Amine-functionalized SBA-15 with uniform morphology and well-defined mesostructure for highly sensitive chemosensors to detect formaldehyde vapor

Enhancing Pd Catalytic Activity by Amine Group Modification for Efficient Direct Synthesis of H2O2

A great deal of research has been carried out on the design of Pd-based catalysts in the direct synthesis of H2O2, mainly for the purpose of improving the H2O2 selectivity by weakening the activation energy on the Pd active site and thus inhibiting the dissociation of the O-O bonds in O2*, OOH*, and HOOH*. However, this often results in insufficient activation energy for the reaction between H2 and O2 on Pd, leading to difficulties in improving both the selectivity and productivity of H2O2 simultaneously. Based on this, this study reports an efficient catalyst composed of amine-functionalized SBA-15-supported Pd. The strong metal-support interaction not only makes the PdNPs highly dispersed with more Pd active sites but also improves the stability of the catalyst. The amine group modification increases the proportion of Pd0, further enhancing Pd activity and promoting the adsorption and conversion of H2 and O2 on Pd, thereby significantly increasing H2O2 productivity. Additionally, the density-functional theory simulation results showed that due to the hydrogen-bonding force between the amine group and H2O2, this particular anchoring effect would make the hydrogenation and decomposition of H2O2 effectively suppressed. Ultimately, both the selectivity and productivity of H2O2 are improved simultaneously.

Solution and gaseous phase sensing of formaldehyde with economical triphenylmethane based sensors: a tool to estimate formaldehyde content in stored fish samples

The use of formalin to preserve raw food items such as fish, meat, vegetables etc. is very commonly practiced in the present day. Also, formaldehyde (FA), which is the main constituent of formalin solution, is known to cause serious health issues on exposure. Considering the ill effects of formaldehyde, herein we report synthesis of highly sensitive triphenylmethane based formaldehyde (FA) sensors from a single step reaction of inexpensive reagents namely 4-hydroxy benzaldehyde and 2,6-dimethyl phenol. The synthetic method also provides highly pure product in bulk quantity. The analytical activity of the triphenylmethane sensor 1 with a limit of detection (LOD) value of 2.31 × 10-6 M for FA was significantly enhanced through induced deprotonation and thereafter a LOD value of 1.82 × 10-8 M could be achieved. To the best of our knowledge, the LOD value of the deprotonated form (sensor 2) for FA was superior to those of all the FA optical sensors reported so far. The mechanism of sensing was demonstrated by 1H-NMR titration and recording mass spectra before and after addition of FA to a solution of sensor 2. Both sensor 1 and sensor 2 exhibit quenching in emission upon addition of FA. A fluorescence study also demonstrates enhancement in analytical activity of the sensor upon induced deprotonation. Then the sensor was effectively immobilized into a hydrophilic and biocompatible starch-PVA polymer matrix which enabled detection of FA in a 100% aqueous system reversibly. Again, quick and effective sensing of FA in real food samples (stored fish) with the help of a computational application was demonstrated. The sensors have significant practical applicability as they effectively detect FA in real food samples qualitatively and quantitatively.

Bimetallic Au and Pd Nanoparticles Modified WO3 Nanosheets for Enhancing the Sensitivity and Selectivity of Formaldehyde Assessment in Aquatic Products

Formaldehyde, a common illegal additive in aquatic products, poses a threat to people's health and lives. In this study, a novel metal oxide semiconductor gas sensor based on AuPd-modified WO3 nanosheets (NSs) had been developed for the highly efficient detection of formaldehyde. WO3 NS modified with 2.0% AuPd nanoparticles showed a higher response (Ra/Rg = 94.2) to 50 ppm of formaldehyde at 210 °C, which was 36 times more than the pristine WO3 NS. In addition, the AuPd/WO3 gas sensor had a relatively short response/recovery time of 10 s/9 s for 50 ppm of formaldehyde at 210 °C, with good immunity to other interfering gases and good stability for formaldehyde. The excellent gas-sensitive performance was attributed to the chemical sensitization of Au, the electronic sensitization of Pd, and the synergistic effect of bimetallic AuPd, which facilitated the recognition and response of formaldehyde molecules. Additionally, the high sensitivity and broad application prospect of the 2.0% AuPd/WO3 NS composite-based sensor in real sample detection were also confirmed by using the above sensor for the detection of formaldehyde in aquatic products such as squid and shrimp.

