Fluorescent polyurethane nanofabrics: a source of singlet oxygen and oxygen sensing

Photonic hydrogels combining the slow photon effect and NO gas therapy for synergetic enhanced photodynamic antibacterial therapy

Photodynamic therapy (PDT) offers potential for combating bacterial infections through the generation of reactive oxygen species (ROS). However, the antibacterial efficiency of PDT is largely impeded by the limited photon absorption of photosensitizers and the short diffusion length and lifespan of ROS. Herein, we present a light-harvesting platform based on l-arginine-modified photonic hydrogels loaded with new indocyanine green (PG@Arg/IR820) for synergizing the slow photon effect with NO gas therapy to enhance PDT antibacterial efficiency. Upon near-infrared (NIR) light irradiation, PG@Arg/IR820 can maximize the utilization of photons via the slow photon effect to generate sufficient ROS, which not only acts as the primary bactericidal agent in PDT but also triggers l-arginine to generate NO. NO exhibits a long diffusion distance and lifespan and can freely diffuse to inhibit distant bacterial growth, demonstrating a vital complementary advantage in bacterial inactivation by ROS. The synergistic effect of the slow photon effect combined with NO gas therapy allows PG@Arg/IR820 to intensify bacterial destruction and enhance PDT antibacterial efficiency. This antibacterial system sheds light on an advisable design principle for efficient antibacterial activities in photodynamic inactivation.

Singlet Oxygen Photophysics: From Liquid Solvents to Mammalian Cells

Molecular oxygen, O2, has long provided a cornerstone for studies in chemistry, physics, and biology. Although the triplet ground state, O2(X3Σg-), has garnered much attention, the lowest excited electronic state, O2(a1Δg), commonly called singlet oxygen, has attracted appreciable interest, principally because of its unique chemical reactivity in systems ranging from the Earth's atmosphere to biological cells. Because O2(a1Δg) can be produced and deactivated in processes that involve light, the photophysics of O2(a1Δg) are equally important. Moreover, pathways for O2(a1Δg) deactivation that regenerate O2(X3Σg-), which address fundamental principles unto themselves, kinetically compete with the chemical reactions of O2(a1Δg) and, thus, have practical significance. Due to technological advances (e.g., lasers, optical detectors, microscopes), data acquired in the past ∼20 years have increased our understanding of O2(a1Δg) photophysics appreciably and facilitated both spatial and temporal control over the behavior of O2(a1Δg). One goal of this Review is to summarize recent developments that have broad ramifications, focusing on systems in which oxygen forms a contact complex with an organic molecule M (e.g., a liquid solvent). An important concept is the role played by the M+•O2-• charge-transfer state in both the formation and deactivation of O2(a1Δg).

Thermal-Accelerated Urease-Driven Bowl-Like Polydopamine Nanorobot for Targeted Photothermal/Photodynamic Antibiotic-Free Antibacterial Therapy

The problem of antibiotic resistance seriously affects the treatment of bacterial infections, so there is an urgent need to develop novel antibiotic-independent antimicrobial strategies. Herein, a urease-driven bowl-like mesoporous polydopamine nanorobot (MPDA@ICG@Ur@Man) based on single-wavelength near-infrared (NIR) remote photothermal acceleration to achieve antibiotic-free phototherapy(photothermal therapy, PTT, plus photodynamic therapy, PDT) is first reported. The smart nanorobots can perform active movement by decomposing urea to produce carbon dioxide and ammonia. Particularly, the elevated local temperature during PTT can increase urease activity to enhance the autonomous movement and thus increase the contact between the antimicrobial substance and bacteria. Compared with a nanomotor propelled by urea only, the diffusion coefficient (De) of photothermal-accelerated nanorobots is increased from 1.10 to 1.26 µm2 s-1. More importantly, urease-driven bowl-like nanorobots with photothermal enhancement can specifically identify Escherichia coli (E. coli) and achieve simultaneous PTT/PDT at a single wavelength with 99% antibactericidal activity in vitro. In a word, the urease-driven bowl-like nanorobots guided by photothermal-accelerated strategy could provide a novel perspective for increasing PTT/PDT antibacterial therapeutic efficacy and be promising for various antibiotic-free sterilization applications.

