Interfacial pH: a critical factor for osteoporotic bone regeneration

Breaking Osteoclast-Acid Vicious Cycle to Rescue Osteoporosis via an Acid Responsive Organic Framework-Based Neutralizing and Gene Editing Platform

In the osteoporotic microenvironment, the acidic microenvironment generated by excessive osteoclasts not only causes irreversible bone mineral dissolution, but also promotes reactive oxygen species (ROS) production to induce osteoblast senescence and excessive receptor activator of nuclear factor kappa-B ligand (RANKL) production, which help to generate more osteoclasts. Hence, targeting the acidic microenvironment and RANKL production may break this vicious cycle to rescue osteoporosis. To achieve this, an acid-responsive and neutralizing system with high in vivo gene editing capacity is developed by loading sodium bicarbonate (NaHCO3) and RANKL-CRISPR/Cas9 (RC) plasmid in a metal-organic framework. This results showed ZIF8-NaHCO3@Cas9 (ZNC) effective neutralized acidic microenvironment and inhibited ROS production . Surprisingly, nanoparticles loaded with NaHCO3 and plasmids show higher transfection efficiency in the acidic environments as compared to the ones loaded with plasmid only. Finally, micro-CT proves complete reversal of bone volume in ovariectomized mice after ZNC injection into the bone remodeling site. Overall, the newly developed nanoparticles show strong effect in neutralizing the acidic microenvironment to achieve bone protection through promoting osteogenesis and inhibiting osteolysis in a bidirectional manner. This study provides new insights into the treatment of osteoporosis for biomedical and clinical therapies.

Effect of the Sr-Fe layered double hydroxide coating based on the microenvironment response on implant osseointegration in osteoporotic rats

Osteoporosis is a disease that manifests itself as an abnormality of bone metabolism and is characterized by low bone mass and destruction of the bone microstructure. Since bone resorption occurs more rapidly than new bone formation, osteoporosis leads to reduced orthopedic implant stability. From a microenvironmental point of view, the rationale for this outcome is that osteoclasts are overactive in the bone tissue of patients with osteoporosis, and the large amount of H+ they produce leads to local chronic acidosis, which promotes bone mineral loss. Therefore, we designed a weakly alkaline layered double hydroxide (LDH) coating to modulate the pathologically acidic microenvironment and the osteogenic-osteoclastic coupling by releasing Sr2+. We prepared Sr-Fe LDH coatings on pure titanium implants using a hydrothermal method in this study and characterized the material using SEM, AFM, XRD, XPS, EDS, ICP, pH acidimeter, etc. We found that the coatings had good nanomorphology and were able to efficiently neutralize H+ as well as steadily release Sr2+ for up to 21 days. In vitro, the coating not only significantly promoted the adhesion, proliferation, and differentiation of osteoblasts, but also inhibited the differentiation of osteoclasts at the same time. In addition, in animal experiments, the coating significantly improved the mechanical stability of the implant in osteoporotic rats, increasing Sr-Fe LDH@Ti maximal push-out force by 72.2% compared to Ti. At the same time, the coating was effective in reversing the osteoporotic state, resulting in a 58.5% increase in BV/TV (%), and a 12.4% increase in Tb. N (1 mm-1), a 31.6% increase in Tb. Th (μm), and a 30.9% increase in BA (%). Our results suggest that this Sr-Fe LDH nanocoating material with acid-neutralizing, as well as long-term Sr2+-releasing capabilities, is a novel and effective orthopedic implant coating material under osteoporotic conditions.

Dual Mg-Reinforced PCL Membrane with a Janus Structure for Vascularized Bone Regeneration and Bacterial Elimination

Commercially available guided bone regeneration (GBR) membranes often exhibit limited mechanical properties or bioactivity, leading to poor performance in repairing bone defects. To surmount this limitation, we developed a Janus structural composite membrane (Mg-MgO/PCL) reinforced by dual Mg (Mg sheets and MgO NPs) by using a combined processing technique involving casting and electrospinning. Results showed that the addition of Mg sheets and MgO NPs enhanced the mechanical properties of the composite membrane for osteogenic space maintenance, specifically tensile strength (from 10.2 ± 1.2 to 50.3 ± 4.5 MPa) and compression force (from 0 to 0.94 ± 0.09 N mm-1), through Mg sheet reinforcement and improved crystallization. The dense cast side of the Janus structure membrane displayed better fibroblast barrier capacity than a single fiber structure; meanwhile, the PCL matrix protected the Mg sheet from severe corrosion due to predeformation. The porous microfibers side supported preosteoblast cell adhesion, enhanced osteogenesis, and angiogenesis in vitro, through the biomimetic extracellular matrix and sustainable Mg2+ release. Furthermore, the Mg-MgO/PCL membrane incorporating 2 wt % MgO NPs exhibited remarkable antimicrobial properties, inducing over 88.75% apoptosis in Staphylococcus aureus. An in vivo experiment using the rat skull defect model (Φ = 5 mm) confirmed that the Mg-MgO/PCL membrane significantly improved new bone formation postsurgery. Collectively, our investigation provides valuable insights into the design of multifunctional membranes for clinical oral GBR application.

An assessment of physical properties and the viability of osteoblast-like cells of cefazolin-impregnated calcium sulfate bone-void filler

Calcium sulfate, an injectable and biodegradable bone-void filler, is widely used in orthopedic surgery. Based on clinical experience, bone-defect substitutes can also serve as vehicles for the delivery of drugs, for example, antibiotics, to prevent or to treat infections such as osteomyelitis. However, antibiotic additions change the characteristics of calcium sulfate cement. Moreover, high-dose antibiotics may also be toxic to bony tissues. Accordingly, cefazolin at varying weight ratios was added to calcium sulfate samples and characterized in vitro. The results revealed that cefazolin changed the hydration reaction and prolonged the initial setting times of calcium sulfate bone cement. For the crystalline structure identification, X-ray diffractometer revealed that cefazolin additive resulted in the decrease of peak intensity corresponding to calcium sulfate dihydrate which implying incomplete phase conversion of calcium sulfate hemihydrate. In addition, scanning electron microscope inspection exhibited cefazolin changed the morphology and size of the crystals greatly. A relatively higher amount of cefazolin additive caused a faster degradation and a lower compressive strength of calcium sulfate compared with those of uploaded samples. Furthermore, the extract of cefazolin-impregnated calcium sulfate impaired cell viability, and caused the death of osteoblast-like cells. The results of this study revealed that the cefazolin additives prolonged setting time, impaired mechanical strength, accelerated degradation, and caused cytotoxicity of the calcium sulfate bone-void filler. The aforementioned concerns should be considered during intra-operative applications.

