Combined ATRP and 'click' chemistry for designing stable tumor-targeting superparamagnetic iron oxide nanoparticles

Novel targeted pH-responsive drug delivery systems based on PEGMA-modified bimetallic Prussian blue analogs for breast cancer chemotherapy

The development of novel nanoparticle-based drug delivery systems (nano-DDSs) with high loading capacity, low toxicity, precise targeting, and excellent biocompatibility remains urgent and important for the treatment of breast cancer (BC). Herein, novel BC-targeted nano-DDSs based on bimetallic Prussian blue analogs (PBA-DDSs) for intracellular doxorubicin (DOX) delivery and pH-responsive release were developed. Two kinds of bimetallic PBA, namely CuFe (copper-iron) PBA and CoFe (cobalt-iron) PBA, were synthesized by a coprecipitation method, followed by modification with polyethyleneglycol methacrylate (PEGMA) via surface-initiated atom transfer radical polymerization and immobilization with the AS1411 aptamer to obtain two kinds of novel BC-targeted nano-DDS. CuFePBA@PEGMA@AS1411 and CoFePBA@PEGMA@AS1411 showed high drug loading efficiency of 80% and 84%, respectively, for DOX, while 56.0% and 75.9% DOX release could be achieved under acidic pH conditions. In vitro cell viability and in vivo experiments proved the good biocompatibility of both PBA-DDSs. Cellular uptake and in vivo distribution suggested that both PBA-DDSs had efficient nucleolin-targeting capability, indicating the targeted delivery of DOX in tumor tissues. In vivo evaluation of anti-BC efficacy further confirmed that the obtained PBA-DDSs exhibited excellent therapeutic efficacy with limited side-effects. Therefore, the proposed novel PBA-DDSs can be used as secure and effective drug nano-DDSs for BC chemotherapy.

Recent advances in magnetic fluid hyperthermia for cancer therapy

Recently, magnetic fluid hyperthermia using biocompatible magnetic nanoparticles as heat mediators for cancer therapy has been extensively investigated due to its high efficiency and limited side effects. However, the development of more efficient heat nanomediators that exhibit very high specific absorption rate (SAR) value is essential for clinical application to overcome the several restrictions previously encountered due to the large quantity of nanomaterial required for effective treatment. In this review, we focus on the current progress in the development of magnetic nanoparticles based hyperthermia therapy as well as combined therapy harnessing hyperthermia with heat-mediated drug delivery for cancer treatment. We also address the fundamental principles of magnetic hyperthermia, basics of magnetism including the effect of several parameters on heating capacity, synthetic methods and nanoparticle surface chemistry needed to design and develop an ideal magnetic nanoparticle heat mediator suitable for clinical translation in cancer therapy.

Design, Synthesis and Architectures of Hybrid Nanomaterials for Therapy and Diagnosis Applications

Hybrid nanomaterials based on inorganic nanoparticles and polymers are highly interesting structures since they combine synergistically the advantageous physical-chemical properties of both inorganic and polymeric components, providing superior functionality to the final material. These unique properties motivate the intensive study of these materials from a multidisciplinary view with the aim of finding novel applications in technological and biomedical fields. Choosing a specific synthetic methodology that allows for control over the surface composition and its architecture, enables not only the examination of the structure/property relationships, but, more importantly, the design of more efficient nanodevices for therapy and diagnosis in nanomedicine. The current review categorizes hybrid nanomaterials into three types of architectures: core-brush, hybrid nanogels, and core-shell. We focus on the analysis of the synthetic approaches that lead to the formation of each type of architecture. Furthermore, most recent advances in therapy and diagnosis applications and some inherent challenges of these materials are herein reviewed.

“Click” functionalization of dual stimuli-responsive polymer nanocapsules for drug delivery systems

“Clickable” and dual stimuli-responsive nanocapsules were developed for facile surface functionalizationviathiol–yne click chemistry and employed as drug nano-carriers.

Fabrication and photoactivity of short rod-shaped mesoporous SiO2@TiO2 composites with TiO2 shell

Short rod-shaped mesoporous SiO₂@TiO₂ composites containing TiO₂ shell were prepared using short rod-shaped mesoporous SiO₂–PGMA–PEGMA as template and TBT as titanium source.

