Photoreactive azido-containing silica nanoparticle/polycation multilayers: durable superhydrophobic coating on cotton fabrics

Recent progress in surface engineering methods and advanced applications of flexible polymeric foams

Polymeric foams, also known as three-dimensional (3D) polymeric sponges, are lightweight, flexible, compressible, and possess a high surface area compared with other bulk polymers. These sponges have traditionally been used for mattresses or seat cushions in homes, offices, aircraft, automobiles, and trains, and to insulate against heat, electricity, and noise. Recently, the demand for modern materials has expanded the application of polymeric foams to various high-value technologies, including in areas that need high flame retardancy, flame sensors, oil/water separation, metal adsorption, solar steam generation, piezoresistivity, electromagnetic interference shielding, thermal energy storage, catalysis, supercapacitors, batteries, and triboelectric energy harvesting. Proper modification of foams is a prerequisite for their use in high-value applications. Several new strategies for the surface coating of 3D porous foams and novel emerging applications have been recently developed. Therefore, in this review, current advances in the field of surface coating and the application of 3D polymeric foams are discussed. A brief background on 3D polymeric foams, including the unique properties and benefits of polymeric sponges and their routes of synthesis, is presented. Different coating strategies for polymeric sponges are discussed, and their advantages and drawbacks are highlighted. Different advanced applications of polymeric sponges, in conjunction with specific and detailed examples of the above-mentioned applications, are also described. Finally, challenges and potential applications related to the coating of polymeric foams are discussed. We envisage that this review will be useful to facilitate further research, promote continued efforts on the advanced applications mentioned above, and provide new stimuli for the design of novel polymeric sponges for future modern applications.

Fluorine-free nanoparticle coatings on cotton fabric: comparing the UV-protective and hydrophobic capabilities of silica vs. silica-ZnO nanostructures

Robust, hydrophobic woven cotton fabrics were obtained through the sol-gel dip coating of two different nanoparticle (NP) architectures; silica and silica-ZnO. Water repellency values as high as 148° and relatively low tilt angles for fibrous fabrics (12°) were observed, without the need for fluorinated components. In all cases, this enhanced functionality was achieved with the broad retention of water vapor permeability characteristics, i.e., less than 10% decrease. NP formation routes indicated direct bonding interactions in both the silica and silica-ZnO structures. The physico-chemical effects of NP-compatibilizer (i.e., polydimethoxysilane (PDMS) and n-octyltriethoxysilane (OTES) at different ratios) coatings on cotton fibres indicate that compatibilizer-NP interactions are predominantly physical. Whenever photoactive ZnO-containing additives were used, there was a minor decrease in hydrophobic character, but order of magnitude increases in UV-protective capability (i.e., UPF > 384); properties which were absent in non-ZnO-containing samples. Such water repellency and UPF capabilities were stable to both laundering and UV-exposure, resisting the commonly encountered UV-induced wettability transitions associated with photoactive ZnO. These results suggest that ZnO-containing silica NP coatings on cotton can confer both excellent and persistent surface hydrophobicity as well as UV-protective capability, with potential uses in wearables and functional textiles applications.

Applications of the Photocatalytic and Photoacoustic Properties of Gold Nanorods in Contrast-Enhanced Ultrasound and Photoacoustic Imaging

The applications of ultrasound imaging are often limited due to low contrast, which arises from the comparable acoustic impedance of normal tissues and disease sites. To improve the low contrast, we propose a contrast agent called gas-generating laser-activatable nanorods for contrast enhancement (GLANCE), which enhances ultrasound imaging contrast in two ways. First, GLANCE absorbs near-infrared lasers and generates nitrogen gas bubbles through the photocatalytic function of gold nanorods and photolysis of azide compounds. These gas bubbles decrease the acoustic impedance and highlight the injection site from the surrounding tissues. Second, GLANCE exhibits photoacoustic properties owing to the gold nanorods that emit photoacoustic signals upon laser irradiation. Additionally, GLANCE offers several benefits for biomedical applications such as nanometer-scale size, adjustable optical absorption, and biocompatibility. These distinctive features of GLANCE would overcome the limitations of conventional ultrasound imaging and facilitate the accurate diagnosis of various diseases.