Collaborative Design of MgO/FeOx Nanosheets on Titanium: Combining Therapy with Regeneration

The repair of bone defects caused by osteosarcoma resection remains a clinical challenge because of the tumor recurrence and bacterial infection. Combining tumor and bacterial therapy with bone regeneration properties in bone implants is a promising strategy for the treatment of osteosarcoma. Here, a layer of MgO/FeO_x nanosheet is constructed on the Ti implant to prevent tumor recurrence and bacterial infection, while simultaneously accelerating bone formation. This MgO/FeO_x double metal oxide demonstrates good peroxidase activity to catalyze H₂ O₂ , which is rich in tumor microenvironment, to form reactive oxygen species (ROS), and shows good photothermal conversion capacity to produce photothermal effect, thus synergistically killing tumor cells and eliminating tumor tissue. In addition, it generates a local alkaline surface microenvironment to inhibit the energy metabolism of bacteria to enhance the photothermal antibacterial effect. Furthermore, benefiting from the generation of a Mg ion-containing alkaline microenvironment, this MgO/FeO_x film can promote the osteogenic differentiation of osteoblast and angiogenesis of vascular endothelial cells in vitro as well as accelerated bone formation in vivo. This study proposes a multifunctional platform for integrating tumor and bacterial therapy and bone regeneration, which has good application prospects for the treatment of osteosarcoma.

Nano-Hydroxyapatite/PLGA Mixed Scaffolds as a Tool for Drug Development and to Study Metastatic Prostate Cancer in the Bone

(1) Background: Three-dimensional (3D) in vitro, biorelevant culture models that recapitulate cancer progression can help elucidate physio-pathological disease cues and enhance the screening of more effective therapies. Insufficient research has been conducted to generate in vitro 3D models to replicate the spread of prostate cancer to the bone, a key metastatic site of the disease, and to understand the interplay between the key cell players. In this study, we aim to investigate PLGA and nano-hydroxyapatite (nHA)/PLGA mixed scaffolds as a predictive preclinical tool to study metastatic prostate cancer (mPC) in the bone and reduce the gap that exists with traditional 2D cultures. (2) Methods: nHA/PLGA mixed scaffolds were produced by electrospraying, compacting, and foaming PLGA polymer microparticles, +/- nano-hydroxyapatite (nHA), and a salt porogen to produce 3D, porous scaffolds. Physicochemical scaffold characterisation together with an evaluation of osteoblastic (hFOB 1.19) and mPC (PC-3) cell behaviour (RT-qPCR, viability, and differentiation) in mono- and co-culture, was undertaken. (3) Results: The results show that the addition of nHA, particularly at the higher-level impacted scaffolds in terms of mechanical and degradation behaviour. The nHA 4 mg resulted in weaker scaffolds, but cell viability increased. Qualitatively, fluorescent imaging of cultures showed an increase in PC-3 cells compared to osteoblasts despite lower initial PC-3 seeding densities. Osteoblast monocultures, in general, caused an upregulation (or at least equivalent to controls) in gene production, which was highest in plain scaffolds and decreased with increases in nHA. Additionally, the genes were downregulated in PC3 and co-cultures. Further, drug toxicity tests demonstrated a significant effect in 2D and 3D co-cultures. (4) Conclusions: The results demonstrate that culture conditions and environment (2D versus 3D, monoculture versus co-culture) and scaffold composition all impact cell behaviour and model development.

Biological Fixation of Bioactive Bone Cement in Vertebroplasty: The First Clinical Investigation of Borosilicate Glass (BSG) Reinforced PMMA Bone Cement

PMMA bone cement has been clinically used for decades in vertebroplasty due to its high mechanical strength and satisfactory injectability. However, the interface between bone and PMMA is fragile and more prone to refracture in situ because PMMA lacks a proper biological response from the host bone with minimal bone integration and dense fibrous tissue formation. Here, we modified PMMA by incoporating borosilicate glass (BSG) with a dual glass network of [BO₃] and [SiO₄], which spontaneously modulates immunity and osteogenesis. In particular, the BSG modified PMMA bone cement (abbreviated as BSG/PMMA cement) provided an alkaline microenvironment that spontaneously balanced the activities between osteoclasts and osteoblasts. Furthermore, the trace elements released from the BSGs enhanced the osteogenesis to strengthen the interface between the host bone and the implant. This study shows the first clinical case after implantation of BSG/PMMA for three months using the dual-energy CT, which found apatite nucleation around PMMA instead of fibrous tissues, indicating the biological interface was formed. Therefore, BSG/PMMA is promising as a biomaterial in vertebroplasty, overcoming the drawback of PMMA by improving the biological response from the host bone.

Fabrication of strontium carbonate-based composite bioceramics as potential bone regenerative biomaterials

Strontium carbonate (SrC) bioceramics are proposed as potential biomaterials to efficaciously repair the bone defects. However, the development of SrC bioceramics is restricted by their intrinsic low mechanical strength. In this study, SrC-based composite bioceramics (SrC-SrP) were fabricated by incorporating strontium-containing phosphate glass (SrP). The results indicated that aside from the main crystalline phase SrC, new compounds were generated in the SrC-SrP bioceramics. Incorporating 10 wt% SrP promoted densification, thus dramatically improving compressive strength of SrC-SrP bioceramics. The SrC-SrP bioceramics facilitated apatite precipitation on their surface, and sustainedly released strontium, phosphorus and sodium ions. Compared with the well-known β-tricalcium phosphate bioceramics, the SrC-SrP bioceramics with certain amounts of SrP enhanced proliferation, alkaline phosphatase activity and osteogenesis-related gene expressions of mouse bone mesenchymal stem cells. The SrC-SrP bioceramics with appropriate constituent can serve as novel bone regenerative biomaterials.

Development of a borosilicate bioactive glass scaffold incorporating calcitonin gene-related peptide for tissue engineering

Protein delivery and release from synthetic scaffold materials are major challenges within the field of bone tissue engineering. In this study, 13-93B1.5 borosilicate bioactive glass (BSG) base paste was 3D printed to produce BSG-based scaffolds with high porosity (59.85 ± 6.04%) and large pore sizes (350-400 μm) for functionalization with a sodium alginate (SA)/calcitonin gene-related peptide (CGRP) hydrogel mixture. SA/CGRP hydrogel was uniformly filled into the interconnected pores of 3D printed BSG constructs to produce BSG-SA/CGRP scaffolds which were subject to bioactivity and biocompatibility analysis. BSG scaffolds filled with SA hydrogel underwent dissolution in simulated body fluid (SBF), resulting in the precipitation of hydroxyapatite (HA) on the borosilicate glass evidenced by scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Around 90% of CGRP was released from scaffolds after 7 days of immersion in SBF, reaching a final released concentration of 893.00 ± 63.30 ng/mL. Cellular adhesion, proliferation, and differentiation of human bone marrow mesenchymal stem cells (HBMSCs) cultured with BSG-SA/CGRP scaffolds revealed improved biocompatibility and osteogenic capabilities compared with BSG-SA scaffolds in the absence of CGRP. When subcutaneously implanted in rat models, BSG-SA/CGRP scaffolds induced low localized inflammation without causing bodily harm in vivo. Findings revealed that bioactive glass scaffolds incorporating CGRP met the scaffold requirements for bone regeneration and that the addition of CGRP promoted osteogenic differentiation where it may potentially be utilized for future regenerative applications.

