Ethanol-assisted graphene oxide-based thin film formation at pentane-water interface

Equipment-Free Fabrication of Thiolated Reduced Graphene Oxide Langmuir-Blodgett Films: A Novel Approach for Versatile Surface Engineering

This research presents a novel method for the fabrication of mercapto reduced graphene oxide (m-RGO) Langmuir-Blodgett (LB) films without the need for specialized equipment. The conventional LB technique offers precise control over the deposition of thin films onto solid substrates, but its reliance on sophisticated instrumentation limits its accessibility. In this study, we demonstrate a simplified approach that circumvents the necessity for such equipment, thereby democratizing the production of m-RGO LB films. Thiolation of reduced graphene oxide (rGO) imparts enhanced stability and functionality to the resulting films, rendering them suitable for a wide range of applications in surface engineering, sensing, and catalysis. The fabricated m-RGO LB films exhibit favorable morphological, structural, and surface properties, as characterized by various analytical techniques including scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR). Furthermore, the performance of the m-RGO LB films is evaluated in terms of their surface wettability, electrochemical behavior, and chemical reactivity. The equipment-free fabrication approach presented herein offers a cost-effective and scalable route for the production of functionalized graphene-based thin films, thus broadening the scope for their utilization in diverse technological applications.

Graphene-Based Transparent Flexible Strain Gauges with Tunable Sensitivity and Strain Range

Monolayers of graphene oxide, assembled into densely packed sheets at an immiscible hexane/water interface, form transparent conducting films on polydimethylsiloxane membranes after reduction in hydroiodic acid (HI) vapor to reduced graphene oxide (rGO). Prestraining and relaxing the membranes introduces cracks in the rGO film. Subsequent straining opens these cracks and induces piezoresistivity, enabling their application as transparent strain gauges. The sensitivity and strain range of these gauges is controlled by the cracked film structure that is determined by the reducing conditions used in manufacture. Reduction for 30 s in HI vapor leads to an array of parallel cracks that do not individually span the membrane. These cracks do not extend on subsequent straining, leading to a gauge with a usable strain range >0.2 and gauge factor (GF) at low strains ranging from 20 to 100, depending on the prestrain applied. The GF reduces with increasing applied strain and asymptotes to about 3, for all prestrains. Reduction for 60 s leads to cracks spanning the entire membrane and an increased film resistance but a highly sensitive strain gauge, with GF ranging from 800 to 16,000. However, the usable strain range reduces to <0.01. A simple equivalent resistor model is proposed to describe the behavior of both gauge types. The gauges show a repeatable and stable response with loading frequencies >1 kHz and have been used to detect human body strains in a simple e-skin demonstration.

One-Stage Process of Reduction, Fluorination, and Doping with Nitrogen of Graphene Oxide Films

The possibility of chemical modification of a graphene oxide film deposited on a Si/SiO2 substrate during a one-stage hydrothermal process in the presence of fluorine ions and reducing agents, such as ascorbic acid or hydrazine, is shown. The proposed technique makes it possible to obtain reduced fluorinated graphene nitride oxide (RGOFN) in the form of a thin film with a controlled composition of functional groups by changing the type and concentration of the reducing agent and then transferring the obtained films to any substrate. XPS and IR spectroscopy of the obtained films revealed controlled changes in the structure and composition of graphene oxide associated with the removal of oxygen groups and the incorporation of fluorine ions as well as the reduction of conjugated double bonds and the controlled incorporation of nitrogen into thin RGOFN films. The current-voltage characteristics of the fabricated RGOFN structures showed that their electrical properties are well controlled by doping with nitrogen during the proposed one-stage process.