Fabricating durable and stable superhydrophobic coatings by the atmospheric pressure plasma polymerisation of hexamethyldisiloxane

The paper was devoted to the results of the study of methods to obtain superhydrophobic film based on the plasma polymerisation of hexamethyldisiloxane (HMDSO) inside the plasma jet at atmospheric pressure. The 3D printing technology was intended for film deposition, which has the advantage of producing superhydrophobic surfaces over a wide range of scales. The effect of synthesis parameters on the hydrophobic properties of the film has been studied. The obtained superhydrophobic films demonstrated stability and resistance in chemical solutions, at high temperatures, under the influence of UV-irradiation and in various weather conditions. The results can be used in various fields, including automotive, construction, electronics, medicine and others, where surface protection against moisture, contamination and corrosion is required.

Recent Advances in Superhydrophobic and Antibacterial Cellulose-Based Fibers and Fabrics: Bio-inspiration, Strategies, and Applications

Cellulose-based fabrics are ubiquitous in our daily lives. They are the preferred choice for bedding materials, active sportswear, and next-to-skin apparels. However, the hydrophilic and polysaccharide characteristics of cellulose materials make them vulnerable to bacterial attack and pathogen infection. The design of antibacterial cellulose fabrics has been a long-term and on-going effort. Fabrication strategies based on the construction of surface micro-/nanostructure, chemical modification, and the application of antibacterial agents have been extensively investigated by many research groups worldwide. This review systematically discusses recent research on super-hydrophobic and antibacterial cellulose fabrics, focusing on morphology construction and surface modification. First, natural surfaces showing liquid-repellent and antibacterial properties are introduced and the mechanisms behind are explained. Then, the strategies for fabricating super-hydrophobic cellulose fabrics are summarized, and the contribution of the liquid-repellent function to reducing the adhesion of live bacteria and removing dead bacteria is elucidated. Representative studies on cellulose fabrics functionalized with super-hydrophobic and antibacterial properties are discussed in detail, and their potential applications are also introduced. Finally, the challenges in achieving super-hydrophobic antibacterial cellulose fabrics are discussed, and the future research direction in this area is proposed.

Graphical Abstract

The figure summarizes the natural surfaces and the main fabrication strategies of superhydrophobic antibacterial cellulose fabrics and their potential applications.

Supplementary Information

The online version contains supplementary material available at 10.1007/s42765-023-00297-1.

Silica-Based Advanced Nanoparticles For Treating Ischemic Disease

Recently, various attempts have been made to apply diverse types of nanoparticles in biotechnology. Silica nanoparticles (SNPs) have been highlighted and studied for their selective accumulation in diseased parts, strong physical and chemical stability, and low cytotoxicity. SNPs, in particular, are very suitable for use in drug delivery and bioimaging, and have been sought as a treatment for ischemic diseases. In addition, mesoporous silica nanoparticles have been confirmed to efficiently deliver various types of drugs owing to their porous structure. Moreover, there have been innovative attempts to treat ischemic diseases using SNPs, which utilize the effects of Si ions on cells to improve cell viability, migration enhancement, and phenotype modulation. Recently, external stimulus-responsive treatments that control the movement of magnetic SNPs using external magnetic fields have been studied. This review addresses several original attempts to treat ischemic diseases using SNPs, including particle synthesis methods, and presents perspectives on future research directions.

Layer-by-Layer Self-Assembly Coating for Multi-Functionalized Fabrics: A Scientometric Analysis in CiteSpace (2005-2021)

Surface-engineered coatings have been increasingly applied to functionalize fabrics due to the ease of deposition of the coatings and their effectiveness in endowing the fabric with abundant properties. Among the surface modification methods, layer-by-layer (LbL) self-assembly has emerged as an important approach for creating multifunctional surfaces on fabrics. In this review, bibliometric analysis with the visualization analysis of LbL self-assembly coatings on fabrics was performed on publications extracted from the Web of Science (WOS) from 2005 to 2021 based on the CiteSpace software. The analysis results showed that research on LbL self-assembly coatings on fabrics has attracted much attention, and this technique has plentiful and flexible applications. Moreover, research on the LbL self-assembly method in the field of functionalization of fabrics has been summarized, which include flame retardant fabric, antibacterial fabric, ultraviolet resistant fabric, hydrophobic fabric and electromagnetic shielding fabric. It was found that the functionalization of the fabric has been changing from singularity to diversification. Based on the review, several future research directions can be proposed. The weatherability, comfort, cost and environmental friendliness should be considered when the multifunctional coatings are designed.

