Graphene supported Co-g-C3N4 as a novel metal-macrocyclic electrocatalyst for the oxygen reduction reaction in fuel cells

Photocatalytic systems: reactions, mechanism, and applications

The photocatalytic field revolves around the utilization of photon energy to initiate various chemical reactions using non-adsorbing substrates, through processes such as single electron transfer, energy transfer, or atom transfer. The efficiency of this field depends on the capacity of a light-absorbing metal complex, organic molecule, or substance (commonly referred to as photocatalysts or PCs) to execute these processes. Photoredox techniques utilize photocatalysts, which possess the essential characteristic of functioning as both an oxidizing and a reducing agent upon activation. In addition, it is commonly observed that photocatalysts exhibit optimal performance when irradiated with low-energy light sources, while still retaining their catalytic activity under ambient temperatures. The implementation of photoredox catalysis has resuscitated an array of synthesis realms, including but not limited to radical chemistry and photochemistry, ultimately affording prospects for the development of the reactions. Also, photoredox catalysis is utilized to resolve numerous challenges encountered in medicinal chemistry, as well as natural product synthesis. Moreover, its applications extend across diverse domains encompassing organic chemistry and catalysis. The significance of photoredox catalysts is rooted in their utilization across various fields, including biomedicine, environmental pollution management, and water purification. Of course, recently, research has evaluated photocatalysts in terms of cost, recyclability, and pollution of some photocatalysts and dyes from an environmental point of view. According to these new studies, there is a need for critical studies and reviews on photocatalysts and photocatalytic processes to provide a solution to reduce these limitations. As a future perspective for research on photocatalysts, it is necessary to put the goals of researchers on studies to overcome the limitations of the application and efficiency of photocatalysts to promote their use on a large scale for the development of industrial activities. Given the significant implications of the subject matter, this review seeks to delve into the fundamental tenets of the photocatalyst domain and its associated practical use cases. This review endeavors to demonstrate the prospective of a powerful tool known as photochemical catalysis and elucidate its underlying tenets. Additionally, another goal of this review is to expound upon the various applications of photocatalysts.

Boosting Electrochemiluminescence Performance of a Dual-Active Site Iron Single-Atom Catalyst-Based Luminol-Dissolved Oxygen System via Plasmon-Induced Hot Holes

Due to the commonly low content of biomarkers in diseases, increasing the sensitivity of electrochemiluminescence (ECL) systems is of great significance for in vitro ECL diagnosis and biodetection. Although dissolved O2 (DO) has recently been considered superior to H2O2 as a coreactant in the most widely used luminol ECL systems owing to its improved stability and less biotoxicity, it still has unsatisfactory ECL performance because of its ultralow reactivity. In this study, an effective plasmonic luminol-DO ECL system has been developed by complexing luminol-capped Ag nanoparticles (AgNPs) with plasma-treated Fe single-atom catalysts (Fe-SACs) embedded in graphitic carbon nitride (g-CN) (pFe-g-CN). Under optimal conditions, the performance of the resulting ECL system could be markedly increased up to 1300-fold compared to the traditional luminol-DO system. Further investigations revealed that duple binding sites of pFe-g-CN and plasmonically induced hot holes that disseminated from AgNPs to g-CN surfaces lead to facilitate significantly the luminous reaction process of the system. The proposed luminol-DO ECL system was further employed for the stable and ultrasensitive detection of prostate-specific antigen in a wide linear range of 1.0 fg/mL to 1 μg/mL, with a pretty low limit of detection of 0.183 fg/mL.

Fe-g-C3N4/reduced graphene oxide lightless application for efficient peroxymonosulfate activation and pollutant mineralization: Comprehensive exploration of reactive sites

