Interfacial assemblies of atypical amphiphilic porphyrins: hydrophobicity/hydrophilicity of substituents, annealing effects, and supramolecular chirality

Counterion-Induced Nanosheet-to-Nanofilament Transition of Lyotropic Bent-Core Liquid Crystals

The smart flexibility of phase transitions in liquid crystals (LCs) makes them suitable for various applications and is an important research field in contemporary science, engineering, and technology. Unlike most reports focused on bent-core LCs in the thermotropic situation, in our present study, we designed and synthesized a fully rigid bent-core molecule with the sulfonic acid group replacing conventional flexible chains. A rich variety of counterion-induced supramolecular LC phase behaviors have been systematically investigated. It was found that the smectic phase with nanosheets tends to transform to the hexagonal phase with nanofilaments when the protons of the sulfonic acid group are partially replaced by alkali metal ions. The experimental results show that the nanoaggregate and phase transition are controlled by the displacing ratio of alkali metal ions rather than the molecular concentration. Another interesting feature is that the achiral bent-core molecules self-assemble into columns by helical stacking and present macroscopic chirality, indicating that spontaneous chiral symmetry breaking occurs in the columnar phase. The fully rigid bent-core molecules reveal surprisingly hierarchical molecular self-assemblies with the smectic-to-hexagonal phase transition, which was not previously observed in supramolecular complexes. The findings will provide new possibilities for applications in LC-based photonic devices, biosystem switches, and supramolecular actuators.

Evolution of Nanoflowers and Nanospheres of Zinc Bisporphyrinate Tweezers at the Air/Water Interface

Although the sophisticated Langmuir and Langmuir-Blodgett (LB) techniques facilitate the fabrication of uniform ultrathin monolayer and films, they are also revealed as powerful tools for the bottom-up construction of the nanostructures through the air/water interface. In this paper, unique nanoflowers or nanospheres were constructed based on the synthesized m-phthalic diamide-linked zinc bisporphyrinate tweezers using the Langmuir and LB techniques. It was found that the two tweezer-type zinc bisporphyrinates could form stable two-dimensional spreading films at the air/water interface, which could be subsequently transferred onto solid substrates using the vertical lifting method. Atomic force microscopy (AFM) revealed that at the initial spreading stage, the compound formed flat disklike domains and then hierarchically evolved into nanoflowers or nanospheres upon compressing the floating film. Such nanostructures have not been reported before and cannot be fabricated using the other self-assembly methods.

Spectroscopic and Structural Studies of a Surface Active Porphyrin in Solution and in Langmuir-Blodgett Films

Controlling aggregation of the dual sensitizer-emitter (S-E) zinc tetraphenylporphyrin (ZnTPP) is an important consideration in solid state noncoherent photon upconversion (NCPU) applications. The Langmuir-Blodgett (LB) technique is a facile means of preparing ordered assemblies in thin films to study distance-dependent energy transfer processes in S-E systems and was used in this report to control the aggregation of a functionalized ZnTPP on solid substrates. This was achieved by synthetic addition of a short polar tail to one of the pendant phenyl rings in ZnTPP in order to make it surface active. The surface active ZnTPP derivative formed rigid films at the air-water interface and exhibited mean molecular areas consistent with approximately vertically oriented molecules under appropriate film compression. A red shift in the UV-vis spectra as well as unquenched fluorescence emission of the LB films indicated formation of well-ordered aggregates. However, NCPU, present in the solution phase, was not observed in the LB films, suggesting that NCPU from ZnTPP as a dual S-E required not just a controlled aggregation but a specific orientation of the molecules with respect to each other.

Pd(II)-mediated triad multilayers with zinc tetrapyridylporphyrin and pyridine-functionalized nano-TiO2 as linkers: assembly, characterization, and photocatalytic properties

Triad hybrid multilayers containing the light sensitizers of zinc tetrapyridylporphyrin (ZnTPyP) and pyridine-functionalized TiO(2) (TiO(2)-Py) nanoparticles were constructed on substrate surfaces with the use of Pd(II) ions as the connectors using the layer-by-layer (LBL) method. The assembly process was monitored using ultraviolet-visible (UV-vis) absorption and X-ray photoelectron spectra as well as scanning electron microscopy and atomic force microscopy. The content of the pyridine substituents in the TiO(2)-Py nanocomposites was about 2% (w/w). The Soret absorption band of ZnTPyP was 24 nm red-shifted in the hybrid multilayers due to a strong intermolecular electronic coupling interaction among porphyrin macrocycles or porphyrin macrocycle/TiO(2)-Py nanoparticles. The average surface density of each ZnTPyP layer was about 1.4 × 10(-10) mol/cm(2). Aggregation of the small TiO(2)-Py nanoparticles to larger domains with sizes up to hundreds of nanometers occurred in the hybrid multilayers; however, such an aggregation behavior was weaker than that in the solutions. The quartz substrate modified with the as-prepared Pd/ZnTPyP/Pd/TiO(2)-Py triad hybrid multilayers was used as a heterogeneous photocatalyst for the degradation of methyl orange (MO) under irradiation (λ > 420 nm) at room temperature with a catalytic efficiency of about 1.3 × 10(-3) MO/ZnTPyP·s. Without the use of the filter, the catalytic efficiency increased because both ZnTPyP and TiO(2)-Py nanocomposites acted as the light sensitizers. It is suggested that the present heterogeneous catalyst has the advantages of facile separation, high stability, structural controllability on the molecular and nanoscale level, and good recyclability.

