Photodegradable polyurethane self-assembled nanoparticles for photocontrollable release

Visible Light Degradable Acridine-Containing Polyurethanes in an Aqueous Environment

Light degradable polymers hold significant promise in a wide range of applications including the fabrication of optically recyclable materials, responsive coatings and adhesives, and controlled drug delivery. Here, we report the synthesis of polyurethanes that can be degraded under irradiation of visible light (≤450 nm) from commercial LED (3-15 W) light sources. The photolysis occurs in an aqueous environment via photocleavage of an acridine moiety incorporated within the backbone of the polymer chains. Analysis of the quantum yield as a function of wavelength reveals highly efficient photoreactivity at up to 440 nm activation, which is red-shifted compared to the UV-vis absorbance of the chromophore. The potential of our chemical system in biomaterials is demonstrated by the fabrication of an in situ forming hydrogel that can be degraded by visible light.

Advanced Skin Antisepsis: Application of UVA-Cleavable Hydroxyethyl Starch Nanocapsules for Improved Eradication of Hair Follicle-Associated Microorganisms

Hair follicles constitute important drug delivery targets for skin antisepsis since they contain ≈25% of the skin microbiome. Nanoparticles are known to penetrate deeply into hair follicles. By massaging the skin, the follicular penetration process is enhanced based on a ratchet effect. Subsequently, an intrafollicular drug release can be initiated by various trigger mechanisms. Here, we present novel ultraviolet A (UVA)-responsive nanocapsules (NCs) with a size between 400 and 600 nm containing hydroxyethyl starch (HES) functionalized by an o-nitrobenzyl linker. A phase transfer into phosphate-buffered saline (PBS) and ethanol was carried out, during which an aggregation of the particles was observed by means of dynamic light scattering (DLS). The highest stabilization for the target medium ethanol as well as UVA-dependent release of ethanol from the HES-NCs was achieved by adding 0.1% betaine monohydrate. Furthermore, sufficient cytocompatibility of the HES-NCs was demonstrated. On ex vivo porcine ear skin, a strong UVA-induced release of the model drug sulforhodamine 101 (SR101) could be demonstrated after application of the NCs in cyclohexane using laser scanning microscopy. In a final experiment, a microbial reduction comparable to that of an ethanol control was demonstrated on ex vivo porcine ear skin using a novel UVA-LED lamp for triggering the release of ethanol from HES-NCs. Our study provides first indications that an advanced skin antisepsis based on the eradication of intrafollicular microorganisms could be achieved by the topical application of UVA-responsive NCs.

Lyotropic Liquid Crystals: A Biocompatible and Safe Material for Local Cardiac Application

The regeneration of cardiac tissue is a multidisciplinary research field aiming to improve the health condition of the post-heart attack patient. Indeed, myocardial tissue has a poor ability to self-regenerate after severe damage. The scientific efforts focused on the research of a biomaterial able to adapt to heart tissue, thus guaranteeing the in situ release of active substances or growth promoters. Many types of hydrogels were proposed for this purpose, showing several limitations. The aim of this study was to suggest a new usage for glyceryl monooleate-based lyotropic liquid crystals (LLCs) as a biocompatible and inert material for a myocardial application. The main advantages of LLCs are mainly related to their easy in situ injection as lamellar phase and their instant in situ transition in the cubic phase. In vivo studies proved the biocompatibility and the inertia of LLCs after their application on the myocardial tissue of mice. In detail, the cardiac activity was monitored through 28 days, and no significant alterations were recorded in the heart anatomy and functionality. Moreover, gross anatomy showed the ability of LLCs to be bio-degraded in a suitable time frame. Overall, these results permitted us to suppose a potential use of LLCs as materials for cardiac drug delivery.

Recent Advances in Stimuli-Responsive Commodity Polymers

Known for their adaptability to surroundings, capability of transport control of molecules, or the ability of converting one type of energy to another as a result of external or internal stimuli, responsive polymers play a significant role in advancing scientific discoveries that may lead to an array of diverge applications. This review outlines recent advances in the developments of selected commodity polymers equipped with stimuli-responsiveness to temperature, pH, ionic strength, enzyme or glucose levels, carbon dioxide, water, redox agents, electromagnetic radiation, or electric and magnetic fields. Utilized diverse applications ranging from drug delivery to biosensing, dynamic structural components to color-changing coatings, this review focuses on commodity acrylics, epoxies, esters, carbonates, urethanes, and siloxane-based polymers containing responsive elements built into their architecture. In the context of stimuli-responsive chemistries, current technological advances as well as a critical outline of future opportunities and applications are also tackled.