One-Step Interfacial Integration of Graphene Oxide and Organic Chromophores into Multicomponent Nanohybrids with Photoelectric Properties

A one-step protocol for interfacial self-assembly of graphene oxide (GO), glutamine-substituted perylene diimide (PDI-glu), 10,12-pentacosadiynoic acid (PCDA), and zinc acetate into three- and four-component hybrid nanofilms through hydrogen and coordination bonding was developed. The hybrids deposited onto solid supports were studied after polymerization of PCDA by UV-vis absorption, fluorescence, and Raman spectroscopies, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The results of spectroscopic studies suggest that the hybrids assembled through H-bonds can maintain the light-induced Förster energy transfer from the PDI-glu chromophore to the conjugated polymer and then to GO leading to fluorescence quenching. In the hybrids assembled through coordination bonding with zinc clusters, the energy transfer proceeds from PDI-glu to the PDA polymer, whereas the transfer from PDA to GO is quenched completely. Another important characteristic of these ultrathin hybrids is their stability with respect to photobleaching of chromophores due to the acceptor properties of GO. The as-assembled hybrid nanofilms were integrated with conventional photovoltaic planar architectures to study their photoelectric properties. The zinc-containing hybrids integrated with a hole transport layer exhibited photovoltaic properties. The cell with the integrated four-component hybrid comprising both PDI-glu and PDA showed a photocurrent/dark current ratio almost an order higher than that of the three-component hybrid assembled with PDA only. The supramolecular method based on the interfacial self-assembly can be extended to a wide variety of organic chromophores and polymerizable surfactants for integrating them into multicomponent functional GO-based nanohybrids with targeted properties for organic electronics.

High-performance and wearable hazardous gases sensor based on n-n heterojunction film of NGO and tetrakis(1-pyrenyl)porphyrin

The popularity of "Internet of Things" and portable electronic devices creates unprecedented demands for wearable gas sensors with excellent performance. In this study, the flexible n-n heterojunction film is firstly produced from metalloporphyrin complex 5,10,15,20-tetrakis(1-pyrenyl) porphyrin cobalt (II) (CoTPyrP) and nitrogen-doped graphene oxide (NGO) film, using solution-processing quasi-Langmuir-Shäfer (QLS) method and employed as the electrochemical identification layer for the wearable sensor. Thanks to the attractive electron-transfer properties from porphyrin to NGO, and the local regulation of electron transport by N and C atoms with different electronegativity on NGO, the resulting sensor shows good responses to NO₂, SO₂, NH₃, H₂S gases with the low detection limit (LOD) of 6, 74, 113 and 178 ppb, respectively. The uniform and compact structure of the heterojunction films provide excellent mechanical flexibility and suppress the penetration of gases into the film to obtain fast recovery speed. In addition, a sensor array consisting of NGO/CoTPyrP heterojunction and CoTPyrP film sensor is established, achieving selective identification of four hazardous gases. The present work provides potential application for hazardous gases identification in actual systems, and proposes an effective method to develop new flexible n-n heterojunctions for wearable gas sensors.

Low Surface Roughness Graphene Oxide Film Reduced with Aluminum Film Deposited by Magnetron Sputtering

Graphene film has wide applications in optoelectronic and photovoltaic devices. A novel and facile method was reported for the reduction of graphene oxide (GO) film by electron transfer and nascent hydrogen produced between aluminum (Al) film deposited by magnetron sputtering and hydrochloric acid (HCl) solution for only 5 min, significantly shorter than by other chemical reduction methods. The thickness of Al film was controlled utilizing a metal detection sensor. The effect of the thickness of Al film and the concentration of HCl solution during the reduction was explored. The optimal thickness of Al film was obtained by UV-Vis spectroscopy and electrical conductivity measurement of reduced GO film. Atomic force microscope images could show the continuous film clearly, which resulted from the overlap of GO flakes, the film had a relatively flat surface morphology, and the surface roughness reduced from 7.68 to 3.13 nm after the Al reduction. The film sheet resistance can be obviously reduced, and it reached 9.38 kΩ/sq with a high transmittance of 80% (at 550 nm). The mechanism of the GO film reduction by electron transfer and nascent hydrogen during the procedure was also proposed and analyzed.

