Molecular dynamics study of the effect of calcium ions on the monolayer of SDC and SDSn surfactants at the vapor/liquid interface

Experimental and simulation-based characterization of surfactant adsorption layers at fluid interfaces

Adsorption of surfactants to fluid interfaces occurs in numerous technological and daily-life contexts. The coverage at the interface and other properties of the formed adsorption layers determine the performance of a surfactant with regard to the desired application. Given the importance of these applications, there is a great demand for the comprehensive characterization and understanding of surfactant adsorption layers. In this review, we provide an overview of suitable experimental and simulation-based techniques and review the literature in which they were used for the investigation of surfactant adsorption layers. We come to the conclusion that, while these techniques have been successfully applied to investigate Langmuir monolayers of water-insoluble surfactants, their application to the study of Gibbs adsorption layers of water-soluble surfactants has not been fully exploited. Finally, we emphasize the great potential of these methods in providing a deeper understanding of the behavior of soluble surfactants at interfaces, which is crucial for optimizing their performance in various applications.

Review of the Interfacial Structure and Properties of Surfactants in Petroleum Production and Geological Storage Systems from a Molecular Scale Perspective

Surfactants play a crucial role in tertiary oil recovery by reducing the interfacial tension between immiscible phases, altering surface wettability, and improving foam film stability. Oil reservoirs have high temperatures and high pressures, making it difficult and hazardous to conduct lab experiments. In this context, molecular dynamics (MD) simulation is a valuable tool for complementing experiments. It can effectively study the microscopic behaviors (such as diffusion, adsorption, and aggregation) of the surfactant molecules in the pore fluids and predict the thermodynamics and kinetics of these systems with a high degree of accuracy. MD simulation also overcomes the limitations of traditional experiments, which often lack the necessary temporal-spatial resolution. Comparing simulated results with experimental data can provide a comprehensive explanation from a microscopic standpoint. This article reviews the state-of-the-art MD simulations of surfactant adsorption and resulting interfacial properties at gas/oil-water interfaces. Initially, the article discusses interfacial properties and methods for evaluating surfactant-formed monolayers, considering variations in interfacial concentration, molecular structure of the surfactants, and synergistic effect of surfactant mixtures. Then, it covers methods for characterizing microstructure at various interfaces and the evolution process of the monolayers' packing state as a function of interfacial concentration and the surfactants' molecular structure. Next, it examines the interactions between surfactants and the aqueous phase, focusing on headgroup solvation and counterion condensation. Finally, it analyzes the influence of hydrophobic phase molecular composition on interactions between surfactants and the hydrophobic phase. This review deepened our understanding of the micro-level mechanisms of oil displacement by surfactants and is beneficial for screening and designing surfactants for oil field applications.

Anion Competition at Positively Charged Surfactant Monolayers

Interactions of anions with hydrophobic surfaces of proteins and water-soluble polymers depend on the ability of the ions to shed their hydration shells. At positively charged surfactant monolayers, the interactions of anions are less well understood. Due to the interplay of electrostatic surface forces, hydration effects, and ion-ion interactions in the electrostatic double layer, a comprehensive microscopic picture remains elusive. Herein, we study the interactions of chloride, bromide, and a mixture of these two anions at the aqueous interface of dihexadecyldimethylammonium (DHDA+) and dioctadecyldimethylammonium (DODA+) cationic monolayers. Using molecular dynamics simulations and three surface-sensitive X-ray scattering techniques, we demonstrate that bromide interacts preferentially over chloride with both monolayers. The structure of the two monolayers and their interfacial electron density profiles obtained from the simulations quantitatively reproduce the experimental data. We observe that chloride and bromide form contact ion pairs with the quaternary ammonium groups on both monolayers. However, ion pairing with bromide leads to a greater reduction in the number of water molecules hydrating the anion, resulting in more energetically stable ion pairs. This leads to long-range (>3 nm) lateral correlations between bromide ions on the structured DODA+ monolayer. These observations indicate that ion hydration is the dominant factor determining the interfacial electrolyte structure.