To overcome the shortcomings of homogeneous Fe ion activating peroxymonosulfate (PMS), such as high pH-dependence, limited cycling of Fe(III)/Fe(II) and sludge production, graphite carbon nitride (g-C₃N₄) is chosen as a support for Fe ions, and reduced graphene oxide (rGO) is employed to facilitate the electron transfer process, thereby enhancing catalysis. Herein, a ternary catalyst, Fe-g-C₃N₄/rGO, is first applied under lightless condition for PMS activation, which exhibits ideal performance for contaminant mineralization. 82.5 % of the total organic carbon (TOC) in 100 mL of 5 mg/L bis-phenol A (BPA) was removed within 20 min by the optimal catalyst named 30%rFe_0.2CN, which shows a strong pH adaptability over the range of 3-11 compared with a common Fenton-like system. Moreover, the highly stable Fe-g-C₃N₄/rGO/PMS catalytic system resists complex water matrices, especially those with high turbidity. To unveil the mechanism of PMS activation and pollutant degradation, the physicochemical properties of the as-prepared catalysts are comprehensively characterized by multiple techniques. The Fe(III) contained in both the Fe-N group and α-Fe₂O₃ component of 30%rFe_0.2CN not only directly reacts with PMS to produce sulfate radicals (SO₄^-) and hydroxyl radicals (OH), but also combines with PMS to form the essential [Fe(III)OOSO₃]⁺ active complex, thereby generating superoxide radicals (O₂^-) and singlet oxygen (¹O₂). Among the various reactive oxidizing species, ¹O₂ plays an important role in pollutant removal, which is additionally generated by the CO moiety of the catalyst activating PMS as well as PMS self-oxidation, indicating the dominance of the non-radical pathway in the pollutant degradation process. Due to the advantages of high efficiency, wide pH adaptability and stability, the proposed lightless Fe-g-C₃N₄/rGO/PMS catalytic system represents a promising avenue for practical wastewater purification.

Single cobalt atom anchored on carbon nitride with cobalt nitrogen/oxygen active sites for efficient Fenton-like catalysis

As one of the tactics to produce reactive oxygen radicals, the Fenton-like process has been widely developed to solve the increasingly severe problem of environmental pollution. However, establishing advanced mediators with sufficient stability and activity for practical application is still a long-term objective. Herein, we proposed a facile strategy through polymeric carbon nitride (pCN) in-situ growth single cobalt atom for efficient degradation of antibiotics by peroxymonosulfate (PMS) activation. X-ray absorption spectroscopy and high-angle annular dark field-scanning transmission electron microscopy prove the single cobalt atoms are successfully anchored on pCN. Moreover, extended X-ray absorption fine structure analysis shows that the embedded cobalt atoms are constructed by covalently forming the Co-N bond and Co-O bond, which endow the single-atom cobalt catalyst with high stability. Experiment results indicate that the prepared single-atom cobalt catalyst can be used for efficient PMS activation catalytic degradation of tetracycline with a high degradation rate of 98.7 % in 60 min. And the CoN/O sites with single cobalt atoms serve as the active site for generating active radical species (singlet oxygen) from PMS activation. This work may expand the strategy for constructing single-atom catalysts and extend its application for the advanced oxidation process.

Increased catalytic activity through ZnMo7O24/g-C3N4 heterostructured assemblies for greener indole condensation reaction at room temperature

As an economical conjugated polymer, graphitic carbon nitride (g-C3N4) has recently attracted much attention due to its exciting chemical and thermal stability and easy availability. Herein, we constructed a metal-coordinated graphitic carbon nitride (M-g-C3N4) catalyst through simple impregnation and calcination methods and used it as a new heterogeneous catalyst for the efficient synthesis of bis (indolyl) methanes and trisindolines under mild conditions. This reaction is performed efficiently in water as an environmentally friendly solvent at ambient conditions. The ZnMo7O24/g-C3N4 nanocomposite was synthesized by a simple method by immobilizing Mo7O24(NH4)6·4H2O and ZnCl2 on the surface of g-C3N4 under hydrothermal conditions. It was characterized by FT-IR, EDS, and electronic scanning microscopy (SEM). The metal doping of Mo and Zn on the surface of graphitic carbon nitride leads to the formation of a green catalyst that gives good to excellent yields of products in short reaction times with an easy working procedure. In addition, the ZnMo7O24/g-C3N4 catalyst could be reused at least five runs without apparent loss of efficiency.