Construction of a drug-containing microenvironment for in situ bone regeneration

Bioactive glass-coated hierarchical porous tricalcium phosphate ceramics were constructed as both bone scaffolds and drug delivery devices to treat S. aureus-infected bone defects.

Magnesium cationic cue enriched interfacial tissue microenvironment nurtures the osseointegration of gamma-irradiated allograft bone

Regardless of the advancement of synthetic bone substitutes, allograft-derived bone substitutes still dominate in the orthopaedic circle in the treatments of bone diseases. Nevertheless, the stringent devitalization process jeopardizes their osseointegration with host bone and therefore prone to long-term failure. Hence, improving osseointegration and transplantation efficiency remains important. The alteration of bone tissue microenvironment (TME) to facilitate osseointegration has been generally recognized. However, the concept of exerting metal ionic cue in bone TME without compromising the mechanical properties of bone allograft is challenging. To address this concern, an interfacial tissue microenvironment with magnesium cationc cue was tailored onto the gamma-irradiated allograft bone using a customized magnesium-plasma surface treatment. The formation of the Mg cationic cue enriched interfacial tissue microenvironment on allograft bone was verified by the scanning ion-selective electrode technique. The cellular activities of human TERT-immortalized mesenchymal stem cells on the Mg-enriched grafts were notably upregulated. In the animal test, superior osseointegration between Mg-enriched graft and host bone was found, whereas poor integration was observed in the gamma-irradiated controls at 28 days post-operation. Furthermore, the bony in-growth appeared on magnesium-enriched allograft bone was significant higher. The mechanism possibly correlates to the up-regulation of integrin receptors in mesenchymal stem cells under modified bone TME that directly orchestrate the initial cell attachment and osteogenic differentiation of mesenchymal stem cells. Lastly, our findings demonstrate the significance of magnesium cation modified bone allograft that can potentially translate to various orthopaedic procedures requiring bone augmentation.

•

A modified interfacial Mg TME was tailored onto the GI allograft bone matrix without compromising the mechanical properties.

•

The SIET were applied to recognize the Mg²⁺-cue enriched interfacial TME on the surface of the Mg-treated bone allograft.

•

The rodent model that is analogous to the clinical use of allograft bone were applied to charaterize the osseointegration.

•

The boundary of the Mg-enriched allograft bone was already unable to be identified and become homogeneous at D28 post-op.

•

The Mg²⁺-cue enriched interfacial TME is able to convince the upregulation of several integrin receptors of MSCs.

Amine modification of calcium phosphate by low-pressure plasma for bone regeneration

Regeneration of large bone defects caused by trauma or tumor resection remains one of the biggest challenges in orthopedic surgery. Because of the limited availability of autograft material, the use of artificial bone is prevalent; however, the primary role of currently available artificial bone is restricted to acting as a bone graft extender owing to the lack of osteogenic ability. To explore whether surface modification might enhance artificial bone functionality, in this study we applied low-pressure plasma technology as next-generation surface treatment and processing strategy to chemically (amine) modify the surface of beta-tricalcium phosphate (β-TCP) artificial bone using a CH₄/N₂/He gas mixture. Plasma-treated β-TCP exhibited significantly enhanced hydrophilicity, facilitating the deep infiltration of cells into interconnected porous β-TCP. Additionally, cell adhesion and osteogenic differentiation on the plasma-treated artificial bone surfaces were also enhanced. Furthermore, in a rat calvarial defect model, the plasma treatment afforded high bone regeneration capacity. Together, these results suggest that amine modification of artificial bone by plasma technology can provide a high osteogenic ability and represents a promising strategy for resolving current clinical limitations regarding the use of artificial bone.

Gallium (Ga)-strontium (Sr) layered double hydroxide composite coating on titanium substrates for enhanced osteogenic and antibacterial abilities

Bacterial infection and poor osteogenic capacity can result in the loosing or failure of titanium (Ti)-based implants in the clinic. Therefore, it is urgent to design an effective approach to enhance the osteogenic property and restrict bacterial activity. In this study, a layered double hydroxide (LDH) composed of Ga and Sr ions on Ti substrates by a hydrothermal method, then calcined in 250°C and denoted as LDH250. The scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were confirmed that the LDH films were successfully formed on the Ti substrates. Importantly, the obtained LDH films can induce an alkaline microenvironment around the Ti surface and regulate the behaviors of osteogenic cells and bacteria. In vitro cellular experiments, the LDH250 can enhance the differentiation of both MC3T3-E1 cells and osteoblasts, stimulate alkaline phosphatase activity (ALP), collagen secretion, and mineralization levels. Meanwhile, antimicrobial assay against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) demonstrated that the LDH250 samples had strong antibacterial abilities, which attributed to the release profile of Ga³⁺ could act as a "Trojan horse" to destroy the bacterial iron metabolism, inducing of local alkaline environment, and producing reactive oxygen species. Hence, this study provides an effective method for reducing antibacterial infection and enhancing the bone integrative capacity of Ti-based implants for orthopedic applications.

An overview of assessment tools for determination of biological Magnesium implant degradation

Medical implants made of biodegradable materials are advantageous for short-term applications as fracture fixation and mechanical support during bone healing. After completing the healing process, the implant biodegrades without any long-term side effects nor any need for surgical removal. In particular, Magnesium (Mg) implants, while degrading, can cause physiological changes in the tissues surrounding the implant. The evaluation of structural remodeling is relevant, however, the functional assessment is crucial to provide information about physiological changes in tissues, which can be applied as an early marker during the healing process. Hence, non-invasive monitoring of structural and functional changes in the surrounding tissue during the healing process is essential, and the need for new assessing methods is emerging. This paper provides an assessment of Mg based implants, and an extensive review of the literature is presented with the focus on the imaging techniques for investigation of the Mg implants' biodegradation. The potential of a hybrid analysis, including Near-Infrared Spectroscopy (NIRS) and photoacoustic imaging (PAI) technology, is further discussed. A hybrid solution may play a significant role in monitoring implants and have several advantages for monitoring tissue oxygenation in addition to tissue's acidity, which is directly connected to the Mg implants degradation process. Such a hybrid assessment system can be a simple, ambulant, and less costly technology with the potential for clinically monitoring of Mg implants at site.

