Bolaform superamphiphile based on a dynamic covalent bond and its self-assembly in water

Dynamic Covalent Bond-Based Polymer Chains Operating Reversibly with Temperature Changes

Dynamic bonds can facilitate reversible formation and dissociation of connections in response to external stimuli, endowing materials with shape memory and self-healing capabilities. Temperature is an external stimulus that can be easily controlled through heat. Dynamic covalent bonds in response to temperature can reversibly connect, exchange, and convert chains in the polymer. In this review, we introduce dynamic covalent bonds that operate without catalysts in various temperature ranges. The basic bonding mechanism and the kinetics are examined to understand dynamic covalent chemistry reversibly performed by equilibrium control. Furthermore, a recent synthesis method that implements dynamic covalent coupling based on various polymers is introduced. Dynamic covalent bonds that operate depending on temperature can be applied and expand the use of polymers, providing predictions for the development of future smart materials.

Dynamic covalent surfactants and their uses in the development of smart materials

Dynamic covalent chemistry, which leverages the dynamic nature of reversible covalent bonds controlled by the conditions of reaction equilibrium, has demonstrated great potential in diverse applications related to both the stability of covalent bonds and the possibility of exchanging building blocks, imparting to the systems the possibility of "error checking" and "proof-reading". By incorporating dynamic covalent bonds into surfactant molecular architectures, combinatorial libraries of surfactants with bespoke functionalities can be readily fabricated through a facile strategy, with minimum effort in organic synthesis. Consequently, a multidisciplinary field of research involving the creation and application of dynamic covalent surfactants has recently emerged, which has aroused great attention in surfactant and colloid science, supramolecular chemistry, self-assembly, smart materials, drug delivery, and nanotechnology. This review reports results in this field published over recent years, discusses the possibilities presented by dynamic covalent surfactants and their applications in developing smart self-assembled materials, and outlines some future perspectives.

Rational design of dynamic imine surfactants for oil-water emulsions: Learning from oil-induced reversible dynamic imine bond formation

HYPOTHESIS

Dynamic imine surfactants (DIS) can be constructed by the formation of dynamic imine bonds (Dibs) between aromatic aldehydes and aliphatic amines in water. Because of the nature of Dibs in water, a thermodynamic equilibrium state was achieved between the DIS and aldehyde and amine precursors to form a dynamic combinatorial library (DCL). When the DIS served as sole emulsifier to form oil-H₂O emulsions, the precursors migrated between the H₂O phase and the oil phase, which altered the DCL equilibrium. The DIS concentration and emulsion stability also changed.

EXPERIMENTS

By mixing 4-(2-sulfobetaine-ethoxy)-benzaldehyde (SBBA) and aliphatic amines of C_nH_2n+1NH₂ (n = 4, BA; n = 6, HA; n = 8, OA; n = 10, DA) in water, four amphoteric DIS (SBBA-BA/HA/OA/DA) were prepared. Dib formation was characterized using ¹H NMR. The DIS surface activity was studied by surface tension and fluorescence probe methods. The reversible switching of DIS and its wormlike micelles were explored.

FINDINGS

SBBA-OA (or SBBA-DA) DIS was not a suitable emulsifier for stable hydrocarbon (HC)-H₂O emulsions. OA and DA were more soluble in the HC phase than the H₂O phase. The precursors of OA and DA migrated from the H₂O to the HC phase, and the thermodynamic equilibrium state of DCL shifted towards Dib dissociation. The Dib could be regenerated by HC phase removal. A novel strategy where volatile HC (such as pentane) was used as a trigger was developed to switch the DIS reversibly and its self-assemblies (such as wormlike micelles) in water without inorganic salt accumulation. The SBBA-HA (or SBBA-BA) DIS was a suitable emulsifier for stable emulsions because HA and BA were more soluble in the H₂O phase.