Molecular Insight into the Adsorption Thermodynamics and Interfacial Behavior of GOs at the Liquid-Liquid Interface

The adsorption of two-dimensional (2-D) graphene oxide (GO) nanosheets at liquid-liquid interfaces has broad technological implications from functional material preparations to oil-water emulsification. Molecular-level understanding of the adsorption thermodynamics and the interfacial behavior is of great significance. Here, the adsorption free energy of GO nanosheets at the water-cyclohexane system was simulated, in which the effect of oxygen-containing groups and deprotonation has been investigated. It was observed that the neutral GO (GO-COOH) has obvious interfacial activity with a reduction of interfacial tension, while the deprotonated GO (GO-COO^-) shows a weak interface affinity. There exists an optimal oxidization degree that could cause the best interfacial stability, which is attributed to the balance of interfacial hydrophilic-hydrophobic interactions. The interaction arising from water is the main factor determining interfacial activity. The interfacial morphology and dynamics of GO nanosheets have also been simulated, in which an anisotropic 2-D translation and rotation along the interface were revealed. Our simulation results provide new insight into the adsorption mechanism and dynamics behavior of GO at the oil-water interface.

Swelling properties of graphite oxides and graphene oxide multilayered materials

Graphite oxide (GtO) and graphene oxide (GO) multilayered laminates are hydrophilic materials easily intercalated by water and other polar solvents. By definition, an increase in the volume of a material connected to the uptake of a liquid or vapour is named swelling. Swelling is a property which defines graphite oxides and graphene oxides. Less oxidized materials not capable of swelling should be named oxidized graphene. The infinite swelling of graphite oxide yields graphene oxide in aqueous dispersions. Graphene oxide sheets dispersed in a polar solvent can be re-assembled into multilayered structures and named depending on applications as films, papers or membranes. The multilayered GO materials exhibit swelling properties which are mostly similar to those of graphite oxides but not identical and in some cases surprisingly different. Swelling is a key property of GO materials in all applications which involve the sorption of water/solvents from vapours, immersion of GO into liquid water/solvents and solution based chemical reactions. These applications include sensors, sorption/removal of pollutants from waste waters, separation of liquid and gas mixtures, nanofiltration, water desalination, water-permeable protective coatings, etc. Swelling defines the distance between graphene oxide sheets in solution-immersed GO materials and the possibility for penetration of ions and molecules inside of interlayers. A high sorption capacity of GO towards many molecules and cations is defined by swelling which makes the very high surface area of GO accessible. GtO and GO swelling is a surprisingly complex phenomenon which is manifested in a variety of different ways. Swelling is strongly different for materials produced using the most common Brodie and Hummers oxidation procedures; it depends on the degree of oxidation, ad temperature and pressure conditions. The value of the GO interlayer distance is especially important in membrane applications. Diffusion of solvent molecules and ions is defined by the size of "permeation channels" provided by the swelled GO structure. According to extensive studies performed over the last decade the exact value of the inter-layer distance in swelled GO depends on the nature of solvent, temperature and pressure conditions, and the pH and concentration of solutions and exhibits pronounced aging effects. This review provides insight into the fundamental swelling properties of multilayered GO and demonstrates links to advanced applications of these materials.

Electrochemical investigation of adsorption of graphene oxide at an interface between two immiscible electrolyte solutions