Characterization of bi-layered magnetic nanoparticles synthesized via two-step surface-initiated ring-opening polymerization

A versatile strategy to integrate multiple functions in a polymer based material is the formation of polymer networks with defined nanostructures. Here, we present synthesis and comprehensive characterization of covalently surface functionalized magnetic nanoparticles (MNPs) comprising a bi-layer oligomeric shell, using Sn(Oct)2 as catalyst for a two-step functionalization. These hydroxy-terminated precursors for degradable magneto- and thermo-sensitive polymer networks were prepared via two subsequent surface-initiated ring-opening polymerizations (ROPs) with ω-pentadecalactone and ε-caprolactone. A two-step mass loss obtained in thermogravimetric analysis and two distinct melting transitions around 50 and 85°C observed in differential scanning calorimetry experiments, which are attributed to the melting of OPDL and OCL crystallites, confirmed a successful preparation of the modified MNPs. The oligomeric coating of the nanoparticles could be visualized by transmission electron microscopy. The investigation of degrafted oligomeric coatings by gel permeation chromatography and 1H-NMR spectroscopy showed an increase in number average molecular weight as well as the presence of signals related to both of oligo(ω-pentadecalactone) (OPDL) and oligo(ε-caprolactone) (OCL) after the second ROP. A more detailed analysis of the NMR results revealed that only a few ω-pentadecalactone repeating units are present in the degrafted oligomeric bi-layers, whereby a considerable degree of transesterification could be observed when OPDL was polymerized in the 2nd ROP step. These findings are supported by a low degree of crystallinity for OPDL in the degrafted oligomeric bi-layers obtained in wide angle X-ray scattering experiments. Based on these findings it can be concluded that Sn(Oct)2 was suitable as catalyst for the preparation of nanosized bi-layered coated MNP precursors by a two-step ROP.

Recent advances in superparamagnetic iron oxide nanoparticles (SPIONs) for in vitro and in vivo cancer nanotheranostics

Recently superparamagnetic iron oxide nanoparticles (SPIONs) have been extensively used in cancer therapy and diagnosis (theranostics) via magnetic targeting, magnetic resonance imaging, etc. due to their remarkable magnetic properties, chemical stability, and biocompatibility. However, the magnetic properties of SPIONs are influenced by various physicochemical and synthesis parameters. So, this review mainly focuses on the influence of spin canting effects, introduced by the variations in size, shape, and organic/inorganic surface coatings, on the magnetic properties of SPIONs. This review also describes the several predominant chemical synthesis procedures and role of the synthesis parameters for monitoring the size, shape, crystallinity and composition of the SPIONs. Moreover, this review discusses about the latest developments of the inorganic materials and organic polymers for encapsulation of the SPIONs. Finally, the most recent advancements of the SPIONs and their nanopackages in combination with other imaging/therapeutic agents have been comprehensively discussed for their effective usage as in vitro and in vivo theranostic agents in cancer treatments.

Combination of magnetic and enhanced mechanical properties for copolymer-grafted magnetite composite thermoplastic elastomers

Composite thermoplastic elastomers (CTPEs) of magnetic copolymer-grafted nanoparticles (magnetite, Fe3O4) were synthesized and characterized to generate magnetic CTPEs, which combined the magnetic property of Fe3O4 nanoparticles and the thermoplastic elasticity of the grafted amorphous polymer matrix. Fe3O4 nanoparticles served as stiff, multiple physical cross-linking points homogeneously dispersed in the grafted poly(n-butyl acrylate-co-methyl methacrylate) rubbery matrix synthesized via the activators regenerated by electron transfer for atom transfer radical polymerization method (ARGET ATRP). The preparation technique for magnetic CTPEs opened a new route toward developing a wide spectrum of magnetic elastomeric materials with strongly enhanced macroscopic properties. Differential scanning calorimetry (DSC) was used to measure the glass transition temperatures, and thermogravimetric analysis (TGA) was used to examine thermal stabilities of these CTPEs. The magnetic property could be conveniently tuned by adjusting the content of Fe3O4 nanoparticles in CTPEs. Compared to their linear copolymers, these magnetic CTPEs showed significant increases in tensile strength and elastic recovery. In situ small-angle X-ray scattering measurement was conducted to reveal the microstructural evolution of CTPEs during tensile deformation.

Magnetic nanomaterials with near-infrared pH-activatable fluorescence via iron-catalyzed AGET ATRP for tumor acidic microenvironment imaging

This work provides a fluorescent/magnetic iron oxide nanomaterials prototype to visualize the solid tumor in vivo by sensing the tumor acidic microenvironment, and a satisfactory tumor-to-normal tissue signal ratio (T/N ratio) and a prolonged time-window for 4T1 tumor visualization were observed in vivo.

Folic acid-conjugated glucose and dextran coated iron oxide nanoparticles as MRI contrast agents for diagnosis and treatment response of rheumatoid arthritis

Coating superparamagnetic iron oxide (SPIO) with dextran increases the stability of the magnetic nanoparticles during blood circulation, yet this is accompanied by an increase in the particle size and the vascular permeability efficiency of the SPIO nanoparticles into the joints decreases. In our study, the thickness of the dextran coated onto SPIO (dex-SPIO) was optimized without affecting the magnetic quality of iron oxide by adding a suitable amount of glucose into the crystal growth process. To further improve the signal enhancement effect of this glucose and dextran coated SPIO (glu-dex-SPIO) for the detection of the inflammatory site of arthritis, folic acid (FA) was conjugated to glu-dex-SPIO. This FA glu-dex-SPIO was used as a negative contrast agent for MRI to visualize the antigen induce arthritis (AIA) model in rats using a 7 T MR scans. MR imaging revealed more significant differences between the synovium and surrounding tissues with FA glu-dex SPIO than when using the non-targeting glu-dex-SPIO over a long period of time (24 h) after intravenous injection. Moreover, the therapeutic efficacy of the cyclooxygenase 2 (COX-2) inhibitor treatment of the inflamed joints also could be confirmed by using FA glu-dex SPIO enhanced MRI, indicating that this type of nanoparticles could also have potential as a contrast agent for measuring the treatment response of rheumatoid arthritis.