Mg(OH)2 nanoparticles enhance the antibacterial activities of macrophages by activating the reactive oxygen species

Infection often causes disastrous consequences in all fields of clinical medicine, especially orthopedics. Hence, critical efforts are being made to engineer novel nanomaterials for the treatment of orthopedic infections due to the high biocompatibility and antibacterial properties they possess. The purpose of this study was to investigate the antibacterial effects of magnesium hydroxide (Mg(OH)₂ ) nanoparticles (NPs) in vitro and determine their possible mechanisms of action. In this study, Escherichia coli was selected as the pathogenic bacteria and it was found that Mg(OH)₂ NPs significantly inhibited the growth of E. coli by promoting nucleic acid leakage, inhibiting protein synthesis, and suppressing the metabolic activity. The minimum inhibitory concentration for these bacteria was determined to be 4.4 μg/ml. In vitro flow cytometry and immunofluorescence tests indicated that Mg(OH)₂ NPs induced the macrophages to generate reactive oxygen species to kill the bacteria. To understand the mechanisms involved in this process, western blotting was performed and it was found that Mg(OH)₂ NPs activated the phosphatidylinositol-3-kinase/serine-threonine kinase (PI3K/Akt) signaling pathway of macrophages to enhance their phagocytosis with no obvious cytotoxicity. Thus, Mg(OH)₂ NPs are a suitable choice to develop promising agents or coating materials for the treatment of clinically widespread infections in view of their safety, biocompatibility, and powerful antibacterial properties.

Tailoring Materials for Modulation of Macrophage Fate

Human immune system acts as a pivotal role in the tissue homeostasis and disease progression. Immunomodulatory biomaterials that can manipulate innate immunity and adaptive immunity hold great promise for a broad range of prophylactic and therapeutic purposes. This review is focused on the design strategies and principles of immunomodulatory biomaterials from the standpoint of materials science to regulate macrophage fate, such as activation, polarization, adhesion, migration, proliferation, and secretion. It offers a comprehensive survey and discussion on the tunability of material designs regarding physical, chemical, biological, and dynamic cues for modulating macrophage immune response. The range of such tailorable cues encompasses surface properties, surface topography, materials mechanics, materials composition, and materials dynamics. The representative immunoengineering applications selected herein demonstrate how macrophage-immunomodulating biomaterials are being exploited for cancer immunotherapy, infection immunotherapy, tissue regeneration, inflammation resolution, and vaccination. A perspective on the future research directions of immunoregulatory biomaterials is also provided.

Biological analysis of an innovative biodegradable antibiotic eluting bioactive glass/gypsum composite bone cement for treating experimental chronic MRSA osteomyelitis

A multi-barrier antibiotics loaded biodegradable composite bone cement for resolving chronic osteomyelitis has been studied to understand the physico-mechanical properties, drug loading/eluting efficiency, and different merits and demerits prior to clinical application. After successful induction of bone infection in 28 rabbits using methicillin-resistant Staphylococcus aureus (MRSA) strains, calcium sulfate/bioactive glass based composite cement was implanted in 12 defects to assess its performance over parenteral therapy with microscopic and radiological examination for 90 days. The composite cement revealed acceptable physico-mechanical properties and controlled drug elution kinetics. Furthermore, the antibiotics concentrations in bone up to 42 days were sufficient to kill MRSA without eliciting adverse drug reactions. The striking feature of platelets aggregation by composite cement could assist bone healing. The controlled degradation with simultaneous entrapment of composite cement within the osteoid tissues and complete repair of infected cortical defects (holes) in rabbit tibia at 6 weeks indicated the excellent anti-infective and osteoconductive properties of composite cement. Thus, the animal study demonstrated the superiority of composite over injectable antibiotic therapy based on infection resolution and bone regeneration. We thereby conclude that the composite cement can be effectively applied in the treatment of resistant cases of chronic osteomyelitis.

•

Described the preparation method of multi-barrier CS/BG composite bone cement.

•

Made by coating the antibiotics loaded porous BG granules with PLGA and α-CSH.

•

Introduced antibiotics elution study in ideal immersion medium.

•

Beneficial role of PLGA on drug release and activation of platelets by cement was explored.

•

New cement showed great potential to repair bone infection and to hasten osteosynthesis.

In vivo degradation and bone formation behaviors of hydroxyapatite-coated Mg alloys in rat femur

Various coatings have been developed for biodegradable Mg alloys to control the degradation speed and to improve the bone conductivity. In this study, hydroxyapatite (HAp) coatings were formed on pure Mg, Mg-0.8mass% Ca (MgCa), Mg-4mass% Y-3mass% rare earth (RE) (WE43), Mg-3mass% RE-1mass% Y (EW31) and Mg-4mass% RE (RE4) alloy rods with a chemical solution deposition method. The HAp-coated and uncoated Mg/Mg alloy rods were implanted in the femurs of rats for 3-6 months, and the corrosion suppression and bone formation abilities of the HAp coating were examined using a scanning electron microscope. The corrosion rate of WE43 was suppressed by 1/3 with the HAp coating for 6 months, and the corrosion product showed very slow dissolution. The effect of the HAp coating for pure Mg and MgCa disappeared in 1-2 months with the thinning of the rods accompanying with the obvious dissolution of the corrosion products. The effect of the HAp coating for EW31 and RE4 was not stable due to the expansion and collapse of the corrosion products. The bone formation was enhanced on the HAp layers. Eventually, the HAp coating basically suppressed the corrosion initiation and corrosion progress of Mg substrates. The magnitude of the suppression effect depended mainly on the chemical and physical stability of the corrosion products.

Secreted Protein Acidic and Rich in Cysteine as A Regeneration Factor: Beyond the Tissue Repair

Diverse pathologies (inflammation, tissues injuries, cancer, etc.) and physiological conditions (obesity, physical activity, etc.) induce the expression/secretion of the matricellular protein, secrete protein acidic and rich in cysteine (SPARC). SPARC contributes to the creation of an environment that is suitable for tissue regeneration through a variety of roles, including metabolic homeostasis, inflammation reduction, extracellular matrix remodeling and collagen maturation. Such a homeostatic environment optimizes tissue regeneration and improves tissues’ repair ability. These properties that SPARC has within the regeneration contexts could have a variety of applications, such as in obesity, cancer, sarcopenia, diabetes and bioengineering.

Biomimetic and osteogenic 3D silk fibroin composite scaffolds with nano MgO and mineralized hydroxyapatite for bone regeneration

Artificial bioactive materials have received increasing attention worldwide in clinical orthopedics to repair bone defects that are caused by trauma, infections or tumors, especially dedicated to the multifunctional composite effect of materials. In this study, a weakly alkaline, biomimetic and osteogenic, three-dimensional composite scaffold (3DS) with hydroxyapatite (HAp) and nano magnesium oxide (MgO) embedded in fiber (F) of silkworm cocoon and silk fibroin (SF) is evaluated comprehensively for its bone repair potential in vivo and in vitro experiments, particularly focusing on the combined effect between HAp and MgO. Magnesium ions (Mg²⁺) has long been proven to promote bone tissue regeneration, and HAp is provided with osteoconductive properties. Interestingly, the weak alkaline microenvironment from MgO may also be crucial to promote Sprague-Dawley (SD) rat bone mesenchymal stem cells (BMSCs) proliferation, osteogenic differentiation and alkaline phosphatase (ALP) activities. This SF/F/HAp/nano MgO (SFFHM) 3DS with superior biocompatibility and biodegradability has better mechanical properties, BMSCs proliferation ability, osteogenic activity and differentiation potential compared with the scaffolds adding HAp or MgO alone or neither. Similarly, corresponding meaningful results are also demonstrated in a model of distal lateral femoral defect in SD rat. Therefore, we provide a promising 3D composite scaffold for promoting bone regeneration applications in bone tissue engineering.