Near-infrared responsive sulfur vacancy-rich CuS nanosheets for efficient antibacterial activity via synergistic photothermal and photodynamic pathways

Defect engineering has been proven to be an effective approach for electronic structure modulation and plays an important role in the photocatalytic performance of nanomaterials. In this study, a series of CuS nanosheet sulfur vacancies (V_S) are constructed by a simple hydrothermal synthesis method. The CuS with the highest V_S concentration exhibits strong antibacterial performance, achieving bactericidal rates of 99.9% against the Gram-positive Bacillus subtilis and Gram-negative Escherichia coli bacteria under 808 nm laser irradiation. Under illumination, the temperature of the catalyst increases from 23.5 °C to 53.3 °C, and with a high photothermal conversion efficiency of 41.8%. For E. coli and B. subtilis, the reactive oxygen species (ROS) production that is induced by the CuS group is 8.6 and 9.6 times greater, respectively, than that of the control group. The presence of V_S facilitates the enhancement of the light absorption capacity and the separation efficiency of electron-hole pairs, thereby resulting in improved photocatalytic performance. The synergistic effect of photothermal therapy (PTT) and photodynamic therapy (PDT) is aimed at causing oxidative damage and leading to bacterial death. Our findings provide an effective antibacterial strategy and offer new horizons for the application of CuS catalysts with V_S in the NIR region.

Exquisite chemistries of meso-pentafluorophenyl and meso-(2,6-dichlorophenyl) dipyrromethanes

meso-Aryl dipyrromethanes are important building blocks to create various practical molecules, and the electron-withdrawing effect of the meso-aryls can play an important role in improving/controlling their reactivities in further reactions: meso-Pentafluorophenyl and meso-(2,6-dichlorophenyl) substituted dipyrromethanes towards the associating dipyrrins and other derivatives have been investigated, in which coordination with different transition metals followed by the dissociation of the metal coordination by interruption of proton and halide ions have been verified. Furthermore, simple DDQ-oxidations of the dipyrromethanes have afforded DDQ-dipyrrin adducts which were delivered to distinctly advanced molecular rearrangements in the presence of acid and base. Vinylene bisdipyrrin compounds, obtained in the reactions of DDQ-dipyrrin adducts with a Lewis base triethylamine, have produced expanded porphyrinoid bis-nickel complexes during the metalation procedure with nickel acetate, while a cobalt metalation of the vinylene bisdipyrrin compounds resulted in an isolation of diamagnetic octahedral cobalt(III) complex. Moreover, meso-pentafluorophenyl and meso-(2,6-dichlorophenyl) dipyrromethanes have been useful platforms to accomplish size-controlled series of meso-aryl-substituted expanded porphyrins and easy separation/purification of selective meso-aryl expanded porphyrins, in which advanced metal complexes and various fascinating properties and reactivities admitting moderate functional molecules have arisen.

Solubilization of Charged Porphyrins in Interpolyelectrolyte Complexes: A Computer Study

Using coarse-grained dissipative particle dynamics (DPD) with explicit electrostatics, we performed (i) an extensive series of simulations of the electrostatic co-assembly of asymmetric oppositely charged copolymers composed of one (either positively or negatively charged) polyelectrolyte (PE) block A and one water-soluble block B and (ii) studied the solubilization of positively charged porphyrin derivatives (P+) in the interpolyelectrolyte complex (IPEC) cores of co-assembled nanoparticles. We studied the stoichiometric mixtures of 137 A10+B25 and 137 A10-B25 chains with moderately hydrophobic A blocks (DPD interaction parameter aAS=35) and hydrophilic B blocks (aBS=25) with 10 to 120 P+ added (aPS=39). The P+ interactions with other components were set to match literature information on their limited solubility and aggregation behavior. The study shows that the moderately soluble P+ molecules easily solubilize in IPEC cores, where they partly replace PE+ and electrostatically crosslink PE- blocks. As the large P+ rings are apt to aggregate, P+ molecules aggregate in IPEC cores. The aggregation, which starts at very low loadings, is promoted by increasing the number of P+ in the mixture. The positively charged copolymers repelled from the central part of IPEC core partially concentrate at the core-shell interface and partially escape into bulk solvent depending on the amount of P+ in the mixture and on their association number, AS. If AS is lower than the ensemble average ⟨AS⟩n, the copolymer chains released from IPEC preferentially concentrate at the core-shell interface, thus increasing AS, which approaches ⟨AS⟩n. If AS>⟨AS⟩n, they escape into the bulk solvent.

Multifunctional Photosensitizing and Biotinylated Polystyrene Nanofiber Membranes/Composites for Binding of Biologically Active Compounds

A three-step postprocessing functionalization of pristine electrospun polystyrene nanofiber membranes was used for the preparation of nanostructured biotinylated materials with an externally bonded porphyrin photosensitizer. Subsequently, the material was able to strongly bind biologically active streptavidin derivatives while keeping its photosensitizing and antibacterial properties due to the generation of singlet oxygen under the exclusive control of visible light. The resulting multifunctional materials functionalized by a streptavidin-horseradish peroxidase conjugate as a model bioactive compound preserved its enzymatic activity even in the presence of a porphyrin photosensitizer with some quenching effect on the activity of the photosensitizer. Prolonged kinetics of both singlet oxygen luminescence and singlet oxygen-sensitized delayed fluorescence (SODF) were found after irradiation by visible light. The above results reflected less effective quenching of the porphyrin photosensitizer triplet state by ground state oxygen and indicated hindered oxygen transport (diffusion) due to surface functionalization. We found that SODF could be used as a valuable tool for optimizing photosensitizing efficiency as well as a tool for confirming surface functionalization. Full photosensitizing and enzyme activity could be achieved by a space separation of photosensitizers and enzyme/biomolecules in the nanofiber composites consisting of two layers. The upper layer contained a photosensitizer that generated antibacterial singlet oxygen upon irradiation by light, and the bottom layer retained enzymatic activity for biochemical reactions.

