Vesicles in ionic liquids

Getting together without water: Lipid self-assembly in polar non-aqueous solvents

Self-assembled structures have numerous applications including drug delivery, solubilization, and food science. However, to date investigations into self-assembled structures have been largely limited to water, with some additives. This limits the types of assemblies that can form, as well as the accessible temperature range. Non-aqueous, polar solvents such as ionic liquids and deep eutectic solvents offer alternative self-assembly media that can overcome many of these challenges. These novel solvents can be designed to support specific types of assemblies or to remain stable under more extreme conditions. This review highlights recent advances in the field of self-assembly in polar non-aqueous solvents. Here we quantify the contribution of certain solvent properties such as nanostructure and solvent cohesion to lipid self-assembly. While this field is still relatively new, preliminary design rules are emerging, such as increasing hydrophobic regions leading to decreasing solvent cohesion, with a consequent reduction in lipid phase diversity. Ultimately, this review demonstrates the capacity for solvent control of lipid assemblies while also drawing attention to areas that need further work. With more systematic studies, solvents could be explicitly designed to achieve specific lipid assemblies for use in target applications, such as cargo delivery to particular cell types (e.g. cancerous), or triggered release under desired conditions (e.g. pH for release on wound infection).

H-bond network, interfacial tension and chain melting temperature govern phospholipid self-assembly in ionic liquids

HYPOTHESIS

The self-assembly structures and phase behaviour of phospholipids in protic ionic liquids (ILs) depend on intermolecular forces that can be controlled through changes in the size, polarity, and H-bond capacity of the solvent.

EXPERIMENTS

The structure and temperature stability of the self-assembled phases formed by four phospholipids in three ILs was determined by a combination of small- and wide-angle X-ray scattering (SAXS and WAXS) and small-angle neutron scattering (SANS). The phospholipids have identical phosphocholine head groups but different alkyl tail lengths and saturations (DOPC, POPC, DPPC and DSPC), while the ILs' amphiphilicity, H-bond network density and polarity are varied between propylammonium nitrate (PAN) to ethylammonium nitrate (EAN) to ethanolammonium nitrate (EtAN).

FINDINGS

The observed structures and phase behaviour of the lipids becomes more surfactant-like with decreasing average solvent polarity, H-bond network density and surface tension. In PAN, all the investigated phospholipids behave like surfactants in water. In EAN they exhibit anomalous phase sequences and unexpected transitions as a function of temperature, while EtAN supports structures that share characteristics with water and EAN. Structures formed are also sensitive to proximity to the lipid chain melting temperature.

Unusual phosphatidylcholine lipid phase behavior in the ionic liquid ethylammonium nitrate

HYPOTHESIS

The forces that govern lipid self-assembly ionic liquids are similar to water, but their different balance can result in unexpected behaviour.

EXPERIMENTS

The self-assembly behaviour and phase equilibria of two phospholipids, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), in the most common protic ionic liquid, ethylammonium nitrate (EAN) have been investigated as function of composition and temperature by small- and wide-angle X-ray scattering (SAXS/WAXS) and small-angle neutron scattering (SANS).

FINDINGS

Both lipids form unusual self-assembly structures and show complex and unexpected phase behaviour unlike that seen in water; DSPC undergoes a gel L_β to crystalline L_c phase transition on warming, while POPC forms worm-like micelles L₁ upon dilution. This surprising phase behaviour is attributed to the large size of the EAN ions that solvate the lipid headgroup compared to water changing amphiphile packing. Weaker H-bonding between EAN and lipid headgroups also contributes. These results provide new insight for the design of lipid based nanostructured materials in ionic liquids with atypical properties.

