Synthesis, characterization, and in vitro pH-controllable drug release from mesoporous silica spheres with switchable gates

Influence of the Surface Functionalization on the Fate and Performance of Mesoporous Silica Nanoparticles

Mesoporous silica nanoparticles have been broadly applied as drug delivery systems owing to their exquisite features, such as excellent textural properties or biocompatibility. However, there are various biological barriers that prevent their proper translation into the clinic, including: (1) lack of selectivity toward tumor tissues, (2) lack of selectivity for tumoral cells and (3) endosomal sequestration of the particles upon internalization. In addition, their open porous structure may lead to premature drug release, consequently affecting healthy tissues and decreasing the efficacy of the treatment. First, this review will provide a comprehensive and systematic overview of the different approximations that have been implemented into mesoporous silica nanoparticles to overcome each of such biological barriers. Afterward, the potential premature and non-specific drug release from these mesoporous nanocarriers will be addressed by introducing the concept of stimuli-responsive gatekeepers, which endow the particles with on-demand and localized drug delivery.

Functionalized Large-Pore Mesoporous Silica Microparticles for Gefitinib and Doxorubicin Codelivery

Large-pore coralline mesoporous silica microparticles (CMS) were synthesized using the triblock polymer PEG-b-PEO-b-PEG and a hydrothermal method. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the coralline morphology of the fabricated materials. The Brunauer⁻Emmett⁻Teller (BET) method and the Barrett⁻Joyner⁻Halenda (BJH) model confirmed the existence of large pores (20 nm) and of a tremendous specific surface area (663.865 m²·g-1) and pore volume (0.365 cm³·g-1). A novel pH-sensitive multiamine-chain carboxyl-functionalized coralline mesoporous silica material (CMS⁻(NH)₃⁻COOH) was obtained via a facile "grafting-to" approach. X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR) validated the effective interfacial functionalization of CMS with carboxyl and multiamine chains. The encapsulation and release behavior of the dual drug (gefitinib (GB) and doxorubicin (DOX)) was also investigated. It was found that CMS⁻(NH)₃⁻COOH allows rapid encapsulation with a high loading capacity of 47.36% for GB and 26.74% for DOX. Furthermore, the release profiles reveal that CMS⁻(NH)₃⁻COOH can preferably control the release of DOX and GB. The accumulative release rates of DOX and GB were 32.03% and 13.66%, respectively, at a low pH (pH 5.0), while they reduced to 8.45% and 4.83% at pH 7.4. Moreover, all of the modified silica nanoparticles exhibited a high biocompatibility with a low cytotoxicity. In particular, the cytotoxicity of both of these two drugs was remarkably reduced after being encapsulated. CMS⁻(NH)₃⁻COOH@GB@DOX showed tremendously synergistic effects of the dual drug in the antiproliferation and apoptosis of A549 human cancer cells in vitro.

A Temperature-, pH- and Voltage-Responsive Nanogate with a Remarkably High Factor of Change in Ion Currents due to ON/OFF Switching

In biological cells, nuclear pore complexes (NPCs) embedded in cell membranes are capable of controlling the flow of ions, for example, Na⁺ , K⁺ , and Ca²⁺ by responding to stimuli, for example, pH and voltage. Inspired by NPCs, researchers have been endeavoring to develop nanogates to achieve the control of ion transport, but the developed nanogates only have a low factor of change in ion currents due to ON/OFF switching. As such nanopores with high temperature and pH responsivities were developed in this work. According to the experimental results, at a voltage of 3 V, the change in ion currents due to pH change is up to a factor of 170, which is remarkably high compared to other nanogates reported. Quantum chemical (QC) calculation results show that a protonated cytosine molecule (C⁺ ) and an unprotonated cytosine molecule (C) form three pairs of hydrogen bonds and consequently a nucleobase pair, CC⁺ , leading to the binding of various strands, assembly of a strand net, and blockage of ion transport. The nanogate developed is capable of responding to temperature change. At a voltage of 3 V, the factor of change in ion currents in response to temperature variation is as high as 110. Further experiments were performed to investigate the influence of the NaCl concentrations and small opening diameters exerted on nanogate performance.