Porphyrin assemblies through the air/water interface: effect of hydrogen bond, thermal annealing, and amplification of supramolecular chirality

Molecular assemblies of two achiral porphyrins with different substituents, 5-(4-methoxycarbonylphenyl)-10,15,20-triphenyl-21H,23H-porphine (TPPCOOMe) and 5-(4-carboxyphenyl)-10,15,20-triphenyl-21H,23H-porphine (TPPCOOH), have been fabricated by the Langmuir-Blodgett (LB) technique. It is disclosed that although only slight differences exist in the molecular skeleton of these two compounds, their interfacial assemblies display distinct chiroptical properties. It is found that weak circular dichroism (CD) signals are observed from the TPPCOOH assemblies, while in the case of the TPPCOOMe assemblies, only negligible CD signals could be detected. Interestingly, after the assemblies are subjected to a thermal annealing treatment, TPPCOOH assemblies show a distinct amplification of CD signals, while those of TPPCOOMe do not. An explanation in terms of the effect of substituents on the spreading properties of the compounds and the effect of intermolecular hydrogen bonds on the cooperative stacking of the building blocks is proposed to explain these new findings. The investigation suggests that in the present porphyrin systems, besides a nice spreading property, the cooperative interaction of various noncovalent interactions, including hydrogen bonding, π-π stacking, and hydrophobic interactions, is essentially required for the occurrence of symmetry breaking at the air/water interface.

Studies on the interaction of achiral cationic pseudoisocyanine with chiral metal complexes

The effect of chiral metal complexes ([Co(en)(3)]I(3)·H(2)O, cis-[CoBr(NH(3))(en)(2)]Br(2), K[Co(edta)]·2H(2)O and [Ru(phen)(3)](PF(6))(2)) on the polymer-bound J-aggregates in aqueous mixtures of pesudoisocyanine (PIC) iodine and poly(acrylic acid, sodium)(PAAS) have been studied by UV-vis absorption, circular dichroism (CD) and fluorescence spectra. At low concentration, the PIC monomers could self-assemble to form supermolecules by binding to each of the COO(-) groups on the polymer chains through electrostatic interactions. After the addition of chiral metal complexes to the formed PIC-PAAS J-aggregates, we found that only the chiral multiple π-conjugated phenanthroline metal complexes could transfer their metal-centered chiral information to the formed J-aggregates. The chiral J-aggregates showed a characteristic induced circular dichroism (ICD) in the visible region of J-band chromophore, and the ICD signals depend on the absolute configuration, concentration of the chiral multiple π-conjugated metal complexes, as well as temperature. More interestingly, the supramolecular chirality of the polymer supported PIC J-aggregates could be memorized even after the addition of an excess opposite chiral complex enantiomers. This is in sharp contrast to the behavior in the high concentrated NaCl induced PIC-J aggregates, in which the optical rotation of a mixture of two enantiomers varies linearly with their ratio.

Thin-film-based nanoarchitectures for soft matter: controlled assemblies into two-dimensional worlds

Controlling the organization of molecular building blocks at the nanometer level is of utmost importance, not only from the viewpoint of scientific curiosity, but also for the development of next-generation organic devices with electrical, optical, chemical, or biological functions. Self-assembly offers great potential for the manufacture of nanoarchitectures (nanostructures and nanopatterns) over large areas by using low-energy and inexpensive spontaneous processes. However, self-assembled structures in 3D media, such as solutions or solids, are not easily incorporated into current device-oriented nanotechnology. The scope of this review is therefore to introduce the expanding methodology for the construction of thin-film-based nanoarchitectures on solid surfaces and to try to address a general concept with emphasis on the availability of dynamic interfaces for the creation and manipulation of nanoarchitectures. In this review, the strategies for the construction of nanostructures, the control and manipulation of nanopatterns, and the application of nanoarchitectures are described; the construction strategies are categorized into three classes: i) π-conjugated molecular assembly in two dimensions, ii) bio-directed molecular assembly on surfaces, and iii) recent thin-film preparation technologies.