Multifunctional Gas and pH Fluorescent Sensors Based on Cellulose Acetate Electrospun Fibers Decorated with Rhodamine B-Functionalised Core-Shell Ferrous Nanoparticles

Ferrous core-shell nanoparticles consisting of a magnetic γ-Fe₂O₃ multi-nanoparticle core and an outer silica shell have been synthesized and covalently functionalized with Rhodamine B (RhB) fluorescent molecules (γ-Fe₂O₃/SiO₂/RhB NPs). The resulting γ-Fe₂O₃/SiO₂/RhB NPs were integrated with a renewable and naturally-abundant cellulose derivative (i.e. cellulose acetate, CA) that was processed in the form of electrospun fibers to yield multifunctional fluorescent fibrous nanocomposites. The encapsulation of the nanoparticles within the fibers and the covalent anchoring of the RhB fluorophore onto the nanoparticle surfaces prevented the fluorophore's leakage from the fibrous mat, enabling thus stable fluorescence-based operation of the developed materials. These materials were further evaluated as dual fluorescent sensors (i.e. ammonia gas and pH sensors), demonstrating consistent response for very high ammonia concentrations (up to 12000 ppm) and fast and linear response in both alkaline and acidic environments. The superparamagnetic nature of embedded nanoparticles provides means of electrospun fibers morphology control by magnetic field-assisted processes and additional means of electromagnetic-based manipulation making possible their use in a wide range of sensing applications.

Polystyrene and Poly(ethylene glycol)-b-Poly(ε-caprolactone) Nanoparticles with Porphyrins: Structure, Size, and Photooxidation Properties

The transport of a photosensitizer to target biological structures followed by the release of singlet oxygen is a critical step in photodynamic therapy. We compared the (photo)physical properties of polystyrene nanoparticles (TPP@PS) of different sizes and self-assembled poly(ethylene glycol)-b-poly(ε-caprolactone) core/shell nanoparticles (TPP@PEG-PCL) with different lengths of copolymer blocks, both suitable for the transport of the tetraphenylporphyrin (TPP) photosensitizer. The singlet oxygen was formed inside both nanoparticles after irradiation with visible light. Its kinetics was controlled by the size of TPP@PS; its lifetime (τ_Δ) increased with increasing nanoparticle size (from 6.5 to 16 μs) because of hindered diffusion into the external aqueous environment, where it was quickly deactivated. Accordingly, the prolongation of the singlet oxygen-sensitized delayed fluorescence kinetics was found for TPP@PS of high size. The TPP@PEG-PCL self-assemblies allowed for enhanced oxygen diffusion, and the estimated low values of τ_Δ ≈ 3.7 μs were independent of the size of building blocks. The delayed fluorescence in oxygen-free conditions originating from triplet-triplet annihilation indicated a high mobility of TPP in the PCL core in comparison with fixed molecules in the PS matrix. Photooxidation of uric acid revealed the highest efficacy for TPP@PS of small sizes, whereas the largest TPP@PS exhibited the lowest activity, and the efficacy of TPP@PEG-PCL remained independent of the sizes of the building blocks.

BODIPY-embedded electrospun materials in antimicrobial photodynamic inactivation

Drug-resistant pathogens, particularly those that result in hospital acquired infections (HAIs), have emerged as a critical priority for the World Health Organization. To address the need for self-disinfecting materials to counter the threat posed by the transmission of these pathogens from surfaces to new hosts, here we investigated if a cationic BODIPY photosensitizer, embedded via electrospinning into nylon and polyacrylonitrile (PAN) nanofibers, was capable of inactivating both bacteria and viruses via antimicrobial photodynamic inactivation (aPDI). Materials characterization, including fiber morphology and the degree of photosensitizer loading, was assessed by scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and UV-visible diffuse reflectance spectroscopy (UV-Vis DRS), and demonstrated that the materials were comprised of nanofibers (125-215 nm avg. diameter) that were thermostable to >300 °C. The antimicrobial potencies of the resultant Nylon-BODIPY⁽⁺⁾ and PAN-BODIPY⁽⁺⁾ nanofiber materials were evaluated against four strains of bacteria recognized by the World Health Organization as either critical or high priority pathogens: Gram-positive strains methicillin-resistant S. aureus (MRSA; ATCC BAA-44) and vancomycin-resistant E. faecium (VRE; ATCC BAA-2320), and Gram-negative strains multidrug-resistant A. baumannii (MDRAB; ATCC BAA-1605) and NDM-1 positive K. pneumoniae (KP; ATCC BAA-2146). Our results demonstrated the detection limit (99.9999%; 6 log units reduction in CFU mL^-1) photodynamic inactivation of three strains upon illumination (30-60 min; 40-65 ± 5 mW cm^-2; 400-700 nm): MRSA, VRE, and MDRAB, but only minimal inactivation (47-75%) of KP. Antiviral studies employing PAN-BODIPY⁽⁺⁾ against vesicular stomatitis virus (VSV), a model enveloped virus, revealed complete inactivation. Taken together, the results demonstrate the potential for electrospun BODIPY⁽⁺⁾-embedded nanofiber materials as the basis for pathogen-specific anti-infective materials, even at low photosensitizer loadings.