Advances in Heterogeneous Catalysts for Lignin Hydrogenolysis

Lignin is the main component of lignocellulose and the largest source of aromatic substances on the earth. Biofuel and bio-chemicals derived from lignin can reduce the use of petroleum products. Current advances in lignin catalysis conversion have facilitated many of progress, but understanding the principles of catalyst design is critical to moving the field forward. In this review, the factors affecting the catalysts (including the type of active metal, metal particle size, acidity, pore size, the nature of the oxide supports, and the synergistic effect of the metals) are systematically reviewed based on the three most commonly used supports (carbon, oxides, and zeolites) in lignin hydrogenolysis. The catalytic performance (selectivity and yield of products) is evaluated, and the emerging catalytic mechanisms are introduced to better understand the catalyst design guidelines. Finally, based on the progress of existing studies, future directions for catalyst design in the field of lignin depolymerization are proposed.

Mesoporous-Structure MOF-14-Based QCM p-Xylene Gas Sensor

In this work, a facile synthesis method was adopted to synthesize MOF-14 with mesoporous structure. The physical properties of the samples were characterized by PXRD, FESEM, TEM and FT-IR spectrometry. By coating the mesoporous-structure MOF-14 on the surface of a quartz crystal microbalance (QCM), the fabricated gravimetric sensor exhibits high sensitivity to p-toluene vapor even at trace levels. Additionally, the limit of detection (LOD) of the sensor obtained experimentally is lower than 100 ppb, and the theoretical detection limit is 57 ppb. Furthermore, good gas selectivity and fast response (15 s) and recovery (20 s) abilities are also illustrated along with high sensitivity. These sensing data indicate the excellent performance of the fabricated mesoporous-structure MOF-14-based p-xylene QCM sensor. On the basis of temperature-varying experiments, an adsorption enthalpy of -59.88 kJ/mol was obtained, implying the existence of moderate and reversible chemisorption between MOF-14 and p-xylene molecules. This is the crucial factor that endows MOF-14 with exceptional p-xylene-sensing abilities. This work has proved that MOF materials such as MOF-14 are promising in gravimetric-type gas-sensing applications and worthy of future study.

Mesoporous SBA-15 supported gold nanoparticles for solvent-free oxidation of cyclohexane: superior catalytic activity with higher cyclohexanone selectivity

Surface modification of mesoporous SBA-15 with (3-mercaptopropyl) trimethoxysilane greatly enhances its capability to adsorb the tetrachloroauric anion (AuCl₄^-). The calcination of the sample after the adsorption experiment led to the generation of homogeneously dispersed, spherical, single crystalline gold nanoparticles (Au⁰ NPs) of less than 5 nm size, embedded on SBA-15 as observed from the TEM images. The as-prepared SBA-15/Au⁰ nanohybrid material has offered excellent catalytic activity for the selective oxidation of cyclohexane using TBHP as the oxidant in the absence of any solvent. A maximum of 48.7% cyclohexane conversion was achieved and surprisingly, cyclohexanone (K) has much higher selectivity (>95%) than cyclohexanol (A). The hot-filtration study confirmed the leach-resistant characteristics as well as the true heterogeneous catalytic activity of the SBA-15/Au⁰ nanohybrid catalyst. The catalyst was recycled up to four times without significant loss in its catalytic activity.

Molecularly imprinted polymers for sensing gaseous volatile organic compounds: opportunities and challenges

Chemical sensors that can detect volatile organic compounds (VOCs) are the subject of extensive research efforts. Among various sensing technologies, molecularly imprinted polymers (MIPs) are regarded as a highly promising option for their detection with many advantageous properties, e.g., specific binding-site for template molecules, high recognition specificity, ease of preparation, and chemical stability. This review covers recent advances in the sensing application of MIPs toward various types of VOCs (e.g., aliphatic and aromatic compounds). Particular emphasis has been placed on multiple approaches to the synthesis of MIP-based VOC sensors in association with their performance and sensing mechanisms. Current challenges and opportunities for new VOC-sensing applications are also discussed based on MIP technology.