Release of the model drug SR101 from polyurethane nanocapsules in porcine hair follicles triggered by LED-derived low dose UVA light

Hair follicles (HFs) are important drug delivery targets for the therapy of miscellaneous skin diseases and for skin antisepsis. Furthermore, HFs significantly contribute to drug delivery of topically applied substances. Nanoparticulate systems are excellently suited for follicular drug delivery as they entail the opportunity of directed drug transport into HFs. Moreover, they involve the possibility of an intrafollicular drug release initiated by extrinsic or intrinsic trigger mechanisms. In this study, we present a novel preclinical model for an anatomically and temporally targeted intrafollicular drug release. In vitro release kinetics of the model drug sulforhodamine 101 (SR101) from newly synthesized ultraviolet A (UVA)-responsive polyurethane nanocapsules (NCs) were investigated by fluorescence spectroscopy. Low power density UVA radiation provided by a UVA light emitting diode (LED) induced a drug release of over 50% after 2 min. We further utilized confocal laser scanning microscopy (CLSM) to investigate follicular penetration as well as intrafollicular drug release on an ex vivo porcine ear skin model. UVA-responsive degradation of the NCs at a mean follicular penetration depth of 509 ± 104 µm ensured liberation of SR101 in the right place and at the right time. Thus, for the first time a UVA-triggered drug release from NCs within HFs was demonstrated in the present study. Cytotoxicity tests revealed that NCs synthesized with isophorone diisocyanate show sufficient biocompatibility after UVA-induced cleavage. A considerable and controllable release of various water-soluble therapeutics could be reached by means of the presented system without risking any radiation-related tissue damage. Therefore, the implementation of the presented system into clinical routine, e.g. for preoperative antisepsis of HFs, appears very promising.

Stimuli-responsive polymeric nanomaterials for rheumatoid arthritis therapy

Rheumatoid arthritis (RA) is a long-term inflammatory disease derived from an autoimmune disorder of the synovial membrane. Current therapeutic strategies for RA mainly aim to hamper the macrophages' proliferation and reduce the production of pro-inflammatory cytokines. Therefore, the accumulation of therapeutic agents targeted at the inflammatory site should be a crucial therapeutic strategy. Nowadays, the nanocarrier system incorporated with stimuli-responsive property is being intensively studied, showing the potentially tremendous value of specific therapy. Stimuli-responsive (i.e., pH, temperature, light, redox, and enzyme) polymeric nanomaterials, as an important component of nanoparticulate carriers, have been intensively developed for various diseases treatment. A survey of the literature suggests that the use of targeted nanocarriers to deliver therapeutic agents (nanotherapeutics) in the treatment of inflammatory arthritis remains largely unexplored. The lack of suitable stimuli-sensitive polymeric nanomaterials is one of the limitations. Herein, we provide an overview of drug delivery systems prepared from commonly used stimuli-sensitive polymeric nanomaterials and some inorganic agents that have potential in the treatment of RA. The current situation and challenges are also discussed to stimulate a novel thinking about the development of nanomedicine.

Construction from destruction using a photo-triggered self-propagating degradable polyurethane as a one-pot epoxy

We report a photo-triggered, base generating, base propagating degradable polyurethane that is triggered by 365 nm UV light irradiation.

Adsorption of Nile Red Self-Assembled Monolayers on Au(111)

The ability of Nile Red to self-assemble into supramolecular packings on Au(111) was studied using scanning tunneling microscopy and modeled through theoretical semiempirical calculations. At both submonolayer (sub-ML) and ML coverages, two distinct molecular packings, that is, four-leaf clover and dense chain, were observed, both weakly interacting with the underlying metal surface. Theoretical calculations suggested that the dipole moment plays a subtle role in both molecular assemblies, held together by hydrogen bonds between the Nile Red molecules. Furthermore, although both molecular assemblies were observed in as-deposited samples, a mild thermal annealing caused the transition from the four-leaf clover to the dense-chain packing, pointing out the greater stability of the dense-chain configuration. The study further emphasized how the established interactions between the Nile Red molecules are strongly influenced by the surrounding environment.