Fluorescent electrospun PMMA microfiber mats with embedded NaYF4: Yb/Er upconverting nanoparticles

Functional upconverting nanoparticles (UCNPs) can offer new possibilities in fluorescent applications as they exhibit desired characteristic properties like large shift between the fluorescent emission signal and the infrared excitation wavelength, multi- and narrow-band absorption and emission in visible and near infrared - Vis/NIR, together with excellent photostability and low toxicity as opposed to semiconducting quantum dots. The upconversion luminescence emission or quenching characteristics of UCNPs can be altered upon exposure to physical or chemical environmental factors providing thus a functionality that can be utilized for sensing or imaging. Furthermore their functionalization with suitable indicator dyes or recognition elements can extend the range of luminescence response and ratiometric sensing to specific analytes. Synergistically, electrospun nano- and microfibers offering large surface area can enhance the functionality of UCNPs by retaining the fluorescence efficiency and improving the overall responsivity due to dramatically increased surface. For the optimization of this hybrid material system the controllable incorporation of UCNPs is required especially at increased concentration conditions needed for high brightness. Herein, we report the fabrication, morphological and optical characterization of electrospun polymer-based nanocomposite fibers, consisting of poly(methyl methacrylate) (PMMA) and upconverting lanthanide doped nanoparticles of the type NaYF₄ : 20% Yb³⁺/2% Er³⁺ @ NaYF₄. Morphological studies regarding the uniformity and aggregation effects of the UCNP inclusion within the fibers have been implemented followed by upconversion emission characterization by pulsed near-infrared excitation. The study and optimization of such nanocomposite fibrous systems could provide useful insights for the development of efficient upconverting electrospun fiber mats for a number of imaging and sensing applications.

The Photodynamic Properties and the Genotoxicity of Heat-Treated Silicalite-1 Films

We investigated the use of a supported silicalite-1 film (SF) as a promising coating for metallic materials used in the fabrication of prostheses. The role of carbonaceous residua present on high-temperature calcined-SF in generating singlet oxygen for future use as a sterilization method has also been addressed, and the potential genotoxicity of these residua in osteoblast-like cells has been investigated. Calcination of as-synthesized SF induced the appearance of a rather complicated mixture of aliphatic and aromatic species on its outer surface. A series of variously volatile polycyclic aromatic hydrocarbons (PAH), including naphthalene, fluorene, phenanthrene, anthracene, fluoranthene, and pyrene, were identified in micromole concentrations. Irradiation of these PAHs on calcined-SF immersed in air-saturated chloroform led to the formation of very low concentrations of singlet oxygen. However, an increased level of DNA damage was observed on calcined-SF by immunofluorescence staining of phosphorylated histone H2AX analyzed by flow cytometry.

The nanoscaled metal-organic framework ICR-2 as a carrier of porphyrins for photodynamic therapy

Nanosized porphyrin-containing metal-organic frameworks (MOFs) attract considerable attention as solid-state photosensitizers for biological applications. In this study, we have for the first time synthesised and characterised phosphinate-based MOF nanoparticles, nanoICR-2 (Inorganic Chemistry Rez). We demonstrate that nanoICR-2 can be decorated with anionic 5,10,15,20-tetrakis(4-R-phosphinatophenyl)porphyrins (R = methyl, isopropyl, phenyl) by utilizing unsaturated metal sites on the nanoparticle surface. The use of these porphyrins allows for superior loading of the nanoparticles when compared with commonly used 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin. The nanoICR-2/porphyrin composites retain part of the free porphyrins photophysical properties, while the photodynamic efficacy is strongly affected by the R substituent at the porphyrin phosphinate groups. Thus, phosphinatophenylporphyrin with phenyl substituents has the strongest photodynamic efficacy due to the most efficient cellular uptake.