Design of Stimuli-Responsive Dynamic Covalent Delivery Systems for Volatile Compounds (Part 2): Fragrance-Releasing Cleavable Surfactants in Functional Perfumery Applications

Amphiphilic imines prepared by condensation of a hydrophobic fragrance aldehyde with a hydrophilic amine derived from a poly(propylene oxide) and poly(ethylene oxide) diblock copolymer were investigated as cleavable surfactant profragrances in applications of functional perfumery. In water, the cleavable surfactants assemble into micelles that allow solubilization of perfume molecules that are not covalently attached to the surfactant. Dynamic headspace analysis on a glass surface showed that solubilized perfume molecules evaporated in a similar manner in the presence of the cleavable surfactant as compared with a non-cleavable reference surfactant. Under application conditions, the cleavable surfactant imine hydrolysed to release the covalently linked fragrance aldehyde. The profragrances were stable during storage in aqueous media, and upon dilution showed a blooming effect for the hydrolytical fragrance release and a more balanced performance of a solubilized perfume by retaining the more volatile fragrances and boosting the evaporation of the less volatile fragrances.

Design of Stimuli-Responsive Dynamic Covalent Delivery Systems for Volatile Compounds (Part 1): Controlled Hydrolysis of Micellar Amphiphilic Imines in Water

Despite their intrinsic hydrolysable character, imine bonds can become remarkably stable in water when self-assembled in amphiphilic micellar structures. In this work, we systematically studied some of these structures and the influence of various parameters that can be used to take control of their hydrolysis, including pH, concentration, the position of the imine function in the amphiphilic structure, relative lengths of the linked hydrophilic and hydrophobic moieties. Thermodynamic and kinetic data led us to the rational design of stable imines in water, partly based on the location of the imine function within the hydrophobic part of the amphiphile and on a predictable quantitative term that we define as the total hydrophilic-lipophilic balance (HLB). In addition, we show that such stable systems are also stimuli-responsive and therefore, of potential interest in trapping and releasing micellar components on demand.

Enzyme-Responsive Molecular Assemblies Based on Host-Guest Chemistry

Recent years have witnessed a growing interest in the design of enzyme-responsive molecular assemblies that hold appealing applications in the fields of disease-related sensing, imaging, and drug delivery. Cyclodextrins (CDs) are amylase-cleavable host molecules that can associate with surfactants, alkanes, alkyl amines, fatty alcohols, and aromatic compounds to form diverse supramolecular structures. In this work, we report a versatile supramolecular platform to construct enzyme-responsive nanosystems via host-guest interactions, in which complexation between CDs and surfactants eventually leads to the formation of a variety of nanostructures such as vesicles and microtubes. These supramolecular structures are capable of loading water-soluble molecules or functional nanoparticles, which can be actively released on-demand in the presence of α-amylase. This universal strategy to fabricate enzyme-responsive supramolecular systems was further demonstrated with a range of surfactants with anionic, cationic, and nonionic headgroups. Our results highlight a versatile platform for the exploration of biologically responsive self-assembly with potential applications as controlled-release systems and microrobots.

Emergence of Compartments Formed from Unconventional Surfactants in Dynamic Combinatorial Libraries

Assembly processes can drive the selection of self-assembling molecules in dynamic combinatorial libraries, yielding self-synthesizing materials. We now show how such selection in a dynamic combinatorial library made from an amphiphilic building block which, by itself, assembles into micelles, can yield membranous aggregates ranging from vesicles to sponge phases. These aggregates are made from a mixture of unconventional surfactant molecules, showing the power of dynamic combinatorial selection approaches for the discovery of new, not readily predictable, self-assembly motifs.