Current Advances in Lipid Nanosystems Intended for Topical and Transdermal Drug Delivery Applications

Skin delivery is an exciting and challenging field. It is a promising approach for effective drug delivery due to its ease of administration, ease of handling, high flexibility, controlled release, prolonged therapeutic effect, adaptability, and many other advantages. The main associated challenge, however, is low skin permeability. The skin is a healthy barrier that serves as the body's primary defence mechanism against foreign particles. New advances in skin delivery (both topical and transdermal) depend on overcoming the challenges associated with drug molecule permeation and skin irritation. These limitations can be overcome by employing new approaches such as lipid nanosystems. Due to their advantages (such as easy scaling, low cost, and remarkable stability) these systems have attracted interest from the scientific community. However, for a successful formulation, several factors including particle size, surface charge, components, etc. have to be understood and controlled. This review provided a brief overview of the structure of the skin as well as the different pathways of nanoparticle penetration. In addition, the main factors influencing the penetration of nanoparticles have been highlighted. Applications of lipid nanosystems for dermal and transdermal delivery, as well as regulatory aspects, were critically discussed.

Lipid Membrane Flexibility in Protic Ionic Liquids

Here, we determine by neutron spin echo spectrometry (NSE) how the flexibility of egg lecithin vesicles depends on solvent composition in two protic ionic liquids (PILs) and their aqueous mixtures. In combination with small-angle neutron scattering (SANS), dynamic light scattering (DLS), and fluorescent probe microscopy, we show that the bending modulus is up to an order of magnitude lower than in water but with no change in bilayer thickness or nonpolar chain composition. This effect is attributed to the dynamic association and exchange of the IL cation between the membrane and bulk liquid, which has the same origin as the underlying amphiphilic nanostructure of the IL solvent itself. This provides a new mechanism by which to tune and control lipid membrane behavior.

An Injectable In Situ Depot-Forming Lipidic Lyotropic Liquid Crystal System for Localized Intratumoral Drug Delivery

To address the need for localized chemotherapy against unresectable solid tumors, an injectable in situ depot-forming lipidic lyotropic liquid crystal system (L3CS) is explored that can provide spatiotemporal control over drug delivery. Although liquid crystals have been studied extensively before but their application as an injectable intratumoral depot system for locoregional chemotherapy has not been explored yet. The developed L3CS in the present study is a low-viscosity injectable fluid having a lamellar phase, which transforms into a hexagonal mesophase depot system on subcutaneous or intratumoral injection. The transformed depot system can be preprogrammed to provide tailored drug release intratumorally, over a period of one week to one month. To establish the efficacy of the developed L3CS, doxorubicin is used as a model drug. The drug release mechanism is studied in detail both in vitro and in vivo, and the efficacy of the developed system is investigated in the murine 4T1 tumor model. The direct intratumoral injection of the L3CS provided localized delivery of doxorubicin inside the tumor and restricted its access within the tumor only for a sustained period of time. This led to an over 10-fold reduction in tumor burden, reduced cardiotoxicity, and a significant increase in the median survival rate, compared to the control group. The developed L3CS thus provides an efficient strategy for localized chemotherapy against unresectable solid tumors with a great degree of spatial and temporal control over drug delivery.

Spontaneous Formation of Stable Vesicles and Vesicle Gels in Polar Organic Solvents

The self-assembly of lipids into nanoscale vesicles (liposomes) is routinely accomplished in water. However, reports of similar vesicles in polar organic solvents like glycerol, formamide, and ethylene glycol (EG) are scarce. Here, we demonstrate the formation of nanoscale vesicles in glycerol, formamide, and EG using the common phospholipid lecithin (derived from soy). The samples we study are simple binary mixtures of lecithin and the solvent, with no additional cosurfactants or salt. Lecithin dissolves readily in the solvents and spontaneously gives rise to viscous fluids at low lipid concentrations (∼2-4%), with structures ∼200 nm detected by dynamic light scattering. At higher concentrations (>10%), lecithin forms clear gels that are strongly birefringent at rest. Dynamic rheology confirms the elastic response of gels, with their elastic modulus being ∼20 Pa at ∼10% lipid. Images from cryo-scanning electron microscopy (cryo-SEM) indicate that concentrated samples are "vesicle gels," where multilamellar vesicles (MLVs, also called "onions"), with diameters between 50 and 600 nm, are close-packed across the sample volume. This structure can explain both the elastic rheology as well as the static birefringence of the samples. The discovery of vesicles and vesicle gels in polar solvents widens the scope of systems that can be created by self-assembly. Interestingly, it is much easier to form vesicles in polar solvents than in water, and the former are stable indefinitely, whereas the latter tend to aggregate or coalesce over time. The stability is attributed to refractive index-matching between lipid bilayers and the solvents, i.e., these vesicles are relatively "invisible" and thus experience only weak attractions. The ability to use lipids (which are "green" or eco-friendly molecules derived from renewable natural sources) to thicken and form gels in polar solvents could also prove useful in a variety of areas, including cosmetics, pharmaceuticals, and lubricants.