Microscopic time-resolved imaging of singlet oxygen by delayed fluorescence in living cells

Singlet oxygen is a highly reactive species which is involved in a number of processes, including photodynamic therapy of cancer. Its very weak near-infrared emission makes imaging of singlet oxygen in biological systems a long-term challenge. We address this challenge by introducing Singlet Oxygen Feedback Delayed Fluorescence (SOFDF) as a novel modality for semi-direct microscopic time-resolved wide-field imaging of singlet oxygen in biological systems. SOFDF has been investigated in individual fibroblast cells incubated with a well-known photosensitizer aluminium phthalocyanine tetrasulfonate. The SOFDF emission from the cells is several orders of magnitude stronger and much more readily detectable than the very weak near-infrared phosphorescence of singlet oxygen. Moreover, the analysis of SOFDF kinetics enables us to estimate the lifetimes of the involved excited states. Real-time SOFDF images with micrometer spatial resolution and submicrosecond temporal-resolution have been recorded. Interestingly, a steep decrease in the SOFDF intensity after the photodynamically induced release of a photosensitizer from lysosomes has been demonstrated. This effect could be potentially employed as a valuable diagnostic tool for monitoring and dosimetry in photodynamic therapy.

Nanoparticles with Embedded Porphyrin Photosensitizers for Photooxidation Reactions and Continuous Oxygen Sensing

We report the synthesis and characterization of sulfonated polystyrene nanoparticles (average diameter 30 ± 14 nm) with encapsulated 5,10,15,20-tetraphenylporphyrin or ionically entangled tetracationic 5,10,15,20-tetrakis(N-methylpyridinium-4-yl)porphyrin, their photooxidation properties, and the application of singlet oxygen-sensitized delayed fluorescence (SODF) in oxygen sensing. Both types of nanoparticles effectively photogenerated singlet oxygen, O₂(¹Δ_g). The O₂(¹Δ_g) phosphorescence, transient absorption of the porphyrin triplet states, and SODF signals were monitored using time-resolved spectroscopic techniques. The SODF intensity depended on the concentration of the porphyrin photosensitizer and dissolved oxygen and on the temperature. After an initial period (a few microseconds), the kinetics of the SODF process can be approximated as a monoexponential function, and the apparent SODF lifetimes can be correlated with the oxygen concentration. The oxygen sensing based on SODF allowed measurement of the dissolved oxygen in aqueous media in the broad range of oxygen concentrations (0.2-38 mg L^-1). The ability of both types of nanoparticles to photooxidize external substrates was predicted by the SODF measurements and proven by chemical tests. The relative photooxidation efficacy was highest at a low porphyrin concentration, as indicated by the highest fluorescence quantum yield (Φ_F), and it corresponds with negligible inner filter and self-quenching effects. The photooxidation abilities were sensitive to the influence of temperature on the diffusion and solubility of oxygen in both polystyrene and water media and to the rate constant of the O₂(¹Δ_g) reaction with a substrate. Due to their efficient photogeneration of cytotoxic O₂(¹Δ_g) at physiological temperatures and their oxygen sensing via SODF, both types of nanoparticles are promising candidates for biomedical applications.

Poly(carboxylic acid)-Cyclodextrin/Anionic Porphyrin Finished Fabrics as Photosensitizer Releasers for Antimicrobial Photodynamic Therapy

In the development of new antibacterial therapeutic approaches to fight multidrug-resistant bacteria, antimicrobial photodynamic therapy (aPDT) represents a well-known alternative to treat local infections caused by different microorganisms. Here we present a polypropylene (PP) fabric finished with citrate-hydroxypropyl-βCD polymer (PP-CD) entrapping the tetra-anionic 5,10,15,20-tetrakis(4-sulfonatophenyl)-21H,23H-porphine (TPPS) as photosensitizer-eluting scaffold (PP-CD/TPPS) for aPDT. The concept is based on host-guest complexation of porphyrin in the cavities of CDs immobilized on the PP fibers, followed by its sustained and controlled delivery in release medium and simultaneous photoinactivation of microorganisms. Morphology of fabric was characterized by optical (OM) and scanning electron microscopies (SEM). Optical properties were investigated by UV-vis absorption, steady- and time-resolved fluorescence emission spectroscopy. X-ray photoelectron spectroscopy (XPS) and FT-IR revealed the surface chemical composition and the distribution map of the molecular components on the fabric, respectively. Direct ¹O₂ determination allowed to assess the potential photodynamic activity of the fabric. Release kinetics of TPPS in physiological conditions pointed out the role of the CD cavity to control the TPPS elution. Photoantimicrobial activity of the porphyrin-loaded textile was investigated against both Gram-positive Staphylococcus aureus ATCC 29213 (S. aureus) and Gram-negative Pseudomonas aeruginosa ATCC 27853 (P. aeruginosa). Optical microscopy coupled with UV-vis extinction and fluorescence spectra aim to ascertain the uptake of TPPS to S. aureus bacterial cells. Finally, PP-CD/TPPS fabric-treated S. aureus cells were photokilled of 99.98%. Moreover, low adhesion of S. aureus cells on textile was established. Conversely, no photodamage of fabric-treated P. aeruginosa cells was observed, together with their satisfying adhesion.