Graphene oxide (GO) has been recognized as an amphiphilic molecule or a soft colloidal particle with the ability to adsorb and assemble at the liquid/liquid (L/L) interface. However, most extant works concerning the adsorption behaviors of GO at the L/L interface have been limited to the non-polarized L/L interface. Here, we studied what would happen if GO nanosheets met with a polarizable L/L interface, namely an interface between two immiscible electrolyte solutions (ITIES). On one hand, the adsorption behavior of GO nanosheets at the L/L interface was electrochemically investigated firstly by using cyclic voltammetry (CV) and alternating current voltammetry (ACV). On the other hand, the influence of the adsorbed GO layers at the L/L interface on the ion transfer reactions was studied by employing ion-transfer voltammetry of TEA⁺ and ClO₄⁻ selected as probe ions. Capacitance measurements show that the interfacial capacitance increases greatly in the presence of GO nanosheets inside the aqueous phase, which can be attributed to the increases of interfacial corrugation and charge density induced by the parallel adsorption and assembly of GO at the L/L interface. In addition, it is found that the application of an interfacial potential difference by external polarization can promote the adsorption of GO at the L/L interface. Moreover, the ion-transfer voltammetric results further demonstrate that the GO layers formed at the interface can suppress the ion transfer reactions due to interfacial blocking and charge screening, as well as the hindrance effect induced by the GO layers. All the results with insights into the interfacial behavior of GO under polarization with an external electric field enable understanding the adsorption behavior of GO at the L/L interface more comprehensively.

The adsorption behavior of graphene oxide (GO) nanosheets at an interface between two immiscible electrolyte solutions (ITIES) was electrochemically investigated firstly by using cyclic voltammetry (CV) and alternating current voltammetry (ACV).

Room-Temperature Production of Nanocrystalline Molybdenum Disulfide (MoS2) at the Liquid-Liquid Interface

Scalable synthesis of 2D materials is a prerequisite for their commercial exploitation. Here, a novel method of producing nanocrystalline molybdenum disulfide (MoS₂) at the liquid-liquid interface is demonstrated by decomposing a molecular precursor (tetrakis(N,N-diethyldithiocarbamato) molybdenum(IV)) in an organic solvent. The decomposition occurs over a few hours at room temperature without stirring or the addition of any surfactants, producing MoS₂ which can be isolated onto substrates of choice. The formation of MoS₂ at the liquid-liquid interface can be accelerated by the inclusion of hydroxide ions in the aqueous phase, which we propose to act as a catalyst. The precursor concentration was varied to minimize MoS₂ thickness, and the organic solvent was chosen to optimize the speed and quality of formation. The kinetics of the MoS₂ formation has been investigated, and a reaction mechanism has been proposed. The synthesis method is, to the best of our knowledge, the first reported room-temperature synthesis of transition-metal dichalcogenides, offering a potential solution to scalable 2D material production.

Elucidating the amphiphilic character of graphene oxide

The amphiphilic character of graphene oxide was analysed in terms of its interfacial activities, using atomistic molecular dynamics. Graphene oxides at four different degrees of oxygenation were investigated considering both the effects of oxidation and carboxyl edge-functionalization. Solvation free energies are strongly negative and of increasing magnitude with the concentration for all systems, even in the toluene phase, indicating that GO presents a favourable solvation in both pure liquids as well as interfaces. The PMF results indicate that only the R20 system is slightly active at the water/vacuum interface, with a PMF minimum of about -2.6 kJ mol-1. Both analyses, free energy and PMF, indicate that all systems with higher oxygen concentrations have lower free energy in water than in toluene, while the R20 system opposes this tendency. Comparison between the reduced GOs (20%) shows that edge-functionalised systems were more active than basal-functionalized systems, indicating that oxygen concentration plays a more relevant role than the distribution of functional groups.

Self-Assembled Graphene-Based Architectures and Their Applications

Due to unique planar structures and remarkable thermal, electronic, and mechanical properties, chemically modified graphenes (CMGs) such as graphene oxides, reduced graphene oxides, and the related derivatives are recognized as the attractive building blocks for "bottom-up" nanotechnology, while self-assembly of CMGs has emerged as one of the most promising approaches to construct advanced functional materials/systems based on graphene. By virtue of a variety of noncovalent forces like hydrogen bonding, van der Waals interaction, metal-to-ligand bonds, electrostatic attraction, hydrophobic-hydrophilic interactions, and π-π interactions, the CMGs bearing various functional groups are highly desirable for the assemblies with themselves and a variety of organic and/or inorganic species which can yield various hierarchical nanostructures and macroscopic composites endowed with unique structures, properties, and functions for widespread technological applications such as electronics, optoelectronics, electrocatalysis/photocatalysis, environment, and energy storage and conversion. In this review, significant recent advances concerning the self-assembly of CMGs are summarized, and the broad applications of self-assembled graphene-based materials as well as some future opportunities and challenges in this vibrant area are elucidated.