Diagnostic Approaches For COVID-19: Lessons Learned and the Path Forward

Coronavirus disease 2019 (COVID-19) is a transmitted respiratory disease caused by the infection of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Although humankind has experienced several outbreaks of infectious diseases, the COVID-19 pandemic has the highest rate of infection and has had high levels of social and economic repercussions. The current COVID-19 pandemic has highlighted the limitations of existing virological tests, which have failed to be adopted at a rate to properly slow the rapid spread of SARS-CoV-2. Pandemic preparedness has developed as a focus of many governments around the world in the event of a future outbreak. Despite the largely widespread availability of vaccines, the importance of testing has not diminished to monitor the evolution of the virus and the resulting stages of the pandemic. Therefore, developing diagnostic technology that serves as a line of defense has become imperative. In particular, that test should satisfy three criteria to be widely adopted: simplicity, economic feasibility, and accessibility. At the heart of it all, it must enable early diagnosis in the course of infection to reduce spread. However, diagnostic manufacturers need guidance on the optimal characteristics of a virological test to ensure pandemic preparedness and to aid in the effective treatment of viral infections. Nanomaterials are a decisive element in developing COVID-19 diagnostic kits as well as a key contributor to enhance the performance of existing tests. Our objective is to develop a profile of the criteria that should be available in a platform as the target product. In this work, virus detection tests were evaluated from the perspective of the COVID-19 pandemic, and then we generalized the requirements to develop a target product profile for a platform for virus detection.

Potential sensing of toxic chemical warfare agents (CWAs) by twisted nanographenes: A first principle approach

The toxic chemical warfare agents (CWAs) are extremely harmful to the living organisms. Their efficient detection and removal in a limited time span are essential for the human health and environmental security. Twisted nanographenes have great applications in the fields of energy storage and optoelectronics, but their use as sensors is rarely described. Therefore, we have explored the sensitivity and selectivity of twisted nanographene analogues (C₃₂H₁₆, C₆₄H₃₂) towards selected toxic CWAs, including phosgene, thiophosgene and formaldehyde. The interaction between CWAs and twisted nanographenes is mainly interpreted by considering the optimized geometries, adsorption energies, natural bond orbital (NBO), frontier molecular orbital (FMO), non-covalent interaction (NCI) and quantum theory of atoms in molecules (QTAIM) analyses. The structural geometries show that the central octagon of twisted nanographenes is the most favorable site of interaction. The interaction energies reveal the physisorption of selected CWAs on tNGs surface. The average energy gap change (%E_H-L^a) and % sensitivity are quantitatively determined to evaluate the sensing capability of the twisted nanographenes. Among the selected CWAs molecules, the sensitivity of tNG analogues (C₃₂H₁₆ and C₆₄H₃₂) is superior towards thiophosgene (ThP), which is revealed by the high interaction energies of -8.19 and - 12.17 kcal/mol, respectively. This theoretical study will help experimentalists to devise novel sensors based on twisted nanographenes for the detection of toxic CWAs which may also work efficiently under the humid conditions.

Materials Design, Sensing Performance and Mechanism of Anhydrous Hydrogen Fluoride Gas Sensor Based on Amino-Functionalized MIL-101(Cr) for New Energy Vehicles