Singlet oxygen feedback delayed fluorescence of protoporphyrin IX in organic solutions

The PpIX DF show the significant role of SOFDF mechanism at high concentrations and at atmospheric partial pressure of oxygen and should be considered when developing diagnostic tools for clinical applications.

Antibacterial, Antiviral, and Oxygen-Sensing Nanoparticles Prepared from Electrospun Materials

A simple nanoprecipitation method was used for preparation of stable photoactive polystyrene nanoparticles (NPs, diameter 30 ± 10 nm) from sulfonated electrospun polystyrene nanofiber membranes with encapsulated 5,10,15,20-tetraphenylporphyrin (TPP) or platinum octaethylporphyrin (Pt-OEP). The NPs prepared with TPP have strong antibacterial and antiviral properties and can be applied to the photooxidation of external substrates based on photogenerated singlet oxygen. In contrast to nanofiber membranes, which have limited photooxidation ability near the surface, NPs are able to travel toward target species/structures. NPs with Pt-OEP were used for oxygen sensing in aqueous media, and they presented strong linear responses to a broad range of oxygen concentrations. The nanofiber membranes can be applied not only as a source of NPs but also as an effective filter for their removal from solution.

Polystyrene Nanofiber Materials for Visible-Light-Driven Dual Antibacterial Action via Simultaneous Photogeneration of NO and O2((1)Δg)

This contribution reports on the preparation, characterization, and biological evaluation of electrospun polystyrene nanofiber materials engineered with a covalently grafted NO photodonor and ionically entangled tetracationic porphyrin and phthalocyanine photosensitizers. These photofunctional materials exhibit an effective and simultaneous photogeneration of two antibacterial species such as nitric oxide (NO) and singlet oxygen, O2((1)Δg) under illumination with visible light, as demonstrated by their direct detection using amperometric and time-resolved spectroscopic techniques. Dual-mode photoantibacterial action is demonstrated by antibacterial tests carried out on Escherichia coli.

Anion exchange nanofiber materials activated by daylight with a dual antibacterial effect

Anion exchange polystyrene nanofiber materials (AE) were prepared by electrospinning followed by two-step functionalization of the nanofiber surface by chlorosulfonic acid and ethylendiamine. The photoactive character of these materials was introduced through adsorption of the tetra-anionic 5,10,15,20-tetrakis-(4-sulfonatophenyl)porphyrin photosensitizer (TPPS-AE) on the nanofiber surface or by encapsulation of the nonpolar 5,10,15,20-tetraphenylporphyrin photosensitizer (AE(TPP)) into the nanofibers. Anion exchange nanofiber materials with porphyrins are characterized by a high ion-exchange capacity, photogeneration of singlet oxygen O2((1)Δg), and singlet oxygen-sensitized delayed fluorescence. Due to the photogeneration of cytotoxic O2((1)Δg), the nanofibers exhibited oxidation of the external substrates in aqueous solution and an efficient antibacterial effect when activated by simulated daylight. Adsorption of both TPPS and I(-) on the surface of AE led to the formation of more efficient I-TPPS-AE materials. Rapid photooxidation of I(-) by O2((1)Δg), and the formation of another cytotoxic species, I3(-), on the surface of the nanofibers were responsible for the increased antibacterial properties of I-TPPS-AE and the prolonged antibacterial effect in the dark.

The singlet-oxygen-sensitized delayed fluorescence in mammalian cells: a time-resolved microscopy approach

Microsecond kinetics of singlet-oxygen-sensitized delayed fluorescence (SOSDF) have been detected from individual living fibroblast cells as a proof-of-concept. These provide valuable information about excited state lifetimes and their changes during PDT-like treatment.

Spatiotemporal oxygen sensing using dual emissive boron dye-polylactide nanofibers

Oxygenation in tissue scaffolds continues to be a limiting factor in regenerative medicine despite efforts to induce neovascularization or to use oxygen-generating materials. Unfortunately, many established methods to measure oxygen concentration, such as using electrodes, require mechanical disturbance of the tissue structure. To address the need for scaffold-based oxygen concentration monitoring, a single-component, self-referenced oxygen sensor was made into nanofibers. Electrospinning process parameters were tuned to produce a biomaterial scaffold with specific morphological features. The ratio of an oxygen sensitive phosphorescence signal to an oxygen insensitive fluorescence signal was calculated at each image pixel to determine an oxygenation value. A single component boron dye-polymer conjugate was chosen for additional investigation due to improved resistance to degradation in aqueous media compared to a boron dye polymer blend. Standardization curves show that in fully supplemented media, the fibers are responsive to dissolved oxygen concentrations less than 15 ppm. Spatial (millimeters) and temporal (minutes) ratiometric gradients were observed in vitro radiating outward from the center of a dense adherent cell grouping on scaffolds. Sensor activation in ischemia and cell transplant models in vivo show oxygenation decreases on the scale of minutes. The nanofiber construct offers a robust approach to biomaterial scaffold oxygen sensing.