Electrostatic self-assembled layered polymers form supramolecular heterojunction catalyst for photocatalytic reduction of high-stability nitrate in water

In this work, two polymers are connected by electrostatic self-assembly method to form a supramolecular heterojunction to remove pollutants. g-C₃N₄-Cl/PANI catalyst can be used for photocatalytic reduction of nitrate in water, and the nitrogen selectivity reaches 98.2%. Specially, charge density analysis and comparative experiments showed that the introduction of covalent chlorine increased in electron transfer conduction between layers. In addition, differential charge density and solid EPR tests reveal high electron density and electron transfer pathways for supramolecular heterostructures. The results of the work function give direct evidence for the high catalytic performance of the supramolecular heterojunction. The reasons and active species of photocatalytic reduction of nitrate by g-C₃N₄-Cl and g-C₃N₄-Cl/PANI are compared. The catalyst exhibits the performance of highly reducing nitrate to harmless nitrogen with the contribution of supramolecular heterojunction and covalent chlorine. In short, a new idea of constructing a supramolecular photocatalyst is proposed, which can be applied to efficiency reduce nitrate in water.

Degradation of mixed cationic dye pollutant by metal free melem derivatives and graphitic carbon nitride

Graphitic carbon nitride (GCN), a polymeric metal free catalyst is widely used to degrade the toxic organic dye from the aqueous pollution. However, its catalytic efficiency and effective simultaneous reduction of mixed dye is still a challenge. Here, we have tuned the physiochemical properties of the GCN and melem derivatives by facilely tuning the degree of polycondensation and examined their catalytic activity towards the removal of cationic dye individually and together in solution. Catalysts were synthesized by thermal treatment of low-cost melamine and characterized by XRD, FTIR, RAMAN, FE-SEM, EDX, UV-DRS, and FL spectroscopy to confirm materials' structure, phase, morphology and optical properties. A suitable phase of the catalyst (M-450) exhibited superior removal capacity with a high-rate constant compared to others. The results demonstrate that M-450 has a maximum loading efficacy of 2.13 and 1.12 mg g^-1 for methylene blue (MB) and Rhodamine B (RhB) dyes respectively in a single dye system. Attractively, when MB and RhB co-exist in the solution, the efficacy increased by 14% (2.44 mg g^-1) and 27% (1.43 mg g^-1) for MB and RhB respectively. The adsorption kinetics, stability, effect of pH and reusability of M-450 catalyst was testified. Further, radical scavenger experiments and terephthalic acid tests were carried out to explain the reaction mechanism involved in the degradation of textile dyes. Moreover, electron paramagnetic resonance (EPR) analysis validated the availability of hydroxyl radicals in the photocatalytic reaction. Excellent stability and reusability were attained even after five successive cycles, demonstrating a suitable photocatalyst for the efficient degradation of mixed dye.

Encapsulated RuP2-RuS2 nanoheterostructure with regulated interfacial charge redistribution for synergistically boosting hydrogen evolution electrocatalysis

Exploring cost-effective electrocatalysts with suitable hydrogen binding strength and rational micro/nano-architecture towards the hydrogen evolution reaction (HER) is crucial for energy technologies, yet remains a tough challenge. Herein we present the first instance of a nanoscale RuP₂-RuS₂ heterostructure encapsulated in N, P, and S co-doped porous carbon nanosheets (RuP₂-RuS₂/NPS-C) for boosting the HER. The synthesis involves the construction of a 2D core-shell structured precursor in which Ru³⁺-functionalized g-C₃N₄ is wrapped by poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol) followed by pyrolysis. In this nanocomposite, the unique architecture with a highly dispersed embedded RuP₂-RuS₂ nanoheterostructure guarantees not only full exposure of the active sites with enhanced robustness but also smooth mass/charge transfer. More significantly, the experimental results and theoretical calculations reveal that coupling RuP₂ with RuS₂ to construct a heterointerface can induce charge redistribution, giving rise to optimized hydrogen adsorption energy for substantially accelerating the HER. This work provides a novel strategy to engineer high-performance Ru-based electrocatalysts by elegantly modulating the micro-/nano-architecture and interface coupling effect.

