding RNAs involved in nearly all genetic central dogma processes and human biological behavior, which also play a significant role in the pathological activity of tumors, such as gene transcription, protein translation, and exosome secretion. Therefore, through the navigation of certain specific miRNAs, we can trace the specific physiological processes or image some specific tissues. Designing and accurately positioning microRNA (miRNA)-sensitive fluorescent nanoprobes with benign specificity and recognition in cells or tissues are a challenging research field. To solve the difficulties, we introduce four semiconducting polymer dots (Pdots) as nanoprobes linked by specific miRNA antisense sequences for monitoring the pathological grading by the variation in miRNA expression. Based on the base pairing principle, these miRNA-sensitive Pdots could bind to specific miRNAs within the cancerous cells. As impacted by the background of different pathology gradings, the proportions of the four hepatocellular carcinoma (HCC)-specific miRNAs within the cancerous cell are different, and the pathological grading of the patient tissues can be determined by comparing the palette combinations. The short single-stranded RNA-functionalized Pdots, which have excellent microRNA sensitivity, are observed in an experimental cell model and a series of tissue specimens from HCC patients for the first time. Using the Förster (or fluorescence) resonance energy transfer (FRET) model of Pdots and Cy3dt tag to simulate in vivo miRNA detection, the superior sensitivity and specificity of these nanoprobes are verified. The interference of subjective factors in traditional single/bis-dye emission intensity detection is abandoned, and multiple label staining is used to enhance sensitivity further and reduce the false-positive rate. The feasibility exhibited by this novel staining method is verified in normal hepatocellular HCC cell lines and 16 frozen ultrathin tissue sections, which are employed to quantify pathological grading-related color presentation systems for clinical doctors and pathologists' use. The intelligently designed miRNA-guided Pdots will emerge as an ideal platform with promising biological imaging.

Long-Term In Vivo Glucose Monitoring by Polymer-Dot Transducer in an Injectable Hydrogel Implant

Optical sensors have attracted a great deal of interest for glucose detection. However, their practical applications for continuous glucose monitoring are still constrained by operational reliability in subcutaneous tissues. Here, we show an implantable hydrogel platform embedded with luminescent polymer dots (Pdots) for sensitive and long-term glucose monitoring. We use Pdot transducer in a polyacrylamide hydrogel matrix to construct an implantable platform. The hydrogel-Pdot transducer showed bright luminescence with ratiometric response to glucose changes. The in vitro and in vivo sensitivities of the hydrogel implant were enhanced by varying the enzyme concentration and injection volume. After implantation, the hydrogel with Pdot transducer remained at the implanted site without migration for 1 month and can be removed from the subcutaneous tissue for further analysis. Our results indicate that the hydrogel-Pdot platform maintains the intrinsic sensing property with excellent stability during 1 month implantation, while fibrous capsule formation on the implant in some cases needs to be solved for long-term continuous glucose monitoring.

Recent Advances in the Development and Applications of Conjugated Polymer dots

Conjugated polymer dots or semiconducting polymer nanoparticles (Pdots) are nanoparticles prepared based on organic polymers. Pdots have the advantages of lower cost, simple preparation process, good biocompatibility, excellent stability, easy...

Influence of lactide vs glycolide composition of poly (lactic-co-glycolic acid) polymers on encapsulation of hydrophobic molecules: molecular dynamics and formulation studies

The work demonstrates the preparation of PLGA (PLGA 50:50, PLGA 75:25) nanoparticles, to encapsulate a hydrophobic molecule (coumarin-6), using the microreactor-based continuous process. The formulations were characterized using dynamic light scattering and transmission electron microscopy to determine their size, homogeneity, zeta potential, and surface morphology. The resulting nanoparticles were safe to the CHO cells (≈80% cell survival), at the concentration of ≤600 µg/mL and were successfully taken up by the cells, as demonstrated using confocal microscopy. Moreover, imaging flow cytometry confirmed that the nanoparticles were internalized in 73.96% of the cells. Furthermore, molecular dynamics simulation and docking studies were carried out to explore the effect of polymer chain length of PLGA and lactide vs glycolide (LA:GA) ratio on their compatibility with the coumarin-6 molecules and to study the coiling and flexibility of PLGA in the presence of coumarin-6 molecules. Flory-Huggins interaction parameter (χ) was calculated for polymer chains of varying lengths and LA:GA ratio, with respect to coumarin-6. χ parameter increased with increase in polymer chain length, which indicated superior interaction of coumarin-6 with the smaller chains. Amongst all the polymeric systems, PLGA55 exhibited the strongest interaction with coumarin-6, for all the chain lengths, possibly because of their homogeneous spatial arrangements and superior binding energy. PLGA27 showed better compatibility compared to PLGA72 and PGA, whereas PLA-based polymers exhibited the least compatibility. Analysis of the radius of gyration of the polymer chains in the polymer-coumarin-6 complexes, at the end of molecular dynamics run, exhibited that the polymer chains displayed varying coiling behavior and flexibility, depending upon the relative concentrations of the polymer and coumarin-6. Factors like intra-chain interactions, spatial arrangement, inter-chain binding energies, and polymer-coumarin-6 compatibility also influenced the coiling and flexibility of polymer chains.