Molecular Dynamics Simulation of the Effects of Complex Surfactants on Oil-Water Interaction and Aggregation Characteristics at the Interface

In response to the problem of complex interaction between oil and water in the oil-water interface, especially heavy oil and water, this study investigated the effects of complex surfactants on the interaction of two phases and their aggregation characteristics by molecular dynamics simulation. The results showed that increasing the content of sodium lauryl polyether carboxylate (AEC-9Na) was beneficial to the coordination between it and alkyl glycoside (APG-10), improved the interfacial activity, and enhanced the interfacial stability of the composite system, and the best effect was achieved when AEC-9Na:APG-10 = 8:2. The thickness of the oil and water film on the oil-water interface was irregular. When the concentration of AEC-9Na was lower than that of APG-10, the total thickness of the interfacial film (ttotal) first increased. When the content of AEC-9Na is higher, a large number of sodium ions were adsorbed near the -COO- group of AEC-9Na, which will polarize out of the hydration layer structure and attract water molecules from the second hydration layer on the heavy oil surface to the first hydration layer through electrostatic interaction. Then, the thickness of the interface film was compressed, and the interface film was reduced. When the ratio increased to 10:0, the oil and water phase competed to adsorb surfactant molecules, and the headgroup tended to lay on the interface. Moreover, the hydrophilicity of the surfactant layer was weakened, and the thickness of the water film decreased. The distribution of surfactant was looser than 8:2, the light components of heavy oil molecules (saturated and aromatic hydrocarbons) entered the gap between surfactants in large quantities, and the hydrophobic tail chain tended to be laid on the oil-water interface. The oleophilicity of the surfactant layer increased, and the thickness of the oil film remarkably increased, so the total thickness of the interface film increased again.

Synergistic Effect of Salt and Anionic Surfactants on Interfacial Tension Reduction: Insights from Molecular Dynamics Simulations

Surfactants are commonly utilized in chemical flooding processes alongside salt to effectively decrease interfacial tension (IFT). However, the underlying microscopic mechanism for the synergistic effect of salt and surfactants on oil displacement remains ambiguous. Herein, the structure and properties of the interface between water and n-dodecane are studied by means of molecular dynamics simulations, considering three types of anionic surfactants and two types of salts. As the salt concentration (ρsalt) increases, the IFT first decreases to a minimum value, followed by a subsequent increase to higher values. The salt ions reduce the IFT only at low ρsalt due to the salt screening effect and ion bridging effect, both of which contribute to a decrease in the nearest head-to-head distance of surfactants. By incorporating salt doping, the IFTs can be reduced by at most 5%. Notably, the IFTs of different surfactants are mainly determined by the hydrogen bond interactions between oxygen atoms in the headgroup and water molecules. The presence of a greater number of oxygen atoms corresponds to lower IFT values. Specifically, for alkyl ethoxylate sulfate, the ethoxy groups play a crucial role in reducing the IFTs. This study provides valuable insights into formulating anionic surfactants that are applicable to oil recovery processes in petroleum reservoirs using saline water.

Synthesis of Polyether Carboxylate and the Effect of Different Electrical Properties on Its Viscosity Reduction and Emulsification of Heavy Oil

Heavy oil exploitation needs efficient viscosity reducers to reduce viscosity, and polyether carboxylate viscosity reducers have a significant viscosity reduction effect on heavy oil. Previous work has studied the effect of different side chain lengths on this viscosity reducer, and now a series of polyether carboxylate viscosity reducers, including APAD, APASD, APAS, APA, and AP5AD (the name of the viscosity reducer is determined by the name of the desired monomer), with different electrical properties have been synthesized to investigate the effect of their different electrical properties on viscosity reduction performance. Through the performance tests of surface tension, contact angle, emulsification, viscosity reduction, and foaming, it was found that APAD viscosity reducers had the best viscosity reduction performance, reducing the viscosity of heavy oil to 81 mPa·s with a viscosity reduction rate of 98.34%, and the worst viscosity reduction rate of other viscosity reducers also reached 97%. Additionally, APAD viscosity reducers have the highest emulsification rate, and the emulsion formed with heavy oil is also the most stable. The net charge of APAD was calculated from the molar ratio of the monomers and the total mass to minimize the net charge. While the net charge of other surfactants was higher. It shows that the amount of the surfactant's net charge affects the surfactant's viscosity reduction effect, and the smaller the net charge of the surfactant itself, the better the viscosity reduction effect.