Nanomaterials multifunctional behavior for enlightened cancer therapeutics

Cancer is an outrageous disease with uncontrolled differentiation, growth, and migration to the other parts of the body. It is the second-most common cause of death both in the U.S. and worldwide. Current conventional therapies, though much improved and with better prognosis, have several limitations. Chemotherapeutic agents, for instance, are cytotoxic to both tumor and healthy cells, and the non-specific distribution of drugs at tumor sites limits the dose administered. Nanotechnology, which evolved from the coalescence and union of varied scientific disciplines, is a novel science that has been the focus of much research. This technology is generating more effective cancer therapies to overcome biomedical and biophysical barriers against standard interventions in the body; its unique magnetic, electrical, and structural properties make it a promising tool. This article reviews endogenous- and exogenous-based stimulus-responsive drug delivery systems designed to overcome the limitations of conventional therapies. The article also summarizes the study of nanomaterials, including polymeric, gold, silver, magnetic, and quantum dot nanoparticles. Though an array of drug delivery systems has so far been proposed, there remain many challenges and concerns that should be addressed in order to fill the gaps in the field. Prominence is given to drug delivery systems that employ external- and internal-based stimuli and that are emerging as promising tools for cancer therapeutics in clinical settings.

The effect of low- and high-penetration light on localized cancer therapy

The design of a delivery system allowing targeted and controlled drug release has been considered one of the main strategies used to provide individualized cancer therapy, to improve survival statistics, and to enhance quality-of-life. External stimuli including low- and high-penetration light have been shown to have the ability to turn drug delivery on and off in a non-invasive remotely-controlled fashion. The success of this approach has been closely related to the development of a variety of drug delivery systems - from photosensitive liposomes to gold nanocages - and relies on multiple mechanisms of drug release activation. In this review, we make reference to the two extremes of the light spectrum and their potential as triggers for the delivery of antitumor drugs, along with the most recent achievements in preclinical trials and the challenges to an efficient translation of this technology to the clinical setting.

Photo-responsive polymeric micelles and prodrugs: synthesis and characterization

Bio-recognizable and photocleavable amphiphilic glycopolymers and prodrugs containing photodegradable linkers (i.e. 5-hydroxy-2-nitrobenzyl alcohol) as junction points between bio-recognizable hydrophilic glucose (or maltose) and hydrophobic poly(α-azo-ε-caprolactone)-grafted alkyne or drug chains were synthesized by combining ring-opening polymerization, nucleophilic substitution, and “click” post-functionalization with alkynyl-pyrene and 2-nitrobenzyl-functionalized indomethacin (IMC). The block-grafted glycocopolymers could self-assemble into spherical photoresponsive micelles with hydrodynamic sizes of <200 nm. Fluorescence emission measurements indicated the release of Nile red, a hydrophobic dye, encapsulated by the Glyco-ONB-P(αN₃CL-g-alkyne)_n micelles, in response to irradiation caused by micelle disruption. Light-triggered bursts were observed for IMC-loaded or -conjugated micelles during the first 5 h. Following light irradiation, the drug release rate of IMC-conjugated micelles was faster than that of IMC-loaded micelles. Selective lectin binding experiments confirmed that glycosylated Glyco-ONB-P(αN₃CL-g-alkyne)_n could be used in bio-recognition applications. The nano-prodrug with and without UV irradiation was associated with negligible levels of toxicity at concentrations of less than 30 μg mL⁻¹. The confocal microscopy and flow cytometry results indicated that the uptake of doxorubicin (DOX)-loaded micelles with UV irradiation by HeLa cells was faster than without UV irradiation. The DOX-loaded Gluco-ONB-P(αN₃CL-g-PONBIMC)₁₀ micelles effectively inhibited HeLa cells' proliferation with a half-maximal inhibitory concentration of 8.8 μg mL⁻¹.

Bio-recognizable and photocleavable amphiphilic glycopolymers and prodrugs containing photodegradable linkers as junction points between hydrophilic glycose and hydrophobic poly(α-azo-ε-caprolactone)-grafted alkyne or drug chains were synthesized.

Polymers and hydrogels for local nucleic acid delivery

This review focusses on the rational design of materials (from polymers to hydrogel materials) to achieve successful local delivery of therapeutic nucleic acids.

Physically Targeted Intravenous Polyurethane Nanoparticles for Controlled Release of Atorvastatin Calcium

Background:

Intravenous drug delivery is an advantageous choice for rapid administration, immediate drug effect, and avoidance of first-pass metabolism in oral drug delivery. In this study, the synthesis, formulation, and characterization of atorvastatin-loaded polyurethane (PU) nanoparticles were investigated for intravenous route of administration.

