Surface functionalization of a polymeric lipid bilayer for coupling a model biological membrane with molecules, cells, and microstructures

Nanofluidic Model Membrane for the Single-Molecule Observation of Membrane Proteins

Membrane proteins play essential roles in the cell, and they constitute one of the most important targets of drugs. Studying membrane proteins in a controlled model membrane environment can provide unambiguous, quantitative information on their molecular properties and functions. However, reconstituting membrane proteins in a model system poses formidable technological challenges. Here, we developed a novel model membrane platform for highly sensitive observation of membrane proteins by combining a micropatterned lipid membrane and a nanofluidic channel. A micropatterned model membrane was generated by lithographically integrating a polymerized lipid bilayer and a natural (fluid) lipid bilayer. A nanofluidic channel having a defined thickness was formed between the fluid bilayer and a polydimethylsiloxane (PDMS) slab by attaching the polymeric bilayer and PDMS slab using an adhesion layer composed of silica nanoparticles that are coated with a biocompatible polymer brush. As we reconstituted rhodopsin (Rh), a G-protein-coupled receptor (GPCR), from a detergent-solubilized state into the fluid bilayer, only successfully reconstituted Rh molecules diffused laterally in the lipid bilayer and migrated into the nanogap junction, where they could be observed with a vastly improved signal-to-background ratio. The nanogap junction effectively separates the sites of reconstitution and observation and provides a novel platform for studying the molecular properties and functions of membrane proteins at the single-molecular level.

Substrate-supported Model Membrane as a Versatile Analytical/Biosensing Platform

Biological membranes composed of a lipid bilayer and associated proteins work as a platform for highly selective and sensitive detection in nature. Substrate-supported lipid bilayers (SLBs) are a model system of the biological membrane that are mechanically stable, accessible to highly sensitive analytical techniques, and amenable to micro-fabrication, such as patterning. The surface of SLBs can effectively suppress the non-specific binding of proteins, and enhance selective detection by specific interactions. These features render SLBs highly attractive for the development of devices that utilize artificially mimicked cellular functions. Furthermore, SLBs can be combined with nanoscopic spaces, such as nano-channels and nano-pores, that can reduce the detection volume and suppress the non-specific background noise, enhancing the signal-to-background noise (S/B) ratio. SLBs therefore provide promising platforms for a wide range of biomedical and environmental analyses.

RGD-functionalized supported lipid bilayers modulate pre-osteoblast adherence and promote osteogenic differentiation

Biomaterial integration into bone requires optimal surface conditions to promote osteoprogenitor behavior, which is affected by integrin-binding via arginine-glycine-aspartate (RGD). RGD-functionalized supported lipid bilayers (SLBs) might be interesting as biomaterial coating in bone regeneration, because they allow integration of proteins, for example, growth factors, cytokines, and/or antibacterial agents. Since it is unknown whether and how they affect osteoprogenitor adhesion and differentiation, the aim was to investigate adhesion, focal adhesion formation, morphology, proliferation, and osteogenic potential of pre-osteoblasts cultured on RGD-functionalized SLBs compared to unfunctionalized SLBs and poly-l-lysine (PLL). After 17 hr, pre-osteoblast density on SLBs without or with RGD was similar, but lower than on PLL. Cell surface area, elongation, and number and size of phospho-paxillin clusters were also similar. Cells on SLBs without or with RGD were smaller, more elongated, and had less and smaller phospho-paxillin clusters than on PLL. OPN expression was increased on SLBs with RGD compared to PLL. Moreover, after 1 week, COL1a1 expression was increased on SLBs without or with RGD. In conclusion, pre-osteoblast adhesion and enhanced differentiation were realized for the first time on RGD-functionalized SLBs, pointing to a new horizon in the management of bone regeneration using biomaterials. Together with SLBs nonfouling nature and the possibility of adjusting SLB fluidity and peptide content make SLBs highly promising as substrate to develop innovative biomimetic coatings for biomaterials in bone regeneration.

Nanofluidic Biosensor Created by Bonding Patterned Model Cell Membrane and Silicone Elastomer with Silica Nanoparticles

Selective and sensitive detection of specific molecules in a solution containing diverse coexisting molecules is important in many biomedical and environmental applications, including diagnostics and pollutant detection. Here, a nanofluidic biosensor is developed to detect specific target molecules (e.g., toxin proteins) in the presence of nontarget molecules by bonding a patterned model cell membrane and a silicone elastomer (polydimethylsiloxane: PDMS) sheet using surface-modified silica nanoparticles as the adhesive layer. Owing to the uniform size of nanoparticles, a nanometric gap junction is formed between the fluid bilayer and PDMS (nanogap-junction). The thickness of the nanogap-junction is controlled by the size of the silica nanoparticles. Target molecules that specifically bind to the receptor molecules in the fluid bilayer are selectively transported into the nanogap-junction via lateral diffusion through the lipid membrane. A thinner gap formed with smaller nanoparticles can enhance the sensitivity (signal-to-background ratio) more effectively, owing to the suppression of nonspecific penetration of coexisting molecules. Silica nanoparticles also provide excellent mechanical robustness, realizing long-term stability of the gap structure. Nanogap-junction using silica nanoparticles provides a versatile platform for highly selective and sensitive sensing by realizing detection of specific target molecules in a solution containing more concentrated nontarget molecules.