Transport of Heptane Molecules across Water-Vapor Interfaces Laden with Surfactants

Molecular transport across liquid-vapor interfaces covered by surfactant monolayers plays a key role in applications such as fire suppression by foams. The molecular understanding of such transport, however, remains incomplete. This work uses molecular dynamics simulations to investigate the heptane transport across water-vapor interfaces populated with sodium dodecyl sulfate (SDS) surfactants. Heptane molecules' potential of mean force (PMF) and local diffusivity profiles across SDS monolayers with different SDS densities are calculated to obtain heptane's transport resistance. We show that a heptane molecule experiences a finite resistance as it crosses water-vapor interfaces covered by SDS. Such interfacial transport resistance is contributed significantly by heptane molecules' high PMF in the SDS headgroup region and their slow diffusion there. This resistance increases linearly as the SDS density rises from zero but jumps as the density approaches saturation when its value is equivalent to that afforded by a 5 nm thick layer of bulk water. These results are understood by analyzing the micro-environment experienced by a heptane molecule crossing SDS monolayers and the local perturbation it brings to the monolayers. The implications of these findings for the design of surfactants to suppress heptane transport through water-vapor interfaces are discussed.

Molecular mechanism study on the effect of nonionic surfactants with different degrees of ethoxylation on the wettability of anthracite

A serious risk to the production safety of coal mines is coal dust. The wettability of coal may be successfully changed by adding surfactants to water. However, the creation of very effective dust suppressants is constrained by the lack of knowledge about the microscopic interaction mechanism between coal dust and surfactants. In this investigation, we explained macroscopic experimental phenomena from a molecular perspective. The lauryl polyoxyethylene ethers (C₁₂ (EO)_n, n = 7,15,23) were selected. The macromolecular model of anthracite with 55 different components was constructed. Surface tension experiments and hydrophilic lipophilic balance (HLB) calculations showed that the ability of surface hydrophilicization followed the order of C₁₂ (EO)₇<C₁₂ (EO)₁₅<C₁₂ (EO)₂₃. Contact angle experiment, XPS and FTIR experiments proved that after the surfactants were adsorbed on the surface of anthracite, the content of carbon element decreased and the content of oxygen element increased, indicating the enhanced surface hydrophilicity. The simulation results showed that with the degree of ethoxylation increases, the adsorption strength of surfactants becomes stronger, and the hydrophilic head group of surfactant on anthracite surface is more uniformly distributed. The greater the degree of ethoxylation, the more powerfully the modified coal surface can bind to water molecules.

Influence of the Branched Structure of Polyoxyethylene Units in Nonionic Surfactants on the Wettability of Anthracite: A Combined Modeling and Experimental Study

Coal dust is a significant concern to the safety of coal mine operations. The wettability of coal can be effectively altered by adding surfactants to water. The development of high-efficiency dust suppressants is hampered by a lack of understanding of the microscopic interaction process between coal dust and surfactants. In this investigation, the influence of the branched structure of the polyoxyethylene unit in nonionic surfactants on the wettability of anthracite surfaces was evaluated by combining the modeling study and experimental research. The macromolecular model of Jincheng anthracite with 55 different components (C7730H3916O133N123S25) was constructed. Lauryl polyoxyethylene ether C12(EO)20 and Tween 20 were selected. The simulation results showed that due to the branched structure of polyoxyethylene, the surface of anthracite after adsorption by Tween 20 is more hydrophilic. Further analysis found that the adsorption configuration of Tween 20 is that the hydrophilic head group covers the hydrophobic tail chain, while the adsorption configuration of C12(EO)20 is that the hydrophobic tail chain covers the hydrophilic head group. The network structure formed by Tween 20 is relatively loose, and the surface is rougher. The network structure formed by C12(EO)20 is denser. Water molecules have a higher aggregation degree near Tween 20 and stronger permeability, and more hydrogen bonds are formed. The existence state of carbon and oxygen elements on the surface of modified coal was analyzed by XPS experiment, which confirmed the adsorption structure obtained by molecular simulation.