Underwater Drag Reduction and Buoyancy Enhancement on Biomimetic Antiabrasive Superhydrophobic Coatings

A superhydrophobic (SHB) surface with an excellent self-cleaning ability is of great significance in both human survival and industrial fields. However, it is still a challenge to achieve large-area preparation of antiabrasive SHB surfaces with great mechanical robustness for broader applications. Thus, a kind of facile SHB coating with excellent liquid repellency and antiresistance is constructed by spraying a fluorine-free suspension consisting of epoxy resin, hexadecyltrimethoxysilane (HDTMS), and silica nanoparticles on a glass sheet. The SHB coating not only shows high adhesion on various materials but also has high water repellency under various test conditions, including tape peeling after blade scraping, sandpaper abrasion, and immersing in a complex environment. Additionally, the SHB spheres coated with laser-induced microstructure armor could form a continuous gas cavity during the water entry process, which is essential to prolonging the drag reduction ability of SHB coatings in liquid. Finally, the prepared robust SHB coatings have been employed in underwater buoyancy enhancement and reducing fluid resistance, which may open new avenues for underwater drag reduction in the field of marine applications.

Silica-rich regenerated cellulose fibers enabled by delayed dissolution of silica nanoparticles in strong alkali using zinc oxide

Silica nanoparticles (SNPs) dissolve in alkaline media, which limits their use in certain applications. Here, we report a delayed dissolution of SNPs in strong alkali induced by zinc oxide (ZnO), an additive which also limits gelation of alkaline cellulose solutions. This allows incorporating high solid content of silica (30 wt%) in cellulose solutions with retention of their predominant viscous behavior long enough (ca. 180 min) to enable fiber wet spinning. We show that without addition of ZnO, silica dissolves completely, resulting in strong gelation of cellulose solutions that become unsuitable for wet spinning. With an increase of silica concentration, gelation of the solutions occurs faster. Employing ZnO, silica-rich regenerated cellulose fibers were successfully spun, possessing uniform cross sections and smooth surface structure without defects. These findings are useful in advancing the development of functional man-made cellulose fibers with incorporated silica, e.g., fibers with flame retardant or self-cleaning properties.

Porous Layer-by-Layer Films Assembled Using Polyelectrolyte Blend to Control Wetting Properties

Porous layer-by-layer (LbL) films have been employed for the implementation of superwetting surfaces, but they are limited to the LbL films consisting of only two oppositely charged polyelectrolytes. In this study, LbL films were assembled using a cationic polymer blend of branched poly(ethylene imine) (BPEI) and poly(allylamine hydrochloride) (PAH), and anionic poly(acrylic acid); they were then acid-treated at pH 1.8-2.0 to create a porous structure. The films of 100% BPEI exhibited a relatively smooth surface, whereas those of the 100% PAH exhibited porous surfaces. However, various surface morphologies were obtained when BPEI and PAH were blended. When coated with fluorinated silane, films with 50% and 100% PAH exhibited relatively higher water contact angles (WCAs). In particular, films with 50% PAH exhibited the highest WCA of 140-150° when treated at pH 1.8. These fluorinated films were further infused with lubricant oil to determine their feasibility as slippery surfaces. The water and oil sliding angles were in the range of 10-20° and 5-10°, respectively. Films prepared with the BPEI/PAH blend showed lower water slide angles than those prepared with 100% BPEI or PAH. Acid treatment of LbL films assembled using a polyelectrolyte blend can effectively control surface morphologies and can potentially be applied in superwetting.