Advanced Inorganic Nitride Nanomaterials for Renewable Energy: A Mini Review of Synthesis Methods

Inorganic nitride nanomaterials have attracted widespread attention for applications in renewable energy due to novel electrochemical activities and high chemical stabilities. For different renewable energy applications, there are many possibilities and uncertainties about the optimal nitride phases and nanostructures, which further promotes the exploration of controllable preparation of nitride nanomaterials. Moreover, unlike conventional nitrides with bulk or ceramic structures, the synthesis of nitride nanomaterials needs more accurate control to guarantee the target nanostructure along with the phase purity, which make the whole synthesis still a challenge to achieve. In this mini review, we mainly summarize the synthesis methods for inorganic nitride nanomaterials, including chemistry vapor deposition, self-propagation high-temperature synthesis, solid state metathesis reactions, solvothermal synthesis, etc. From the perspective of nanostructure, several novel nitrides, with nanostructures like nanoporous, two-dimensional, defects, ternary structures, and quantum dots, are showing unique properties and getting extensive attentions, recently. Prospects of future research in design and synthesis of functional inorganic nitrides are also discussed.

Enhancing iron redox cycling for promoting heterogeneous Fenton performance: A review

Conventional water treatment methods are difficult to remove stubborn pollutants emerging from surface water. Advanced oxidation processes (AOPs) can achieve a higher level of mineralization of stubborn pollutants. In recent years, the Fenton process for the degradation of pollutants as one of the most efficient ways has received more and more attention. While homogeneous catalysis is easy to produce sludge and the catalyst cannot be cycled. In contrast, heterogeneous Fenton-like reaction can get over these drawbacks and be used in a wider range. However, the reduction of Fe (III) to Fe(II) by hydrogen peroxide (H₂O₂) is still the speed limit step when generating reactive oxygen species (ROS) in heterogeneous Fenton system, which restricts the efficiency of the catalyst to degrade pollutants. Based on previous research, this article reviews the strategies to improve the iron redox cycle in heterogeneous Fenton system catalyzed by iron materials. Including introducing semiconductor, the modification with other elements, the application of carbon materials as carriers, the introduction of metal sulfides as co-catalysts, and the direct reduction with reducing substances. In addition, we also pay special attention to the influence of the inherent properties of iron materials on accelerating the iron redox cycle. We look forward that the strategy outlined in this article can provide readers with inspiration for constructing an efficient heterogeneous Fenton system.

Influence of Phosphorus Doping on Triazole-Based g-C3N5 Nanosheets for Enhanced Photoelectrochemical and Photocatalytic Performance

Triazole-based g-C₃N₅, a potential catalyst, has received little attention over the years. We prepared phosphorus-doped g-C₃N₅ with one triazole and two triazine units for the first time to investigate its photoelectrochemical (PEC) and photocatalytic properties. The doping states and crystalline structures of the samples were determined using X-ray techniques, namely, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption fine structure analysis. Our results suggested that the phosphorus was substituted into carbon sites form P-N/P═N bonds with four coordination, which contribute P 2p level donor states in the band gap to enhance light absorption and reduce charge separation. Therefore, P-doped g-C₃N₅ exhibited higher PEC current density and better photocatalytic efficiency toward the degradation of rhodamine B dye or tetracycline under light irradiation compared to the undoped g-C₃N₅ sample. However, excess phosphorus doping resulted in the formation of impurities and disrupted the triazine and triazole units, reducing the PEC and photocatalytic efficiency. In summary, P-doped g-C₃N₅ was successfully prepared in the present study and represents a promising, facile, and effective catalyst for energy applications and environmental remediation.

DFT calculations for single-atom confinement effects of noble metals on monolayer g-C3N4 for photocatalytic applications