Computational Study on the Microscopic Adsorption Characteristics of Linear Alkylbenzene Sulfonates with Different Chain Lengths on Anthracite Surface

In order to explore the influence of different lengths of hydrophobic carbon chains on the diffusion characteristics of surfactants on the surface of anthracite, six linear alkyl benzene sulfonates with different hydrophobic carbon chain lengths were selected (mC, m = 8, 10, 12, 14, 16, 18; m represents the numbers of carbon atoms in the hydrophobic carbon chain), and molecular dynamics (MD) simulations were adopted. Models of surfactant-anthracite, surfactant-graphite layer, and water-surfactant-anthracite were constructed. After analyzing a series of properties such as adsorption energy, diffusion coefficient, radial distribution function (RDF), and hydrophobic tail order parameters, it was found that 12C had the highest adsorption strength on the surface of anthracite; the reason was that 12C had the highest degree of aggregation near the oxygen-containing functional groups on the surface of anthracite. Further studies had found that the hydrophobic tail chain of 12C had the strongest isotropy. The study fills the gap in the systematic study of the diffusion characteristics of linear alkylbenzene sulfonates (LAS) with different chain lengths on the surface of anthracite, enriches and develops the basic theory of coal wettability, and also provides technical ideas for the design of new surfactants and new dust suppression agents.

Microscopic Diffusion Characteristics of Linear Alkylbenzene Sulfonates on the Surface of Anthracite: The Influence of Different Attachment Sites of Benzene Ring in the Backbone

In order to explore the effect of the attachment site of the benzene ring in the backbone of the surfactant on its diffusion characteristics on the surface of anthracite, the molecular dynamics simulation method was used, and the four isomers (m-C16, m = 2,4,6,8; m represents the attachment site of the benzene ring in the backbone) of sodium hexadecyl benzene sulfonate (SHS) were selected. Binary models of surfactant/anthracite, surfactant/graphene modified by oxygen-containing functional groups, and a ternary model of water/surfactant/anthracite were constructed. By analyzing a series of properties such as interaction energy, contact surface area, relative concentration distribution, radial distribution function, hydrophobic tail chain order parameter, etc., it is concluded that the adsorption strength of 4-C16 on the surface of anthracite is the highest; the reason is that 4-C16 has the highest degree of aggregation near the oxygen-containing functional groups on the surface of anthracite. Further investigations find that 4-C16 can be densely covered on the ketone group, and the longer branch chain of 4-C16 has the highest degree of order in the Z-axis direction.

Ion Valency and Concentration Effect on the Structural and Thermodynamic Properties of Brine-Decane Interfaces with Anionic Surfactant (SDS)