Covalent grafting of hyperbranched poly-L-lysine on Ti-based implants achieves dual functions of antibacteria and promoted osteointegration in vivo

The dual functional implants of antibacteria and osteointegration are highly demanded in orthopedic and dentistry, especially for patients who suffer from diabetes or osteoporosis simultaneously. However, there is lack of the facile and robust method to produce clinically applicable implants with this dual function although coatings possessing single function have been extensively developed. Herein, hyperbranched poly-L-lysine (HBPL) polymers were covalently immobilized onto the alkali-heat treated titanium (Ti) substrates and implants by using 3-glycidyloxypropyltrimethoxysilane (GPTMS) as the coupling agent, which displayed excellent antibacterial activity against S. aureus and E. coli with an efficiency as high as 89.4% and 92.2% in vitro, respectively. The HBPL coating also significantly promoted the adhesion, spreading, proliferation and osteogenic differentiation of MC3T3-E1 cells in vitro. Furthermore, the results of a S. aureus infection rat model in vivo ulteriorly verified that the HBPL-modified screws had good antibacterial and anti-inflammatory abilities at an early stage of implantation and better osteointegration compared with the control Ti screws.

Calcium silicate bioactive ceramics induce osteogenesis through oncostatin M

Immune reactions are a key factor in determining the destiny of bone substitute materials after implantation. Macrophages, the most vital factor in the immune response affecting implants, are critical in bone formation, as well as bone biomaterial-mediated bone repair. Therefore, it is critical to design materials with osteoimmunomodulatory properties to reduce host-to-material inflammatory responses by inducing macrophage polarization. Our previous study showed that calcium silicate (CS) bioceramics could significantly promote osteogenesis. Herein, we further investigated the effects of CS on the behavior of macrophages and how macrophages regulated osteogenesis. Under CS extract stimulation, the macrophage phenotype was converted to the M2 extreme. Stimulation by a macrophage-conditioned medium that was pretreated by CS extracts resulted in a significant enhancement of osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs), indicating the important role of macrophage polarization in biomaterial-induced osteogenesis. Mechanistically, oncostatin M (OSM) in the macrophage-conditioned medium promoted osteogenic differentiation of BMSCs through the ERK1/2 and JAK3 pathways. This in vivo study further demonstrated that CS bioceramics could stimulate osteogenesis better than β-TCP implants by accelerating new bone formation at defective sites in the femur. These findings improve our understanding of immune modulation of CS bioactive ceramics and facilitate strategies to improve the in vitro osteogenesis capability of bone substitute materials.

•

Calcium silicate (CS) bioceramics significantly promoted osteogenesis by the regulating of macrophage polarization.

•

ERK1/2 and JAK3 pathways mediated the osteogenic differentiation stimulated by CS.

•

CS played a promising osteoimmunomodulatory agent for bone induction.

Three dimensional printed bioglass/gelatin/alginate composite scaffolds with promoted mechanical strength, biomineralization, cell responses and osteogenesis

In this study, porous bioglass/gelatin/alginate bone tissue engineering scaffolds were fabricated by three-dimensional printing. The compressive strength and in vitro biomineralization properties of the bioglass-gelatin-alginate scaffolds (BG/Gel/SA scaffolds) were significantly improved with the increase of bioglass content until 30% weight percentage followed by a rapid decline in strength. In addition, the cells attach and spread on the BG/Gel/SA scaffolds surfaces represents good adhesion and biocompatibility. Furthermore, the cells (rat bone marrow mesenchymal stem cells, mBMSCs) proliferation and osteogenic differentiation on the BG/Gel/SA scaffolds were also promoted with the increase of bioglass content. Overall, the adding of bioglass in Gel/SA scaffolds promotes mechanical strength and in vitro osteogenic properties and the 30 BG scaffold (30%wt BG) has potential applications in bone tissue engineering and bone regenerative repair because of good compressive strength, biocompatibility, and in vitro osteogenesis.

Nanoscaled Bionic Periosteum Orchestrating the Osteogenic Microenvironment for Sequential Bone Regeneration

Periosteum orchestrates bone repair. Previously developed artificial periosteum was mainly focusing on materials modification to simply enhance bone formation, but few were attempting to make the artificial periosteum fit different bone repair stages. Here, we constructed a functionalized periosteum, which was composed of an electrospun scaffold grafted with leptin receptor antibody (LepR-a) and BMP2-loaded hollow MnO₂ (h-MnO₂) nanoparticles through a polydopamine (PDA)-assisted technique. The bionic periosteum showed suitable mechanical properties and favorable biocompatibility. It effectively recruited skeletal stem cells (SSCs) through antigen-antibody interactions, as in in vitro cell adhesion tests, we observed that more SSCs attached to the LepR-a-grafted periosteum compared to the control group. In vivo, the LepR-a-grafted periosteum covered on the cranial defect in Prx1-Cre/ERT2, -EGFP mice recruited more Prx1-EGFP cells to the fracture site compared to control groups at post-surgery day 3, 7, and 14. Co-staining with Sp7 indicated that most of the recruited Prx1-EGFP cells underwent osteogenic lineage commitment. Sustained BMP2 release from h-MnO₂ promoted osteogenesis by accelerating the osteogenic differentiation of recruited SSCs, as demonstrated by alkaline phosphatase (ALP) and alizarin red staining (ARS) in vitro and microcomputed tomography (micro-CT) in vivo. Interestingly, we also observed the growth of osteogenic coupled capillaries (CD31^hiEmcn^hi) in the bone repair site, which might be induced by increased platelet-derived growth factor-BB (PDGF-BB) in the regenerative microenvironment subsequent to SSCs' differentiation. Taken together, the findings from this study indicate that the multifunctionalized periosteum efficiently recruited and motivated the SSCs in vivo and orchestrated the osteogenic microenvironment for bone repair in a sequence manner. Thus, the construction of the bionic periosteum to couple with natural bone regeneration stages has been demonstrated to be effective in facilitating bone healing.

Ratiometric Fluorescent Microgels for Sensing Extracellular Microenvironment pH during Biomaterial Degradation

Bone regeneration has attracted extensive attention in the field of regenerative medicine. The influence of biomaterial on the extracellular environment is important for regulating the biological functions of cells for tissue regeneration. Among the various influencing factors, we had previously demonstrated that the extracellular pH value in the local microenvironment during biomaterial degradation affected the balance of bone formation and resorption. However, there is a lack of techniques for conveniently detecting the pH of the extracellular environment. In light of the development of fluorescent pH-sensing probes, herein, we fabricated a novel ratiometric fluorescent microgel (F-MG) for real-time and spatiotemporal monitoring of microenvironment pH. F-MGs were prepared from polyurethane with a size of around 75 μm by loading with pH-sensitive bovine serum albumin nanoparticles (BNPs) and pH-insensitive Nile red as a reference. The pH probes exhibited reversible fluorescence response to pH change and worked in a linear range of 6-10. F-MGs were biocompatible and could be used for long-term pH detection. It could be used to map interfacial pH on biomaterials during their degradation through pseudocolored images formed by the fluorescence intensity ratio between the green fluorescence of BNPs and the red fluorescence of Nile red. This study provided a useful tool for studying the influence of biomaterial microenvironment on biological functions of surrounding cells.