Method:

First, PU was synthesized and characterized. Second, nanoparticles were prepared in four different ratios of drug to polymer through two different techniques, including emulsion-diffusion and single-emulsion. Finally, particle size and polydispersity index, shape and surface morphology, drug entrapment efficiency (EE), drug loading, and in vitro release were evaluated by dynamics light scattering, scanning electron microscopy, and UV visible spectroscopy, respectively.

Results:

Within two methods, the prepared nanoparticles had a spherical shape and a smooth surface with a diversity of size ranged from 174.04 nm to 277.24 nm in emulsion-diffusion and from 306.5 nm to 393.12 in the single-emulsion method. The highest EE was 84.76%, for (1:4) sample in the emulsion-diffusion method. It has also been shown that in vitro release of nanoparticles, using the emulsion-diffusion method, was sustained up to eight days by two mechanisms: drug diffusion and polymer relaxation.

Conclusion:

PU nanoparticles, that were prepared by the emulsion-diffusion method, could be used as effective carriers for the controlled drug delivery of poorly water soluble drugs such as atorvastatin calcium.

A biocompatible and magnetic nanocarrier with a safe UV-initiated docetaxel release and cancer secretion removal properties increases therapeutic potential for skin cancer

Cancer is a leading fatal disease worldwide. To increase its therapeutic efficiency, more effective with less side effect and patient acceptable administration approach is expected. Moreover, modification of tumor microenvironment is proved to be operative recently. In this paper, a nanocarrier named LDEDDS was developed for intelligent tropical administration of skin cancer, along with removal of hydrophobic cancerous secretion to change tumor microenvironment. It was made by coating of amphipathic polymer P(BA-co-HBA) on docetaxel (TXT, a model hydrophobic anticancer drug) loaded Fe₃O₄@ZnO. Results showed that an optimal loading rate of TXT in Fe₃O₄@ZnO was 89.75±0.15%, corresponding to loading capacity of 17.95±2.97% when the mass ratio of Fe₃O₄@ZnO to TXT was 1:20. The LDEDDS had a narrow distribution size of 115.8nm in average and was superparamagnetic. Without UV radiation, it had low TXT release (<7% in 48h) and cytotoxicity (<14% in 96h) to both the normal and carcinoma skin cells. While under a UV with a dose much lower than physiological dose of normal sunlight, LDEDDS released around 60% and 90% of TXT in 1 and 48h. 1h UV treated LDEDDS removed up to 62% of cancer secreted epidermal growth factor (EGF), a model hydrophobic secretion in 96h. Consequently, 1h UV treated LDEDDS inhibited up to 60% of the growth of skin cancer cells in 96h, overriding those effects of the same concentration of TXT in in vitro cellular experiments. This is the first study to change tumor microenvironment by removal of cancerous secretion and is proved to be effective. Along with the superparamagnetic property, which provides potential for concentrating, increasing penetration and internalization into cancerated cells as well as removing from body under an external magnetic field, we predict LDEDDS will have potential applications in clinic skin cancer therapy.

Field responsive materials: photo-, electro-, magnetic- and ultrasound-sensitive polymers

Recent advances in field-responsive polymers, which have emerged as highly promising materials for numerous applications, are highlighted.

Remotely Triggered Nano-Theranostics For Cancer Applications

Nanotechnology has enabled the development of smart theranostic platforms that can concurrently diagnose disease, start primary treatment, monitor response, and, if required, initiate secondary treatments. Recent in vivo experiments demonstrate the promise of using theranostics in the clinic. In this paper, we review the use of remotely triggered theranostic nanoparticles for cancer applications, focusing heavily on advances in the past five years. Remote triggering mechanisms covered include photodynamic, photothermal, phototriggered chemotherapeutic release, ultrasound, electro-thermal, magneto-thermal, X-ray, and radiofrequency therapies. Each section includes a brief overview of the triggering mechanism and summarizes the variety of nanoparticles employed in each method. Emphasis in each category is placed on nano-theranostics with in vivo success. Some of the nanotheranostic platforms highlighted include photoactivatable multi-inhibitor nanoliposomes, plasmonic nanobubbles, reduced graphene oxide-iron oxide nanoparticles, photoswitching nanoparticles, multispectral optoacoustic tomography using indocyanine green, low temperature sensitive liposomes, and receptor-targeted iron oxide nanoparticles loaded with gemcitabine. The studies reviewed here provide strong evidence that the field of nanotheranostics is rapidly evolving. Such nanoplatforms may soon enable unique advances in the clinical management of cancer. However, reproducibility in the synthesis procedures of such "smart" platforms that lend themselves to easy scale-up in their manufacturing, as well as the development of new and improved models of cancer that are more predictive of human responses, need to happen soon for this field to make a rapid clinical impact.