Salt ion valency and concentration vary in actual oil reservoirs, which play an important role in the functionalities of surfactant formula during chemical flooding processes to enhance oil recovery. Herein, we report a molecular dynamics (MD) study to investigate the ion valency and concentration effect on the structural and thermodynamic properties of brine-decane interfaces with anionic surfactant (SDS), under typical reservoir conditions (353 K and 200 bar). We use two different cations (Na⁺ and Ca²⁺) and a wide range of ion concentrations (up to 3.96 M) to simulate reservoir conditions. We find that ion valency has a significant effect on the molecular configurations, which further influences the thermodynamic properties. Ca²⁺ ions can have a strong adsorption at the interface due to the strong electrostatic interactions between Ca²⁺ ions and SDS, which also results in the Cl^- ion enrichment at the interface. Furthermore, Ca²⁺ ions can form pentagon-like SDS-Ca²⁺ complexes through SDS-Ca²⁺-SDS cation bridging, which renders a nonuniform distribution of SDS at the interface. On the other hand, the cation bridging density monotonically increases as ion concentration increases for the systems without Ca²⁺ ions, while first increases, then decreases for the systems with Ca²⁺ ions. This is because the accumulation of Cl^- ions at the interface at high salt concentrations can melt SDS-Ca²⁺ complexes. This work should provide new insights into the structural and thermodynamic properties of brine-oil interfaces with an anionic surfactant, which can facilitate the optimization of chemical flooding processes.

Effect of Sodium Dodecyl Sulfonate on the Foam Stability and Adsorption Configuration of Dodecylamine at the Gas-Liquid Interface

In this study, the effect of sodium dodecyl sulfonate (SDS) on the foam stability of dodecylamine (DDA) and on its adsorption configuration at the gas-liquid interface was investigated. Froth stability experiments, surface tension measurements, time-of-flight secondary-ion mass spectrometry measurements, and molecular dynamics simulation calculations were performed in this investigation. The results revealed that the foam stability of DDA solution was extremely strong, and the addition of SDS could decrease the foam stability when the concentration of DDA was less than a certain value. The decrease in foam stability could be ascribed to several reasons, namely, the big cross-sectional area of SDS at the gas-liquid interface and low adsorption capacity of surfactants at the gas-liquid interface, the high surface tension, the change in the double-layer structure, the small thickness of the gas-liquid interfacial layer, the weak interaction intensity between the head groups of the surfactants and the water molecules, the strong movement ability of the water molecules around the head groups, and the sparse and less upright arrangement configuration of molecules at the gas-liquid interface. These findings can greatly help in solving the strong foam stability problem in DDA flotation and provide a method for reducing foam stability.

Revealing the Origin of the Specificity of Calcium and Sodium Cations Binding to Adsorption Monolayers of Two Anionic Surfactants

The studied anionic surfactants linear alkyl benzene sulfonate (LAS) and sodium lauryl ether sulfate (SLES) are widely used key ingredients in many home and personal care products. These two surfactants are known to react very differently with multivalent counterions, including Ca²⁺. This is explained by a stronger interaction of the calcium cation with the LAS molecules, compared to SLES. The molecular origin of this difference in the interactions remains unclear. In the current study, we conduct classical atomistic molecular dynamics simulations to compare the ion interactions with the adsorption layers of these two surfactants, formed at the vacuum-water interface. Trajectories of 150 ns are generated to characterize the adsorption layer structure and the binding of Na⁺ and Ca²⁺ ions. We found that both surfactants behave similarly in the presence of Na⁺ ions. However, when Ca²⁺ is added, Na⁺ ions are completely displaced from the surface with adsorbed LAS molecules, while this displacement occurs only partially for SLES. The simulations show that the preference of Ca²⁺ to the LAS molecules is due to a strong specific attraction with the sulfonate head-group, besides the electrostatic one. This specific attraction involves significant reduction of the hydration shells of the interacting calcium cation and sulfonate group, which couple directly and form surface clusters of LAS molecules, coordinated around the adsorbed Ca²⁺ ions. In contrast, SLES molecules do not exhibit such specific interaction because the hydration shell around the sulfate anion is more stable, due to the extra oxygen atom in the sulfate group, thus precluding substantial dehydration and direct coupling with any of the cations studied.