Vesicular drug delivery for the treatment of topical disorders: current and future perspectives

OBJECTIVES

Vesicular drug delivery has become a useful approach for therapeutic administration of pharmaceutical compounds. Lipid vesicles have found application in membrane biology, immunology, genetic engineering and theragnostics. This review summarizes topical delivery, specifically dermal/transdermal, ocular and transungual, via these vesicles, including future formulation perspectives.

KEY FINDINGS

Liposomes and their subsequent derivatives, viz. niosomes, transferosomes, pharmacososmes and ethosomes, form a significant part of vesicular systems that have been successfully utilized in treating an array of topical disorders. These vesicles are thought to be a safe and effective mode of improving the delivery of lipophilic and hydrophilic drugs.

SUMMARY

Several drug molecules are available for topical disorders. However, physicochemical properties and undesirable toxicity have limited their efficacy. Vesicular delivery systems have the potential to overcome these shortcomings due to properties such as high biocompatibility, simplicity of surface modification and suitability as controlled delivery vehicles. However, incorporating these systems into environmentally responsive dispersants such as hydrogels, ionic liquids and deep eutectic solvents may further enhance therapeutic prowess of these delivery systems. Consequently, improved vesicular drug delivery can be achieved by considering combining some of these formulation approaches.

Synergistic interactions of ionic liquids and antimicrobials improve drug efficacy

Combinations of ionic liquids (ILs) with antimicrobial compounds have been shown to produce synergistic activities in model liposomes. In this study, imidazolium chloride-based ILs with alkyl tail length variations are combined with commercially available, small-molecule antimicrobials to examine the potential for combinatorial and synergistic antimicrobial effects on P. aeruginosa, E. coli, S. aureus, and S. cerevisiae. The effects of these treatments in a human cell culture model indicate the cytotoxic limits of ILs paired with antimicrobials. The analysis of these ILs demonstrates that the length of the alkyl chain on the IL molecule is proportional to both antimicrobial activity and cytotoxicity. Moreover, the ILs which exhibit synergy with small-molecule antibiotics appear to be acting in a membrane permeabilizing manner. Collectively, results from these experiments demonstrate an increase in antimicrobial efficacy with specific IL + antimicrobial combinations on microbial cultures while maintaining low cytotoxicity in a mammalian cell culture model.

Morphological and Interaction Characteristics of Surface-Active Ionic Liquids and Palmitic Acid in Mixed Monolayers

A series of water soluble, surface-active ionic liquids (SAILs), namely, 1-alkyl-3-methyl imidazolium chlorides ([C_n -mim]Cl) and their mixtures with palmitic acid (PA) are investigated in Langmuir monolayers and Langmuir-Blodgett films. It is inferred from the surface pressure-area isotherms that C₁₆ -mim-IL mixes non-ideally with PA and stabilizes the binary mixed films. In addition, the residence of mim-IL at the water surface is enhanced as a function of the increasing alkyl side chain length. Generally, the compressional moduli values decrease upon increasing the content of the mim-ILs over a wide range of compositions. Furthermore, film relaxation measurements indicate that the IL component is selectively excluded from the mixed films upon achieving a certain target pressure. Brewster angle microscope images demonstrate minimal changes on the PA domains in the presence of either C₄ - and C₈ -mim-ILs, whereas presence of the hexadecyl counterpart results in the formation of condensed sheets. Atomic force microscopy imaging of deposited films show the formation of propeller-like aggregates when C₈ - or C₁₆ -mim-IL is present in the mixed films.