Ultrafast Molecular Stitching of Graphene Films at the Ethanol/Water Interface for High Volumetric Capacitance

Compact graphene film electrodes with a high ion-accessible surface area have the promising potential to realize high-density electrochemical energy storage (or high volumetric capacitance), which is vital for the development of flexible, portable, and wearable energy storage devices. Here, a novel, ultrafast strategy for stitching graphene sheets into films, in which p-phenylenediamine (PPD) molecules are uniformly intercalated between the graphene sheets, is simply constructed at the ethanol/water interface. Due to uniformly interlayer spacing (∼1.1 nm), good wettability, and an interconnected ion transport channel, the binder-free PPD-graphene film with a high packing density (1.55 g cm^-3) delivers an ultrahigh volumetric capacitance (711 F cm^-3 at a current density of 0.5 A g^-1), high rate performance, high power and energy densities, and excellent cycling stability in aqueous electrolytes. This interfacial stitching strategy holds new promise for the future design of enhanced electrochemical energy-storage devices.

Antibacterial Activities of Graphene Oxide-Molybdenum Disulfide Nanocomposite Films

Two-dimensional (2D) nanomaterials, such as graphene-based materials and transition metal dichalcogenide (TMD) nanosheets, are promising materials for biomedical applications owing to their remarkable cytocompatibility and physicochemical properties. On the basis of their potent antibacterial properties, 2D materials have potential as antibacterial films, wherein the 2D nanosheets are immobilized on the surface and the bacteria may contact with the basal planes of 2D nanosheets dominantly rather than contact with the sharp edges of nanosheets. To address these points, in this study, we prepared an effective antibacterial surface consisting of representative 2D materials, i.e., graphene oxide (GO) and molybdenum disulfide (MoS₂), formed into nanosheets on a transparent substrate for real device applications. The antimicrobial properties of the GO-MoS₂ nanocomposite surface toward the Gram-negative bacteria Escherichia coli were investigated, and the GO-MoS₂ nanocomposite exhibited enhanced antimicrobial effects with increased glutathione oxidation capacity and partial conductivity. Furthermore, direct imaging of continuous morphological destruction in the individual bacterial cells having contacts with the GO-MoS₂ nanocomposite surface was characterized by holotomographic (HT) microscopy, which could be used to detect the refractive index (RI) distribution of each voxel in bacterial cell and reconstruct the three-dimensional (3D) mapping images of bacteria. In this regard, the decreases in both the volume (67.2%) and the dry mass (78.8%) of bacterial cells that came in contact with the surface for 80 min were quantitatively measured, and releasing of intracellular components mediated by membrane and oxidative stress was observed. Our findings provided new insights into the antibacterial properties of 2D nanocomposite film with label-free tracing of bacterial cell which improve our understanding of antimicrobial activities and opened a window for the 2D nanocomposite as a practical antibacterial film in biomedical applications.

Nitrogen-doped graphene oxide for effectively removing boron ions from seawater

Elemental boron exists in the form of boric acid or borate salts in aqueous solution. The human body is very sensitive to the amount of boron, and boron contamination in drinking water affects our health adversely. However, boron is not easily removed due to its small ionic size and is a problem to water treatment systems. Herein, we report a new method to remove boron using nitrogen-doped graphene oxide (N-GO). The maximum adsorption capacity we have obtained is 58.7 mg g^-1 and this makes N-GO one of the best materials to adsorb boron. Real seawater with 5 mg L^-1 as boron is used as a feed for testing and the absorption capacity is shown to be up to 2.42 mg g^-1. This high adsorption capacity is mainly attributed to the large amount of hydroxyl groups distributed across the high surface area of graphene oxide and the enhanced adsorption that results from nitrogen-doped sites. Once N-GO is saturated with boron ions, it can be easily regenerated via acid treatment. Our proposed technique has high commercial value and we believe that it is very valuable to the water treatment industry.