Revisiting OPLS-AA Force Field for the Simulation of Anionic Surfactants in Concentrated Electrolyte Solutions

Hereby, we developed a set of nonbonded parameters within all-atom optimized potentials for liquid simulations (OPLS-AA) force field for the simulation of concentrated electrolyte solutions of anionic surfactants. More specifically, the aim of this paper is to assess the performance of five sets of atomic charges calculated using different population analyses (DDEC6, CHelpG, CHelpG-SMD, RESP, and CM5), as well as the original set of charges used in the literature for sodium dodecyl sulfate (SDS) simulation. Recently, Farafonov et al. have revised the SDS OPLS-AA force field; however, we were unable to obtain the experimental rodlike micelles using this parameter set on long time scale. In fact, the initial SDS bilayer micelle adopted a rodlike shape transiently and then broke down into spherical micelles. Updating OPLS-AA force field with DDEC6, CHelpG, and CHelpG-SMD charges resulted in stable rod micelles for a long simulation time (1 μs). The atomic charges of Farafonov (taken from Shelley et al.), RESP, and CM5 could not correctly describe SDS in concentrated electrolyte solutions. Analysis of the interaction of SDS with the counterions and solvent highlights the role of a balance of the intermolecular forces that must be met to describe adequately the anionic surfactant electrolyte solutions. Further, the optimization of the SDS Lennard-Jones parameters enabled the Farafonov set to properly reproduce the experimental rod micelle. In addition, we have examined the performance of different parameters of sodium ions: the first developed based on the Kirkwood-Buff integrals (KBI) and the second developed by Joung et al. The excessive ion pairing caused by KBI parameters screens significantly SDS-water interactions, which stabilize the rod micelle. Further, a tight interaction of the Na⁺-SDS head group resulted in stabilization of the bilayer micelle as observed in the case of Na⁺ parameters developed by Joung et al.

Interfacial Interaction Enhanced Rheological Behavior in PAM/CTAC/Salt Aqueous Solution-A Coarse-Grained Molecular Dynamics Study

Interfacial interactions within a multi-phase polymer solution play critical roles in processing control and mass transportation in chemical engineering. However, the understandings of these roles remain unexplored due to the complexity of the system. In this study, we used an efficient analytical method-a nonequilibrium molecular dynamics (NEMD) simulation-to unveil the molecular interactions and rheology of a multiphase solution containing cetyltrimethyl ammonium chloride (CTAC), polyacrylamide (PAM), and sodium salicylate (NaSal). The associated macroscopic rheological characteristics and shear viscosity of the polymer/surfactant solution were investigated, where the computational results agreed well with the experimental data. The relation between the characteristic time and shear rate was consistent with the power law. By simulating the shear viscosity of the polymer/surfactant solution, we found that the phase transition of micelles within the mixture led to a non-monotonic increase in the viscosity of the mixed solution with the increase in concentration of CTAC or PAM. We expect this optimized molecular dynamic approach to advance the current understanding on chemical-physical interactions within polymer/surfactant mixtures at the molecular level and enable emerging engineering solutions.

Adsorption of ionic surfactants at the air-water interface: The gap between theory and experiment

We review the experimental and theoretical results for the adsorption and structure of ionic surfactants at the air-liquid interface. The results show that ionic surfactants form thick adsorption layers at the interfacial region. We also review several adsorption models for ionic surfactants, which become increasingly complex as they capture the many features of adsorption layers. However, the adsorption layer structures determined by experiments and the structures predicted by models do not match because most models assume very thin adsorption layers. We show the discrepancies between measured and predicted surface properties and provide several explanations. We conclude that the mismatch in the adsorption layer structure provided by experiments and the structure provided by adsorption models is the main reason for the discrepancies in the surface excess and the surface potential.