To guarantee the security of new energy vehicles (NEV), which include energy storage devices such as batteries, a quartz crystal microbalance (QCM) sensor was designed to detect online the HF gas produced from the leakage of electrolyte in the power system. Based on the chemical properties of HF gas, an amino-functionalized metal–organic framework NH2-MIL-101 (Cr) was synthesized as a sensing material of a QCM transducer to detect HF gas for NEV safeguard. The sensing materials are designed based on the hydrogen bond interaction between the amino group and HF molecular and were characterized by powder X-ray diffraction, Brunauer–Emmett–Teller (BET) surface area analysis, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA), etc. The performance of this sensor showed high sensitivity, with a limit of detection at 500 ppb, short response/recovery time and good reproducibility for anhydrous hydrogen fluoride (AHF) detection. Additionally, the sensing mechanism of NH2-MIL-101(Cr) QCM resonator to AHF is revealed to be reversible chemical adsorption by Gaussian 09. It is well-matched with a result of experimental determination through temperature-varying microgravimetric experiments. Therefore, the amino-functionalized MIL-101(Cr) QCM resonator may be a good candidate for an NEV safety monitor due to its rapid response to HF leaked from the decomposition of the electrolyte.

Novel fluorescent self-assembling material with gel properties: ion recognition and energy transfer

A novel fabrication strategy for preparing fluorescent nanomaterials has been proposed based on supramolecular self-assembly complexes and energy transfer. Here a dual acylhydrazone-functionalized molecule (DAF) was designed and synthesized by...

Mesoporous silica incorporated PCL/Curcumin nanofiber for wound healing application

Electrospinning, a recent fast-emerging technique highly applicable in the production of nanofibers has gained vast recognition owing to its explicit applications in various domains. Amongst which, the production of nanoscaffolds for wound healing applications has been focused recently due to advantages over conventional wound healing methods. In the present research, a composite nanoscaffold comprising SBA-15 (Santa Barbara Amorphous), amine functionalized SBA-15 polycaprolactone (PCL) and curcumin was investigated for its potentiality in wound healing therapeutics. The high biocompatibility and cell adhesion of amine functionalized SBA-15 and the widely explored antimicrobial properties of curcumin added benefit for the wound healing target. The prepared highly interconnected electrospun fibers with porous structure were characterized through various studies such as FTIR, XRD, SEM and EDAX. Further, antibacterial studies against both Gram positive (Bacillus subtilis) and Gram negative (Escherichia coli) strains revealed an improved zone of inhibition. Major invitro studies such as cell migration, proliferation, bio-compatibility was experimented through cell adhesion and live and dead assay using Swiss 3T6 cell lines. In vivo studies on female Wister rats using the fabricated nanofibers incorporated with curcumin and amine functionalized SBA-15 showed 99% scar-less wound healing within 21 days. Re-epithelization of tissue, collagen deposition and formation of granulation tissue were observed from the results of Hematoxylin-Eosin and Masson's tri-chrome staining. From the observations, it can be concluded that the fabricated nanoscaffold could be an effective substrate for wound healing therapeutics.

Luminescence turn-on response of naphthalene diimide based chemosensor with Formaldehyde: A novel stratagem for estimation of formaldehyde in storage fish samples

A new strategy has been developed for selective estimation of toxic Formaldehyde (FA) in storage fish samples by a simple chemosensor (BNDI) based on naphthalene diimide core in aqueous medium at neutral pH. The rapid "lightning-up" fluorescence feature of BNDI has been implied to detect and estimate aqueous FA selectively at very low concentration. The chemosensing properties of BNDI with aqueous FA have been established through a unique interaction pattern which is proven by different spectroscopic and theoretical analysis.

Based on Gold Nanoparticles-L-Tyr-Amino Functionalized Mesoporous Materials-Polyphenol Oxidase Modified Biosensor for the Detection of Resorcinol

Nowadays, resorcinol (RC) has been widely applied in the chemical and pharmaceutical industries. However, the electrochemical detection technique of RC still features some significant drawbacks, for instance, a low sensitivity. Hence, in the present work, a glass carbon electrode was developed for the electrochemical detection of RC with good specificity and stability, through modifying the glass carbon electrode (GCE) by polyphenol oxidase (PPO), an NH₂-SBA-15 mesoporous material (NH₂-SBA-15), L-tyrosine (L-Tyr) and gold nano-particles (AuNPs). After being successively modified by AuNPs, L-Tyr, NH₂-SBA-15 and PPO, the constructed PPO/NH₂-SBA-15/L-Tyr/AuNPs/GCE was used to discriminate RC from ions and other common micromolecules, which showed a fairly good specificity and stability. The proposed electrochemical detection method features a linear range of from 0.5 to 21.0 μM with a LOD down to 0.15 μM, revealing a better sensitivity than the existing methods. It is worth mentioning that the proposed PPO/NH₂-SBA-15/L-Tyr/AuNPs/GCE has been successfully used as an electrochemical probe for the RC assay in domestic sewage.

