The structure and dynamics of hydrated and hydroxylated magnesium oxide nanoparticles

Mechanism of Autocatalytic Reduction of CO2 over MgCO3 to High Value-Added Chemicals: A DFT & AIMD Study

Calcination of MgCO3 is an important industrial reaction, but it causes significant and unfavorable CO2 production. Calcination in a reducing green hydrogen atmosphere can substantially reduce CO2 release and produce high value-added products such as CO or hydrocarbons, but the mechanism is still unclear. Here, the in situ transformation process of MgCO3 interacting with hydrogen and the specific formation mechanism of the high value-added products are thoroughly investigated based on reaction thermodynamic, ab initio molecular dynamics (AIMD) simulations, and density functional theory (DFT) calculations. The reaction thermodynamic parameters of MgCO3 coupled with hydrogen to produce CO or methane are calculated, revealing that increasing and decreasing the thermal reductive decomposition temperature favors the production of CO and methane, respectively. Kinetically, the energy barriers of each possible production pathway for the dominant products CO and methane are further calculated in conjunction with the AIMD simulation results of the transformation process. The results suggest that CO is produced via the MgO catalytic-carboxyl pathway (CO2*→ COOH*trans→ COOH*cis→ CO*→ CO), which is autocatalyzed by MgO derived from the thermal reductive decomposition of MgCO3. For the mechanism of methane formation, it prefers to be produced by the stepwise interaction of carbonates in the MgCO3 laminates with hydrogen adsorbed on their surfaces (direct conversion pathway: sur-O-CO → sur-O-HCO → sur-O-HCOH → sur-O-HC → sur-O-CH2 → sur-O-CH3 → sur-O + CH4*).

Particle size effect on surface/interfacial tension and Tolman length of nanomaterials: A simple experimental method combining with theoretical

Surface tension and interfacial tension are crucial to the study of nanomaterials. Herein, we report a solubility method using magnesium oxide nanoparticles of different radii (1.8-105.0 nm, MgO NPs) dissolved in pure water as a targeted model; the surface tension and interfacial tension (and their temperature coefficients) were determined by measuring electrical conductivity and combined with the principle of the electrochemical equilibrium method, and the problem of particle size dependence is discussed. Encouragingly, this method can also be used to determine the ionic (atomic or molecular) radius and Tolman length of nanomaterials. This research results disclose that surface/interfacial tension and their temperature coefficients have a significant relationship with particle size. Surface/interfacial tension decreases rapidly with a radius <10 nm (while the temperature coefficients are opposite), while for a radius >10 nm, the effect is minimal. Especially, it is proven that the value of Tolman length is positive, the effect of particle size on Tolman length is consistent with the surface/interfacial tension, and the Tolman length of the bulk does not change much in the temperature range. This work initiates a new era for reliable determination of surface/interfacial tension, their temperature coefficients, ionic radius, and Tolman length of nanomaterials and provides an important theoretical basis for the development and application of various nanomaterials.

Activation of CO2 and CH4 on MgO surfaces: mechanistic insights from first-principles theory

One of the most challenging topics in heterogeneous catalysis is conversion of CH₄ to higher hydrocarbons. Direct conversion of CH₄ to ethylene can be achieved via the oxidative coupling of methane (OCM) reaction. Despite studies which have shown MgO to activate CH₄ and initiate the OCM reaction, its large-scale applications face a significant impediment due to formation of a byproduct, CO₂, and poisoning of the catalyst due to carbonate formation. In the present work, we address two aspects of the OCM reaction on MgO surfaces: carbonate formation on the surface of the catalyst, and (dissociative) adsorption of CH₄. We use first-principles density functional theoretical calculations to determine the energetics and underlying mechanisms of interaction of CO₂ and CH₄ with various surfaces of MgO: (100), (110), and (111) (both Mg- and O-terminations), and the seldom studied, hydroxylated (111) MgO surface with O-termination. We find that the strength of the interaction of CO₂ with MgO surfaces depends on several factors: their surface energies, coordination number of surface O atoms, and ability to donate electrons. However, the O-terminated (111) surface of MgO bucks all aforementioned factors, with only oxygen richness affecting its reactivity towards CO₂. The interaction of CH₄ with MgO surfaces depends primarily on the coordination number of the surface O atoms and the orientation of the CH₄ molecule with respect to the surface. Finally, we provide insights into (a) formation of surface carbonates, which is relevant to CO₂ capture and conversion, and (b) C-H bond activation on MgO surfaces, which is crucial for direct conversion of CH₄ to value-added chemicals.

Fourier-transform infrared and X-ray diffraction analyses of the hydration reaction of pure magnesium oxide and chemically modified magnesium oxide

The magnesium hydroxide/magnesium oxide (Mg(OH)2/MgO) system is a promising chemical heat storage system that utilizes unused heat at the temperature range of 200-500 °C. We have previously reported that the addition of lithium chloride (LiCl) and/or lithium hydroxide (LiOH) promotes the dehydration of Mg(OH)2. The results revealed that LiOH primarily catalyzed the dehydration of the surface of Mg(OH)2, while LiCl promoted the dehydration of bulk Mg(OH)2. However, the roles of Li compounds in the hydration of MgO have not been discussed in detail. X-ray diffraction (XRD) and Fourier-transform infrared (FT-IR) techniques were used to analyze the effects of adding the Li compounds. The results revealed that the addition of LiOH promoted the diffusion of water into the MgO bulk phase and the addition of LiCl promoted the hydration of the MgO bulk phase. It was also observed that the concentration (number) of OH- affected hydration. The mechanism of hydration of pure and LiCl- (or LiOH)-added MgO has also been discussed.