Effects of Sodium and Magnesium Cations on the Aggregation of Chromonic Solutions Using Molecular Dynamics

Lyotropic chromonic liquid crystals (LCLCs) constitute a unique variety of water-soluble mesogens that spontaneously assemble into elongated aggregates, thereby resulting in the formation of liquid crystal phases depending on the temperature and concentration. The influence of ionic additives on the aggregation of LCLC has been extensively studied, but the molecular mechanisms governing these effects remain unclear. In this investigation, we perform atomistic molecular dynamics simulations of dilute sunset yellow (SSY) LCLC solutions doped with NaCl and MgCl₂ salts. Structural and dynamical properties of SSY hydration shells are considerably modified by the partial substitution of their H bonds with sodium/magnesium-sulfonate ion pairs. Although the intermolecular distance of ∼3.4 Å between SSY mesogens is preserved regardless of the ionic content, the growing number of ion pairs favors the reduction of the electrostatic repulsion between mesogens, increasing the length of SSY stacks. Moreover, magnesium cations exert the strongest electrostatic effects due to their higher hydration capabilities and acute electrostatic binding to SSY. For these reasons, experimental observations of dilute SSY solutions doped with Mg²⁺ exhibit higher nematic-to-isotropic transition temperatures than Na⁺. This work provides a fundamental understanding of the influence of ionic additives on the self-assembly of diluted LCLC solutions derived from the synergistic molecular mechanisms between mesogens, the solvent, and cations.

Sorption and desorption characteristics of anionic surfactants to soil sediments

Surfactants are important environmental chemicals due to their extensive domestic and industrial applications, such as subsurface organic pollution remediation and enhanced oil recovery. However, the interaction of surfactants with subsurface material particularly the desorption behavior of surfactants is less understood. Surfactant desorption is essential to control the fate and transport of surfactants as well as organic pollutants. In this study, the sorption and desorption of linear sodium dodecylbenzene sulfonate (SDBS) and sodium hexadecyl diphenyl oxide disulfonate (DPDS) with two types of soil sediment samples are compared. Sorption of surfactants can be modeled by hydrophobic sorption. Less DPDS sorption is observed at a higher aqueous concentration, which is attributed to the competition between surfactant micelles and sediment organic matter for DPDS sorption. A significant fraction of the sorbed surfactants resists desorption, and this is not a result of surfactant precipitation or desorption kinetics. Surfactant desorption behavior is similar to the irreversible desorption of hydrocarbons from soil with only half of the resistant phase surfactant being readily extracted by heated solvent extraction. The sorption/desorption data are interpreted with a molecular topology and irreversible sorption model. The knowledge of this study can be useful in understanding the environmental fate and transport of these common anionic surfactants. The methodology developed in this study can be expanded to study the sorptive nature of a wider range of surfactants in the environment.

Tuning the Surface Ordering of Self-Assembled Ionic Surfactants on Semiconducting Single-Walled Carbon Nanotubes: Concentration, Tube Diameter, and Counterions

We report direct spectroscopic measurements of the macromolecular organization of ionic surfactants on the surface of semiconducting single-walled carbon nanotubes (SWCNTs) within solution-processed thin films. By using vibrational sum frequency generation (VSFG) spectroscopy, sensitive measurements of interfacial surfactant ordering were obtained as a function of surfactant concentration for sodium dodecyl sulfate (SDS)-encapsulated (6,5) and (7,6) SWCNTs with and without excess electrolytes. Anionic surfactants are known to effectively stabilize SWCNTs. The current models suggest a strong influence of the dispersion conditions on the surfactant interfacial macromolecular organization and self-assembly. Direct experimental probes of such an organization using nanotubes of specific chirality are needed to validate the existing models. We found that as the bulk SDS concentration increases near the surfactant critical micelle concentration, the interfacial ordering increased, approaching the formation of cylindrical-like micelles with the nanotube at the core. At the higher surfactant concentrations measured here, the (6,5) SWCNTs produced more ordered structures relative to those with the (7,6) SWCNTs. The relatively larger-diameter (7,6) chiral tubes support enhanced van der Waals (vdW) interactions between the tube carbon surface and the surfactant methylene chain groups that likely increase the density of gauche defects. A new effect arises when the precursor solution is exposed to a small concentration of divalent Ca²⁺ counterions. We postulate that a salt-bridging configuration on such highly curved surfaces decreases the ordering of interfacial surfactant molecules, resulting in compact, disordered structures. However, this phenomenon was not observed with excess Na⁺ ions at the same ionic strength. Instead, a modest increase in surfactant ordering was observed with the excess monovalent electrolyte. These results provide new insights for thin film solution processing of vdW nanomaterials and demonstrate that VSFG is a sensitive probe of surfactant organization on nanostructures.