Chirality transfer based on dynamic covalent chemistry: from small chiral molecules to supramolecules

Chirality transfer from small molecule to supramolecule was successfully achieved via regulation of dynamic covalent chemistry.

pH-Responsive Dipeptide-Based Dynamic Covalent Chemistry Systems Whose Products and Self-Assemblies Depend on the Structure of Isomeric Aromatic Dialdehydes

Facile control over preparation of organic building blocks and self-assembled aggregations to construct the desired materials remains challenges. This article reports selective dynamic covalent bonds formation and the corresponding self-assembly behaviors by using a dipeptide, glycylglycine (GlyGly), reacting with isomeric aromatic dialdehydes o-phthalaldehyde (OPA), p-phthalaldehyde (PPA), and m-phthalaldehyde (MPA) to demonstrate diversified aggregation forms caused by structure topology variations. Under alkaline condition, the aldehyde groups of phthalaldehydes can be connected with the amino groups of GlyGly by imine bonds as the dynamic chemical bonds. Owing to the fact that formation and dissociation of the imine bonds were reversibly pH-responsive, the reactions and aggregates assembled by their products were also reversibly controlled by changing pH. Three products, including two-armed product (OPGG, in which two GlyGly molecules were connected with one OPA molecule), single-armed product (PPG, in which only one GlyGly molecule was connected with a PPA molecule), and a mixture product (MPGG and MPG), as well as their different self-assembly behaviors, were obtained from OPA/GlyGly, PPA/GlyGly, and MPA/GlyGly systems, respectively, at the same condition of pH 8.6 in 90% methanol aqueous solution. However, for OPA/GlyGly system, another different type of product with benzopyrrole structure (OPG) was obtained by nucleophilic substitution via mixing OPA and GlyGly in water, which generated organic nanoparticles. Based on the results above, we conjectured the differences in dynamic covalent bond formation and supramolecular assembly clearly were influenced by the structure topologies of phthalaldehydes (OPA, PPA, and MPA). The experimental phenomenon verified the hypothesis as well, which may guide us to realize facile construction of selective reaction products and intelligent reversibly responsive materials with diverse morphologies and functions.

Smart low molecular weight hydrogels with dynamic covalent skeletons

We report a new strategy for fabricating a smart low molecular weight hydrogel based on dynamic covalent chemistry from a bola-type supra-gelator, which was facilely fabricated in situ from two non-assembling building blocks, (3-(2-(4-formylphenoxy) ethyl)-1-methyl imidazolium bromide, MA) and (3,3'-dithiobis (propionohydrazide), DSPDZ), through dynamic acylhydrazone bonding. The obtained low molecular weight hydrogels exhibited redox-responsive and controllable self-healing properties. The role of dynamic covalent bonding in the formation of smart hydrogels is revealed in this study, which provides a simple and bottom-up method for constructing smart low molecular weight hydrogels.

Coacervation of dynamic covalent surfactants with polyacrylamides: properties and applications

Dynamic covalent surfactants have been prepared from a mixture of 4-formyl-N,N,N-trimethylbenzenaminium iodide (FBA) with heptylamine (C7A) or octylamine (C8A) in alkaline aqueous solutions. The reversible pH-dependent nature of the imine bond is characterized by 1H NMR and fluorescence analysis. The dynamic covalent surfactants self-assemble into micelles under alkaline conditions and exhibit coacervation with 10% hydrolyzed polyacrylamide (PAM) over a wide concentration range. The coacervate phase with a network structure was found to effectively extract the anionic dye Conge Red (CR). When the solution is adjusted to acidity, the imine bond is hydrolyzed, leading to the transition of the coacervates into a homogeneous and clear solution, and the precipitation of CR into purple-black solids due to the protonation of sulfonic groups. Thus, the extraction and release of CR molecules are realized with this dynamic covalent surfactant/PAM system. Moreover the initial components, FBA, amine, and PAM, can be easily regenerated with hydrochloric acid. This method shows potential applications in wastewater treatment.

Governing the DNA-binding mode of styryl dyes by the length of their alkyl substituents – from intercalation to major groove binding

The length of alkyl substituents governs the DNA binding mode of mono- and bis-chromophoric styryl dyes.

