Tailored vapor-phase growth of Cu(x)O-TiO2 (x = 1, 2) nanomaterials decorated with Au particles

Nanocomposite Marvels: Unveiling Breakthroughs in Photocatalytic Water Splitting for Enhanced Hydrogen Evolution

An overview of the significant innovations in photocatalysts for H2 development, photocatalyst selection criteria, and photocatalytic modifications to improve the photocatalytic activity was examined in this Review, as well as mechanisms and thermodynamics. A variety of semiconductors have been examined in a structured fashion, such as TiO2-, g-C3N4-, graphene-, sulfide-, oxide-, nitride-, oxysulfide-, oxynitrides, and cocatalyst-based photocatalysts. The techniques for enhancing the compatibility of metals and nonmetals is discussed in order to boost photoactivity within visible light irradiation. In particular, further deliberation has been carried out on the development of heterojunctions, such as type I, type II, and type III, along with Z-systems, and S-scheme systems. It is important to thoroughly investigate these issues in the sense of visible light irradiations to enhance the efficacy of photocatalytic action. In fact, another advancement in this area may include hiring mediators including grapheme oxide and metals to establish indirect Z-scheme montages with a correct band adjustment. The potential consideration of reaction chemology, mass transfer, kinetics of reactions, restriction of light diffusion, and the process and selection of suitable light and photoreactor also will optimize sustainable hydrogen output efficiency and selectivity.

Photocatalytic Microbial Fuel Cells and Performance Applications: A Review

In recent years, photocatalytic microbial fuel cells have gradually become a hot research topic in pollutant treatment, using either in situ or indirectly the oxidation of organic pollutants by catalytic materials under light and the biodegradation and mineralization of various components in wastewater by microorganisms, or through the generation of electricity by the microbial fuel cell (MFC) system to promote the photogeneration and separation of electrons and holes by the catalytic materials of the photocatalytic cell (PC) system. This study aims to provide new ideas for the development of environmentally friendly wastewater treatment technologies by investigating the use of photocatalytic cells for the efficient degradation and resource utilization of target pollutants. This study aims to raise awareness of the use of photocatalytic microbial fuel cells for pollutant degradation by providing an overview of the practical status of photocatalytic microbial fuel cells. This is achieved by reviewing the key cathode development, production capacity, and progress in the degradation of pollutants in photocatalytic microbial fuel cells. The issues facing future developments are also discussed in terms of how photocatalytic microbial fuel cells work and how they degrade pollutants. This study shows that photocatalytic microbial fuel cells are beneficial for achieving renewable energy (bioenergy, photovoltaic, etc.) capacity and dealing with environmental pollution and that this is a novel technology that deserves to be promoted to achieve the current dual carbon targets.

Fluorinated β-diketonate complexes M(tfac)2(TMEDA) (M = Fe, Ni, Cu, Zn) as precursors for the MOCVD growth of metal and metal oxide thin films

Novel trifluoroacetylacetonate complexes M(tfac)2·TMEDA (M = Fe, Ni, Cu, Zn) were used as precursors for the MOCVD growth of metal and metal oxide thin films.

Enhanced photoelectrochemical properties of nanocrystalline TiO2 electrode by surface sensitization with CuxO quantum dots

Nanoporous anatase TiO2 films were fabricated by a screen-printing method, and CuxO quantum dots (QDs) were deposited on the TiO2 films through successive ionic layer adsorption and reaction (SILAR). The amount of CuxO QDs on the TiO2 films are controlled by changing the number of SILAR cycles. The morphology, microstructure, optical, and photoelectrochemical properties of different CuxO sensitized TiO2 films (CuxO/TiO2) were investigated in detail. The nanoporous TiO2 film offers a large surface area for anchoring QDs. QD deposited samples exhibited a significant improvement in photoelectrochemical performance than the bare of TiO2. CuxO/TiO2, prepared with 7 SILAR cycles, showed the best photoelectrochemical properties, where the photocurrent density was enhanced to 500.01 μA/cm2 compared with 168.88 μA/cm2 of bare TiO2 under visible light. These results indicate that the designed CuxO/TiO2 structure possesses superior charge separation efficiency and photoelectrochemical properties.