Stimuli-Responsive Nanomachines and Caps for Drug Delivery

In this review we focus on methods that are used to trap and release on command therapeutic drugs from mesoporous silica nanoparticles (MSNs). The pores in the MSNs are large enough to accommodate a wide range of cargo molecules such as anticancer and antibiotic drugs and yet small enough to be blocked by a variety of bulky molecules that act as caps. The caps are designed to be tightly attached to the pore openings and trap the cargo molecules without leakage, but upon application of a designed stimulus detach from the nanoparticles and release the cargo. Of special emphasis in this review are nanomachines that respond to stimuli administered from external sources such as light or magnetic fields, or from chemical stimuli produced by the biological system such as a general change in pH or redox potential, or a highly specific chemical produced by a cancer cell or infectious bacterium. The goal is to release a high local concentration of the cargo only where and when it is needed, thus minimizing off-target side effects. We discuss sophisticated reversible nanomachines but also discuss some useful caps that simply break off from the nanoparticles in response to the selected stimulus. Many ingenious systems have been and are being designed; we primarily highlight those that have been demonstrated to operate in vitro and/or in vivo. In most cases the closed MSNs are endocytosed by diseased or infected cells and opened inside the cells to release the drugs. We begin with an overview of the nanoparticles and nanomachines and then present examples of drug release triggered by internal chemical stimuli from the organism and finally by external light and magnetic field stimuli.

Triplex DNA Nanostructures: From Basic Properties to Applications

Triplex nucleic acids have recently attracted interest as part of the rich "toolbox" of structures used to develop DNA-based nanostructures and materials. This Review addresses the use of DNA triplexes to assemble sensing platforms and molecular switches. Furthermore, the pH-induced, switchable assembly and dissociation of triplex-DNA-bridged nanostructures are presented. Specifically, the aggregation/deaggregation of nanoparticles, the reversible oligomerization of origami tiles and DNA circles, and the use of triplex DNA structures as functional units for the assembly of pH-responsive systems and materials are described. Examples include semiconductor-loaded DNA-stabilized microcapsules, DNA-functionalized dye-loaded metal-organic frameworks (MOFs), and the pH-induced release of the loads. Furthermore, the design of stimuli-responsive DNA-based hydrogels undergoing reversible pH-induced hydrogel-to-solution transitions using triplex nucleic acids is introduced, and the use of triplex DNA to assemble shape-memory hydrogels is discussed. An outlook for possible future applications of triplex nucleic acids is also provided.

Synthesis of pH-Responsive Inorganic Janus Nanoparticles and Experimental Investigation of the Stability of Their Pickering Emulsions

Pickering emulsions exhibit outstanding stability, especially those prepared with Janus particles, whose desorption energy is expected to be up to 3-fold greater than emulsions of homogeneous particles from theoretical calculations. To the best of our knowledge, however, there remains no experimental proof of this behavior in practice. In this study, inorganic Janus nanoparticles were fabricated by regioselective modification of the separate side of SiO₂ nanoparticles with a judiciously selected mixture of trimethoxysilylpropyldiethylenetriamine and n-octyltrimethoxysilane. Janus nanoparticles demonstrated excellent interfacial activity, forming Pickering emulsions with oil phases at oil-water interfacial tensions ranging from 6.6-52.8 mN m^-1. Furthermore, as the interface of the Janus nanoparticles was regionally functionalized with -NH₂ groups, phase inversion could be realized by tuning pH. This is the first example for the Pickering emulsions stabilized with inorganic Janus particles. Importantly, based on the results of centrifugation experiment, the desorption energy of Janus nanoparticles at the interface was 3.2 times larger than that of homogeneous nanoparticles, which is in accordance with the result from theoretical calculations. These experimental results will substantially enrich our understanding of Janus nanoparticle Pickering emulsions and their interfacial assembly behavior.