Physical/Chemical Properties and Resorption Behavior of a Newly Developed Ca/P/S-Based Bone Substitute Material

Properly regulating the resorption rate of a resorbable bone implant has long been a great challenge. This study investigates a series of physical/chemical properties, biocompatibility and the behavior of implant resorption and new bone formation of a newly developed Ca/P/S-based bone substitute material (Ezechbone^® Granule CBS-400). Experimental results show that CBS-400 is comprised majorly of HA and CSD, with a Ca/P/S atomic ratio of 54.6/39.2/6.2. After immersion in Hank’s solution for 7 days, the overall morphology, shape and integrity of CBS-400 granules remain similar to that of non-immersed samples without showing apparent collapse or disintegration. With immersion time, the pH value continues to increase to 6.55 after 7 days, and 7.08 after 14 days. Cytotoxicity, intracutaneous reactivity and skin sensitization tests demonstrate the good biocompatibility features of CBS-400. Rabbit implantation/histological observations indicate that the implanted granules are intimately bonded to the surrounding new bone at all times. The implant is not merely a degradable bone substitute, but its resorption and the formation of new cancellous bone proceed at the substantially same pace. After implantation for 12 weeks, about 85% of the implant has been resorbed. The newly-formed cancellous bone ratio quickly increases to >40% at 4 weeks, followed by a bone remodeling process toward normal cancellous bone, wherein the new cancellous bone ratio gradually tapers down to about 30% after 12 weeks.

Approaches to promoting bone marrow mesenchymal stem cell osteogenesis on orthopedic implant surface

Bone marrow-derived mesenchymal stem cells (BMSCs) play a critical role in the osseointegration of bone and orthopedic implant. However, osseointegration between the Ti-based implants and the surrounding bone tissue must be improved due to titanium’s inherent defects. Surface modification stands out as a versatile technique to create instructive biomaterials that can actively direct stem cell fate. Here, we summarize the current approaches to promoting BMSC osteogenesis on the surface of titanium and its alloys. We will highlight the utilization of the unique properties of titanium and its alloys in promoting tissue regeneration, and discuss recent advances in understanding their role in regenerative medicine. We aim to provide a systematic and comprehensive review of approaches to promoting BMSC osteogenesis on the orthopedic implant surface.

A review of the latest insights into the mechanism of action of strontium in bone

Interest in strontium (Sr) has persisted over the last three decades due to its unique mechanism of action: it simultaneously promotes osteoblast function and inhibits osteoclast function. While this mechanism of action is strongly supported by in vitro studies and small animal trials, recent large-scale clinical trials have demonstrated that orally administered strontium ranelate (SrRan) may have no anabolic effect on bone formation in humans. Yet, there is a strong correlation between Sr accumulation in bone and reduced fracture risk in post-menopausal women, suggesting Sr acts via a purely physiochemical mechanism to enhance bone strength. Conversely, the local administration of Sr with the use of modified biomaterials has been shown to enhance bone growth, osseointegration and bone healing at the bone-implant interface, to a greater degree than Sr-free materials. This review summarizes current knowledge of the main cellular and physiochemical mechanisms that underly Sr's effect in bone, which center around Sr's similarity to calcium (Ca). We will also summarize the main controversies in Sr research which cast doubt on the 'dual-acting mechanism'. Lastly, we will explore the effects of Sr-modified bone-implant materials both in vitro and in vivo, examining whether Sr may act via an alternate mechanism when administered locally.

Novel calcium phosphate coated calcium silicate-based cement: in vitro evaluation

Calcium silicate-based cements are known for their wide applications in dentistry and orthopedics. The alkaline pH (up to 12) of these cements limits their application in other orthopedic areas. In this study, the effect of dicalcium phosphate dihydrate (DCPD) coating on set cement on pH reduction and biocompatibility improvement was examined. Samples with 0 and 10 weight ratio DCPD were prepared and characterized by XRD, FTIR, and SEM. The DCPD coating on the set cement was performed by a 7 d immersion in 1% monocalcium phosphate (MCP) solution and characterized by XRD, FTIR, SEM, and EDX. Also, the compressive strength and cytotoxicity of the samples were tested. The results showed that DCPD coating did not significantly change the compressive strength of the cement, but by decreasing the pH of the culture medium to the physiological range, it led to enhance adhesion, spreading and proliferation of human osteosarcoma cell line (Saos-2). The novel DCPD coated calcium silicate-based cement could be served as a bulk or porous bone substitute and scaffold.

A surface-engineered multifunctional TiO2 based nano-layer simultaneously elevates the corrosion resistance, osteoconductivity and antimicrobial property of a magnesium alloy

Magnesium biometals exhibit great potentials for orthopeadic applications owing to their biodegradability, bioactive effects and satisfactory mechanical properties. However, rapid corrosion of Mg implants in vivo combined with large amount of hydrogen gas evolution is harmful to bone healing process which seriously confines their clinical applications. Enlightened by the superior biocompatibility and corrosion resistance of passive titanium oxide layer automatically formed on titanium alloy, we employ the Ti and O dual plasma ion immersion implantation (PIII) technique to construct a multifunctional TiO₂ based nano-layer on ZK60 magnesium substrates for enhanced corrosion resistance, osteoconductivity and antimicrobial activity. The constructed nano-layer (TiO₂/MgO) can effectively suppress degradation rate of ZK60 substrates in vitro and still maintain 94% implant volume after post-surgery eight weeks. In animal study, a large amount of bony tissue with increased bone mineral density and trabecular thickness is formed around the PIII treated group in post-operation eight weeks. Moreover, the newly formed bone in the PIII treated group is well mineralized and its mechanical property almost restores to the level of that of surrounding mature bone. Surprisingly, a remarkable killing ratio of 99.31% against S. aureus can be found on the PIII treated sample under ultra-violet (UV) irradiation which mainly attributes to the oxidative stress induced by the reactive oxygen species (ROS). We believe that this multifunctional TiO₂ based nano-layer not only controls the degradation of magnesium implant, but also regulates its implant-to-bone integration effectively. STATEMENT OF SIGNIFICANCE: Rapid corrosion of magnesium implants is the major issue for orthopaedic applications. Inspired by the biocompatibility and corrosion resistance of passive titanium oxide layer automatically formed on titanium alloy, we construct a multifunctional TiO₂/MgO nanolayer on magnesium substrates to simultaneously achieve superior corrosion resistance, satisfactory osteoconductivity in rat intramedullary bone defect model and excellent antimicrobial activity against S. aureus under UV irradiation. The current findings suggest that the specific TiO₂/MgO nano-layer on magnesium surface can achieve the three objectives aforementioned and we believe this study can demonstrate the potential of biodegradable metals for future clinical applications.