A light sensitive self-assembled nanogel as a tecton for protein patterning materials

A self-assembled nanogel is constructed from light-sensitive cholesteryl pullulan (Ls-CHP) by using photo-labile ortho-nitrobenzyl (o-NB) units. The nanogel-based film is obtained by evaporation of an Ls-CHP nanogel solution. Exposure of the resulting nanogel-based film to light with a mask resulted in a patterned film that can encapsulate FITC-insulin.

Photocleavable Hydrogels for Light-Triggered siRNA Release

A photocleavable hydrogel system for on-demand delivery of genetic material is reported. The release of short interfering RNAs can be triggered by the application of UV light without any loss in bioactivity. This approach provides a promising external stimulus-based nucleic acid delivery platform for applications in disease therapeutics and tissue regeneration.

Dual-stimuli-responsive glycopolymer bearing a reductive and photo-cleavable unit at block junction

Dual-stimuli-cleavable glycopolymers bearing a reductive and photo-cleavable unit at block junction were synthesized and characterization.

Nano-engineered electro-responsive drug delivery systems

Nano-engineering is exploited to address the slow drug release and low drug loading of electro-responsive drug delivery systems.

Photocontrolled release using one-photon absorption of visible or NIR light

Light is an excellent means to externally control the properties of materials and small molecules for many applications. Light's ability to initiate chemistries largely independent of a material's local environment makes it particularly useful as a bio-orthogonal and on-demand trigger in living systems. Materials responsive to UV light are widely reported in the literature; however, UV light has substantial limitations for in vitro and in vivo applications. Many biological molecules absorb these energetic wavelengths directly, not only preventing substantial tissue penetration but also causing detrimental photochemical reactions. The more innocuous nature of long-wavelength light (>400nm) and its ability at longer wavelengths (600-950nm) to effectively penetrate tissues is ideal for biological applications. Multi-photon processes (e.g. two-photon excitation and upconversion) using longer wavelength light, often in the near-infrared (NIR) range, have been proposed as a means of avoiding the negative characteristics of UV light. However, high-power focused laser light and long irradiation times are often required to initiate photorelease using these inefficient non-linear optical methods, limiting their in vivo use in mammalian tissues where NIR light is readily scattered. The development of materials that efficiently convert a single photon of long-wavelength light to chemical change is a viable solution to achieve in vivo photorelease. However, to date only a few such materials have been reported. Here we review current technologies for photo-regulated release using photoactive organic materials that directly absorb visible and NIR light.

Photoresponsive nanoparticles for drug delivery

Externally triggerable drug delivery systems provide a strategy for the delivery of therapeutic agents preferentially to a target site, presenting the ability to enhance therapeutic efficacy while reducing side effects. Light is a versatile and easily tuned external stimulus that can provide spatiotemporal control. Here we will review the use of nanoparticles in which light triggers drug release or induces particle binding to tissues (phototargeting).

Ultraviolet light-mediated drug delivery: Principles, applications, and challenges

UV light has been extensively employed in drug delivery because of its versatility, ease of manipulation, and ability to induce chemical changes on the therapeutic carrier. Here we review the mechanisms by which UV light affects drug delivery systems. We will present the challenges facing UV-induced drug delivery and some of the proposed solutions.

A novel legumain protease-activated micelle cargo enhances anticancer activity and cellular internalization of doxorubicin

Legumain is the only acidic asparaginly-endopeptidase in mammals that is highly up-regulated in tumor tissue and tumor associated cells. In this study, a novel legumain protease-activated micelle was successfully synthesized and prepared by loading with doxorubicin (DOX). The prepared micelle exhibited a spherical morphology and possessed a low critical micelle concentration of 1.21 × 10^-3 mg mL^-1 with a DOX loading capacity and entrapment efficiency of 4.05% and 60.6% respectively. The release profile of DOX from this micelle formulation was observed to be legumain concentration dependent. The micelle encapsulation of DOX highly enhanced the cellular uptake of DOX by tumor cell lines of DAOY, Y79, MCF-7, and MCF-7/DOX. Furthermore, encapsulation of DOX boosts the cytotoxicity against the tumor cells while reducing cytotoxicity against RPE and HEK293 cells. In addition, blank micelles did not exhibit any biological effects on tumor or RPE or HEK293 cells at the concentration range of 0-300 μg mL^-1, indicating good biocompatibility. The results suggest that this micelle formulation has potential applications in sustained drug delivery for legumain up-regulated tumors.