Second near-infrared photoactivatable biocompatible polymer nanoparticles for effective in vitro and in vivo cancer theranostics

Photoacoustic imaging (PAI)-guided photothermal therapy (PTT) has drawn considerable attention due to the deeper tissue penetration and higher maximum permissible exposure. However, current phototheranostic agents are greatly restricted by weak absorption in the second near-infrared (NIR-II, 1000-1700 nm) window, long-term toxicity, and poor photostability. In this report, novel organic NIR-II conjugated polymer nanoparticles (CPNs) based on narrow bandgap donor-acceptor BDT-TBZ polymers were developed for effective cancer PAI and PTT. Characterization data confirmed the high photothermal conversion efficiency, good photostability, excellent PAI performance, and superior biocompatibility of as-obtained CPNs. In addition, in vitro and in vivo tests demonstrated the efficient PTT effect of CPNs in ablating cancer cells and inhibiting tumor growth under 1064 nm laser irradiation. More importantly, the CPNs exhibited rapid clearance capability through the biliary pathway and negligible systematic toxicity. Thus, this work provides a novel organic theranostic nanoplatform for NIR-II PAI-guided PTT, which advances the future clinical translation of biocompatible and metabolizable conjugated nanomaterials in cancer diagnosis and therapy.

High-Throughput Counting and Superresolution Mapping of Tetraspanins on Exosomes Using a Single-Molecule Sensitive Flow Technique and Transistor-like Semiconducting Polymer Dots

A method for high-throughput counting and superresolution mapping of surface proteins on exosomes is described. The method combines a single-molecule sensitive flow technique and an adaptive superresolution imaging method. Exosomes stained with membrane dye and dye-conjugated antibodies were analyzed using a microfluidic platform at a flow rate of 100 exosome s-1 to determine size and protein copy number. Superresolution mapping was performed with exosomes labeled with novel transistor-like, semiconducting polymer dots (Pdots), which exhibit spontaneous blinking with <5 nm localization error and a broad range of optical-adjustable duty cycles. Based on the copy numbers extracted from the flow analysis, the switch-on frequency of the Pdots were finely adjusted so that structures of hundreds of exosomes were obtained within five minutes. The high throughput and high sensitivity of this method offer clear advantages for characterization of exosomes and similar biological vesicles.

Expansion Microscopy with Multifunctional Polymer Dots

Expansion microscopy (ExM) provides nanoscale resolution on conventional microscopes via physically enlarging specimens with swellable polyelectrolyte gels. However, challenges involving fluorophore degradation and dilution during sample expansion have yet to be overcome. Herein, sequential cellular targeting, gel anchoring, and high-fidelity fluorescence reported using multifunctional polymer dots (Pdots) designed for ExM applications are demonstrated. The impressive brightness of the Pdots facilitates multicolor ExM, thereby enabling visualization of a variety of subcellular structures and neuron synapses. The average fluorescence intensities of Pdots in ExM range from ≈3 to 6 times higher than those achieved using commercially available Alexa dyes. Moreover, the fluorescence brightness and optical fluctuation are significantly improved by a surfactant-containing expansion buffer, which enables further resolution enhancement via super-resolution optical fluctuation imaging (SOFI). The combination of ExM and SOFI allows subcellular structures of ≈30 nm to be resolved by conventional microscopes. These results highlight the immense potential of multifunctional Pdots for ExM-enhanced super-resolution imaging.

All-Conjugated Polymer Core-Shell and Core-Shell-Shell Particles with Tunable Emission Profiles and White Light Emission

Future applications of conjugated polymer particles (CPP) in medicine, organic photonics, and optoelectronics greatly depend on high performance and precisely adjustable optical properties of the particles. To meet these criteria, current particle systems often combine conjugated polymers with inorganic particles in core-shell geometries, extending the possible optical characteristics of CPP. However, current conjugated polymer particles are restricted to a single polymer phase composed of a distinct polymer or a polymer blend. Here, a synthetic toolbox is presented that enables the synthesis of monodisperse core-shell and core-shell-shell particles, which consist entirely of conjugated polymers but of different types in the core and the shells. Seeded and fed-batch dispersion polymerizations based on Suzuki-Miyaura-type cross-coupling are investigated. The different approaches allow accurate control over the created interface between the conjugated polymer phases and thus also over the energy transfer phenomena between them. This approach opens up completely new synthetic freedom for fine tuning of the optical properties of CPP, enabling, for example, the synthesis of individual white light-emitting particles.