Modulations in Self-Organization Properties of Surfactant in Aqueous Ionic Liquid Media

Ionic liquids (ILs) give a wide scope of favorable applications due to their much-upgraded properties. The strong electrostatic interactions between the cationic moiety of IL and the anionic surfactant play a very important role in the assembly of the large aggregates. We have investigated the aggregation behavior of anionic surfactants and IL in aqueous solution. Different temperatures and concentrations of IL have been taken to study the effect on critical micelles concentrations of surfactant. The critical micelle concentration values obtained by conductivity measurements are further confirmed by the fluorescence studies. The method is based on the fit of the experimental obtained raw data of fluorescence spectroscopy to a simple nonlinear category of a Boltzmann type sigmoidal function. Thermodynamical parameters of micellization Δ H m 0 $\Delta H_{m}^{0}$ , Δ G m 0 $\Delta G_{m}^{0}$ and Δ S m 0 $\Delta S_{m}^{0}$ have been considered to study the effect of aqueous IL 1-butyl-3-methylimidazolium bromide concentration and temperature on aggregation behavior of surfactant sodium dodecyl sulfate. FT-IR spectra have been studies to verify the structural changes arise in the aqueous IL and surfactant system.

Correlating Lipid Membrane Permeabilities of Imidazolium Ionic Liquids with their Cytotoxicities on Yeast, Bacterial, and Mammalian Cells

Alkyl-imidazolium chloride ionic liquids (ILs) have been broadly studied for biochemical and biomedical technologies. They can permeabilize lipid bilayer membranes and have cytotoxic effects, which makes them targets for drug delivery biomaterials. We assessed the lipid-membrane permeabilities of ILs with increasing alkyl chain lengths from ethyl to octyl groups on large unilamellar vesicles using a trapped-fluorophore fluorescence lifetime-based leakage experiment. Only the most hydrophobic IL, with the octyl chain, permeabilizes vesicles, and the concentration required for permeabilization corresponds to its critical micelle concentration. To correlate the model vesicle studies with biological cells, we quantified the IL permeabilities and cytotoxicities on different cell lines including bacterial, yeast, and ovine blood cells. The IL permeabilities on vesicles strongly correlate with permeabilities and minimum inhibitory concentrations on biological cells. Despite exhibiting a broad range of lipid compositions, the ILs appear to have similar effects on the vesicles and cell membranes.

Liquid crystalline microspheres of azobenzene amphiphiles formed by thermally induced pH changes in binary water-hydrolytic ionic liquid media

Anionic azobenzene-containing bilayered membranes dispersed in binary water-ionic liquid (IL) media undergo proton-responsive transformation into liquid crystalline microspheres (LCMs). This transformation was induced by protons released by the heat-induced hydrolysis of tetrafluoroborate ions in the ILs. This work demonstrates the first beneficial use of hydrolysis-susceptible ILs in chemistry.

A concerted addition mechanism in [Hmim]Br-triggered thiol–ene reactions: a typical “ionic liquid effect” revealed by DFT and experimental studies

The π⁺–π and H-bond interactions between [Hmim]Br and substrates promote a special one-step addition mechanism in thiol–ene reactions.

Room-Temperature Ionic Liquids and Biomembranes: Setting the Stage for Applications in Pharmacology, Biomedicine, and Bionanotechnology

Empirical evidence and conceptual elaboration reveal and rationalize the remarkable affinity of organic ionic liquids for biomembranes. Cations of the so-called room-temperature ionic liquids (RTILs), in particular, are readily absorbed into the lipid fraction of biomembranes, causing a variety of observable biological effects, including generic cytotoxicity, broad antibacterial potential, and anticancer activity. Chemical physics analysis of model systems made of phospholipid bilayers, RTIL ions, and water confirm and partially explain this evidence, quantifying the mild destabilizing effect of RTILs on the structural, dynamic, and thermodynamic properties of lipids in biomembranes. Our Feature Article presents a brief introduction to these systems and to their roles in biophysics and biotechnology, summarizing recent experimental and computational results on their properties. More importantly, it highlights the many developments in pharmacology, biomedicine, and bionanotechnology expected from the current research effort on this topic. To anticipate future developments, we speculate on (i) potential applications of (magnetic) RTILs to affect and control the rheology of cells and biological tissues, of great relevance for diagnostics and (ii) the use of RTILs to improve the durability, reliability, and output of biomimetic photovoltaic devices.