Sensitive Formaldehyde Detection with QCM Sensor Based on PAAm/MWCNTs and PVAm/MWCNTs

Two formaldehyde detection methods are proposed by applying composite film quartz crystal microbalance (QCM) sensors. QCM sensor coated with PAAm/MWCNTs and PVAm/MWCNTs shows excellent characteristics of lower limit and high sensitivity. The lower limit of PVAm/MWCNTs is 0.5 ppm, and its detection sensitivity is 0.74 ppm/Hz. Upon working at different concentrations of formaldehyde and fabricating in different proportions, the reuse performance, gas selectivity, and response at room temperature show contrasting results. The main advantages of the two sensors presented are fast reaction, low cost, and easy manufacture. Compared to other formaldehyde sensors based on QCM, the PAAm/MWCNT- and PVAm/MWCNT-coated QCM sensors are able to concurrently show excellent selectivity, reuse performance, and high sensitivity, which is of great significance to detect the environmental quality.

A reusable test paper based on a simple salicylaldehyde derivate for the real-time detection of phosgene in gas phase

Phosgene is an important organic activity intermediate as well as a poisonous gas. However, the widespread use and abuse of phosphene brings potential risks to public safety. So it is very important to detect phosgene quickly and reliably. Up to now, a lot of chemical sensors based on organoluminescent groups have been reported to monitor phosgene. However, most of them have complex molecular structures and cannot be recycled during detection. Herein, we developed a simple and effective fluorescent chemosensor using 5-chlorsalicylaldehyde as luminophor and azanol as recognition site. It exhibited significant fluorescence enhancement, excellent specificity and sensitivity. More importantly, the reusable test paper prepared by this chemosensor has been successfully used in the point-of-care testing of gaseous phosgene.

Recent advances in selective formaldehyde detection in biological and environmental samples by fluorometric and colorimetric chemodosimeters

Formaldehyde, a highly reactive carbonyl species, has been widely used in day-to-day life owing to its numerous applications in essential commodities, etc.; the extrusion of formaldehyde from these sources basically leads to increased formaldehyde levels in the environment. Additionally, formaldehyde is endogenously produced in the human body via several biological processes. Considering the adverse effects of formaldehyde, it is highly important to develop an efficient and reliable method for monitoring formaldehyde in environmental and biological samples. Several chemodosimeters (reaction-based sensing probes) have been designed and synthesized to selectively detect the presence of formaldehyde utilizing the photophysical properties of molecules. In this review, we have comprehensively discussed the recent advances in the design principles and sensing mechanisms of developed probes and their biological/environmental applications in selective formaldehyde detection and imaging endogenous formaldehyde in cells. We have summarized the literature based on three different categories: (i) the Schiff base reaction, (ii) the 2-aza-Cope sigmatropic rearrangement reaction and (iii) miscellaneous approaches. In all cases, reactions are accompanied by changes in color and/or emission that can be detected by the naked eye.

Recent Advances in Fluorescence Light-Up Endogenous and Exogenous Carbon Monoxide Detection in Biology

Considerable attention has been paid by the scientific community to detect toxic carbon monoxide (CO) in sub-cellular organelles like mitochondria, lysosomes, nuclei, etc. due to their generation and accumulation through numerous biological processes and their role as signal transducer, therapeutics, etc. Various methods are also available for detection of CO, but fluorescence light-up detection is considered the best due to its easy and accurate sensing capability. As of now, no review is available in the literature dedicated to fluorescent detection of only CO both in vitro and in vivo, but considering the huge amount of work reporting every year, it is necessary to have an account of all the recent significant works devoted to it. This review will give special attention to the most noteworthy development of fluorescent light-up probes for the detection of cellular and sub-cellular targetable CO starting from 2012 and emphasizing also the mechanism of action and the applications.