Theranostic Near-Infrared-Active Conjugated Polymer Nanoparticles

Conjugated polymer nanoparticles (CPNs) based on a common solar cell material (PTB7) have been prepared, and their potential in theranostic applications based on bioimaging and photosensitizing capabilities has been evaluated. The main absorption and emission bands of the prepared CPNs both fell within the NIR-I (650-950 nm) transparency window, allowing facile and efficient implementation of our CPNs as bioimaging agents, as demonstrated in this work for A549 human lung cancer cell cultures. The prepared CPN samples were also shown to produce reactive oxygen species (ROS) upon photoexcitation in the near-infrared or ultraviolet spectral regions, both in aqueous solutions and in HaCaT keratinocyte cell cultures. Importantly, we show that the photosensitizing ability of our CPNs was largely determined by the nature of the stabilizing shell: coating the CPNs with a Pluronic F-127 copolymer led to an improvement of photoinitiated ROS production, while using poly[styrene-co-maleic anhydride] instead completely quenched said process. This work therefore demonstrates that the photosensitizing capability of CPNs can be modulated via an appropriate selection of stabilizing material and highlights the significance of this parameter for the on-demand design of theranostic probes based on CPNs.

Recent Developments in Semiconducting Polymer Dots for Analytical Detection and NIR-II Fluorescence Imaging

In recent years, semiconducting polymer dots (Pdots) have attracted enormous attention in applications from fundamental analytical detection to advanced deep-tissue bioimaging due to their ultrahigh fluorescence brightness with excellent photostability and minimal cytotoxicity. Pdots have therefore been widely adopted for a variety types of molecular sensing for analytical detection. More importantly, the recent development of Pdots for use in the optical window between 1000 and 1700 nm, popularly known as the "second near-infrared window" (NIR-II), has emerged as a class of optical transparent imaging technology in the living body. The advantages of the NIR-II region over the traditional NIR-I (700-900 nm) window in fluorescence imaging originate from the reduced autofluorescence, minimal absorption and scattering of light, and improved penetration depths to yield high spatiotemporal images for biological tissues. Herein, we discuss and summarize the recent developments of Pdots employed for analytical detection and NIR-II fluorescence imaging. Starting with their preparation, the recent developments for targeting various analytes are then highlighted. After that, the importance of and latest progress in NIR-II fluorescence imaging using Pdots are reported. Finally, perspectives and challenges associated with the emergence of Pdots in different fields are given.

Peptide-Engineered Fluorescent Nanomaterials: Structure Design, Function Tailoring, and Biomedical Applications

Fluorescent nanomaterials have exhibited promising applications in biomedical and tissue engineering fields. To improve the properties and expand bioapplications of fluorescent nanomaterials, various functionalization and biomodification strategies have been utilized to engineer the structure and function of fluorescent nanomaterials. Due to their high biocompatibility, satisfied bioactivity, unique biomimetic function, easy structural tailoring, and controlled self-assembly ability, supramolecular peptides are widely used as versatile modification agents and nanoscale building blocks for engineering fluorescent nanomaterials. In this work, recent advance in the synthesis, structure, function, and biomedical applications of peptide-engineered fluorescent nanomaterials is presented. Firstly, the types of different fluorescent nanomaterials are introduced. Then, potential strategies for the preparation of peptide-engineered fluorescent nanomaterials via templated synthesis, bioinspired conjugation, and peptide assembly-assisted synthesis are discussed. After that, the unique structure and functions through the peptide conjugation with fluorescent nanomaterials are demonstrated. Finally, the biomedical applications of peptide-engineered fluorescent nanomaterials in bioimaging, disease diagnostics and therapy, drug delivery, tissue engineering, antimicrobial test, and biosensing are presented and discussed in detail. It is helpful for readers to understand the peptide-based conjugation and bioinspired synthesis of fluorescent nanomaterials, and to design and synthesize novel hybrid bionanomaterials with special structures and improved functions for advanced applications.

Optimizing fluorophore density for single virus counting: a photophysical approach

In health and environmental research, it is often necessary to quantify the concentrations of single (bio) nanoparticles present at very low concentrations. Suitable quantification approaches that rely on counting and tracking of single fluorescently labelled (bio) nanoparticles are often challenging since fluorophore self-quenching limits the maximum particle brightness. Here we study how the number of labels per nanoparticle influences the total brightness of fluorescently labelled cowpea chlorotic mottle virus (CCMV). We analyze in detail the photophysical interplay between the fluorophores on the virus particles. We deduce that the formation of dark aggregates and energy transfer towards these aggregates limits the total particle brightness that can be achieved. We show that by carefully selecting the number of fluorescent labels per CCMV, and thus minimizing the negative effects on particle brightness, it is possible to quantify fluorescently labelled CCMV concentrations down to fM concentrations in single particle counting experiments.