Photo-Switchable Self-Assemblies Based on Thymine-Containing Bolaamphiphiles

The photoswitching of photosensitive bolaamphiphiles based on thymine was investigated. Topochemical principles were applied to create light-responsive supra-amphiphiles by the utilisation of dynamic covalent bonds created by the photo-dimerisation of a DNA base, thymine. In order to induce the photo-dimerisation of thymine, two bolaamphiphilic molecules were designed and synthesised to meet the required [2 π+2 π] photo-cycloaddition conditions. The amphiphiles were synthesised with different spacers and their photo-reversibility and morphologies were studied by using UV/Vis, NMR and infrared spectroscopy, rheometry, dynamic light scattering and transmission electron microscopy.

pH Switchable Emulsions Based on Dynamic Covalent Surfactants

Dynamic covalent surfactants were designed to prepare pH switchable emulsions. A dynamic covalent bond between nonamphiphilic building blocks (polyethylenimine (PEI) and benzaldehyde (B)) was introduced to form the dynamic covalent surfactant PEI-B. The dynamic nature of covalent bond in PEI-B was confirmed by ¹H NMR and fluorescence probe analysis. Stable emulsions were successfully prepared with interfacial active PEI-B at pH 7.8 with various water/paraffin oil ratios under sonication. When lowering the pH to 3.5, a complete phase separation was observed as a result of breaking dynamic covalent bond in the interfacial active PEI-B. After tuning the pH back to 7.8, stable emulsion was obtained again due to the reformation of the dynamic covalent bond and hence interfacial active PEI-B. The emulsification and demulsification were dependent on the formation and breaking of dynamic covalent bond in PEI-B. Such pH-triggered emulsification and demulsification can be switched at least three times. Application of dynamic covalent surfactants will open up a novel route for preparing responsive emulsions.

Multicompartment-like aggregates formed by a redox-responsive surfactant encapsulated polyoxometalate in DMF/butanol mixed solvent

Redox-responsive multicompartment-like aggregates formed by a ferrocene-containing surfactant and a Keggin-type polyoxometalate.

β-Cyclodextrin induced hierarchical self-assembly of a cationic surfactant bearing an adamantane end group in aqueous solution

A cationic surfactant with adamantane as the end group, 1-[11-((adamantane-1-carbonyl)oxy)-undecyl]pyridinium bromide (AP), has been synthesized. Its β-cyclodextrin (β-CD) induced hierarchical self-assembling behaviors in aqueous solution were investigated using transmission or scanning electron microscopy methods and small-angle X-ray scattering measurements. Like conventional single chain surfactants, micelles could be formed by AP itself in dilute solutions. However, the dramatic phase transitions of these micelles occurred when host-guest inclusions between AP and β-CD were sequentially produced at different host/guest molar ratios (R), corresponding to the supramolecules with different chemical structures. The AP micelles could be changed into spherical unilamellar vesicles by adding β-CD to reach an R value of 1 : 1. Such vesicles then evolved into multi-wall nanotubes or hydrogels when the β-CD amount was further increased to obtain an R value of 2 : 1. The unique structural characteristics of these supramolecular aggregates come from their "monolayer-like" walls, which have rarely been reported in the past for CD/surfactant inclusion complexes. The interesting results obtained here not only enrich the β-CD/surfactant aggregation systems, but also provide a novel and facile strategy to tune the morphology and structure of aggregates.