Interaction of testosterone-based compounds with dodecyl sulphate monolayers at the air–water interface

The encapsulation of testosterone enanthate into a sodium dodecyl sulphate monolayer.

Complex Formations between Surfactants and Polyelectrolytes of the Same Charge on a Water Surface

The mechanism of complex formation between surfactants and polyelectrolytes with the same charge on the water surface was investigated using molecular dynamics simulations and phase-sensitive sum-frequency generation vibrational spectroscopy. Although complex formation between highly charged surfactants and polyelectrolytes of the same charge is generally expected to be prohibited by the electrostatic repulsive force, our study shows that it is possible to form thermodynamically stable complexes when excess ions are present in the solution. We found that anionic partially hydrolyzed polyacrylamide (HPAM) could interact with anionic sodium dodecyl sulfate (SDS) on a water surface in the presence of salts. With excess Na⁺ ions in the solution, the charge screening effect allows HPAM to weakly interact with SDS via hydrogen bonds. In the presence of divalent Ca²⁺ ions, the surfactant and the polymer are strongly coupled by forming Ca²⁺ ion bridges and hydrogen bonds. Our calculation shows that the presence of Ca²⁺ ions creates a steep binding energy of ∼30 kJ/mol near the water surface. These results were qualitatively verified using phase-sensitive sum-frequency generation vibrational spectroscopy.

Molecular dynamics study of di-CF4 based reverse micelles in supercritical CO2

Reverse micelles (RMs) in supercritical CO₂ (scCO₂) are promising alternatives for organic solvents, especially when both polar and non-polar components are involved. Fluorinated surfactants, particularly double-chain fluorocarbon surfactants, are able to form well-structured RMs in scCO₂. The inherent self-assembly mechanisms of surfactants in scCO₂ are still subject to discussion. In this study, molecular dynamics simulations are performed to investigate the self-aggregation behavior of di-CF4 based RMs in scCO₂, and stable and spherical RMs are formed. The dynamics process and the self-assembly structure in the RMs reveal a three-step mechanism to form the RMs, that is, small RMs, rod-like RMs and fusion of the rod-like RMs. Hydrogen-bonds between headgroups and water molecules, and salt bridges linking Na⁺ ions, headgroups and water molecules enhance the interfacial packing efficiency of the surfactant. The results show that di-CF4 molecules have a high surfactant coverage at the RM interface, implying a high CO₂-philicity. This mainly results from bending of the short chain (C-COO-CH₂-(CF2)₃-CF3) due to the flexible carboxyl group. The microscopic insight provided in this study is helpful in understanding surfactant self-assembly phenomena and designing new CO₂-philic surfactants.

Draft genome sequence of Paenibacillus sp. strain A2

Paenibacillus sp. strain A2 is a Gram-negative rod-shaped bacterium isolated from a mixture of formation water and petroleum in Daqing oilfield, China. This facultative aerobic bacterium was found to have a broad capacity for metabolizing hydrocarbon and organosulfur compounds, which are the main reasons for the interest in sequencing its genome. Here we describe the features of Paenibacillus sp. strain A2, together with the genome sequence and its annotation. The 7,650,246 bp long genome (1 chromosome but no plasmid) exhibits a G+C content of 54.2 % and contains 7575 protein-coding and 49 RNA genes, including 3 rRNA genes. One putative alkane monooxygenase, one putative alkanesulfonate monooxygenase, one putative alkanesulfonate transporter and four putative sulfate transporters were found in the draft genome.

Tetraalkylammonium interactions with dodecyl sulfate micelles: a molecular dynamics study

2D number-density maps for S atoms of the polar head in the x–y plane.