Regenerable fluorescent nanosensors for monitoring and recovering metal ions based on photoactivatable monolayer self-assembly and host-guest interactions

Efficient detection, removal, and recovery of heavy metal ions from aqueous environments represents a technologically challenging and ecologically urgent question in the face of increasing metal-related pollution and poisoning across the globe. Although small-molecule and entrapment-based nanoparticle sensors have been extensively explored for metal detection, neither of these extant strategies satisfies the critical needs for high-performance sensors that are inexpensive, efficient, and recyclable. Here we first report the development of a regenerable fluorescent nanosensor system for the selective and sensitive detection of multiple heavy metal ions, based on light-switchable monolayer self-assembly and host-guest interactions. The system exploits photocontrolled inclusion and exclusion responses of an α-cyclodextrin (CD)-containing surface conjugated with photoisomerizable azobenzene as a supramolecular system that undergoes reversible assembly and disassembly. The metal nanosensors can be facilely fabricated and photochemically switched between three chemically distinct entities, each having an excellent capacity for selective detecting specific metal ions (namely, Cu(2+), Fe(3+), Hg(2+)) in a chemical system and in assays on actual water samples with interfering contaminants.

Caging metal ions with visible light-responsive nanopolymersomes

Polymersomes are bilayer vesicles that self-assemble from amphiphilic diblock copolymers, and provide an attractive system for the delivery of biological and nonbiological molecules due to their environmental compatibility, mechanical stability, synthetic tunability, large aqueous core, and hyperthick hydrophobic membrane. Herein, we report a nanoscale photoresponsive polymersome system featuring a meso-to-meso ethyne-bridged bis[(porphinato)zinc] (PZn2) fluorophore hydrophobic membrane solute and dextran in the aqueous core. Upon 488 nm irradiation in solution or in microinjected zebrafish embryos, the polymersomes underwent deformation, as monitored by a characteristic red-shifted PZn2 emission spectrum and confirmed by cryo-TEM. The versatility of this system was demonstrated through the encapsulation and photorelease of a fluorophore (FITC), as well as two different metal ions, Zn(2+) and Ca(2+).

Synthesis, self-assembly, and degradation of amphiphilic triblock copolymers with fully photodegradable hydrophobic blocks

The development of stimuli-responsive materials is of significant interest for many applications including drug delivery, medical imaging, sensors, and microfluidic devices. Among the available stimuli, light is particularly attractive as it can be applied with high spatial and temporal resolution. We describe here the synthesis of amphiphilic triblock copolymers composed of poly(ethylene glycol) and a hydrophobic block containing o-nitrobenzyl esters throughout the backbone using copper-catalyzed azide–alkyne cycloaddition chemistry. These materials were designed to have a high weight fraction of the hydrophobic block to favour nonmicellar aggregates. The self-assembly in water was studied using nanoprecipitation and the resulting assemblies were characterized by dynamic light scattering and transmission electron microscopy. Under optimized conditions, it was possible to prepare polymer vesicles, commonly referred to as polymersomes, with diameters of approximately 100 nm. The degradation of these materials in response to UV light was studied by spectroscopy, light scattering, and electron microscopy, demonstrating that the vesicles were broken down. These results suggest the potential of these materials for applications such as encapsulation and release.

In Vivo Visible Light-Triggered Drug Release From an Implanted Depot

Controlling chemistry in space and time has offered scientists and engineers powerful tools for research and technology. For example, on-demand photo-triggered activation of neurotransmitters has revolutionized neuroscience. Non-invasive control of the availability of bioactive molecules in living organisms will undoubtedly lead to major advances; however, this requires the development of photosystems that efficiently respond to regions of the electromagnetic spectrum that innocuously penetrate tissue. To this end, we have developed a polymer that photochemically degrades upon absorption of one photon of visible light and demonstrated its potential for medical applications. Particles formulated from this polymer release molecular cargo in vitro and in vivo upon irradiation with blue visible light through a photoexpansile swelling mechanism.

Synthesis and characterization of thermo-responsive and photo-cleavable block copolymers as nanocarriers

In this study, we synthesized thermo-responsive and photo-cleavable amphiphilic block copolymers containing photodegradable linkers as junction points between hydrophilic and hydrophobic chains.