Human-Like Sensing and Reflexes of Graphene-Based Films

Humans have numerous senses, wherein vision, hearing, smell, taste, and touch are considered as the five conventionally acknowledged senses. Triggered by light, sound, or other physical stimulations, the sensory organs of human body are excited, leading to the transformation of the afferent energy into neural activity. Also converting other signals into electronical signals, graphene-based film shows its inherent advantages in responding to the tiny stimulations. In this review, the human-like senses and reflexes of graphene-based films are presented. The review starts with the brief discussions about the preparation and optimization of graphene-based film, as where as its new progress in synthesis method, transfer operation, film-formation technologies and optimization techniques. Various human-like senses of graphene-based film and their recent advancements are then summarized, including light-sensitive devices, acoustic devices, gas sensors, biomolecules and wearable devices. Similar to the reflex action of humans, graphene-based film also exhibits reflex when under thermal radiation and light actuation. Finally, the current challenges associated with human-like applications are discussed to help guide the future research on graphene films. At last, the future opportunities lie in the new applicable human-like senses and the integration of multiple senses that can raise a revolution in bionic devices.

Rapid self-assembly of ultrathin graphene oxide film and application to silver nanowire flexible transparent electrodes

A self-assembled ultrathin graphene oxide film was rapidly prepared within only 3 minutes to improve silver nanowire electrode performance.

Synthesis and applications of large-area single-layer graphene

The progresses in syntheses of large-area single-layer graphene and applications in membrane separation are summarized in this review.

A sedimentation study of graphene oxide in aqueous solution using gradient differential centrifugation

This work involved the study of sedimentation of graphene oxide (GO) in aqueous solution by gradient differential centrifugation.

A biosensor based on Coriolopsis gallica laccase immobilized on nitrogen-doped multiwalled carbon nanotubes and graphene oxide for polyphenol detection

The use of nanomaterials allows the design of ultrasensitive biosensors with advantages in the detection of organic molecules. Catechol and catechin are molecules that occur naturally in fruits, and their presence in products like dyes and wines affects quality standards. In this study, catechol and catechin were measured at the nanoscale by means of cyclic voltammetry. The oxidation of Coriolopsis gallica laccase immobilized on nitrogen-doped multiwalled carbon nanotubes (Lac/CN x -MWCNT) and on graphene oxide (Lac/GO) was used to measure the concentrations of catechol and catechin. Nitrogen-doped multiwalled carbon nanotubes (CN x -MWCNT) were synthesized by spray pyrolysis and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and x-ray photoelectron spectroscopy (XPS). Covalently bonded hybrids with laccase (Lac/CN x -MWCNT and Lac/GO) were generated. Catalytic activity of free enzymes determined with syringaldazine yielded 14 584 UmL-1. With Lac/CN x -MWCNT at concentrations of 6.4 mmol L-1 activity was 9326 U mL-1, while enzyme activity measured with Lac/GO at concentration of 6.4 mmol L-1 was 9 234 U mL-1. The Lac/CN x -MWCNT hybrid showed higher stability than Lac/GO at different ethyl alcohol concentrations. The Lac/CN x -MWCNT hybrid can measure concentrations, not previously reported, as low as 1 × 10-8 mol L-1 by measuring the electric current responses.