Robust superhydrophobicity: mechanisms and strategies

Superhydrophobic surfaces hold great prospects for extremely diverse applications owing to their water repellence property. The essential feature of superhydrophobicity is micro-/nano-scopic roughness to reserve a large portion of air under a liquid drop. However, the vulnerability of the delicate surface textures significantly impedes the practical applications of superhydrophobic surfaces. Robust superhydrophobicity is a must to meet the rigorous industrial requirements and standards for commercial products. In recent years, major advancements have been made in elucidating the mechanisms of wetting transitions, design strategies and fabrication techniques of superhydrophobicity. This review will first introduce the mechanisms of wetting transitions, including the thermodynamic stability of the Cassie state and its breakdown conditions. Then we highlight the development, current status and future prospects of robust superhydrophobicity, including characterization, design strategies and fabrication techniques. In particular, design strategies, which are classified into passive resistance and active regeneration for the first time, are proposed and discussed extensively.

Self-Cleaning Polyester Fabric Prepared with TiOF2 and Hexadecyltrimethoxysilane

In this study, self-cleaning polyester (PET) fabrics were prepared using TiOF2 and hexadecyltrimethoxysilane(HDS) treatment. TiOF2 was synthesized via direct fluorination of a precursor TiO2 at various reaction temperatures. The prepared PET fabrics had superior photocatalytic self-cleaning properties compared with anatase TiO2/HDS-treated PET fabrics under UV and sunlight with 98% decomposition of methylene blue. TiOF2/HDS-treated PET fabrics also had superior superhydrophobic self-cleaning properties compared with anatase TiO2/HDS-treated PET fabrics with a 161° water contact angle and 6° roll-off angle. After the self-cleaning tests of the non-dyed TiOF2/HDS-treated PET fabrics, we prepared dyed TiOF2/HDS-treated PET fabrics to test practical aspects of the treatment method. These PET fabrics were barely stained by tomato ketchup; even when stained, they could be self-cleaned within 4 h. These results suggest that practical self-cleaning PET fabrics with superhydrophobicity and photocatalytic degradation could be prepared using TiOF2/HDS-treatment.

Surfactant-free and rinsing-resistant biodegradable nanoparticles with high adsorption on natural fibers for the long-lasting release of fragrances

Synthetic polymers are attracting growing attention as additives for laundry and personal care products. In particular, the high volatility of many common fragrances requires the development of polymeric particles for their encapsulation and controlled release. Unfortunately, the vast majority of these carriers is made from polymers that are not biodegradable. This poses severe concerns about the accumulation of nano- and microplastics. Hence, such particles are expected to be banned from the market in the coming years. Therefore, biodegradable particles enabling a long-lasting release of the fragrances are urgently needed. In this work, we produced biodegradable nanoparticles (NPs) that are structurally composed of lactones, i.e. well known perfumes that occur naturally and that are already considered safe by regulatory agencies. We polymerized these lactones via ring opening polymerization (ROP) using an ionizable tertiary amine as initiator to produce in a single step amphiphilic oligoesters able to directly self-assemble into NPs once nanoprecipitated in water. In this way, we can produce biodegradable NPs with a perfume loading up to 85 % w/w without the need for additional surfactants. Subsequently we show that the ionizable group is able to confer a positive charge to our nanoparticles and, in turn, a high adsorption capacity on natural fibers (i.e. hairs and cotton fabric). Finally, we demonstrate the nanoparticle resistance to rinsing and their ability to confer a long-lasting fragrance perception to treated hair swatches for at least 3 weeks.

Novel porous oil-water separation material with super-hydrophobicity and super-oleophilicity prepared from beeswax, lignin, and cotton

The traditional fluorinated porous material with super-hydrophobicity and super-oleophilicity is an effective strategy for oil-water separation. However, in recent years, fluorinated materials have been classified as "Emerging Environmental Pollutants" by U. S. Environmental Protection Agency because of difficult degradation and bio-accumulation. It is unacceptable to introduce new pollutants while solving environmental disasters. Therefore, it is great requirement to explore a low-cost, environmentally friendly, and renewable technique for the fabrication of novel porous materials with super-hydrophobicity and super-oleophilicity to separate oil-water mixtures. In this work, renewable beeswax, lignin, and cotton have been chosen to prepare the biomass-based porous materials with super-hydrophobicity and super-oleophilicity for oil-water separation. The mixture of beeswax and lignin is modified on the surface of cotton to obtain the biomass-based porous materials with super-hydrophobicity and super-oleophilicity. The beeswax and lignin provide low surface energy and micro/nanoscale structures, respectively. The introduction of lignin effectively improves the thermal stability of the porous materials. The apparent contact angle still remains to be above 150° after a long-time heating. The porous materials effectively separate oil-water mixtures and have good absorption effect for heavy oil (density greater than water). Moreover, the porous materials are easily recyclable after reactivation. This strategy of preparing oil-water separation materials from renewable natural polymers not only helps to clean the environment, but also helps to recover valuable oil.