Superhydrophilic polystyrene nanofiber materials generating O2((1)Δ(g)): postprocessing surface modifications toward efficient antibacterial effect

The surfaces of electrospun polystyrene (PS) nanofiber materials with encapsulated 1% w/w 5,10,15,20-tetraphenylporphyrin (TPP) photosensitizer were modified through sulfonation, radio frequency (RF) oxygen plasma treatment, and polydopamine coating. The nanofiber materials exhibited efficient photogeneration of singlet oxygen. The postprocessing modifications strongly increased the wettability of the pristine hydrophobic PS nanofibers without causing damage to the nanofibers, leakage of the photosensitizer, or any substantial change in the oxygen permeability of the inner bulk of the polymer nanofiber. The increase in the surface wettability yielded a significant increase in the photo-oxidation of external polar substrates and in the antibacterial activity of the nanofibers in aqueous surroundings. The results reveal the crucial role played by surface hydrophilicity/wettability in achieving the efficient photo-oxidation of a chemical substrate/biological target at the surface of a material generating O2((1)Δg) with a short diffusion length.

Transparent organosilica photocatalysts activated by visible light: photophysical and oxidative properties at the gas-solid interface

The photophysical properties of several photosensitizers (PSs) included or grafted in silica monoliths were compared to their properties in solution. The effects of the solid support on their steady-state and transient absorption spectra, on their quantum yields of singlet oxygen ((1)O2) production, and on their ability to photoinduce the oxidation of dimethylsulfide (DMS) were investigated. Two cyanoanthracene derivatives (9,14-dicyanobenzo[b]triphenylene, DBTP, and 9,10-dicyanoanthracene, DCA), as well as three phenothiazine dyes (methylene blue, MB(+), new methylene blue, NMB(+), methylene violet, MV), were encapsulated in silica, analyzed and compared to two reference PSs (perinaphthenone, PN and rose bengal, RB). A DBTP derivative (3-[N-(N″-triethoxysilylpropyl-N'-hexylurea)]carboxamido-9,14-dicyanobenzo[b]triphenylene, 3) was also prepared and grafted onto silica. Thanks to the transparency and the free-standing shape of the monoliths, the complete spectroscopic characterization of the supported PSs was carried out directly at the gas-solid interface. The influence of the silica network, the PS, and the adsorption/grafting link between the PS and silica was investigated. The effects of PS concentration, gaseous atmosphere, humidity, and hydrophobicity on the production of (1)O2 were analyzed. With all PSs, (1)O2 production was very efficient (quantum yields of (1)O2 production, relative to PN, between 0.6 and 1), and this species was the only one involved in the pollutant photooxidation. The influence of the matrix on the PSs' photophysics could be considered as negligible. In contrast, the matrix effect on DMS photooxidation was extremely important: the gas diffusion inside the porous structure, and thus, the photoactivity of the materials, strictly depended on silica's surface area and porosity. Our results highlight the suitability of these silica structures as inert supports for the study of the photosensitizing properties at the gas-solid interface. Moreover, thanks to the adsorption properties of the matrix, the synthesized materials can be used as microphotoreactor for the (1)O2-mediated oxidation of volatile pollutants.

Significant sensitivity and stability enhancement of tetraphenylporphyrin-based optical oxygen sensing material in presence of perfluorochemicals

Emission-based oxygen sensing properties of highly luminescent tetraphenylporphyrin molecules were investigated in polystyrene, ethyl cellulose, poly(1-trimethylsilyl-1-propyne) and poly(isobutylmethacrylate) matrices. The effect of perfluorochemicals (PFCs) on oxygen sensitivity and stability of the sensor materials was also examined. Fluorescence intensity and lifetime measurements of meso-tetraphenylporphyrinato Zn ( II ) (ZnTPP) and meso-tetraphenylporphyrin (H2TPP) materials were performed in the concentration range of 0–100% pO 2. The fluorescence intensity variation of H2TPPvs. oxygen was 86%. H2TPP-based composite also yielded higher Stern–Volmer constant, faster response and regeneration time, excellent long term photostability and larger linear response range with respect to ZnTPP. The detection limit of oxygen for H2TPP was less than 0.5%. When stored in sealed bags protected from sunlight, no decrease in oxygen sensitivity was observed during approximately five months. As far as we know, the gathered utilization of PFCs and H2TPP embedded in polymer matrices was not previously described in literature, and has present amelioration compared to materials already existing.