Hybrid Model Membrane Combining Micropatterned Lipid Bilayer and Hydrophilic Polymer Brush

Substrate-supported planar lipid bilayers (SPBs) are being utilized as a versatile model system of the biological membrane. However, the proximity between the solid support and membrane limits utility of SPBs for the functional analyses of membrane proteins. Here, we present a model membrane that can enlarge the distance between the substrate surface and the membrane by combining a stable scaffold of polymerized lipid bilayer with a hydrophilic polymer brush. A micropatterned SPB was generated by the lithographic polymerization of diacetylene lipids and subsequent incorporation of natural (fluid) lipid bilayers. Hydrophilic polymer brush of poly-2-methacryloyloxyethyl phosphorylcholine (poly(MPC)) was formed on the surface of polymeric bilayer by the in situ atom transfer radical polymerization (ATRP) in aqueous solution, in the presence of embedded fluid lipid bilayers. A model membrane protein (Haloquadratum walsbyi bacteriorhodopsin: HwBR) could be reconstituted into the polymer brush-supported bilayers with significantly reduced immobile molecules. Furthermore, the polymer brush terminals could be functionalized by successively polymerizing MPC and 2-aminoethyl methacrylate (AMA). The reactive amine moiety of poly(AMA) enables to conjugate a wide range of biological molecules and surfaces to the membrane. The combination of micropatterned bilayer and polymer brush mimics the two- and three-dimensional structures of the biological membrane, providing a platform to assay membrane proteins in a truly biomimetic environment.

Nanometric Gap Structure with a Fluid Lipid Bilayer for the Selective Transport and Detection of Biological Molecules

The biological membrane is a natural biosensing platform that can detect specific molecules with extremely high sensitivity. We developed a biosensing methodology by combining a model biological membrane and a nanometer-sized gap structure on a glass substrate. The model membrane comprised lithographically patterned polymeric and fluid lipid bilayers. The polymeric bilayer was bonded to a poly(dimethylsiloxane) (PDMS) sheet by using an adhesion layer with a defined thickness (lipid vesicles). Extruded lipid vesicles having a biotin moiety on the surface were used as the adhesion layer in conjunction with the biotin-streptavidin linkage. A gap structure was formed between the fluid bilayer and PDMS (nanogap junction). The thickness of the gap structure was several tens of nanometers, as determined by the thickness of the adhesion layer. The nanogap junction acted as a sensitive biosensing platform. From a mixture of proteins (cholera toxin and albumin), the target protein (cholera toxin) was selectively transported into the gap by the specific binding to a glycolipid (GM1) in the fluid bilayer and lateral diffusion. The target protein molecules were then detected with an elevated signal-to-noise ratio due to the reduced background noise in the nanometric gap. The combination of selective transport and reduced background noise drastically enhanced the sensitivity toward the target protein. The nanogap junction should have broad biomedical applications by realizing highly selective and sensitive biosensing in samples having diverse coexisting molecules.

Steric Pressure among Membrane-Bound Polymers Opposes Lipid Phase Separation

Lipid rafts are thought to be key organizers of membrane-protein complexes in cells. Many proteins that interact with rafts have bulky polymeric components such as intrinsically disordered protein domains and polysaccharide chains. Therefore, understanding the interaction between membrane domains and membrane-bound polymers provides insights into the roles rafts play in cells. Multiple studies have demonstrated that high concentrations of membrane-bound polymeric domains create significant lateral steric pressure at membrane surfaces. Furthermore, our recent work has shown that lateral steric pressure at membrane surfaces opposes the assembly of membrane domains. Building on these findings, here we report that membrane-bound polymers are potent suppressors of membrane phase separation, which can destabilize lipid domains with substantially greater efficiency than globular domains such as membrane-bound proteins. Specifically, we created giant vesicles with a ternary lipid composition, which separated into coexisting liquid ordered and disordered phases. Lipids with saturated tails and poly(ethylene glycol) (PEG) chains conjugated to their head groups were included at increasing molar concentrations. When these lipids were sparse on the membrane surface they partitioned to the liquid ordered phase. However, as they became more concentrated, the fraction of GUVs that were phase-separated decreased dramatically, ultimately yielding a population of homogeneous membrane vesicles. Experiments and physical modeling using compositions of increasing PEG molecular weight and lipid miscibility phase transition temperature demonstrate that longer polymers are the most efficient suppressors of membrane phase separation when the energetic barrier to lipid mixing is low. In contrast, as the miscibility transition temperature increases, longer polymers are more readily driven out of domains by the increased steric pressure. Therefore, the concentration of shorter polymers required to suppress phase separation decreases relative to longer polymers. Collectively, our results demonstrate that crowded, membrane-bound polymers are highly efficient suppressors of phase separation and suggest that the ability of lipid domains to resist steric pressure depends on both their lipid composition and the size and concentration of the membrane-bound polymers they incorporate.