Self-assembled nanomanipulation of silica nanoparticles enable mechanochemically robust super hydrophobic and oleophilic textile

HYPOTHESIS

Non-wettable fabric surfaces with excellent mechanochemical robustness for practical applications have attracted much attention from researchers in recent years. However, such surfaces suffer from stability issues when exposed to harsh environments because of the weak bonding of the functional materials.

EXPERIMENTS

A unique facile approach is proposed to enhance the adhesion strength and hydrophobicity by improving the hierarchal roughness and opposite charge attraction using alkali and cationized bovine serum albumin (cBSA) respectively. Alkaline etching generated the microroughness and functional groups which facilitated the enhanced adsorption of material on fiber surfaces. The etched fabrics were further treated with cBSA to introduce the positive charged functional groups which enabled the crosslinking of silica nanoparticles with the fiber surfaces through strong electrostatic attraction.

FINDINGS

Benefitting from this novel approach, the improved properties of the samples were confirmed through the water contact angle (WCA), self-cleaning effect, chemical/mechanical stability, and selective absorption of organic solvents. Superhydrophobic fabric with WCA of 171° was fabricated by alkaline etching followed by cationization. Along with the excellent hydrophobicity, superhydrophobic fabric exhibited strong chemical, and mechanical stability and self-cleaning property. The superhydrophobic fabric was utilized for the selective absorption of organic solvents from water because of its superoleophilic characteristics. The significant fabrication strategy and promising performance of superhydrophobic fabrics make these fabrics feasible for large-scale production for various industrial applications i.e. in harsh chemical industries and waste water treatment.

Controlling Structural Transformation of Polyelectrolyte Films for Spatially Encapsulating Functional Species

Although many approaches have been developed to encapsulate functional species into polyelectrolyte films, few of them can effectively control the final distribution of these ones. Herein, a facile strategy is proposed to spatially control the encapsulation of guest species by locally regulating the structural transformation of polyelectrolyte films. Patterned porosity is created within a film by cross-linking it selectively and then immersing it in an acidic solution. These porous regions can exhibit significantly different properties from other regions, including the ability to wick solution, a greater retention of guest species, and the capability of structural transformation. After loading guest species, the porous structures can be eliminated at saturated humidity to encapsulate the guest species into the film, leading to their patterned distribution across the film. Based on this method, various guest species, ranging from fluorescent dyes to nanoparticles, can be locally encapsulated into polyelectrolyte film, forming distinct patterns of arbitrary shapes and sizes and thus paving the way for further applications.

A non-fluorine method for preparing multifunctional robust superhydrophobic coating with applications in photocatalysis, flame retardance, and oil–water separation

A PDMS-grafted method was proposed to fabricate robust PDMS-grafted-Mg(OH)₂/PDMS-grafted-TiO₂@epoxy coatings with multifunctional properties and various promising applications.

Self-Healing Label Materials Based on Photo-Cross-Linkable Polymeric Films with Dynamic Surface Structures

Spatially controlling the evolution of surface structures may provide an effective strategy for patterning surface roughness and facilitating the construction of various functional surfaces. In this study, we report a photo-cross-linkable polymeric film with dynamic surface micro/nanostructures. The surface structures of the un-cross-linked regions can be eliminated under saturated humidity, which can be utilized to create patterned roughness on the film. One potential application of this patternable platform is as a "smart" label material for graphical symbols. Various graphical symbols can be programmed onto this film by partially erasing its surface roughness, enabling visibility due to the difference in light scattering between different areas of the film. When a thus-prepared label was blurred by mechanical scratches, it could be healed under saturated humidity, and its original readability could be fully restored. Furthermore, the patterned rough surface created using our approach can also be very useful in many other research fields, such as surface wettability and cell behavior manipulation.