Adsorption and release of ampicillin antibiotic from ordered mesoporous silica

In this work the adsorption and the release of ampicillin - a β-lactam penicillin-like antibiotic - from MCM-41, SBA-15, and (amino functionalized) SBA-15-NH₂ ordered mesoporous silica (OMS) materials were investigated. The silica matrices differ for their pore size (SBA-15 vs. MCM-41) mainly, and also for surface charge (SBA-15 and MCM-41, vs. SBA-15-NH₂). OMS samples were characterized through small-angle X-rays scattering (SAXS), transmission electron microscopy (TEM), N₂ adsorption-desorption isotherms, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and potentiometric titrations. The quantification of immobilized and released ampicillin was monitored by mean of UV-Vis spectroscopy. Experimental adsorption isotherms evidenced that ampicillin's loading is not related to the pore size (d_BJH) of the adsorbent. Indeed the maximal loadings were 237mg/g for SBA-15 (d_BJH=6.5nm), 278mg/g for MCM-41 (d_BJH=2.2nm), and 333mg/g for SBA-15-NH₂ (d_BJH=5.6nm). Loading seems, instead, to be related to the surface charge density (σ) of the sorbent surface. Indeed, at pH 7.4 ampicillin drug is negatively charged and likely prefers to interact with SBA-15-NH₂ (σ_SBA-15-NH2=+0.223Cm^-2) rather than the slightly negatively charged silicas (σ_SBA-15=-0.044Cm^-2 and σ_MCM-41=-0.033Cm^-2). Similarly, ampicillin release is affected by interfacial interactions. Indeed, we found a burst release from pure silica samples (SBA-15 and MCM-41), whereas a sustained one from SBA-15-NH₂ sample. We explain this behavior as a result of an attractive interaction between the protonated amino group of SBA-15-NH₂ and the negatively charged carboxylate group of ampicillin. In summary, in order to obtain a sustained drug release, the chemical nature of the matrix's surface plays a role which is more important than its textural features. SBA-15-NH₂ matrix is hence a suitable candidate for local sustained release of antibiotic drugs.

pH-Responsive Mesoporous Silica and Carbon Nanoparticles for Drug Delivery

The application of nanotechnology to medicine constitutes a major field of research nowadays. In particular, the use of mesoporous silica and carbon nanoparticles has attracted the attention of numerous researchers due to their unique properties, especially when applied to cancer treatment. Many strategies based on stimuli-responsive nanocarriers have been developed to control the drug release and avoid premature release. Here, we focus on the use of the subtle changes of pH between healthy and diseased areas along the body to trigger the release of the cargo. In this review, different approximations of pH-responsive systems are considered: those based on the use of the host-guest interactions between the nanocarriers and the drugs, those based on the hydrolysis of acid-labile bonds and those based on supramolecular structures acting as pore capping agents.

Gossypol-Capped Mitoxantrone-Loaded Mesoporous SiO2 NPs for the Cooperative Controlled Release of Two Anti-Cancer Drugs

Mesoporous SiO2 nanoparticles, MP-SiO2 NPs, are functionalized with the boronic acid ligand units. The pores of the MP-SiO2 NPs are loaded with the anticancer drug mitoxantrone, and the pores are capped with the anticancer drug gossypol. The resulting two-drug-functionalized MP-SiO2 NPs provide a potential stimuli-responsive anticancer drug carrier for cooperative chemotherapeutic treatment. In vitro experiments reveal that the MP-SiO2 NPs are unlocked under environmental conditions present in cancer cells, e.g., acidic pH and lactic acid overexpressed in cancer cells. The effective unlocking of the capping units under these conditions is attributed to the acidic hydrolysis of the boronate ester capping units and to the cooperative separation of the boronate ester bridges by the lactate ligand. The gossypol-capped mitoxantrone-loaded MP-SiO2 NPs reveals preferential cytotoxicity toward cancer cells and cooperative chemotherapeutic activities toward the cancer cells. The MCF-10A epithelial breast cells and the malignant MDA-MB-231 breast cancer cells treated with the gossypol-capped mitoxantrone-loaded MP-SiO2 NPs revealed after a time-interval of 5 days a cell death of ca. 8% and 60%, respectively. Also, the gossypol-capped mitoxantrone-loaded MP-SiO2 NPs revealed superior cancer-cell death (ca. 60%) as compared to control carriers consisting of β-cyclodextrin-capped mitoxantrone-loaded (ca. 40%) under similar loading of the mitoxantrone drug. The drugs-loaded MP-SiO2 NPs reveal impressive long-term stabilities.

Chemical sensing with nanoparticles as optical reporters: from noble metal nanoparticles to quantum dots and upconverting nanoparticles

A wide variety of biological and medical analyses are based on the use of optical signals to report specific molecular events. Thanks to advances in nanotechnology, various nanostructures have been extensively used as optical reporters in bio- and chemical assays. This review describes recent progress in chemical sensing using noble metal nanoparticles (gold and silver), quantum dots and upconverting nanoparticles. It provides insights into various nanoparticle-based sensing strategies including fluorescence/luminescence resonance energy transfer nanoprobes as well as activatable probes sensitive to specific changes in the biological environment. Finally we list some research challenges to be overcome in order to accelerate the development of applications of nanoparticle bio- and chemical sensors.