Engineering fluorescent semiconducting polymer nanoparticles for biological applications and beyond

We summarize the recent advances in engineering approaches to obtain functionalized semiconducting polymer nanoparticles (SPNs) for biological applications. The challenges and outlook of fabricating functionalized SPNs are also provided.

Implications of relaxation dynamics of collapsed conjugated polymeric nanoparticles for light-harvesting applications

The mechanism of the formation of nanoparticles (collapsed state) from the extended state of polymers and their ultrafast excited state relaxation dynamics are illustrated.

Recent advances in semiconducting polymer dots as optical probes for biosensing

This review mainly summarized the recent results that used bright polymer dots (Pdots) for the detection of different analytes such as reactive oxygen species (ROS), metal ions, pH values, and a variety of biomolecules.

Dual-Mode Superresolution Imaging Using Charge Transfer Dynamics in Semiconducting Polymer Dots

In a conjugated polymer-based single-particle heterojunction, stochastic fluctuations of the photogenerated hole population lead to spontaneous fluorescence switching. We found that 405 nm irradiation can induce charge recombination and activate the single-particle emission. Based on these phenomena, we developed a novel class of semiconducting polymer dots that can operate in two superresolution imaging modes. The spontaneous switching mode offers efficient imaging of large areas, with <10 nm localization precision, while the photoactivation/deactivation mode offers slower imaging, with further improved localization precision (ca. 1 nm), showing advantages in resolving small structures that require high spatial resolution. Superresolution imaging of microtubules and clathrin-coated pits was demonstrated, under both modes. The excellent localization precision and versatile imaging options provided by these nanoparticles offer clear advantages for imaging of various biological systems.

Efficient suppression of amyloid-β peptide aggregation and cytotoxicity with photosensitive polymer nanodots

The deposition of amyloid plaques resulting from the aggregation of amyloid-β (Aβ) peptides is closely related to Alzheimer's disease (AD). With the development of various therapeutic methods, the oxidative modification of Aβ has emerged as a fascinating noninvasive photo-therapeutic intervention for treating AD by altering the Aβ aggregation tendency. Herein, we report the photo-triggered inhibition of Aβ aggregation and cytotoxicity by utilizing polymer nanodots (Pdots) modified with rose bengal (RB), methylene blue (MB), and riboflavin (RF). Experimental results demonstrate that these functionalized Pdots manifest a superior suppression effect on Aβ aggregation under irradiation. This can be attributed to the formation of reactive oxygen species (ROS) (i.e., singlet oxygen (¹O₂)), resulting in the oxygenation of Aβ and the change of Aβ aggregation tendency. Especially, RB-Pdots manifest better biocompatibility and higher ¹O₂ productivity. In a word, this hybridized nanostructure will provide a promising platform for the noninvasive photo-therapeutic treatment of AD in the future.

Red aggregation-induced emission luminogen and Gd3+ codoped mesoporous silica nanoparticles as dual-mode probes for fluorescent and magnetic resonance imaging

Fluorescence imaging and magnetic resonance imaging have been research hotspots for adjuvant therapy and diagnosis. However, traditional fluorescent probes or contrast agents possess insurmountable weaknesses. In this work, we reported the preparation of dual-mode probes based on mesoporous silica nanomaterials (MSNs), which were doped with an aggregation-induced emission (AIE) dye and Gd³⁺ through a direct sol-gel method. In this system, the obtained materials emitted strong red fluorescence, in which the maximum emission wavelength was located at 669 nm, and could be applied as effective fluorescence probes for fluorescence microscopy imaging. Furthermore, the introduction of Gd³⁺ made the nanoparticles effective contrast agents when applied in contrast-enhanced magnetic resonance (MR) imaging because they could improve the contrast of MR imaging. The excellent biocompatibility of these nanoparticles, as demonstrated via a typical CCK-8 assay, and their performance in fluorescence cell imaging and MR imaging shows their potential for applications in biomedical imaging.

Flash nanoprecipitation of ultra-small semiconducting polymer dots with size tunability

Small-sized semiconducting polymer dots (Pdots) provide better tissue and subcellular penetration while minimizing unspecific interactions, and make the fast clearance of Pdots from human bodies possible by urinary excretion. We employ a powerful and scalable technology, flash nanoprecipitation, to prepare Pdots with small sizes (hydrodynamic diameters ∼10 nm).