Polystyrene nanofiber materials modified with an externally bound porphyrin photosensitizer

Polystyrene ion-exchange nanofiber materials with large surface areas and adsorption capacities were prepared by electrospinning followed by the sulfonation and adsorption of a cationic 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin (TMPyP) photosensitizer on the nanofiber surfaces. The morphology, structure, and photophysical properties of these nanofiber materials were characterized by microscopic methods and steady-state and time-resolved fluorescence and absorption spectroscopies. The externally bound TMPyP can be excited by visible light to form triplet states and singlet oxygen O2((1)Δg) and singlet oxygen-sensitized delayed fluorescence (SODF). The photophysical properties of the nanofibers were strongly dependent on the amount of bound TMPyP molecules and their organization on the nanofiber surfaces. The nanofibers demonstrated photooxidative activity toward inorganic and organic molecules and antibacterial activity against E. coli due to the sensitized formation of O2((1)Δg) that is an effective oxidation/cytotoxic agent. The nanofiber materials also adsorbed heavy metal cations (Pb(2+)) and removed them from the water environment.

Virucidal nanofiber textiles based on photosensitized production of singlet oxygen

Novel biomaterials based on hydrophilic polycaprolactone and polyurethane (Tecophilic®) nanofibers with an encapsulated 5,10,5,20-tetraphenylporphyrin photosensitizer were prepared by electrospinning. The doped nanofiber textiles efficiently photo-generate O₂(¹Δ_g), which oxidize external chemical and biological substrates/targets. Strong photo-virucidal effects toward non-enveloped polyomaviruses and enveloped baculoviruses were observed on the surface of these textiles. The photo-virucidal effect was confirmed by a decrease in virus infectivity. In contrast, no virucidal effect was detected in the absence of light and/or the encapsulated photosensitizer.

Light-activated nanofibre textiles exert antibacterial effects in the setting of chronic wound healing

The maintenance of an aseptic environment for chronic wounds is one of the most challenging tasks in the wound-healing process. Furthermore, the emergence of antibiotic-resistant bacterial strains is on the rise, rendering conventional treatments less effective. A new antibacterial material consisting of a polyurethane Tecophilic(™) nanofibre textile (NT) that was prepared by electrospinning and doped by a tetraphenylporphyrin (TPP) photosensitizer activated by visible light was tested for use in wound beds and bandages. In vitro experiments were performed to assess the antibacterial activity of the textile against three bacterial strains. Furthermore, the new textile was tested in 162 patients with chronic leg ulcers. A complete inhibition of in vitro growth of the three tested bacterial strains was observed on the surface of NTs that had been illuminated with visible light and was clinically demonstrated in 89 patients with leg ulcers. The application of the textiles resulted in a 35% decrease in wound size, as assessed via computer-aided wound tracing. Wound-related pain, which was estimated using a visual analogue scale, was reduced by 71%. The results of this trial reveal that the photoinactivation of bacteria through the photosensitized generation of short-lived, highly reactive singlet oxygen O(2) ((1) Δ(g) ) results in relatively superficial antibacterial effects in comparison with standard antiseptic treatment options. Thus, such treatment does not interfere with the normal healing process. This method therefore represents a suitable alternative to the use of topical antibiotics and antiseptics and demonstrates potentially broad applications in medicine.

Long-lived emissive intra-ligand triplet excited states (3IL): next generation luminescent oxygen sensing scheme and a case study with red phosphorescent diimine Pt(II) bis(acetylide) complexes containing ethynylated naphthalimide or pyrene subunits

The long-lived room temperature (RT) intra-ligand phosphorescence ((3)IL) of dbbpy Pt(II) bis(acetylide) (dbbpy = 4,4'-di-tert-butyl-2,2'-bipyridine) complexes Pt-1 (λ(em) = 629 nm, τ = 118 μs, quantum yield φ = 17.5%) and Pt-3 (λ(em) = 658 nm, τ = 73.6 μs, φ = 2.1%) (dbbpy = 4,4'-di-tert-butyl-2,2'-bipyridine), containing naphthalimide (NI) and pyrene subunits, respectively, were used for enhanced luminescent oxygen sensing, compared to the model complex dbbpyPt (bisphenylacetylide) (Pt-2, λ(em) = 559 nm, τ = 0.7 μs, φ = 49.6%) with the normal (3)MLCT excited state (metal-to-ligand-charge-transfer). The luminescent lifetimes of Pt-1 and Pt-3 are greatly extended by 168-fold and 105-fold, respectively, when compared to that of Pt-2. The (3)IL features of the photoluminescence of Pt-1 and Pt-3 are supported by DFT/TDDFT calculations, which indicated a NI localized triplet excited state but a normal (3)MLCT/(3)LLCT excited state for Pt-2. The luminescent oxygen sensing properties of the complexes in solution as well as in polymer films were studied. In polymer films, the O(2) sensitivity of Pt-1 (quenching constant K(SV) = 0.085 Torr(-1)) and Pt-3 (K(SV) = 0.062 Torr(-1)) is 70-fold and 50-fold of Pt-2 (K(SV) = 0.0012 Torr(-1)), respectively.