Programmed Synthesis by Stimuli-Responsive DNAzyme-Modified Mesoporous SiO2 Nanoparticles

DNAzyme-capped mesoporous SiO2 nanoparticles (MP SiO2 NPs) are applied as stimuli-responsive containers for programmed synthesis. Three types of MP SiO2 NPs are prepared by loading the NPs with Cy3-DBCO (DBCO=dibenzocyclooctyl), Cy5-N3 , and Cy7-N3 , and capping the NP containers with the Mg(2+) , Zn(2+) , and histidine-dependent DNAzyme sequences, respectively. In the presence of Mg(2+) and Zn(2+) ions as triggers, the respective DNAzyme-capped NPs are unlocked, leading to the "click" reaction product Cy3-Cy5. In turn, in the presence of Mg(2+) ions and histidine as triggers the second set of DNAzyme-capped NPs is unlocked leading to the Cy3-Cy7 conjugated product. The unloading of the respective NPs and the time-dependent formation of the products are followed by fluorescence spectroscopy (FRET). A detailed kinetic model for the formation of the different products is formulated and it correlates nicely with the experimental results.

pH triggered self-assembly structural transition of ionic liquids in aqueous solutions: smart use of pH-responsive additives

The pH responsive fluids consisting of single-chain ionic liquid surfactants [C_nmim]Br (n = 12, 14) and hydrotropes can reversibly transform from spherical micelles to vesicles then to spherical micelles again with the change of the solution pH value.

Molecular and supramolecular switches on mesoporous silica nanoparticles

This review summarizes the recent advances of molecular and supramolecular switches installed on mesoporous silica nanoparticles.

DNA switches: from principles to applications

The base sequence of nucleic acid encodes structural and functional properties into the biopolymer. Structural information includes the formation of duplexes, G-quadruplexes, i-motif, and cooperatively stabilized assemblies. Functional information encoded in the base sequence involves the strand-displacement process, the recognition properties by aptamers, and the catalytic functions of DNAzymes. This Review addresses the implementation of the information encoded in nucleic acids to develop DNA switches. A DNA switch is a supramolecular nucleic acid assembly that undergoes cyclic, switchable, transitions between two distinct states in the presence of appropriate triggers and counter triggers, such as pH value, metal ions/ligands, photonic and electrical stimuli. Applications of switchable DNA systems to tailor switchable DNA hydrogels, for the controlled drug-release and for the activation of switchable enzyme cascades, are described, and future perspectives of the systems are addressed.

DNA-modified polymer pores allow pH- and voltage-gated control of channel flux

Biological channels embedded in cell membranes regulate ionic transport by responding to external stimuli such as pH, voltage, and molecular binding. Mimicking the gating properties of these biological structures would be instrumental in the preparation of smart membranes used in biosensing, drug delivery, and ionic circuit construction. Here we present a new concept for building synthetic nanopores that can simultaneously respond to pH and transmembrane potential changes. DNA oligomers containing protonatable A and C bases are attached at the narrow opening of an asymmetric nanopore. Lowering the pH to 5.5 causes the positively charged DNA molecules to bind to other strands with negative backbones, thereby creating an electrostatic mesh that closes the pore to unprecedentedly high resistances of several tens of gigaohms. At neutral pH values, voltage switching causes the isolated DNA strands to undergo nanomechanical movement, as seen by a reversible current modulation. We provide evidence that the pH-dependent reversible closing mechanism is robust and applicable for nanopores with opening diameters of up to 14 nm. The concept of creating an electrostatic mesh may also be applied to different organic polymers.

Anion-based pH responsive ionic liquids: design, synthesis, and reversible self-assembling structural changes in aqueous solution

The creation of pH responsive materials that undergo morphological transitions between micelle and vesicle induced by solution pH change is of great importance for their potential application in drug delivery and biochemical engineering. Here, we have developed a series of 18 pH responsive ionic liquids composed of 1-alkyl-3-methylimidazolium cation, [C(n)mim](+) (n = 4, 6, 8, 10, 12, 14), and different pH responsive anions such as potassium phthalic acid ([C6H4COOKCOO](-)), sodium sulfosalicylic acid ([C6H3OHCOOSO3Na](-)), and sodium m-carboxylbenzenesulfonate ([C6H4COOSO3Na](-)). The aggregation behavior and self-assembly structures of the ILs in aqueous solution have been investigated by surface tension, dynamic light scattering, transmission electron microscopy, small-angle X-ray scattering, and nuclear magnetic resonance spectroscopy. It was found for the first time that single tail ionic liquids, [C(n)mim]X (n = 12 and 14, X = [C6H4COOKCOO], [C6H3OHCOOSO3Na], and [C6H4COOSO3Na]) could form vesicles without any additives, and reversible transition was observed between spherical micelles and vesicles with the change of solution pH value. The transition in self-assembly structures is suggested to be driven by the variation in molecular structure and hydrophilicity/hydrophobicity of anions of the ILs.