Photocontrolled nanoparticle delivery systems for biomedical applications

"Smart" stimuli-responsive nanomaterials are becoming popular as targeted delivery systems because they allow the use of internal or external stimuli to achieve spatial or temporal control over the delivery process. Among the stimuli that have been used, light is of special interest because it is not only noninvasive but also controllable both spatially and temporally, thus allowing unprecedented control over the delivery of bioactive molecules such as nucleic acids, proteins, drugs, etc. This is particularly advantageous for biomedical applications where specificity and selectivity are highly desired. Several strategies have evolved under the umbrella of light based delivery systems and can be classified into three main groups. The first strategy involves "caging" of the bioactive molecule using photolabile groups, loading these caged molecules onto a carrier and then "uncaging" or activating them at the targeted site upon irradiation with light of a particular wavelength. The second strategy makes use of nanocarriers that themselves are made photoresponsive either through modification with photosensitive groups or through the attachment of photolinkers on the carrier surface. These nanoparticles upon irradiation dissociate, releasing the cargo encapsulated within, or the photolinkers attaching the cargo to the surface get cleaved, resulting in release. The third approach makes use of the surface plasmon resonance of noble metal based nanoparticles. Upon irradiation with light at the plasmon resonant frequency, the resulting thermal or nonthermal field enhancement effects facilitate the release of bioactive molecules loaded onto the nanoparticles. In addition, other materials, certain metal sulfides, graphene oxide, etc., also exhibit photothermal transduction that can be exploited for targeted delivery. These approaches, though effective, are constrained by their predominant use of UV or visible light to which most photolabile groups are sensitive. Near infrared (NIR) excitation is preferred because NIR light is safer and can penetrate deeper in biological tissues. However, most photolabile groups cannot be excited by NIR light directly. So light conversion from NIR to UV/visible is required. Nanomaterials that display upconversion or two-photon-excitation properties have been developed that can serve as nanotransducers, converting NIR to UV/visible light to which the aforementioned photoresponsive moieties are sensitive. This Account will review the existing light-based nanoparticle delivery systems, their applications, the limitations they face, and the technologies that have emerged in an effort to overcome these limitations.

Stimuli-responsive polymeric nanoparticles for nanomedicine

Nature continues to be the ultimate in nanotechnology, where polymeric nanometer-scale architectures play a central role in biological systems. Inspired by the way nature forms functional supramolecular assemblies, researchers are trying to make nanostructures and to incorporate these into macrostructures as nature does. Recent advances and progress in nanoscience have demonstrated the great potential that nanomaterials have for applications in healthcare. In the realm of drug delivery, nanomaterials have been used in vivo to protect the drug entity in the systemic circulation, ensuring reproducible absorption of bioactive molecules that do not naturally penetrate biological barriers, restricting drug access to specific target sites. Several building blocks have been used in the formulation of nanoparticles. Thus, stability, drug release, and targeting can be tailored by surface modification. Herein the state of the art of stimuli-responsive polymeric nanoparticles are reviewed. Such systems are able to control drug release by reacting to naturally occurring or external applied stimuli. Special attention is paid to the design and nanoparticle formulation of these so-called smart drug-delivery systems. Future strategies for further developments of a promising controlled drug delivery responsive system are also outlined.

One-step electrodeposition of self-assembled colloidal particles: a novel strategy for biomedical coating

A novel biomedical coating was prepared from self-assembled colloidal particles through direct electrodeposition. The particles, which are photo-cross-linkable and nanoscaled with a high specific surface area, were obtained via self-assembly of amphiphilic poly(γ-glutamic acid)-g-7-amino-4-methylcoumarin (γ-PGA-g-AMC). The size, morphology, and surface charge of the resulting colloidal particles and their dependence on pH, initial concentrations, and UV irradiation were successfully studied. A nanostructured coating was formed in situ on the surface of magnesium alloys by electrodeposition of colloidal particles. The composition, morphology, and phase of the coating were monitored using Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, and X-ray diffraction. The corrosion test showed that the formation of the nanostructured coating on magnesium alloys effectively improved their initial anticorrosion properties. More importantly, the corrosion resistance was further enhanced by chemical photo-cross-linking. In addition, the low cytotoxicity of the coated samples was confirmed by MTT assay against NIH-3T3 normal cells. The contribution of our work lies in the creation of a novel strategy to fabricate a biomedical coating in view of the versatility of self-assembled colloidal particles and the controllability of the electrodeposition process. It is believed that our work provides new ideas and reliable data to design novel functional biomedical coatings.