Covalent layer-by-layer films: chemistry, design, and multidisciplinary applications

Covalent layer-by-layer (LbL) assembly is a powerful method used to construct functional ultrathin films that enables nanoscopic structural precision, componential diversity, and flexible design. Compared with conventional LbL films built using multiple noncovalent interactions, LbL films prepared using covalent crosslinking offer the following distinctive characteristics: (i) enhanced film endurance or rigidity; (ii) improved componential diversity when uncharged species or small molecules are stably built into the films by forming covalent bonds; and (iii) increased structural diversity when covalent crosslinking is employed in componential, spacial, or temporal (labile bonds) selective manners. In this review, we document the chemical methods used to build covalent LbL films as well as the film properties and applications achievable using various film design strategies. We expect to translate the achievement in the discipline of chemistry (film-building methods) into readily available techniques for materials engineers and thus provide diverse functional material design protocols to address the energy, biomedical, and environmental challenges faced by the entire scientific community.

Rational design of materials interface at nanoscale towards intelligent oil-water separation

Oil-water separation is critical for the water treatment of oily wastewater or oil-spill accidents. The oil contamination in water not only induces severe water pollution but also threatens human beings' health and all living species in the ecological system. To address this challenge, different nanoscale fabrication methods have been applied for endowing biomimetic porous materials, which provide a promising solution for oily-water remediation. In this review, we present the state-of-the-art developments in the rational design of materials interface with special wettability for the intelligent separation of immiscible/emulsified oil-water mixtures. A mechanistic understanding of oil-water separation is firstly described, followed by a summary of separation solutions for traditional oil-water mixtures and special oil-water emulsions enabled by self-amplified wettability due to nanostructures. Guided by the basic theory, the rational design of interfaces of various porous materials at nanoscale with special wettability towards superhydrophobicity-superoleophilicity, superhydrophilicity-superoleophobicity, and superhydrophilicity-underwater superoleophobicity is discussed in detail. Although the above nanoscale fabrication strategies are able to address most of the current challenges, intelligent superwetting materials developed to meet special oil-water separation demands and to further promote the separation efficiency are also reviewed for various special application demands. Finally, challenges and future perspectives in the development of more efficient oil-water separation materials and devices by nanoscale control are provided. It is expected that the biomimetic porous materials with nanoscale interface engineering will overcome the current challenges of oil-water emulsion separation, realizing their practical applications in the near future with continuous efforts in this field.

Durable superoleophobic–superhydrophilic fabrics with high anti-oil-fouling property

Although a number of methods have been reported for the preparation of superoleophobic–superhydrophobic surfaces, a challenge still remains in preparing a surface showing simultaneous superoleophobicity and superhydrophilicity. Herein, we demonstrate a novel strategy for preparing a simultaneously superhydrophilic–superoleophobic surface on cotton fabrics. A wet chemical coating method was employed to apply an oligomer which consists of a fluorinated alkyl and a PEG-phosphate hydrophilic moiety, silica nanoparticles and fluoroalkyl silane, onto fabric substrates. The treated fabrics exhibited both superoleophobicity and superhydrophilicity with a contact angle over 150° for oil fluids (surface tension > 27 mN m⁻¹) but 0° for water. Water can spread into the fabric matrix within 2 seconds. The superhydrophilic–superoleophobic fabric had excellent superoleophobicity no matter whether it was at the dry state in air, pre-wetted with water, or in underwater conditions. When being contaminated forcedly with oil or oil-free dirt, the fabric can be easily cleaned up with water without using any detergent and chemical agent. Superoleophobic–superhydrophilic surfaces may provide an alternative and feasible way for anti-fouling applications.

Although a number of methods have been reported for the preparation of superoleophobic–superhydrophobic surfaces, a challenge still remains in preparing a surface showing simultaneous superoleophobicity and superhydrophilicity.