Designing CuOx Nanoparticle-Decorated CeO2 Nanocubes for Catalytic Soot Oxidation: Role of the Nanointerface in the Catalytic Performance of Heterostructured Nanomaterials

This work investigates the structure-activity properties of CuOx-decorated CeO2 nanocubes with a meticulous scrutiny on the role of the CuOx/CeO2 nanointerface in the catalytic oxidation of diesel soot, a critical environmental problem all over the world. For this, a systematic characterization of the materials has been undertaken using transmission electron microscopy (TEM), transmission electron microscopy-energy-dispersive X-ray spectroscopy (TEM-EDS), high-angle annular dark-field-scanning transmission electron microscopy (HAADF-STEM), scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS), X-ray diffraction (XRD), Raman, N2 adsorption-desorption, and X-ray photoelectron spectroscopy (XPS) techniques. The TEM images show the formation of nanosized CeO2 cubes (∼25 nm) and CuOx nanoparticles (∼8.5 nm). The TEM-EDS elemental mapping images reveal the uniform decoration of CuOx nanoparticles on CeO2 nanocubes. The XPS and Raman studies show that the decoration of CuOx on CeO2 nanocubes leads to improved structural defects, such as higher concentrations of Ce(3+) ions and abundant oxygen vacancies. It was found that CuOx-decorated CeO2 nanocubes efficiently catalyze soot oxidation at a much lower temperature (T50 = 646 K, temperature at which 50% soot conversion is achieved) compared to that of pristine CeO2 nanocubes (T50 = 725 K) under tight contact conditions. Similarly, a huge 91 K difference in the T50 values of CuOx/CeO2 (T50 = 744 K) and pristine CeO2 (T50 = 835 K) was found in the loose-contact soot oxidation studies. The superior catalytic performance of CuOx-decorated CeO2 nanocubes is mainly attributed to the improved redox efficiency of CeO2 at the nanointerface sites of CuOx-CeO2, as evidenced by Ce M5,4 EELS analysis, supported by XRD, Raman, and XPS studies, a clear proof for the role of nanointerfaces in the performance of heterostructured nanocatalysts.

Advances in photocatalytic NOx abatement through the use of Fe2O3/TiO2 nanocomposites

Supported Fe₂O₃/TiO₂ nanocomposites were prepared for the first time by a plasma-assisted route and successfully tested in photocatalytic NO_x abatement driven by solar illumination.

Synergistic interactions of Cu and N on surface altered amorphous TiO2 nanoparticles for enhanced photocatalytic oxidative desulfurization of dibenzothiophene

Amorphous TiO₂ (AT) nanoparticles were prepared by a simple sol–gel method and subsequent incorporation with 5–20 wt% copper via an electrochemical method in the presence of tetraethylammonium perchlorate gave an active CuO/TiO₂ (CAT) photocatalyst.

Controllable fabrication of nanostructured copper compound on a Cu substrate by a one-step route

Self-assembled nanostructured copper compound whose absorption edge covers the entire visible spectrum was explored amply and processes excellent photocatalytic activity.

Decoration of size-tunable CuO nanodots on TiO2 nanocrystals for noble metal-free photocatalytic H2 production

We report a simple yet effective approach for the decoration of the TiO2 nanocrystal surface with size-tunable CuO nanodots for high-performance noble metal-free photocatalytic H2 production. Modification with polyacrylic acid enables the surface of TiO2 nanocrystals to be selectively deposited with Cu(OH)2 nanodots, which can be subsequently converted to CuO through dehydration without changing their morphologies. UV irradiation of the nanocomposite solution in the presence of a hole scavenger produces photogenerated electrons which reduce CuO to metallic Cu nanodots, making them effective co-catalysts in a role similar to Pt for promoting photocatalytic H2 production. Due to the considerably high work function of Cu, the formation of a metal-semiconductor Schottky junction induces efficient charge separation and transfer. As a result, the TiO2 nanocrystals decorated with an optimal amount of CuO nanodots (1.7 wt%) could reach ∼50% of the photocatalytic activity achievable by the Pt-TiO2 counterparts (1 wt%), clearly demonstrating the great potential of such composite catalysts for efficient noble metal-free photocatalytic H2 production.