MSN anti-cancer nanomedicines: chemotherapy enhancement, overcoming of drug resistance, and metastasis inhibition

In the anti-cancer war, there are three main obstacles resulting in high mortality and recurrence rate of cancers: the severe toxic side effect of anti-cancer drugs to normal tissues due to the lack of tumor-selectivity, the multi-drug resistance (MDR) to free chemotherapeutic drugs and the deadly metastases of cancer cells. The development of state-of-art nanomedicines based on mesoporous silica nanoparticles (MSNs) is expected to overcome the above three main obstacles. In the view of the fast development of anti-cancer strategy, this review highlights the most recent advances of MSN anti-cancer nanomedicines in enhancing chemotherapeutic efficacy, overcoming the MDR and inhibiting metastasis. Furthermore, we give an outlook of the future development of MSNs-based anti-cancer nanomedicines, and propose several innovative and forward-looking anti-cancer strategies, including tumor tissue-cell-nuclear successionally targeted drug delivery strategy, tumor cell-selective nuclear-targeted drug delivery strategy, multi-targeting and multi-drug strategy, chemo-/radio-/photodynamic-/ultrasound-/thermo-combined multi-modal therapy by virtue of functionalized hollow/rattle-structured MSNs.

Constructing tunable nanopores and their application in drug delivery

Inspired by biological cell membranes, various "smart" and efficient gating nanoporous devices have been proposed to imitate and to understand life processes. Nanodevices under development with enhanced gating efficiency could play pivotal roles in biosensing and drug delivery. In this Perspective, we highlight an important development by Willner and colleagues that is detailed in this issue of ACS Nano. They designed a new "smart" nanodevice with both "sense" and "release" functionalities for drug delivery based on a nanoporous material, mesoporous silica nanoparticles. We outline recent progress in designing intelligently gated nanoporous devices in material science and nanotechnology. We also summarize new strategies designed for drug delivery based on mesoporous materials. With continuing efforts, we expect more powerful nanodevices to be developed and used in clinical and other real-word applications.

Biocatalytic release of an anticancer drug from nucleic-acids-capped mesoporous SiO2 Using DNA or molecular biomarkers as triggering stimuli

DNA-gated mesoporous SiO2 nanoparticles, MP-SiO2 NPs, loaded with rhodamine B, RhB, act as "smart" materials that reveal complementary "sense" and "release" functionalities. The unlocking of the DNA pore-capping units is achieved by the biocatalytic cleavage of the DNA, and the unlocking process is amplified by the regeneration of the analyte-trigger. The RhB-loaded MP-SiO2 NPs are capped with nucleic acid hairpin structures that lock the RhB in the pores. Opening of the hairpin structures by a nucleic acid analyte trigger or by the formation of an aptamer-substrate (ATP) complex leads to the formation of duplex structures being cleaved by exonuclease III, Exo III, or the nicking enzyme, Nb. BbvCI. This results in the regeneration of the target analytes, the autonomous unlocking of the pores, and the release of RhB. The systems reveal selectivity, and one-, two-, three-base mutations in the target DNA, or substitution of ATP with other triphosphate nucleotides, prohibit the unlocking of the pores. In analogy to the biocatalytic release of the model fluorophore substrates, the anticancer drug camptothecin, CPT, was entrapped in the pores and locked by the 1 or 11 hairpin structures. The drug was released from the pores in the presence of the nucleic acid 2 or ATP and the Exo III, as biocatalyst. Similarly, CPT locked in the pores by the 6 or 12 hairpins were released from the pores in the presence of ATP and Nb. BbvCI, as nicking enzyme, respectively. The effects of the CPT-loaded MP-SiO2 NPs, capped with the ATP-dependent lock 6, on the viability of MDA-231 breast cancer cells and MCF-10a normal breast cells were examined. We find that after 48 h, 65% cell death was observed for the MDA-231 cancer cells, where only 25% cell death was observed for the normal cells. The higher cell death of the cancer cells correlates well with the enhanced metabolic synthesis of ATP in the cancerous cells.