Fabrication and photoactivity of a tunable-void SiO₂-TiO₂ core-shell structure on modified SiO₂ nanospheres by grafting an amphiphilic diblock copolymer using ARGET ATRP

SiO₂-based composites have important applications in various technological fields. In this work, a tunablevoid SiO₂-TiO₂ core-shell structure was successfully prepared for the first time using SiO₂-polymethyl methacrylate (PMMA)-polyoligo(ethylene glycol)methyl ether methacrylate (PO(EO)nMA) (n = 2, 5, and 8). An amphiphilic copolymer was used as the template, and calcination was performed using tetrabutyl titanate (TBT) as the titanium source. SiO₂-PMMA-b-PO(EO)nMA microspheres were first synthesized through activators regenerated by electron transfer-atom transfer radical polymerization. Methyl methacrylate and O(EO)nMA were grafted with different EO unit numbers onto the surface of the halogen functional group of SiO₂. TBT was hydrolyzed along with the PO(EO)nMA chain through hydrogen bonding, and then the SiO₂-TiO₂ core-shell structure was acquired through calcination to remove the polymer. Simultaneously, amorphous TiO₂ crystallized during calcination. A series of characterizations indicated that the amphiphilic block copolymer was grafted onto SiO₂ mesoparticle surfaces, the titania samples existed only in the anatase phase, and the prepared SiO₂-TiO₂ had hierarchically nanoporous structures. The gradient hydrophilicity of the PMMA-b-PO(EO)nMA copolymer template facilitated the hydrolysis of TBT molecules along the PO(EO)nMA to PMMA segments, thereby tuning the space between the core and the shell. In addition, the space was about 6 nm when the EO number was 2, and the space was about 10 nm when the EO numbers were 5 and 8. The photocatalytic activities of the SiO₂-TiO₂ materials were tested on the photodegradation of methyl orange.

A rheumatoid arthritis magnetic resonance imaging contrast agent based on folic acid conjugated PEG-b-PAA@SPION

FA-PEG-b-PAA@SPPION offers a unique contrast ability for MRI of rheumatoid arthritis.

Application of Iron Oxide Nanomaterials for the Removal of Heavy Metals

In the 21st century water polluted by heavy metal is one of the environment problems. Various methods for removal of the heavy metal ions from the water have extensively been studied. Application of iron oxide nanaparticles based nanomaterials for removal of heavy metals is well-known adsorbents for remediation of water. Due to its important physiochemical property, inexpensive method and easy regeneration in the presence of external magnetic field make them more attractive toward water purification. Surface modification strategy of iron oxide nanoparticles is also used for the remediation of water increases the efficiency of iron oxide for the removal of the heavy metal ions from the aqueous system.

Inorganic nanocrystals as contrast agents in MRI: synthesis, coating and introduction of multifunctionality

Inorganic nanocrystals have myriad applications in medicine, including their use as drug or gene delivery complexes, therapeutic hyperthermia agents, in diagnostic systems and as contrast agents in a wide range of medical imaging techniques. In MRI, nanocrystals can produce contrast themselves, with iron oxides having been the most extensively explored, or can be given a coating that generates MR contrast, for example gold nanoparticles coated with gadolinium chelates. These MR-active nanocrystals can be used for imaging of the vasculature, liver and other organs, as well as molecular imaging, cell tracking and theranostics. As a result of these exciting applications, the synthesis and rendering of these nanocrystals as water soluble and biocompatible are therefore highly desirable. We discuss aqueous phase and organic phase methods for the synthesis of inorganic nanocrystals, such as gold, iron oxides and quantum dots. The pros and cons of the various methods are highlighted. We explore various methods for making nanocrystals biocompatible, i.e. direct synthesis of nanocrystals coated with biocompatible coatings, ligand substitution, amphiphile coating and embedding in carrier matrices that can be made biocompatible. Various examples are highlighted and their applications explained. These examples signify that the synthesis of biocompatible nanocrystals with controlled properties has been achieved by numerous research groups and can be applied to a wide range of applications. Therefore, we expect to see reports of preclinical applications of ever more complex MRI-active nanoparticles and their wider exploitation, as well as in novel clinical settings.