Facile Stimuli-Responsive Transformation of Vesicle to Nanofiber to Supramolecular Gel via ω-Amino Acid-Based Dynamic Covalent Chemistry

This paper reports an interesting type of self-assembly systems based on dynamic covalent bonds. The systems are pH-responsible and reversible, which could be utilized for controlling the morphology transformation of the assemblies. In alkaline conditions, the amine group of 11-aminoundecanoic acid (AUA) can connect with the aldehyde group of benzaldehyde (BA) or 1-naphthaledhyde (NA) by dynamic covalent bond to form a small organic building block accompanied by the morphological transformation from vesicles to fibers. When pH is lowered to a neutral value, the dynamic covalent bonds (imine bonds) can be hydrolyzed, leading to the dissociation of fibers and appearance of spherical aggregates. The transformation was confirmed reversible as fibers appeared again when the pH was changed back to alkaline value. In addition, a reversibly controlled gel was designed based on the nanofiber formation. NaCl, which is capable of greatly enhance the nanofiber density and cross-linking, was used to induce the growth of free-standing gel from free-flowing nanofiber system, and the resultant gel was proven to be pH-reversible.

Adaptive soft molecular self-assemblies

Adaptive molecular self-assemblies provide possibility of constructing smart and functional materials in a non-covalent bottom-up manner. Exploiting the intrinsic properties of responsiveness of non-covalent interactions, a great number of fancy self-assemblies have been achieved. In this review, we try to highlight the recent advances in this field. The following contents are focused: (1) environmental adaptiveness, including smart self-assemblies adaptive to pH, temperature, pressure, and moisture; (2) special chemical adaptiveness, including nanostructures adaptive to important chemicals, such as enzymes, CO2, metal ions, redox agents, explosives, biomolecules; (3) field adaptiveness, including self-assembled materials that are capable of adapting to external fields such as magnetic field, electric field, light irradiation, and shear forces.

Electrochemical redox responsive polymeric micelles formed from amphiphilic supramolecular brushes

The end-decorated homopolymer poly(ε-caprolactone)-ferrocene threaded onto a β-cyclodextrin-functionalized main-chain polymer can form a class of amphiphilic noncovalent graft copolymers based on the host-guest interactions of the terminal groups on the side chains. These new supramolecular polymer brushes can further self-assemble into micellar aggregates that exhibit reversible assembly and disassembly behavior under an electrochemical redox trigger, which opens up a new route to building dynamic block copolymer topologies.

Photo-responsive self-assemblies based on bio-inspired DNA-base containing bolaamphiphiles

Photo-responsive thymine incorporated bolaamphiphiles/superamphiphiles that can transfrom the aggregation morphology into spherical structures from ribbon-like structures by UV irradiation were investigated.

Dynamic combinatorial/covalent chemistry: a tool to read, generate and modulate the bioactivity of compounds and compound mixtures

Reversible covalent bond formation under thermodynamic control adds reactivity to self-assembled supramolecular systems, and is therefore an ideal tool to assess complexity of chemical and biological systems. Dynamic combinatorial/covalent chemistry (DCC) has been used to read structural information by selectively assembling receptors with the optimum molecular fit around a given template from a mixture of reversibly reacting building blocks. This technique allows access to efficient sensing devices and the generation of new biomolecules, such as small molecule receptor binders for drug discovery, but also larger biomimetic polymers and macromolecules with particular three-dimensional structural architectures. Adding a kinetic factor to a thermodynamically controlled equilibrium results in dynamic resolution and in self-sorting and self-replicating systems, all of which are of major importance in biological systems. Furthermore, the temporary modification of bioactive compounds by reversible combinatorial/covalent derivatisation allows control of their release and facilitates their transport across amphiphilic self-assembled systems such as artificial membranes or cell walls. The goal of this review is to give a conceptual overview of how the impact of DCC on supramolecular assemblies at different levels can allow us to understand, predict and modulate the complexity of biological systems.

Supra-amphiphiles: a new bridge between colloidal science and supramolecular chemistry

In addition to conventional amphiphiles, an emerging research area is supra-amphiphiles, which are constructed on the basis of noncovalent interactions and dynamic covalent bonds. In this feature article, we have provided a general introduction to the concept, design principles, and topologies of supra-amphiphiles, starting from some rationally tailored building blocks. In addition, we highlight some progress in the functional assembly of supra-amphiphiles, such as responsive nanoscale carriers, antibacterial and antitumor agents, fluorescent-based chemical sensors, and enzyme mimics. The supra-amphiphile is a new bridge between colloidal science and supramolecular chemistry, and it is a field where we can make full use of our imaginative power.