Interface between Water-Solvent Mixtures and a Hydrophobic Surface

The mechanism behind the stability of organic nanoparticles prepared by liquid antisolvent (LAS) precipitation without a specific stabilizing agent is poorly understood. In this work, we propose that the organic solvent used in the LAS process rapidly forms a molecular stabilizing layer at the interface of the nanoparticles with the aqueous dispersion medium. To confirm this hypothesis, n-octadecyltrichlorosilane (OTS)-functionalized silicon wafers in contact with water-solvent mixtures were used as a flat model system mimicking the solid-liquid interface of the organic nanoparticles. We studied the equilibrium structure of the interface by X-ray reflectometry (XRR) for water-solvent mixtures (methanol, ethanol, 1-propanol, 2-propanol, acetone, and tetrahydrofuran). The formation of an organic solvent-rich layer at the solid-liquid interface was observed. The layer thickness increases with the organic solvent concentration and correlates with the polar and hydrogen bond fraction of Hansen solubility parameters. We developed a self-consistent adsorption model via complementing adsorption isotherms obtained from XRR data with molecular dynamics simulations.

Observing structural reorientations at solvent–nanoparticle interfaces by X-ray diffraction – putting water in the spotlight

Nanoparticles are attractive in a wide range of research genres due to their size-dependent properties, which can be in contrast to those of micrometre-sized colloids or bulk materials. This may be attributed, in part, to their large surface-to-volume ratio and quantum confinement effects. There is a growing awareness that stress and strain at the particle surface contribute to their behaviour and this has been included in the structural models of nanoparticles for some time. One significant oversight in this field, however, has been the fact that the particle surface affects its surroundings in an equally important manner. It should be emphasized here that the surface areas involved are huge and, therefore, a significant proportion of solvent molecules are affected. Experimental evidence of this is emerging, where suitable techniques to probe the structural correlations of liquids at nanoparticle surfaces have only recently been developed. The recent validation of solvation shells around nanoparticles has been a significant milestone in advancing this concept. Restructured ordering of solvent molecules at the surfaces of nanoparticles has an influence on the entire panoply of solvent–particle interactions during, for example, particle formation and growth, adhesion forces in industrial filtration, and activities of nanoparticle–enzyme complexes. This article gives an overview of the advances made in solvent–nanoparticle interface research in recent years: from description of the structure of bulk solids and liquidsviamacroscopic planar surfaces, to the detection of nanoscopic restructuring effects. Water–nanoparticle interfaces are given specific attention to illustrate and highlight their similarity to biological systems.

Investigation of the in situ generation of oxide-free copper nanoparticles using pulsed-laser ablation of bulk copper in aqueous solutions of DNA bases

The pulsed-laser ablation method was used as a facile and green approach to prepare oxide-free copper nanoparticles, and was performed by laser ablation of a copper target in aqueous solutions of the DNA bases.

Probing Interfacial Water on Nanodiamonds in Colloidal Dispersion

The structure of interfacial water layers around nanoparticles dispersed in an aqueous environment may have a significant impact on their reactivity and on their interaction with biological species. Using transmission soft X-ray absorption spectroscopy in liquid, we demonstrate that the unoccupied electronic states of oxygen atoms from water molecules in aqueous colloidal dispersions of nanodiamonds have a different signature than bulk water. X-ray absorption spectroscopy can thus probe interfacial water molecules in colloidal dispersions. The impacts of nanodiamond surface chemistry and concentration on interfacial water electronic signature are discussed.

On the relationship between the basicity of a surface and its ability to catalyze transesterification in liquid and gas phases: the case of MgO

The influence of the basic properties of MgO is not the same for liquid and for gas phase transesterification.

Strong electric fields at a prototypical oxide/water interface probed by ab initio molecular dynamics: MgO(001)

We report a density-functional theory (DFT)-based study of the interface of bulk water with a prototypical oxide surface, MgO(001), and focus our study on the often-overlooked surface electric field.

Atomic-scale models of early-stage alkali depletion and SiO2-rich gel formation in bioactive glasses

Molecular dynamics simulations of Na⁺/H⁺-exchanged 45S5 Bioglass® reveal the co-existence of bonded and non-bonded hydroxyls, suggesting a direct mechanism for forming a silica-rich gel structure upon the initial ion exchange.

Current challenges in atomistic simulations of glasses for biomedical applications

Atomic-scale simulations of bioglasses are being used to tackle several challenging aspects, such as new structural markers of bioactivity, ion migration and nanosized samples.

Atomistic theory and simulation of the morphology and structure of ionic nanoparticles

Computational techniques are widely used to explore the structure and properties of nanomaterials. This review surveys the application of both quantum mechanical and force field based atomistic simulation methods to nanoparticles, with a particular focus on the methodologies available and the ways in which they can be utilised to study structure, phase stability and morphology. The main focus of this article is on partially ionic materials, from binary semiconductors through to mineral nanoparticles, with more detailed considered of three examples, namely titania, zinc sulphide and calcium carbonate.