Synthesis, characterization and pH-controllable methotrexate release from biocompatible polymer/silica nanocomposite for anticancer drug delivery

The objective of this study was to develop pH-responsive silica nanoparticles by imidazole-based ionic liquid for controlled release of methotrexate. In this article, we synthesized pH-responsive cationic silica nanoparticles by graft copolymerization of vinyl functionalized silica nanoparticles and methacrylic acid (MAA) monomer. Imidazole-based ionic liquid (Im-IL) was verified by (1)HNMR and Fourier-transform infrared (FTIR) spectroscopy. The synthesized functionalized silica particles were characterized and confirmed by various technologies including the scanning electron microscopy (SEM), the infrared spectroscopy (IR) and the thermogravimetric analysis (TGA). SEM results reveal the uniformity in size/shape of silica particles. This nanosystem is modified for targeted delivery of an anticancer agent methotrexate. The nanocomposite-MTX complex was formed at physiological pH (7.4) due to the electrostatic interactions between anionic carboxylic group of MTX molecules and cationic rings in carrier, while, the release of which can be achieved through the cleavage of the nanocomposite-MTX complex by protonation of carboxyl groups in the MTX segment that are sensitive to variations in external pH at weak acidic conditions. FT-IR spectroscopy showed the presence of light interactions between the silicate silanols and the drug. MCF7 cells were incubated with the MTX-free nanocomposite and MTX-loaded nanocomposite at various concentrations for 24, 48 and 72 h, and the data showed that the nanocomposites themselves did not affect the growth of MCF7 cells. Antitumor activity of the MTX-loaded nanocomposites against the cells was kept over the whole experiment process. The results showed that the MTX could be released from the fibers without losing cytotoxicity.

A mesoporous silica nanocomposite shuttle: pH-triggered phase transfer between oil and water

With a simple protocol, we synthesize a novel mesoporous silica nanocomposite shuttle that can reversibly transfer between an organic phase and water in response to the pH, due to the switchable surface hydrophobicity/hydrophilicity. Our synthesis protocol allows the phase transfer ability to be tuned in a controllable fashion. This nanocomposite shuttle exhibits a good ability to load various cargoes such as Pd(OAc)2, Pd nanoparticles, and organic molecules. The built-in properties of the nanocomposite shuttle lay the foundations for many innovative applications. As a proof of concept, we successfully demonstrate its application in separating and recycling Pd nanoparticle catalysts. The composite shuttle can take Pd nanoparticles to an organic phase for catalyzing hydrogenation of olefins and come back to an aqueous phase at the end of reaction, making in situ separation and recycling of nanocatalysts possible. This pH-driven round trip for catalysis can be repeated several times. Our investigations not only supply a novel nanocomposite shuttle with controllable properties but also open an innovative avenue to in situ separation and recycling of nanocatalysts, which can address the obstacles of the conventional methods such as centrifugation and filtration.

Hydrophobic core/hydrophilic shell structured mesoporous silica nanospheres: enhanced adsorption of organic compounds from water

Inspired by the structure features of micelle, we attempt to synthesize a novel functionalized mesoporous silica nanosphere consisting of a hydrophobic core and a hydrophilic shell. The obtained solid materials were structurally confirmed by N(2) sorption, X-ray diffraction (XRD), and transmission electron microscopy (TEM). Their compositions were characterized by Fourier transfer infrared spectroscopy (FT-IR), solid state NMR, X-ray photoelectron spectroscopy (XPS), and elemental analysis. Its fundamental properties such as dispersibility in water or organic phase, wettability, and adsorption ability toward hydrophobic organics in water were investigated. It was revealed that these important properties could be facilely adjusted through varying structure and composition. In particular, these materials showed much better adsorption ability toward hydrophobic organic molecules in water than conventional monofunctionalized mesoporous materials, owing to possessing the hydrophobic/hydrophilic domain-segregated and hierarchically functionalized mesoporous structures. The intriguing properties would make mesoporous materials more accessible to many important applications, especially in aqueous systems.