Evaporation induced wrinkling of graphene oxide at the nanoparticle interface

With the thickness of only a single atomic layer, graphene displays many interesting surface properties. A general observation is that wrinkles are formed on graphene oxide (GO) when it is dried in the presence of adsorbed inorganic nanoparticles. In this case, evaporation induced wrinkling is not an elastic deformation but is permanent. Understanding the nanoscale force of wrinkle formation is important for device fabrication and sensing. Herein, we employ surface functionalized gold nanoparticles (AuNPs) as a model system. All tested AuNPs induced wrinkling, including those capped by DNA, polymers and proteins. The size of AuNPs is less important compared to the properties of solvent. Wrinkle formation is attributed to drying related capillary force acting on the GO surface, and a quantitative equation is derived. After drying, the adsorption affinity between GO and AuNPs is increased due to the increased contact area.

Self-assembly of a thin highly reduced graphene oxide film and its high electrocatalytic activity

A thin highly reduced graphene oxide (rGO) film was self-assembled at the dimethyl formamide (DMF)-air interface through evaporation-induced water-assisted thin film formation at the pentane-DMF interface, followed by complete evaporation of pentane. The thin film was transferred onto various solid substrates for film characterization and electrochemical sensing. UV-visible spectrometry, scanning electron microscopy (SEM), atomic force microscopy (AFM) and electrochemistry techniques were used to characterize the film. An rGO film showing 82.8% of the transmittance at 550 nm corresponds to a few layers of rGO nanosheets. The rGO nanosheets cross-stack with each other, lying approximately in the plane of the film. An rGO film collected on a glassy carbon (GC) electrode exhibited improved electrical conductivity compared to GC, with the electrode charge-transfer resistance (Rct) reduced from 31 Ω to 22 Ω. The as-formed rGO/GC electrode was mechanically very stable, exhibiting significantly enhanced electrocatalytic activity to H(2)O(2) and dopamine. Multiple layers of the rGO films on the GC electrode showed even stronger electrocatalytic activity to dopamine than that of the single rGO film layer. The controllable formation of a stable rGO film on various solid substrates has potential applications for nanoelectronics and sensors/biosensors.

Self-assembly of graphene oxide at interfaces

Due to its amphiphilic property, graphene oxide (GO) can achieve a variety of nanostructures with different morphologies (for example membranes, hydrogel, crumpled particles, hollow spheres, sack-cargo particles, Pickering emulsions, and so on) by self-assembly. The self-assembly is mostly derived from the self-concentration of GO sheets at various interfaces, including liquid-air, liquid-liquid and liquid-solid interfaces. This paper gives a comprehensive review of these assembly phenomena of GO at the three types of interfaces, the derived interfacial self-assembly techniques, and the as-obtained assembled materials and their properties. The interfacial self-assembly of GO, enabled by its fantastic features including the amphiphilicity, the negatively charged nature, abundant oxygen-containing groups and two-dimensional flexibility, is highlighted as an easy and well-controlled strategy for the design and preparation of functionalized carbon materials, and the use of self-assembly for uniform hybridization is addressed for preparing hybrid carbon materials with various functions. A number of new exciting and potential applications are also presented for the assembled GO-based materials. This contribution concludes with some personal perspectives on future challenges before interfacial self-assembly may become a major strategy for the application-targeted design and preparation of functionalized carbon materials.

Morphology control of surfactant-assisted graphene oxide films at the liquid-gas interface

Control of a two-dimensional (2D) structure of assembled graphene oxide (GO) sheets is highly desirable for fundamental research and potential applications of graphene devices. We show that an alkylamine surfactant, i.e., octadecylamine (ODA), Langmuir monolayer can be utilized as a template for adsorbing highly hydrophilic GO sheets in an aqueous subphase at the liquid-gas interface. The densely packed 2-D monolayer of such complex films was obtained on arbitrary substrates by applying Langmuir-Schaefer or Langmuir-Blodgett technique. Morphology control of GO sheets was also achieved upon compression by tuning the amount of spread ODA molecules. We found that ODA surfactant monolayers prevent GO sheets from sliding, resulting in formation of wrinkling rather than overlapping at the liquid-gas interface during the compression. The morphology structures did not change after a graphitization procedure of chemical hydrazine reduction and thermal annealing treatments. Since morphologies of graphene films are closely correlated to the performance of graphene-based materials, the technique employed in this study can provide a route for applications requiring wrinkled graphenes, ranging from nanoelectronic devices to energy storage materials, such as supercapacitors and fuel cell electrodes.