Thermodynamics of interaction of ionic liquids with lipid monolayer

Understanding the interaction of ionic liquids with cellular membrane becomes utterly important to comprehend the activities of these liquids in living organisms. Lipid monolayer formed at the air-water interface is employed as a model system to follow this interaction by investigating important thermodynamic parameters. The penetration kinetics of the imidazolium-based ionic liquid 1-decyl-3-methylimidazolium tetrafluoroborate ([DMIM][BF4]) into the zwitterionic 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid layer is found to follow the Boltzmann-like equation that reveals the characteristic time constant which is observed to be the function of initial surface pressure. The enthalpy and entropy calculated from temperature-dependent pressure-area isotherms of the monolayer show that the added ionic liquids bring about a disordering effect in the lipid film. The change in Gibbs free energy indicates that an ionic liquid with longer chain has a far greater disordering effect compared to an ionic liquid with shorter chain. The differential scanning calorimetric measurement on a multilamellar vesicle system shows the main phase transition temperature to shift to a lower value, which, again, indicates the disordering effect of the ionic liquid on lipid membrane. All these studies fundamentally point out that, when ionic liquids interact with lipid molecules, the self-assembled structure of a cellular membrane gets perturbed, which may be the mechanism of these molecules having adverse effects on living organisms.

Membrane interactions of ionic liquids and imidazolium salts

Room-temperature ionic liquids (RTILs) have attracted considerable attention in recent years due to their versatile properties such as negligible volatility, inflammability, high extractive selectivity and thermal stability. In general, RTILs are organic salts with a melting point below ~100 °C determined by the asymmetry of at least one of their ions. Due to their amphiphilic character, strong interactions with biological materials can be expected. However, rising attention has appeared towards their similarity and interaction with biomolecules. By employing structural modifications, the biochemical properties of RTILs can be designed to mimic lipid structures and to tune their hydrophobicity towards a lipophilic behavior. This is evident for the interaction with lipid-membranes where some of these compounds present membrane-disturbing effects or cellular toxicity. Moreover, they can form micelles or lipid-like bilayer structures by themselves. Both aspects, cellular effects and membrane-forming capacities, of a novel class of lipophilic imidazolium salts will be discussed.

Synergistic effects of polymyxin and ionic liquids on lipid vesicle membrane stability and aggregation

Ionic liquids (ILs) have been investigated for potential antibacterial and antibiotic applications due to their ability to destabilize and permeabilize the lipid bilayers in cell membranes. Bacterial assays have shown that combining ILs with antibiotics can provide a synergistic enhancement of their antibacterial activities. We have characterized the mechanism by which the conventional ILs 1-butyl-3-methylimidazolium chloride (BMICl) and 1-butyl-3-methylimidazolium tetrafluoroborate (BMIBF₄) enhance the lipid membrane permeabilization of the well-known antibiotic polymyxin B (PMB). We studied the sizes and membrane permeabilities of multilamellar and unilamellar lipid bilayer vesicles in the presence of ILs alone in aqueous solution, PMB alone, and ILs combined together with PMB. Light scattering-based experiments show that vesicle sizes dramatically increase when ILs are combined with PMB, which suggests that the materials combine to synergistically enhance lipid membrane disruption leading to vesicle aggregation. Lipid bilayer leakage experiments using tris (2,2'-bipyridyl) ruthenium (II) (Ru(bpy)₃²⁺) trapped in lipid vesicles, in which the trapped Ru(bpy)₃²⁺ fluorescence lifetime increases when it leaks out of the vesicle, show that combining BMIBF₄ and PMB together permeabilize the membrane significantly more than with PMB or the IL alone. This demonstrates that ILs can assist in antibiotic permeabilization of lipid bilayers which could explain the increased antibiotic activities in the presence of ILs in solution.

Effect of protic ionic liquid nanostructure on phospholipid vesicle formation

The formation of bilayer-based lyotropic liquid crystals and vesicle dispersions by phospholipids in a range of protic ionic liquids has been investigated by polarizing optical microscopy using isothermal penetration scans, differential scanning calorimetry, and small angle X-ray and neutron scattering. The stability and structure of both lamellar phases and vesicle dispersions is found to depend primarily on the underlying amphiphilic nanostructure of the ionic liquid itself. This finding has significant implications for the use of ionic liquids in soft and biological materials and for biopreservation, and demonstrates how vesicle structure and properties can be controlled through selection of cation and anion. For a given ionic liquid, systematic trends in bilayer thickness, chain-melting temperature and enthalpy increase with phospholipid acyl chain length, paralleling behaviour in aqueous systems.

