In situ studies of the adsorption kinetics of 4-nitrobenzenediazonium salt on gold

Controlling the Carbon-Bio Interface via Glycan Functional Adlayers for Applications in Microbial Fuel Cell Bioanodes

Surface modification of electrodes with glycans was investigated as a strategy for modulating the development of electrocatalytic biofilms for microbial fuel cell applications. Covalent attachment of phenyl-mannoside and phenyl-lactoside adlayers on graphite rod electrodes was achieved via electrochemically assisted grafting of aryldiazonium cations from solution. To test the effects of the specific bio-functionalities, modified and unmodified graphite rods were used as anodes in two-chamber microbial fuel cell devices. Devices were set up with wastewater as inoculum and acetate as nutrient and their performance, in terms of output potential (open circuit and 1 kΩ load) and peak power output, was monitored over two months. The presence of glycans was found to lead to significant differences in startup times and peak power outputs. Lactosides were found to inhibit the development of biofilms when compared to bare graphite. Mannosides were found, instead, to promote exoelectrogenic biofilm adhesion and anode colonization, a finding that is supported by quartz crystal microbalance experiments in inoculum media. These differences were observed despite both adlayers possessing thickness in the nm range and similar hydrophilic character. This suggests that specific glycan-mediated bioaffinity interactions can be leveraged to direct the development of biotic electrocatalysts in bioelectrochemical systems and microbial fuel cell devices.

Mechanistic Insights into Interactions at Urea-Hydroxyapatite Nanoparticle Interface

Development of controlled release biomolecules by surface modification of hydroxyapatite nanoparticles has recently gained popularity in the areas of bionanotechnology and nanomedicine. However, optimization of these biomolecules for applications such as drug delivery, nutrient delivery requires a systematic understanding of binding mechanisms and interfacial kinetics at the molecular level between the nanomatrix and the active compound. In this research, urea is used as a model molecule to investigate its interactions with two morphologically different thin films of hydroxyapatite nanoparticles. These thin films were fabricated on quartz crystal piezoelectric sensors to selectively expose Ca²⁺ and PO₄^3- sites of hydroxyapatite. Respective urea adsorption and desorption on both of these sites were monitored in situ and in real time in the phosphate buffer solution that mimics body fluids. The measured kinetic parameters, which corroborate structural predisposition for controlled release, show desorption rates that are one-tenth of the adsorption rates on both surfaces. Furthermore, the rate of desorption from the PO₄^3- site is one-half the rate of desorption from the Ca²⁺ site. The Hill kinetic model was found to satisfactorily fit data, which explains cooperative binding between the hydroxyapatite nanoparticle thin film and urea. Fourier transform infrared spectra and X-ray photoemission spectra of the urea adsorbed on the above surfaces confirm the cooperative binding. It also elucidates the different binding mechanisms between urea and hydroxyapatite that contribute to the changes in the interfacial kinetics. These findings provide valuable information for structurally optimizing hydroxyapatite nanoparticle surfaces to control interfacial kinetics for applications in bionanotechnology and nanomedicine.

Three-color plasmon-mediated reduction of diazonium salts over metasurfaces

Surface plasmon-mediated chemical reactions are of great interest for a variety of applications ranging from micro- and nanoscale device fabrication to chemical reactions of societal interest for hydrogen production or carbon reduction. In this work, a crosshair-like nanostructure is investigated due to its ability to induce local enhancement of the local electromagnetic field at three distinct wavelengths corresponding to three plasmon resonances. The structures are irradiated in the presence of a solution containing diazonium salts at wavelengths that match the resonance positions at 532 nm, 632.8 nm, and 800 nm. The resulting grafting shows polarization and wavelength-dependent growth patterns at the nanoscale. The plasmon-mediated reactions over arrays of the crosshair structures are further investigated using scanning electron microscopy and supported by finite domain time domain modelling revealing wavelength and polarization specific reactions. Such an approach enables nanoscale molecular printing using light source opening multiplexing applications where different analytes can be grafted under distinct opto-geometric conditions.

Identifying Enclosed Chemical Reaction and Dynamics at the Molecular Level Using Shell-Isolated Miniaturized Plasmonic Liquid Marble

Current microscale tracking of chemical kinetics is limited to destructive ex situ methods. Here we utilize Ag nanocube-based plasmonic liquid marble (PLM) microreactor for in situ molecular-level identification of reaction dynamics. We exploit the ultrasensitive surface-enhanced Raman scattering (SERS) capability imparted by the plasmonic shell to unravel the mechanism and kinetics of aryl-diazonium surface grafting reaction in situ, using just a 2-μL reaction droplet. This reaction is a robust approach to generate covalently functionalized metallic surfaces, yet its kinetics remain unknown to date. Experiments and simulations jointly uncover a two-step sequential grafting process. An initial Langmuir chemisorption of sulfonicbenzene diazonium (dSB) salt onto Ag surfaces forms an intermediate sulfonicbenzene monolayer (Ag-SB), followed by subsequent autocatalytic multilayer growth of Ag-SB3. Kinetic rate constants reveal 19-fold faster chemisorption than multilayer growth. Our ability to precisely decipher molecular-level reaction dynamics creates opportunities to develop more efficient processes in synthetic chemistry and nanotechnology.

Electrochemical Attachment of Diazonium-Generated Films on Nanoporous Gold

Nanoporous gold provides a high surface area platform for further chemistry, but the stability of the molecular linkages to the surface will limit applications. We attached aryl molecular layers to nanoporous gold electrodes through electrochemical reduction of the corresponding aryl-diazonium salt and studied the properties and stability of the resulting films in varied attachment conditions. Infrared reflection absorption spectroscopy and X-ray photoelectron spectroscopy were used to confirm the presence of the molecular layers. X-ray photoelectron spectroscopy indicates that the molecular layer is thick and that attachment conditions can form multilayers. However, cyclic voltammetry shows that the multilayers do not block electrochemical activity at the nanoporous gold surface. The molecular layers are resistant to replacement by alkane-thiol chains and exhibit some stability with respect to applied potential. These results indicate that a thick but highly defective molecular film forms with a mixture of strongly and weakly bound molecules.

Spontaneous grafting of nitrophenyl groups on carbon: effect of radical scavenger on organic layer formation

The effect of a radical scavenger (DPPH: 2,2-diphenyl-1-picrylhydrazyl) on the spontaneous covalent grafting of nitrophenyl functionalities on a vitreous carbon substrate using the 4-nitrobenzene diazonium cation has been studied by electrochemical measurements and X-ray photoelectron spectroscopy. The addition of micromolar concentrations of DPPH to the diazonium solution efficiently limits the multilayer formation and leads to monolayer surface coverage. Control of polyaryl layer formation via the capture of the reactive nitrophenyl radical was also found to increase the proportion of nitrophenyl groups grafted to the surface via azo bridges. This work validates the recently reported strategy using a radical scavenger to prevent the formation of a polyaryl layer without interfering with direct surface grafting.