Facile ultrasound-assisted grafting of silica gel by aminopropyltriethoxysilane for aldol condensation of furfural and acetone

This work focuses on the development of a simple method to prepare heterogeneous catalysts with tunable basicity and stability for aldol condensation of furfural and acetone. Silica gel was grafted by aminopropyltriethoxysilane (APTES) with 20, 30, 40 and 50 wt. % of APTES using probe-type ultrasonicator with a power of 130 W and a frequency of 20 kHz. The grafted samples were studied by XRD, SEM, N₂ sorption, FTIR, XPS, CHN and TG analysis, and CO₂-TPD. The sonication facilitated the bond formation between APTES and the silica gel with less pore blocking than the conventional grafting method. The basicity of the samples was tunable with the quantity of APTES loading. The grafted samples were active catalysts for aldol condensation between furfural and acetone at 60 °C. The catalyst with 30 wt. % APTES grafting (30APS-U) provided a nearly complete furfural conversion and high furfurylbutenone selectivity. The conversion and selectivity increased with time and reached the highest values at 24 h. Thus, the catalysts with tunable basicity prepared by ultrasound-assisted grafting of silica with various APTES amounts were effective in furfural valorization.

Design and fabrication of electrospun SBA-15-incorporated PVA with curcumin: a biomimetic nanoscaffold for skin tissue engineering

Fabricating and designing a scaffold is a complex and highly challenging process in the current scenario. The present study deals with the design and fabrication of electrospun Santa Barbara Amorphous (SBA)-15-incorporated polyvinyl alcohol (PVA) with curcumin, which can be used as a biomimetic nanoscaffold for skin tissue engineering. Curcumin was selected due to its effective anti-microbial and anti-inflammatory properties. SBA-15 was selected for its characteristic drug-carrying potential. Fourier transform infrared spectroscopy and x-ray diffraction characterizations of the fabricated nanofiber demonstrated the interaction of PVA, SBA-15 and curcumin. The scanning electron microscopy results depicted that the nanofiber was highly interconnected with a porous structure mimicking the extracellular matrix. The nanofibrous scaffold showed a higher percentage of cell migration, proliferation, cytocompatibility and biocompatibility with absence of cytotoxicity which was evidenced from the results of MTT assay, cell adhesion and live/dead assay using HaCaT cells. The results of the anti-bacterial test depicted that the synthesized nanofiber forms a potent material for skin wound-healing therapeutics. The in vitro drug release study performed over a period of 80 h revealed a sustained release pattern of curcumin from the SBA-15-incorporated PVA nanofiber. Finally, the in vivo results confirmed that SBA-15-incorporated PVA nanofiber with curcumin showed efficient wound-healing activities.

Aldehydes as Wort Off-Flavours in Alcohol-Free Beers—Origin and Control

Although present in concentrations in microgrammes per litre level, aldehydes, in particular those derived from Strecker degradation, are known to majorly contribute to the undesired wort flavour of alcohol-free beers. In order to improve currently available products, one needs to understand the underlying cause for the over-prevalence and identify leverage points and methods to selectively reduce the aldehydes in alcohol-free beers. This work gives a short overview on relevant flavour-active wort flavours identified in alcohol-free beer and on their involved chemical formation pathways. Consequently, aldehyde removal technologies in general and in brewing industry are presented. Adsorptive removal of off-flavours by aldehyde-scavenging groups is already widely exploited in the packaging industry and may achieve reduction of these components to near depletion, depending on the process conditions. Its principles are adaptable to recovering off-flavours before filling. Also, supercritical CO2 extraction has been successfully applied to separate flavours from food matrices. In brewing, the focus has been set to biologic conversion by restricted fermentation steps, but the reduction of key components of more than 70% is not achieved. Newer developments focus on thermal separation techniques that not only include non-specific physical dealcoholisation but also more selective technologies such as pervaporation, where aldehydes are reduced to near depletion. However, for most unit operations, selectivity and capacity are not yet investigated. Future research should explore the shortcomings of current techniques and overcome bottlenecks either by developing more specific methods for aldehyde removal and/or a clever combination of unit operations to optimise the separation and process integration.