Imidazolium Salts Mimicking the Structure of Natural Lipids Exploit Remarkable Properties Forming Lamellar Phases and Giant Vesicles

Tailor-made ionic liquids based on imidazolium salts have recently attracted a large amount of attention because of their extraordinary properties and versatile functionality. An intriguing ability to interact with and stabilize membranes has already been reported for 1,3-dialkylimidazolium compounds. We now reveal further insights into the field by investigating 1,3-dimethyl-4,5-dialkylimidazolium (C_n-IMe·HI, n = 7, 11, 15) and 1,3-dibenzyl-4,5-dialkylimidazolium (C_n-IBn·HBr, n = 7, 11, 15) salts. Diverse alkyl chain lengths and headgroups differing in their steric demand were employed for the membrane interface interaction with bilayer membranes imitating the cellular plasma membrane. Membrane hydration properties and domain fluidization were analyzed by fluorescent bilayer probes in direct comparison to established model membranes in a buffered aqueous environment, which resembles the salt content and pH of the cytosol of living cells. Membrane binding and insertion was analyzed via a quartz crystal microbalance and confocal laser scanning microscopy. We show that short-chain 4,5-dialkylimidazolium salts with a bulky headgroup were able to disintegrate membranes. Long-chain imidazolium salts form bilayer membrane vesicles spontaneously and autonomously without the addition of other lipids. These 4,5-dialkylimidazolium salts are highly eligible for further biochemical engineering and drug delivery.

Acid-induced chemoselective arylthiolations of electron-rich arenes in ionic liquids from sodium arylsulfinates: the reducibility of halide anions in [Hmim]Br

An odorless approach for arylthiolations of arenes is introduced, in which [Hmim]Br is used as both a solvent and a reducer.

Towards life in hydrocarbons: aggregation behaviour of “reverse” surfactants in cyclohexane

Unconventional life forms based on membranes able to self-assemble in hydrocarbons instead of water might exist in the hydrocarbon-rich environment of Titan. We present evidence of the self-assembly of reverse surfactants to yield typical micelles in a hydrocarbon solvent.

Spontaneous vesicle formation in a deep eutectic solvent

Solvent penetration experiments and small-angle X-ray scattering reveal that phospholipids dissolved in a deep eutectic solvent (DES) spontaneously self-assemble into vesicles above the lipid chain melting temperature. This means DESs are one of the few nonaqueous solvents that mediate amphiphile self-assembly, joining a select set of H-bonding molecular solvents and ionic liquids.

Unusually high thermal stability and peroxidase activity of cytochrome c in ionic liquid colloidal formulation

All ionic liquid-based colloidal formulation as a thermally stable medium for enzyme biocatalysis.

Amphiphile self-assemblies in supercritical CO2 and ionic liquids

Supercritical (sc) CO2 and ionic liquids (ILs) are very attractive green solvents with tunable properties. Using scCO2 and ILs as alternatives of conventional solvents (water and oil) for forming amphiphile self-assemblies has many advantages. For example, the properties and structures of the amphiphile self-assemblies in these solvents can be easily modulated by tuning the properties of solvents; scCO2 has excellent solvation power and mass-transfer characteristics; ILs can dissolve both organic and inorganic substances and their properties are designable to satisfy the requirements of various applications. Therefore, the amphiphile self-assemblies in scCO2 and ILs have attracted considerable attention in recent years. This review describes the advances of using scCO2 or/and ILs as amphiphile self-assembly media in the last decade. The amphiphile self-assemblies in scCO2 and ILs are first reviewed, followed by the discussion on combination of scCO2 and ILs in creating microemulsions or emulsions. Some future directions on the amphiphile self-assemblies in scCO2 and ILs are highlighted.