Off-Stoichiometric Reactions at the Cell-Substrate Biomolecular Interface of Biomaterials: In Situ and Ex Situ Monitoring of Cell Proliferation, Differentiation, and Bone Tissue Formation

The availability of osteoinductive biomaterials has encouraged new therapies in bone regeneration and has potentially triggered paradigmatic shifts in the development of new implants in orthopedics and dentistry. Among several available synthetic biomaterials, bioceramics have gained attention for their ability to induce mesenchymal cell differentiation and successive bone formation when implanted in the human body. However, there is currently a lack of understanding regarding the fundamental biochemical mechanisms by which these materials can induce bone formation. Phenomenological studies of retrievals have clarified the final effect of bone formation, but have left the chemical interactions at the cell-material interface uncharted. Accordingly, the knowledge of the intrinsic material properties relevant for osteoblastogenesis and osteoinduction remains incomplete. Here, we systematically monitored in vitro the chemistry of mesenchymal cell metabolism and the ionic exchanges during osteoblastogenesis on selected substrates through conventional biological assays as well as via in situ and ex situ spectroscopic techniques. Accordingly, the chemical behavior of different bioceramic substrates during their interactions with mesenchymal cells could be unfolded and compared with that of biomedical titanium alloy. Our goal was to clarify the cascade of chemical equations behind the biological processes that govern osteoblastogenic effects on different biomaterial substrates.

Fabrication of magnesium/zinc-metal organic framework on titanium implants to inhibit bacterial infection and promote bone regeneration

The residual bacteria in the second revision surgery caused by infection would further lead to the failure of the implantation. Pathogenic bacteria adhesion to an implant surface not only interfere the functions of bone-formation related cells, but also activate the host immune system, thus resulting in inflammation and osteogenesis inhibition. Thus, to fabricate multifunctional (antibacterial, anti-inflammation and pro-osteogenesis) titanium implants is essential to address this issue. In this work, hybrid magnesium/zinc-metal organic framework (Mg/Zn-MOF74) coating was constructed on alkali-heat treated titanium (AT) surface. The hybrid Mg/Zn-MOF74 coating displayed good stability and its stability was related to the content of Zn²⁺. The MOF74-modified samples were sensitive to bacterial acid microenvironment and displayed strong antibacterial ability against both Escherichia coli and Staphylococcus aureus due to the degradation of MOF74 coating, leading to alkaline microenvironment (about pH 8.0) and degradation products (2,5-dihydroxyterephthalic acid and Zn²⁺). The coating also showed good early anti-inflammatory property to native Ti substrates. In vivo results further verified that AT-Mg/Zn3 implants had high antibacterial and anti-inflammatory properties at early stage of implantation, and greatly improved new bone formation around implants both at non-infected and infected femur sites.

Three-Dimensional Printing of Biodegradable Piperazine-Based Polyurethane-Urea Scaffolds with Enhanced Osteogenesis for Bone Regeneration

Synthetic biodegradable polymeric scaffolds with uniformly interconnected pore structure, appropriate mechanical properties, excellent biocompatibility, and even enhanced osteogenesis ability are urgently required for in situ bone regeneration. In this study, for the first time, a series of biodegradable piperazine (PP)-based polyurethane-urea (P-PUU) scaffolds with a gradient of PP contents were developed by air-driven extrusion 3D printing technology. The P-PUU ink of 60 wt % concentration was demonstrated to have appropriate viscosity for scaffold fabrication. The 3D-printed P-PUU scaffolds exhibited an interconnected porous structure of about 450 μm in macropore size and about 75% in porosity. By regulating the contents of PP in P-PUU scaffolds, their mechanical properties could be moderated, and P-PUU1.4 scaffolds with the highest PP contents exhibited the highest compressive modulus (155.9 ± 5.7 MPa) and strength (14.8 ± 1.1 MPa). Moreover, both in vitro and in vivo biological results suggested that the 3D-printed P-PUU scaffolds possessed excellent biocompatibility and osteoconductivity to facilitate new bone formation. The small molecular PP itself was confirmed for the first time to regulate osteogenesis of osteoblasts in a dose-dependent manner and the optimum concentration for osteoconductivity was about ∼0.5 mM, which suggests that PP molecules, together with the mechanical behavior, nitrogen-contents, and hydrophilicity of P-PUUs, play an important role in enhancing the osteoconductive ability of P-PUU scaffolds. Therefore, the 3D-printed P-PUU scaffolds, with suitable interconnected pore structure, appropriate mechanical properties, and intrinsically osteoconductive ability, should provide a promising alternative for bone regeneration.

Spatial Distribution of Biomaterial Microenvironment pH and Its Modulatory Effect on Osteoclasts at the Early Stage of Bone Defect Regeneration

It is generally accepted that biodegradable materials greatly influence the nearby microenvironment where cells reside; however, the range of interfacial properties has seldom been discussed due to technical bottlenecks. This study aims to depict biomaterial microenvironment boundaries by correlating interfacial H⁺ distribution with surrounding cell behaviors. Using a disuse-related osteoporotic mouse model, we confirmed that the abnormal activated osteoclasts could be suppressed under relatively alkaline conditions. The differentiation and apatite-resorption capability of osteoclasts were "switched off" when cultured in titrated material extracts with pH values higher than 7.8. To generate a localized alkaline microenvironment, a series of borosilicates were fabricated and their interfacial H⁺ distributions were monitored spatiotemporally by employing noninvasive microtest technology. By correlating interfacial H⁺ distribution with osteoclast "switch on/off" behavior, the microenvironment boundary of the tested material was found to be 400 ± 50 μm, which is broader than the generally accepted value, 300 μm. Furthermore, osteoporotic mice implanted with materials with higher interfacial pH values and boarder effective ranges had lower osteoclast activities and a thicker new bone. To conclude, effective proton microenvironment boundaries of degradable biomaterials were depicted and a weak alkaline microenvironment was shown to promote regeneration of osteoporotic bones possibly by suppressing abnormal activated osteoclasts.