Growth and Functionalization of Particle-Based Mesoporous Silica Films and Their Usage in Catalysis

We report the formation of mesoporous films consisting of SBA-15 particles grown directly onto substrates and their usage as catalysts in esterification of acetic acid and ethanol. The film thickness was altered between 80 nm and 750 nm by adding NH₄F to the synthesis solution. The salt also affects the formation rate of the particles, and substrates must be added during the formation of the siliceous network in the solution. Various substrate functionalizations were tested and hydrophobic substrates are required for a successful film growth. We show that large surfaces (> 75 cm²), as well as 3D substrates, can be homogenously coated. Further, the films were functionalized, either with acetic acid through co-condensation, or by coating the films with a thin carbon layer through exposure to furfuryl alcohol fumes followed by carbonization and sulfonation with H₂SO₄. The carbon-coated film was shown to be an efficient catalyst in the esterification reaction with acetic acid and ethanol. Due to the short, accessible mesopores, chemical variability, and possibility to homogenously cover large, rough surfaces. the films have a large potential for usage in various applications such as catalysis, sensing, and drug delivery.

An imidazole derivative-based chemodosimeter for Zn2+ and Cu2+ ions through “ON–OFF–ON” switching with intracellular Zn2+ detection

Imidazole derivative-based chemodosimeter (HL) for selective detection of Zn²⁺ and Cu²⁺ metal ions and intracellular Zn²⁺ sensing.

Responsive Photonic Hydrogel-Based Colorimetric Sensors for Detection of Aldehydes in Aqueous Solution

In this work, we present a fast and efficient strategy for the preparation of responsive photonic hydrogels for aldehyde sensing by combining the self-assembly of monodisperse carbon-encapsulated Fe₃O₄ nanoparticles (NPs) and in situ photopolymerization of polyacrylamide (PAM) hydrogels. The responsive photonic hydrogels exhibit structural color variation after being treated with formaldehyde aqueous solution, which can be attributed to the chemical reaction between the amide groups in the hydrogels and the formaldehyde. We have also shown that the photonic hydrogels can be used to determine the concentration of formaldehyde and to differentiate aldehydes through a facile reflection spectra shift and color change. This study provides a facile strategy for the visualized determination of aldehyde in aqueous solution.

Visible Light-Induced Metal Free Surface Initiated Atom Transfer Radical Polymerization of Methyl Methacrylate on SBA-15

Surface-initiated atom transfer radical polymerization (SI-ATRP) is one of the most versatile techniques to modify the surface properties of materials. Recent developed metal-free SI-ATRP makes such techniques more widely applicable. Herein photo-induced metal-free SI-ATRP of methacrylates, such as methyl methacrylate, N-isopropanyl acrylamide, and N,N-dimethylaminoethyl methacrylate, on the surface of SBA-15 was reported to fabricate organic-inorganic hybrid materials. A SBA-15-based polymeric composite with an adjustable graft ratio was obtained. The structure evolution during the SI-ATRP modification of SBA-15 was monitored and verified by FT-IR, XPS, TGA, BET, and TEM. The obtained polymeric composite showed enhanced adsorption ability for the model compound toluene in aqueous conditions. This procedure provides a low-cost, readily available, and easy modification method to synthesize polymeric composites without the contamination of metal.

Catalytic depolymerization of the hydrolyzed lignin over mesoporous catalysts

In this work, the mesoporous SBA-15 and a series of modified catalysts based on it, such as Al-SBA-15 and Ni/Al-SBA-15, were synthesized and used for eliminating the char formation during the depolymerization of hydrolyzed lignin. The temperature, time and solvent effects on the lignin depolymerization were also investigated. Results showed that the repolymerization was effectively suppressed over SBA-15 due to its well-ordered pore structure and large pore size. The addition of Al and Ni elements in SBA-15 could improve the lignin depolymerization performance and saturate the instable intermediates. Ethanol was found to be more effective in suppressing repolymerization than other solvents. 81.4% liquefaction degree and 21.90wt% monomer yield was achieved, and no obvious char was observed after the depolymerization of hydrolyzed lignin in ethanol solvent at 300°C for 4h over Ni/Al-SBA-15(20) catalyst.