Asymmetric and symmetric bolaform supra-amphiphiles: formation of imine bond influenced by aggregation

A series of bolaform supra-amphilphiles with different symmetries were fabricated through dynamic benzoic imine bond formation. The pH dependence of imine formations of these supra-amphiphiles were characterazied. We found that the extent of the imine formation of these supra-amphiphies were different. The supra-amphiphiles with a poorer symmetry always exhibited a lower imine formation at a given pH. Therefore, the varied extent of imine bond formation indicate the different aggregations of these supra-amphilphiles, which are controlled by the molecular symmetry of the supra-amphiphiles.

Supramolecular glycolipid based on host-enhanced charge transfer interaction

Supramolecular glycolipid has been fabricated based on ternary complex system, which is composed of naphthyl glucosamine (GlcNap), alkyl viologen (RV8), and cucurbit[8]uril (CB[8]). CB[8] plays a key role to connect the other two building blocks together, and the process is driven by host-enhanced charge transfer interaction. Compared with the classic glycolipids, supramolecular glycolipids display redox responsiveness. Supramolecular glycolipids are able to self-assemble in water to form spherical aggregations, such as vesicle like structure. In addition, spherical aggregations can specifically interact with Concanavalin A, indicating that the carbohydrate groups are available on the surfaces of the aggregates.

A new dynamic covalent bond of Se-N: towards controlled self-assembly and disassembly

A new kind of Se-N dynamic covalent bond has been found that can form between the Se atom of a phenylselenyl halogen species and the N atom of a pyridine derivative, such as polystyrene-b-poly(4-vinylpyridine). This Se-N dynamic covalent bond can be reversibly and rapidly formed or cleaved under acidic or basic conditions, respectively. Furthermore, the bond can be dynamically cleaved by heating or treatment with stronger electron-donating pyridine derivatives. The multiple responses of Se-N bond to external stimuli has enriched the existing family of dynamic covalent bonds. It can be used for controlled and reversible self-assembly and disassembly, which may find potential applications in a number of areas, including self-healing materials and responsive assemblies.

H-shaped supra-amphiphiles based on a dynamic covalent bond

The imine bond, a kind of dynamic covalent bond, is used to bind two bolaform amphiphiles together with spacers, yielding H-shaped supra-amphiphiles. Micellar aggregates formed by the self-assembly of the H-shaped supra-amphiphiles are observed. When pH is tuned down from basic to slightly acidic, the benzoic imine bond can be hydrolyzed, leading to the dissociation of H-shaped supra-amphiphiles. Moreover, H-shaped supra-amphiphiles have a lower critical micelle concentration than their building blocks, which is very helpful in enhancing the stability of the benzoic imine bond being hydrolyzed by acid. The surface tension isotherms of the H-shaped supra-amphiphiles with different spacers indicate their twisty conformation at a gas-water interface. The study of H-shaped supra-amphiphiles can enrich the family of amphiphiles, and moreover, the pH-responsiveness may make them apply to controlled or targetable drug delivery in a biological environment.

Enzyme-responsive polymeric supra-amphiphiles formed by the complexation of chitosan and ATP

Chitosan and adenosine-5'-triphosphate (ATP) are employed as building blocks to fabricate polymeric supra-amphiphiles based on electrostatic interactions, which can self-assemble to form spherical aggregates. The spherical aggregates inherit the phosphotase responsiveness of ATP. Compared to our previous work, this enzyme-responsive system can be more biocompatible and block polymers are not needed in preparation, which makes it possible to fabricate the chitosan-based enzyme-responsive assemblies in a large-scale, cheap way. Therefore, the application of the assemblies for nanocontainers and drug delivery is greatly anticipated.