Effect of Local Alkaline Microenvironment on the Behaviors of Bacteria and Osteogenic Cells

The interactions between material surfaces and bacteria/cells have been widely investigated, based on which biomaterials with antibacterial and osteogenic abilities can be designed to conquer implant failures. The pH of environments is known to affect bacterial growth and bone formation/resorption, and it is possible that the antibacterial and osteogenic abilities of biomaterials can be simultaneously improved by regulating their surface alkalinity. Herein, we fabricated many kinds of films with various alkalinity levels on titanium surface to explore the effect of local alkaline microenvironments around material surfaces on the behaviors of bacteria and osteogenic cells. Both Gram-positive and -negative bacteria were cultured on sample surfaces to investigate their antibacterial effects. Cell adhesion, proliferation, and alkaline phosphatase (ALP) activities were investigated by culturing both bone mesenchymal stem cells (MSCs) and osteoblast cells on sample surfaces. The results show that an appropriate local alkaline environment can effectively inhibit the growth of both Gram-positive and -negative bacteria through inactivating ATP synthesis and inducing oxidative stress. Meanwhile, it can promote the osteogenic differentiation of bone MSCs and enhance the proliferation and ALP activities of osteoblast cells. In conclusion, material surfaces endowed with appropriate alkalinity can possess antibacterial and osteogenic properties, which provide a novel strategy to design multifunctional biomaterials for bone generation.

The development of collagen based composite scaffolds for bone regeneration

Bone is consisted of bone matrix, cells and bioactive factors, and bone matrix is the combination of inorganic minerals and organic polymers. Type I collagen fibril made of five triple-helical collagen chains is the main organic polymer in bone matrix. It plays an important role in the bone formation and remodeling process. Moreover, collagen is one of the most commonly used scaffold materials for bone tissue engineering due to its excellent biocompatibility and biodegradability. However, the low mechanical strength and osteoinductivity of collagen limit its wider applications in bone regeneration field. By incorporating different biomaterials, the properties such as porosity, structural stability, osteoinductivity, osteogenicity of collagen matrixes can be largely improved. This review summarizes and categorizes different kinds of biomaterials including bioceramic, carbon and polymer materials used as components to fabricate collagen based composite scaffolds for bone regeneration. Moreover, the possible directions of future research and development in this field are also proposed.

•

Materials to incorporate collagen scaffolds for bone regeneration are summarized.

•

Bioceramics, carbon and polymer materials can increase the mechanical properties and osteogenesis.

•

The limitation of collagen based materials is analyzed and the prospects of future research are presented.

Development of polyurethanes for bone repair

The purpose of this paper is to review recent developments on polyurethanes aimed at the design, synthesis, modifications, and biological properties in the field of bone tissue engineering. Different polyurethane systems are presented and discussed in terms of biodegradation, biocompatibility and bioactivity. A comprehensive discussion is provided of the influence of hard to soft segments ratio, catalysts, stiffness and hydrophilicity of polyurethanes. Interaction with various cells, behavior in vivo and current strategies in enhancing bioactivity of polyurethanes are described. The discussion on the incorporation of biomolecules and growth factors, surface modifications, and obtaining polyurethane-ceramics composites strategies is held. The main emphasis is placed on the progress of polyurethane applications in bone regeneration, including bone void fillers, shape memory scaffolds, and drug carrier.

The interfacial pH of acidic degradable polymeric biomaterials and its effects on osteoblast behavior

A weak alkaline environment is established to facilitate the growth of osteoblasts. Unfortunately, this is inconsistent with the application of biodegradable polymer in bone regeneration, as the degradation products are usually acidic. In this study, the variation of the interfacial pH of poly (D, L-lactide) and piperazine-based polyurethane ureas (P-PUUs), as the representations of acidic degradable materials, and the behavior of osteoblasts on these substrates with tunable interfacial pH were investigated in vitro. These results revealed that the release of degraded products caused a rapid decrease in the interfacial pH, and this could be relieved by the introduction of alkaline segments. On the contrary, when culturing with osteoblasts, the variation of the interfacial pH revealed an upward tendency, indicating that cell could construct the microenvironment by secreting cellular metabolites to satisfy its own survival. In addition, the behavior of osteoblasts on substrates exhibited that P-PUUs with the most PP units were better for cell growth and osteogenic differentiation of cells. This is due to the hydrophilic surface and the moderate N% in P-PUUs, key factors in the promotion of the early stages of cellular responses, and the interfacial pH contributing to the enhanced effect on osteogenic differentiation.

Akermanite used as an alkaline biodegradable implants for the treatment of osteoporotic bone defect

In osteoporosis scenario, tissue response to implants is greatly impaired by the deteriorated bone regeneration microenvironment. In the present study, a Mg-containing akermanite (Ak) ceramic was employed for the treatment of osteoporotic bone defect, based on the hypothesis that both beneficial ions (e.g. Mg2+ect.) released by the implants and the weak alkaline microenvironment pH (μe-pH) it created may play distinct roles in recovering the abnormal bone regeneration by stimulating osteoblastic anabolic effects. The performance of Ak, β-tricalcium phosphate (β-TCP) and Hardystone (Har) in healing a 3 mm bone defect on the ovariectomized (OVX) osteoporotic rat model was evaluated. Our results indicated that, there's more new bone formed in Ak group than in β-TCP or Har group at week 9. The initial μe-pHs of Ak were significantly higher than that of the β-TCP and Blank group, and this weak alkaline condition was maintained till at least 9 weeks post-surgery. Increased osteoblastic activity which was indicated by higher osteoid secretion was observed in Ak group at week 4 to week 9. An intermediate layer which was rich in phosphorus minerals and bound directly to the new forming bone was developed on the surface of Ak. In a summary, our study demonstrates that Ak exhibits a superior bone regenerative performance under osteoporosis condition, and might be a promising candidate for the treatment of osteoporotic bone defect and fracture.

Plasma Surface Modification of Polyhedral Oligomeric Silsequioxane-Poly(carbonate-urea) Urethane with Allylamine Enhances the Response and Osteogenic Differentiation of Adipose-Derived Stem Cells

This study present amino functionalization of biocompatible polymer polyhedral oligomeric silsequioxane-poly(carbonate-urea) urethane (POSS-PCU) using plasma polymerization process to induce osteogenic differentiation of adipose derived stem cells (ADSCs). Optimization of plasma polymerization process was carried out keeping cell culture application in mind. Thus, samples were rigorously tested for retention of amino groups under both dry and wet conditions. Physio-chemical characterization was carried out using ninhydrin test, X-ray photon spectroscopy, scanning electron microscopy, and static water contact analysis. Results from physio chemical characterization shows that functionalization of the amino group is not stable under wet conditions and optimization of plasma process is required for stable bonding of amino groups to the POSS-PCU polymer. Optimized samples were later tested in vitro in short and long-term culture to study differentiation of ADSCs on amino modified samples. Short-term cell culture shows that initial cell attachment was significantly (p < 0.001) improved on amine modified samples (NH2-POSS-PCU) compared to unmodified POSS-PCU. NH2-POSS-PCU samples also facilitates osteogenic differentiation of ADSCs as confirmed by immunological staining of cells for extracellular markers such as collagen Type I and osteopontin. Quantification of total collagen and ALP activity also shows significant (p < 0.001) increase on NH2-POSS-PCU samples compared to unmodified POSS-PCU. A pilot study also confirms that these optimized amino modified POSS-PCU samples can further be functionalized using bone inducing peptide such as KRSR using conventional wet chemistry. This further provides an opportunity for biofunctionalization of the polymer for various tissue specific applications.