Fluorescent probes and materials for detecting formaldehyde: from laboratory to indoor for environmental and health monitoring

Formaldehyde (FA), as a vital industrial chemical, is widely used in building materials and numerous living products.

Chromogenic Detection of Aqueous Formaldehyde Using Functionalized Silica Nanoparticles

Silica nanoparticles functionalized with thiol reactive units and bulky polar polyamines were used for the selective colorimetric detection of formaldehyde. The reaction of thiols groups in the nanoparticles surface with a squaraine dye resulted in loss of the π-conjugation of the chromophores, and the subsequent bleaching of the solution. However, when formaldehyde was present in the suspension, the thiol-squaraine reaction was inhibited and a chromogenic response was observed. A selective response to formaldehyde was observed only when the thiol and polyamine groups were anchored to the silica surface. The observed selective response was ascribed to the fact that bulky polyamines generate a highly polar environment around thiols, which were only able to react with the small and polar formaldehyde, but not with other aldehydes. The sensing nanoparticles showed a limit of detection (LOD) for formaldehyde of 36 ppb in water.

Copper-loaded hypercrosslinked polymer decorated with pendant amine groups: a green and retrievable catalytic system for quick [3 + 2] Huisgen cycloaddition in water

A novel heterogeneous copper catalyst based on a 3D-network polymer containing pendant amine groups was synthesized via post-functionalization of the polymeric backbone followed by incorporation of copper(i) ions.

Diamine-appended metal–organic frameworks: enhanced formaldehyde-vapor adsorption capacity, superior recyclability and water resistibility

This study presents a convenient modification of the well-known MOF, MIL-101, with ethylenediamine (ED) on its open-metal sites to substantially improve the HCHO adsorption properties.

Efficient removal of gaseous formaldehyde in air using hierarchical titanate nanospheres with in situ amine functionalization

Amine-grafted titanate nanospheres are fabricated as efficient and recyclable adsorbents for formaldehyde removal.

Fabrication and Formaldehyde-Sensing Property of Quartz Crystal Microbalance (QCM) Coated with PVP-MWCNTs Composites

In this paper, the quartz crystal microbalance (QCM) sensors coated with polyvinyl pyrrolidone (PVP)-multiwalled carbon nanotubes (MCWNTs) nanocomposite thin films were developed by the spray process, which were used for the detection of low concentration formaldehyde at room temperature. The surface morphology and structure of films was analyzed by scanning electron microscope (SEM), UV-Vis absorption spectrometry, respectively, and the formaldehyde-sensing properties of sensors were investigated. The results showed that the prepared QCM gas sensor exhibited the linear characteristic, fast response, good reproducibility to low concentration formaldehyde within 6 ppm, and the poisoning of films was observed when the formaldehyde concentration exceeded 6ppm. Moreover, the sensitivity of the sensor could achieve up to 1Hz/ppm and had the good stability of response values.

Sensing Properties of GO and Amine-Silica Nanoparticles Functionalized QCM Sensors for Detection of Formaldehyde

In the current work, graphene oxides (GO) and Amine-Functionalized Silica Nanoparticles ( NH 2-SNs) were used as sensing layer on quart crystal microbalance (QCM) for detection of HCHO gas. The GO and NH 2-SNs functionalized QCM resonators all had a significant response to HCHO gas. The sensitivity of GO functionalized QCM resonator is 0.04 Hz/(μg⋅ppm), which is four times as high as that of NH 2-SNs functionalized QCM resonator (0.01 Hz/(μg⋅ppm)). The GO functionalized QCM resonators would be of benefit in area of environmental applications.

Layer-by-layer assembly of low-temperature-imprinted poly(methacrylic acid)/gold nanoparticle hybrids for gaseous formaldehyde mass sensing

New gas-sensing materials capable of selectively detecting sub-ppm levels of formaldehyde with fast response and recovery kinetics are designed by layer-by-layer assembly of imprinted polymer and Au nanoparticles.