1-Acetylpyrene-salicylic acid: photoresponsive fluorescent organic nanoparticles for the regulated release of a natural antimicrobial compound, salicylic acid

Photoresponsive 1-acetylpyrene-salicylic acid (AcPy-SA) nanoparticles (NPs) were developed for the regulated release of a natural antimicrobial compound, salicylic acid. The strong fluorescent properties of AcPy-SA NPs have been extensively used for potential in vitro cell imaging. The phototrigger capability of our newly prepared AcPy-SA NPs was utilized for the efficient release of an antimicrobial compound, salicylic acid. The photoregulated drug release of AcPy-SA NPs has been shown by the subsequent switching off and on of a visible-light source. In vitro biological studies reveal that AcPy-SA NPs of ∼68 nm size deliver the antimicrobial drug salicylic acid into the bacteria cells (Pseudomonas aeruginosa) and efficiently kill the cells upon exposure to visible light (≥410 nm). Such photoresponsive fluorescent organic NPs will be highly beneficial for targeted and regulated antimicrobial drug release because of their biocompatible nature, efficient cellular uptake, and light-induced drug release ability.

Plasmid DNA hydrogels for biomedical applications

In the last few years, our research group has focused on the design and development of plasmid DNA (pDNA) based systems as devices to be used therapeutically in the biomedical field. Biocompatible macro and micro plasmid DNA gels were prepared by a cross-linking reaction. For the first time, the pDNA gels have been investigated with respect to their swelling in aqueous solution containing different additives. Furthermore, we clarified the fundamental and basic aspects of the solute release mechanism from pDNA hydrogels and the significance of this information is enormous as a basic tool for the formulation of pDNA carriers for drug/gene delivery applications. The co-delivery of a specific gene and anticancer drugs, combining chemical and gene therapies in the treatment of cancer was the main challenge of our research. Significant progresses have been made with a new p53 encoding pDNA microgel that is suitable for the loading and release of pDNA and doxorubicin. This represents a strong valuable finding in the strategic development of systems to improve cancer cure through the synergetic effect of chemical and gene therapy.

A photo-degradable gene delivery system for enhanced nuclear gene transcription

There currently exists a significant gap in our understanding of how the detailed chemical characteristics of polycation gene carriers influence their delivery performances in overcoming an important cellular-level transport barrier, i.e., intranuclear gene transcription. In this study, a UV-degradable gene carrier material (ENE4-1) was synthesized by crosslinking low molecular weight branched polyethylenimine (bPEI-2k) molecules using UV-cleavable o-nitrobenzyl urethane (NBU) as the linker molecule. NBU degrades upon exposure to mild UV irradiation. Therefore, this UV-degradable carrier allows us to control the chemical characteristics of the polymer/DNA complex (polyplex) particles at desired locations within the intracellular environment. By using this photolytic DNA carrier, we found that the exact timing of the UV degradation significantly influences the gene transfection efficiencies of ENE4-1/DNA(pGL2) polyplexes in HeLa cells. Interestingly, even if the polyplexes were UV-degraded at different intracellular locations/times, their nuclear entry efficiency was not influenced by the location/timing of UV degradation. The UV treatment did not influence the size or binding strength of the polyplexes. However, we confirmed that the degradation of the carrier molecules impacts the chemical characteristics of the polyplexes (it produces carbamic acid and nitrosobenzyl aldehyde groups on ENE4-1). We believe that these anionic acid groups enhance the interaction of the polyplexes with nuclear transcription proteins and thus the final gene expression levels; this effect was found to occur, even though UV irradiation itself has a general effect of reducing transfection efficiencies. Excess (uncomplexed) ENE4-1 polymers appear to not play any role in the UV-enhanced gene transcription phenomenon.

Highest Efficiency Two-Photon Degradable Copolymer for Remote Controlled Release

To address the scarcity of polymers that degrade upon absorption of near infrared (NIR) light, we introduce a new polymer containing moieties in its backbone capable of highly efficient NIR-triggered photocleavage. The polymer rapidly undergoes backbone scission in response to both UV-Vis and near infrared light via two-photon absorption, as revealed by gel permeation chromatography. Cleavage of photosensitive groups from the backbone is confirmed by 1H NMR. These polymers were successfully formulated into particles encapsulating a dye that was released upon irradiation with UV-Vis and NIR light, as indicated by changes in fluorescence characteristic of increased solvent interaction with cargo. Thus, this new polymer is readily photocleaved by UV-Vis and NIR light, giving it a variety of potential applications in photopatterning and on-demand release.