Responsive wormlike micelles from dynamic covalent surfactants

Dynamic covalent chemistry is a powerful tool for the construction of adaptive and stimulus-responsive nanosystems. Here we report on the spontaneous formation of dynamic covalent wormlike micelles from imine-based gemini surfactants, formed upon mixing aqueous solutions of two complementary non-surface-active precursors. Resulting from the reversibility of the dynamic covalent imine bond, the wormlike micelles can be switched between an isotropic solution and the assembled state, triggered by pH and temperature. Thermodynamic modeling of the reaction equilibria shows that, although mixtures of single- and double-tailed surfactants are formed, it is mainly the double-tailed surfactant that assembles into the wormlike micelles.

Self-assembly of supra-amphiphiles based on dual charge-transfer interactions: from nanosheets to nanofibers

With the elaborate engineering of supra-amphiphiles based on dual charge-transfer interactions, the rational design and programmable transformation of well-defined 1D and 2D nanostructures have been demonstrated. First, H-shaped supra-amphiphiles are successfully obtained on the basis of the directional charge-transfer interactions of naphthalene diimide and naphthalene, which self-assemble in water to form 2D nanosheets. Second, by complexation of the H-shaped supra-amphiphiles with pyrene derivatives, the 2D nanosheets transform into ultralong 1D nanofibers. Therefore, this line of research represents a successful example of supramolecular engineering and has enriched its realm.

Amphiphilic building blocks for self-assembly: from amphiphiles to supra-amphiphiles

The process of self-assembly spontaneously creates well-defined structures from various chemical building blocks. Self-assembly can include different levels of complexity: it can be as simple as the dimerization of two small building blocks driven by hydrogen bonding or as complicated as a cell membrane, a remarkable supramolecular architecture created by a bilayer of phospholipids embedded with functional proteins. The study of self-assembly in simple systems provides a fundamental understanding of the driving forces and cooperativity behind these processes. Once the rules are understood, these guidelines can facilitate the research of highly complex self-assembly processes. Among the various components for self-assembly, an amphiphilic molecule, which contains both hydrophilic and hydrophobic parts, forms one of the most powerful building blocks. When amphiphiles are dispersed in water, the hydrophilic component of the amphiphile preferentially interacts with the aqueous phase while the hydrophobic portion tends to reside in the air or in the nonpolar solvent. Therefore, the amphiphiles aggregate to form different molecular assemblies based on the repelling and coordinating forces between the hydrophilic and hydrophobic parts of the component molecules and the surrounding medium. In contrast to conventional amphiphiles, supra-amphiphiles are constructed on the basis of noncovalent interactions or dynamic covalent bonds. In supra-amphiphiles, the functional groups can be attached to the amphiphiles by noncovalent synthesis, greatly speeding their construction. The building blocks for supra-amphiphiles can be either small organic molecules or polymers. Advances in the development of supra-amphiphiles will not only enrich the family of conventional amphiphiles that are based on covalent bonds but will also provide a new kind of building block for the preparation of complex self-assemblies. When polymers are used to construct supra-amphiphiles, the resulting molecules are known as superamphiphiles. This Account will focus on the use of amphiphiles and supra-amphiphiles for self-assembly at different levels of complexity. We introduce strategies for the fabrication of robust assemblies through self-assembly of amphiphiles. We describe the supramolecular approach for the molecular design of amphiphiles through the enhancement of intermolecular interaction among the amphiphiles. In addition, we describe polymerization under mild conditions to stabilize the assemblies formed by self-assembly of amphiphiles. Finally, we highlight self-assembly methods driven by noncovalent interactions or dynamic covalent bonds for the fabrication of supra-amphiphiles with various topologies. Further self-assembly of supra-amphiphiles provides new building blocks for complex structures, and the dynamic nature of the supra-amphiphiles endows the assemblies with stimuli-responsive functions.