Facile Fabrication and Characterization of a PDMS-Derived Candle Soot Coated Stable Biocompatible Superhydrophobic and Superhemophobic Surface

We report a simple, inexpensive, rapid, and one-step method for the fabrication of a stable and biocompatible superhydrophobic and superhemophobic surface. The proposed surface comprises candle soot particles embedded in a mixture of PDMS+n-hexane serving as the base material. The mechanism responsible for the superhydrophobic behavior of the surface is explained, and the surface is characterized based on its morphology and elemental composition, wetting properties, mechanical and chemical stability, and biocompatibility. The effect of %n-hexane in PDMS, the thickness of the PDMS+n-hexane layer (in terms of spin coating speed) and sooting time on the wetting property of the surface is studied. The proposed surface exhibits nanoscale surface asperities (average roughness of 187 nm), chemical compositions of soot particles, very high water and blood repellency along with excellent mechanical and chemical stability and excellent biocompatibility against blood sample and biological cells. The water contact angle and roll-off angle is measured as 160° ± 1° and 2°, respectively, and the blood contact angle is found to be 154° ± 1°, which indicates that the surface is superhydrophobic and superhemophobic. The proposed superhydrophobic and superhemophobic surface offers significantly improved (>40%) cell viability as compared to glass and PDMS surfaces.

Fabrication of durable superhydrophobic coatings on cotton fabrics with photocatalytic activity by fluorine-free chemical modification for dual-functional water purification

Fluorine-free superhydrophobic coatings on cotton fabrics with photocatalytic activity.

Smart Polymers with Special Wettability

Surface wettability plays a key role in addressing issues ranging from basic life activities to our daily life, and thus being able to control it is an attractive goal. Learning from nature, both of its structure and function, brings us much inspiration in designing smart polymers to tackle this major challenge. Life functions particularly depend on biomolecular recognition-induced interfacial properties from the aqueous phase onto either "soft" cell and tissue or "hard" inorganic bone and tooth surfaces. The driving force is noncovalent weak interactions rather than strong covalent combinations. An overview is provided of the weak interactions that perform vital actions in mediating biological processes, which serve as a basis for elaborating multi-component polymers with special wettabilities. The role of smart polymers from molecular recognitions to macroscopic properties are highlighted. The rationale is that highly selective weak interactions are capable of creating a dynamic synergetic communication in the building components of polymers. Biomolecules could selectively induce conformational transitions of polymer chains, and then drive a switching of physicochemical properties, e.g., roughness, stiffness and compositions, which are an integrated embodiment of macroscopic surface wettabilities.

Fabrication of robust, superhydrophobic, electrically conductive and UV-blocking fabrics via layer-by-layer assembly of carbon nanotubes

Superhydrophobic fabrics with electrical conductivity and UV-blocking property were fabricated via assembly of carbon nanotubes on fibers followed by hydrophobization with poly(dimethylsiloxane).

Controlled Interfacial Permeation, Nanostructure Formation, Catalytic Efficiency, Signal Enhancement Capability, and Cell Spreading by Adjusting Photochemical Cross-Linking Degrees of Layer-by-Layer Films

Interfacial properties including permeation, catalytic efficiency, Raman signal enhancement capabilities, and cell spreading efficiencies are important features that determine material functionality and applications. Here, we propose a facile method to adjust the above-mentioned properties by controlling the cross-linking degrees of multilayer using a photoactive molecule. After treating the cross-linked films in basic solutions, films with different cross-linking degrees presented varying residue thicknesses and film morphologies. As a result, these different films possessed distinct molecular loading and release characteristics. In addition, gold nanoparticles (AuNPs) of different morphological traits were generated by redox reactions coupled with diffusion within these films. The AuNP-polyelectrolyte obtained from the polyelectrolyte films of the medium cross-linking degrees displayed the highest catalytic efficiency and signal enhancement capabilities. Furthermore, cells responded to the variation of film cross-linking degrees, and on the films with the highest cross-linking degree, cells adhered with the highest speed. We expect this report to provide a general interfacial material engineering strategy for material designs.