A new oil/water interfacial assembly of sulphonated graphene into ultrathin films

A new oil/water interfacial assembly has been developed to fabricate graphene films by cooperation of two established interfacial assembling techniques.

Lateral dimension-dependent antibacterial activity of graphene oxide sheets

Graphene oxide (GO) is a promising precursor to produce graphene-family nanomaterials for various applications. Their potential health and environmental impacts need a good understanding of their cellular interactions. Many factors may influence their biological interactions with cells, and the lateral dimension of GO sheets is one of the most relevant material properties. In this study, a model bacterium, Escherichia coli ( E. coli ), was used to evaluate the antibacterial activity of well-dispersed GO sheets, whose lateral size differs by more than 100 times. Our results show that the antibacterial activity of GO sheets toward E. coli cells is lateral size dependent. Larger GO sheets show stronger antibacterial activity than do smaller ones, and they have different time- and concentration-dependent antibacterial activities. Large GO sheets lead to most cell loss after 1 h incubation, and their concentration strongly influences antibacterial activity at relative low concentration (<10 μg/mL). In contrast, when incubating with small GO sheets up to 4 h, the inactivation rate of E. coli cells continues increasing. The increase of small GO sheet concentration also results in persistent increases in their antibacterial activity. In this study, GO sheets with different lateral sizes are all well dispersed, and their oxidation capacity toward glutathione is similar, consistent with X-ray photoelectron spectroscopy and ultraviolet-visible absorption spectroscopy results. This suggests the lateral size-dependent antibacterial activity of GO sheets is caused by neither their aggregation states, nor oxidation capacity. Atomic force microscope analysis of GO sheets and cells shows that GO sheets interact strongly with cells. Large GO sheets more easily cover cells, and cells cannot proliferate once fully covered, resulting in the cell viability loss observed in the followed colony counting test. In contrast, small GO sheets adhere to the bacterial surfaces, which cannot effectively isolate cells from environment. This study highlights the importance of tailoring the lateral dimension of GO sheets to optimize the application potential with minimal risks for environmental health and safety.

Spontaneous and fast growth of large-area graphene nanofilms facilitated by oil/water interfaces

An efficient wet-chemical method based on soft interfacial self-assembly is developed for spontaneous, fast growth of large-area graphene nanofilms on various substrates. The graphene nanofilms produced show tunable optical properties and a highly reversible optoelectronic response. Complementary to chemical vapor deposition, this method could offer a fast, simple, and low-cost chemical strategy to produce graphene nanofilms.

Preparation of polymer decorated graphene oxide by γ-ray induced graft polymerization

Herein, we report a facile approach to decorate graphene oxide (GO) sheets with poly(vinyl acetate) (PVAc) by γ-ray irradiation-induced graft polymerization. The content of PVAc in the obtained sample, i.e., PVAc grafted GO (GO-g-PVAc) is calculated by the loss weight in thermogravimetric analysis (TGA) curves. A GO-g-PVAc sample with a degree of grafting (DG) of 28.5% was well dispersed in common organic solvents and the dispersions obtained were extremely stable at room temperature without any aggregation, even after standing for 2 months. The excellent dispersibility and stability of GO-g-PVAc in common organic solvents are readily rationalized in terms of the full coverage of PVAc chains and solvated layer formation on graphene oxide sheets surface, which weakens the interlaminar attraction of GO sheets. This approach presents a facile route for the preparation of dispersible GO and shows great potential in the preparation of graphene-based composites by solution-processes.