Smart mesoporous SiO2 nanoparticles for the DNAzyme-induced multiplexed release of substrates

The fluorescent dyes methylene blue, MB(+), and thionine, Th(+), can be trapped in the pores of mesoporous silica, MP-SiO(2), by means of functional nanostructures consisting of the Mg(2+)- or Zn(2+)-dependent DNAzyme sequences. In the presence of Mg(2+) or Zn(2+) ions the respective DNAzymes are activated, leading to the specific cleavage of the respective caps, and the selective release of MB(+) or Th(+). The enlargement of the conserved loop domains of the Mg(2+)- or Zn(2+)-dependent DNAzyme sequences with foreign nucleotides prohibits the formation of active DNAzymes and eliminates the release of the respective dyes. This is due to the flexibility of the loops that lacks affinity for the association of the ions. The insertion of aptamer sequences (e.g., the adenosine-5'-triphosphate (ATP) aptamer) or ion-binding sequences (e.g., T-rich Hg(2+) ion-binding domains) as foreign components to the loop regions allows the formation of active Mg(2+)- or Zn(2+)-dependent DNAzyme structures through the cooperative formation of aptamer-ATP complexes or T-Hg(2+)-T bridges. These aptamer-substrate complexes or T-Hg(2+)-T bridges allosterically stabilize and activate the DNAzymes, thus allowing the selective release of the fluorescent substrates MB(+) or Th(+). The metal ion-driven DNAzyme release of substrates from the pores of MP-SiO(2), and particularly the allosteric activation of the DNAzymes through cooperative aptamer-substrate complexes or metal-ion bridges, has important future nanomedical implications for targeted release of drugs. This is demonstrated with the triggered release of the anticancer drug, doxorubicin, by the Mg(2+)-DNAzyme-locked pores or by the aptamer-ATP complex-triggered activation of the Mg(2+)-dependent DNAzyme.

Combination of iCVD and porous silicon for the development of a controlled drug delivery system

We describe a pH responsive drug delivery system which was fabricated using a novel approach to functionalize biodegradeable porous silicon (pSi) by initiated chemical vapor deposition (iCVD). The assembly involved first loading a model drug (camptothecin, CPT) into the pores of the pSi matrix followed by capping the pores with a thin pH responsive copolymer film of poly(methacrylic acid-co-ethylene dimethacrylate) (p(MAA-co-EDMA)) via iCVD. Release of CPT from uncoated pSi was identical in two buffers at pH 1.8 and pH 7.4. In contrast, the linear release rate of CPT from the pSi matrix with the p(MAA-co-EDMA) coating was dependent on the pH; release of CPT was more than four times faster at pH 7.4 (13.1 nmol/(cm(2) h)) than at pH 1.8 (3.0 nmol/(cm(2) h)). The key advantage of this drug delivery approach over existing ones based on pSi is that the iCVD coating can be applied to the pSi matrix after drug loading without degradation of the drug because the process does not expose the drug to harmful solvents or high temperatures and is independent of the surface chemistry and pore size of the nanoporous matrix.

Mesoporous silica nanoparticles capped with disulfide-linked PEG gatekeepers for glutathione-mediated controlled release

Hybrid mesoporous silica nanoparticles (MSNs), which were synthesized using the co-condensation method and engineered with unique redox-responsive gatekeepers, were developed for studying the glutathione-mediated controlled release. These hybrid nanoparticles constitute a mesoporous silica core that can accommodate the guests (i.e., drug, dye) and the PEG shell that can be connected with the core via disulfide-linker. Interestingly, the PEG shell can be selectively detached from the inner core at tumor-relevant glutathione (GSH) levels and facilitate the release of the encapsulated guests at a controlled manner. The structure of the resulting hybrid nanoparticles (MSNs-SS-mPEG) was comprehensively characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), and nitrogen adsorption/desorption isotherms analysis. The disulfide-linked PEG chains anchored on MSNs could serve as efficient gatekeepers to control the on-off of the pores. Compared with no GSH, fluorescein dye as the model drug loaded into MSNs showed rapid release in 10 mM GSH, indicating the accelerated release after the opening of the pores regulated by GSH. Confocal microscopy images showed a clear evidence of the dye-loaded MSNs-SS-mPEG nanoparticles endocytosis into MCF-7 cells and releasing guest molecules from the pore inside cells. Moreover, in vitro cell viability test using MTT assay indicated that MSNs-SS-mPEG nanoparticles had no obvious cytotoxicity. These results indicate that MSNs-SS-mPEG nanoparticles can be used in the biomedical field.