Photocatalysts with internal electric fields

The photocatalytic activity of materials for water splitting is limited by the recombination of photogenerated electron-hole pairs as well as the back-reaction of intermediate species. This review concentrates on the use of electric fields within catalyst particles to mitigate the effects of recombination and back-reaction and to increase photochemical reactivity. Internal electric fields in photocatalysts can arise from ferroelectric phenomena, p-n junctions, polar surface terminations, and polymorph junctions. The manipulation of internal fields through the creation of charged interfaces in hierarchically structured materials is a promising strategy for the design of improved photocatalysts.

Sol–gel deposited Cu2O and CuO thin films for photocatalytic water splitting

Cu₂O and CuO thin films deposited by a sol–gel spin-coating process show promise for photocatalytic water splitting.

CuO/Cu2O composite hollow polyhedrons fabricated from metal-organic framework templates for lithium-ion battery anodes with a long cycling life

Novel CuO/Cu2O hollow polyhedrons with porous shells were fabricated by thermal decomposition of coordination compound [Cu3(btc)2]n (btc = benzene-1,3,5-tricarboxylate) polyhedrons at 350 °C. When tested as anode materials for lithium-ion batteries, these hollow polyhedrons exhibited a reversible lithium storage capacity as high as 740 mA h g(-1) at 100 mA g(-1) after 250 cycles even if the charge-discharge process is stopped for one week during the test time.

On the performances of CuxO-TiO2 (x = 1, 2) nanomaterials as innovative anodes for thin film lithium batteries

CuxO-TiO2 (x = 1, 2) nanomaterials are synthesized on polycrystalline Ti substrates by a convenient chemical vapor deposition (CVD) approach, based on the initial growth of a CuxO matrix (at 400 and 550 °C for x = 1 and 2, respectively) and the subsequent overdispersion of TiO2 at 400 °C. All CVD processes are carried out in an oxygen atmosphere saturated with water vapor. The obtained systems are investigated by means of glancing incidence X-ray diffraction (GIXRD), X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), field emission-scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), and electrochemical experiments. Galvanostatic charge/discharge measurements indicate that Cu2O-TiO2 nanomaterials exhibit very attractive high-rate capabilities (∼400 mA h g(-1) at 1 C; ∼325 mA h g(-1) at 2 C) and good stability after 50 operating cycles, with a retention of 80% of the initial capacity. This phenomenon is mainly due to the presence of TiO2 acting as a buffer material, i.e., minimizing volume changes occurring in the electrochemical conversion. In a different way, CuO-TiO2 systems exhibit worse electrochemical performances as a consequence of their porous morphology and higher thickness. In both cases, the obtained values are among the best ever reported for CuxO-based systems, candidating the present nanomaterials as extremely promising anodes for eventual applications in thin film lithium batteries.

Hybrid Cu(x)O/TiO₂ nanocomposites as risk-reduction materials in indoor environments

Photocatalytic TiO(2) powders impart ultraviolet light-induced self-cleaning and antibacterial functions when coated on outdoor building materials. For indoor applications, however, TiO(2) must be modified for visible-light and dark sensitivity. Here we report that the grafting of nanometer-sized Cu(x)O clusters onto TiO(2) generates an excellent risk-reduction material in indoor environments. X-ray absorption near-edge structure using synchrotron radiation and high-resolution transmission electron microscopic analyses revealed that Cu(x)O clusters were composed of Cu(I) and Cu(II) valence states. The Cu(II) species in the Cu(x)O clusters endow TiO(2) with efficient visible-light photooxidation of volatile organic compounds, whereas the Cu(I) species impart antimicrobial properties under dark conditions. By controlling the balance between Cu(I) and Cu(II) in Cu(x)O, efficient decomposition and antipathogenic activity were achieved in the hybrid Cu(x)O/TiO(2) nanocomposites.