Supported Lipid Bilayers for the Generation of Dynamic Cell-Material Interfaces

Supported lipid bilayers (SLB) offer unique possibilities for studying cellular membranes and have been used as a synthetic architecture to interact with cells. Here, the state-of-the-art in SLB-based technology is presented. The fabrication, analysis, characteristics and modification of SLBs are described in great detail. Numerous strategies to form SLBs on different substrates, and the means to patteren them, are described. The use of SLBs as model membranes for the study of membrane organization and membrane processes in vitro is highlighted. In addition, the use of SLBs as a substratum for cell analysis is presented, with discrimination between cell-cell and cell-extracellular matrix (ECM) mimicry. The study is concluded with a discussion of the potential for in vivo applications of SLBs.

One-Photon Lithography for High-Quality Lipid Bilayer Micropatterns

A relevant question in cell biology with broad implications in biomedicine is how the organization and dynamics of interacting membranes modulate signaling cascades that involve cell-cell contact. The functionalization of surfaces with supported lipid bilayers containing tethered proteins is a particularly useful method to present ligands with membrane-like mobility to cells. Here, we present a method to generate micrometer-sized patches of lipid bilayers decorated with proteins. The method uses an economic microcontact printing technique based on one-photon lithography that can be easily implemented in a commercial laser scanning microscope. We verified that both proteins and lipids freely diffuse within the patterned bilayer, as assessed by z-scan fluorescence correlation spectroscopy and fluorescence recovery after photobleaching. These results suggest that the supported lipid bilayer patterns constitute an optimal system to explore processes involving direct interactions between cells. We also illustrate possible applications of this method by exploring the interaction of cells expressing the Fas receptor and patterns of lipid bilayers containing an agonist antibody against Fas.

Iterative layer-by-layer assembly of polymer-tethered multi-bilayers using maleimide–thiol coupling chemistry

The current study reports on the layer-by-layer assembly of a polymer-tethered lipid multi-bilayer stack using the iterative addition and roll out of giant unilamellar vesicles (GUVs) containing constituents with thiol and maleimide functional groups, respectively. Confocal microscopy and photobleaching experiments confirm stack integrity and stability over time, as well as the lateral fluidity of individual bilayers within the stacks. Complementary wide-field single molecule fluorescence microscopy and atomic force microscopy experiments show that increasing bilayer-substrate distances are associated with changes in lipid lateral mobility and bilayer morphology. Importantly, the described iterative approach can be employed to assemble multi-bilayer stacks with more than two bilayers, thus further reducing the influence of the underlying solid substrate on membrane behavior. Furthermore, the presence of lipopolymers within the multi-bilayer stacks results in fascinating membrane dynamics and organization properties, with interesting parallels to those found in plasma membranes. In that sense, the described multi-bilayer architecture represents an attractive model membrane platform for a variety of different biophysical studies.

DNA-based patterning of tethered membrane patches

Solid-supported lipid bilayers are useful model systems for mimicking cellular membranes; however, the interaction of the bilayer with the surface can disrupt the function of integral membrane proteins and impede topological transformations such as membrane fusion. As a result, a variety of tethered or cushioned lipid bilayer architectures have been described, which retain the proximity to the surface, enabling surface-sensitive techniques, but physically distance the bilayer from the surface. We have recently developed a method for spatially separating a lipid bilayer from a solid support using DNA lipids. In this system, a DNA strand is covalently attached to a glass slide or SiO2 wafer, and giant unilamellar vesicles (GUVs) displaying the complement rupture to form a planar lipid bilayer tethered above the surface. However, the location of the patch is random, determined by where the DNA-GUV initially binds to its complement. To allow greater versatility and control, we sought a way to pattern tethered membrane patches. We present a method for creating spatially distinct tethered membrane patches on a glass slide using microarray printing. Surface-reactive DNA sequences are spotted onto the slide, incubated to covalently link the DNA to the surface, and DNA-GUVs patches are formed selectively on the printed DNA. By interfacing the bilayers with microfluidic flow cells, materials can be added on top of or fused into the membrane to change the composition of the bilayers. With further development, this approach would enable rapid screening of different patches in protein binding assays and would enable interfacing patches with electrical detectors.