Recent advances in the mechanical durability of superhydrophobic materials

Large majority of superhydrophobic surfaces have very limited mechanical wear robustness and long-term durability. This problem has restricted their utilization in commercial or industrial applications and resulted in extensive research efforts on improving resistance against various types of wear damage. In this review, advances and developments since 2011 in this field will be covered. As such, we summarize progress on fabrication, design and understanding of mechanically durable superhydrophobic surfaces. This includes an overview of recently published diagnostic techniques for probing and demonstrating tribo-mechanical durability against wear and abrasion as well as other effects such as solid/liquid spray or jet impact and underwater resistance. The review is organized in terms of various types of mechanical wear ranging from substrate adhesion, tangential surface abrasion, and dynamic impact to ultrasonic processing underwater. In each of these categories, we highlight the most successful approaches to produce robust surfaces that can maintain their non-wetting state after the wear or abrasive action. Finally, various recommendations for improvement of mechanical wear durability and its quantitative evaluation are discussed along with potential future directions towards more systematic testing methods which will also be acceptable for industry.

Fabrication of zirconia based durable superhydrophobic–superoleophilic fabrics using non fluorinated materials for oil–water separation and water purification

Fluorine free superhydrophobic coating on cotton fabric by inexpensive dip coating method. The coated fabric exhibited high oil–water separation efficiency.

Self-wrinkling polyelectrolyte multilayers: construction, smoothing and the underlying mechanism

The spontaneous formation of these surface features can be attributed to swelling-induced film deformation during the assembling process.

Transparent superhydrophobic coatings from amphiphilic-fluorinated block copolymers synthesized by aqueous polymerization-induced self-assembly

Preparation of transparent and superhydrophobic coatings by co-deposition of an aqueous solution of an amphiphilic fluorinated block copolymer with silica was developed.

Water-based, heat-assisted preparation of water-repellent cotton fabrics using graft copolymers

A simple, practical, environmentally-friendly method to prepare repellent coated cotton fabrics.

Zirconia based superhydrophobic coatings on cotton fabrics exhibiting excellent durability for versatile use

A fluorinated silyl functionalized zirconia was synthesized by the sol-gel method to fabricate an extremely durable superhydrophobic coating on cotton fabrics by simple immersion technique. The fabric surfaces firmly attached with the coating material through covalent bonding, possessed superhydrophobicity with high water contact angle ≈163 ± 1°, low hysteresis ≈3.5° and superoleophilicity. The coated fabrics were effective to separate oil/water mixture with a considerably high separation efficiency of 98.8 wt% through ordinary filtering. Presence of highly stable (chemically and mechanically) superhydrophobic zirconia bonded with cellulose makes such excellent water repelling ability of the fabrics durable under harsh environment conditions like high temperature, strong acidic or alkaline solutions, different organic solvents and mechanical forces including extensive washings. Moreover, these coated fabrics retained self-cleanable superhydrophobic property as well as high water separation efficiency even after several cycles, launderings and abrasions. Therefore, such robust superhydrophobic ZrO₂ coated fabrics have strong potential for various industrial productions and uses.

Antiwetting Fabric Produced by a Combination of Layer-by-Layer Assembly and Electrophoretic Deposition of Hydrophobic Nanoparticles

This work describes a nanoparticle coating method to produce durable antiwetting polyester fabric. Electrophoretic deposition is used for fast modification of polyester fabric with silica nanoparticles embedded in polymeric networks for high durability coatings. Typically, electrophoretic deposition (EPD) is utilized on electrically conductive substrates due to its dependence on an applied electrical field. EPD on nonconductive materials has been attempted but are limited by weak adhesion, cracks, and other irregularities. To resolve these issues, we coat polyester fabric with thin polymer layers using electrostatic self-assembly (layer-by-layer self-assembly). Next, silica nanoparticles are uniformly dispersed on the polymer layers. Finally, polymerically stabilized silica nanoparticles are deposited by EPD on the fabric, followed by heat treatment. The modified fabric shows high static contact angle and low contact angle hysteresis, while keeping its original color, flexibility, and air permeability. During a skin fiction resistance test, the hydrophobicity of the coating layer was maintained over 500 h. Furthermore, we also show that this approach facilitates patterned regions of wettability by modifying the electric field in EPD.