Asymmetrical flow field-flow fractionation with multi-angle light scattering and quasi-elastic light scattering for characterization of polymersomes: comparison with classical techniques

Polymersomes formed from amphiphilic block copolymers, such as poly(ethyleneoxide-b-ε-caprolactone) (PEO-b-PCL) or poly(ethyleneoxide-b-methylmethacrylate), were characterized by asymmetrical flow field-flow fractionation coupled with quasi-elastic light scattering (QELS), multi-angle light scattering (MALS), and refractive index detection, leading to the determination of their size, shape, and molecular weight. The method was cross-examined with more classical ones, like batch dynamic and static light scattering, electron microscopy, and atomic force microscopy. The results show good complementarities between all the techniques; asymmetrical flow field-flow fractionation being the most pertinent one when the sample exhibits several different types of population.

Self-assembly of azobenzene bilayer membranes in binary ionic liquid-water nanostructured media

Anionic azobenzene-containing amphiphile 1 (sodium 4-[4-(N-methyl-N-dodecylamino)phenylazo]benzenesulfonate) forms ordered bilayer membranes in binary ionic liquid (1-ethyl-3-methylimidazolium ethyl sulfate, [C2mim][C2OSO3])-water mixtures. The binary [C2mim][C2OSO3]-water mixture is macroscopically homogeneous at any mixing ratio; however, it possesses fluctuating nanodomains of [C2mim][C2OSO3] molecules as observed by dynamic light scattering (DLS). These nanodomains show reversible heat-induced mixing behavior with water. Although the amphiphile 1 is substantially insoluble in pure water, it is dispersible in the [C2mim][C2OSO3]-water mixtures. The concentration of [C2mim][C2OSO3] and temperature exert significant influences on the self-assembling characteristics of 1 in the binary media, as shown by DLS, transmission electron microscopy (TEM), UV-vis spectroscopy, and zeta-potential measurements. Bilayer membranes with rod- or dotlike nanostructures were formed at a lower content of [C2mim][C2OSO3] (2-30 v/v %), in which azobenzene chromophores adopt parallel molecular orientation regardless of temperature. In contrast, when the content of [C2mim][C2OSO3] is increased above 60 v/v %, azobenzene bilayers showed thermally reversible gel-to-liquid crystalline phase transition. The self-assembly of azobenzene amphiphiles is tunable depending on the volume fraction of [C2mim][C2OSO3] and temperature, which are associated with the solvation by nanoclusters in the binary [C2mim][C2OSO3]-water media. These observations clearly indicate that mixtures of water-soluble ionic liquids and water provide unique and valiant environments for ordered molecular self-assembly.

High Partial Compression of 1-Butyl-3-Methylimidazolium Bis(trifluoromethylsulfonyl)imide Diluted in 2,6-Dimethylpyridine+Water Solvent

Phase properties, molar volumes, isentropic compressions and isobaric thermal expansions of the system 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C4mim][Tf2N]+2,6-dimethylpyridine+ water were studied and interpreted in terms of molecular interactions. The solvation of [C4mim][Tf2N] diluted in the binary solvent consists most probably in the accommodation of the ions between pyridine rings of the hydrogen-bonded hydrates of 2,6-dimethylpyridine (C7H9N...H–OH) n . Cations and anions are located in the neighbouring voids forming ionic pairs. That process is dependent on the electric permittivity of the solvent, The higher is the permittivity, i.e. the lower is the concentration of 2,6-dimethylpyridine, the larger are limiting partial compression and volumes of [C4mim][Tf2N] due to weakened Coulomb forces that act between ions. That leads to gradual decay of the ion pairs. The effect on compression is particularly pronounced, while that on volume is small, but evident. Solvation of ions causes that the limiting partial expansion of [C4mim][Tf2N] is equal to zero or at least close to that value. With increasing concentration of the ionic liquid, the solvation shells undergo disruption that leads to the phase separation.

Investigating the motion of diblock copolymer assemblies in ionic liquids by in situ electron microscopy

The movement of individual block copolymer micelles in free-standing films of ionic liquids is investigated by transmission electron microscopy with the aim of providing an easily accessible high-resolution imaging tool for the in situ observation of particle movement in a liquid environment. A proof of concept and first studies on the behavior of individual particles in the fluid are demonstrated.