Graphitic carbon nitride, as a very promising two-dimensional structure host for single atom catalysts (SACs), has been studied extensively due to its significant confinement effects of single atoms for photocatalytic applications. In this work, a systematic investigation of g-C3N4 confining noble metal single atoms (NM1@g-C3N4) will be performed by using DFT calculations. The geometric structure calculations indicate that the most favorable anchored sites for the NM1 is located in the six-fold cavity, and the deformed wrinkle space of g-C3N4 helps the NM1 to be stabilized in the six-fold cavity. The electronic structure calculations show that the conduction band of NM1@g-C3N4 moved down and crossed through the Fermi level, resulting in narrowing the band gap of the NM1@g-C3N4. Moreover, the confined NM1 provide a new channel of charge transport between adjacent heptazine units, resulting in a longer lifetime of photo-generated carriers except Ru, Rh, Os and Ir atoms. Furthermore, the d-band centres of NM1 in NM1@g-C3N4 show that Rh1@, Pd1@, Ir1@ and Pt1@g-C3N4 SACs may have better photocatalytic performance than other NM1@g-C3N4 SACs. Finally, Pt1@g-C3N4 SACs are considered to have higher photocatalytic activity than other NM1@g-C3N4 SACs. These results demonstrate that the confinement effects of noble metals on monolayer g-C3N4 not only makes the single atom more stable to be anchored on g-C3N4, but also enhances the photocatalytic activity of the system through the synergistic effect between the confined NM1 and the monolayer g-C3N4. These detailed research may provide theoretical support for engineers to prepare photocatalysts with higher activity.

Theoretical Study on a Potential Oxygen Reduction Reaction Electrocatalyst: Single Fe Atoms Supported on Graphite Carbonitride

In recent years, one of the research directions of proton-exchange membrane fuel cells (PEMFCs) was to exploit efficient electrocatalysts for oxygen reduction reaction (ORR) instead of precious metals. In this study, on the basis of the density-functional theory (DFT) calculations, we designed a new type of single-atom ORR electrocatalyst by doping single iron atoms into the N-coordination cavity of the substrate graphite carbonitride (Fe/g-C₃N₄). The adsorption site and the adsorption energy of all the intermediates, the reaction energy barriers, potential energy surface, and Mulliken charges have been analyzed. The feasible ORR reaction paths and the most favorable ORR reaction mechanism were performed. Our calculation results prove that Fe/g-C₃N₄ is a potential electrocatalyst toward ORR. This work proposes a novel notion for the development of cathode materials in PEMFCs.

Oxidative desulfurization of dibenzothiophene via layered graphitic carbon nitride-coordinated transition metal as a catalyst

In this study, graphitic carbon nitride (g-C3N4) has been synthesized. The cobalt-doped (CoO/g-C3N4) samples prepared by the impregnation method and their catalytic property were investigated on the ODS process.

Recent progress on strategies for the preparation of 2D/2D MXene/g-C3N4 nanocomposites for photocatalytic energy and environmental applications

This review summarizes the possible synthetic routes, optical and morphological features to explore the 2D/2D interface and mechanism path in 2D/2D MXene/g-C₃N₄ nanocomposites for photocatalytic applications.

Single transition metal anchored C9N4 sheets as an efficient catalyst for CO oxidation: a first-principles study

Single Ni/Co anchored C₉N₄ sheet works as an efficient catalyst for CO oxidation.

Rh Particles Supported on Sulfated g-C3N4: A Highly Efficient and Recyclable Heterogeneous Catalyst for Alkene Hydroformylation

The hydroformylation of alkenes with CO and H2 to manufacture aldehydes is one of the most large-scale chemical reactions. However, an efficient and recyclable heterogeneous catalyst for alkene hydroformylation is extremely in demand in academia and industry. In this study, a sulfated carbon nitride supported rhodium particle catalyst (Rh/S-g-C3N4) was successfully synthesized via an impregnation-borohydride reduction method and applied in the hydroformylation of alkenes. The catalysts were characterized by XRD, FTIR, SEM, TEM, XPS, and nitrogen adsorption. The influence of the sulfate content, pressure of syngas, temperature, and reaction time, as well as the stability of Rh/S-g-C3N4, on the hydroformylation was examined in detail. The delocalized conjugated structure in g-C3N4 can lead to the formation of electron-deficient aromatic intermediates with alkenes. The sulphate g-C3N4 has a defected surface owing to the formation of oxygen vacancies, which increased the adsorption and dispersion of RhNPs on the surface of g-C3N4. Therefore, Rh/S-g-C3N4 exhibited an outstanding catalytic performance for styrene hydroformylation (TOF = 9000 h−1), the conversion of styrene could reach 99.9%, and the regioselectivity for the branched aldehyde was 52% under the optimized reaction conditions. The catalytic properties of Rh/S-g-C3N4 were also studied in the hydroformylation of various alkenes and displayed an excellent catalytic performance. Furthermore, the reuse of Rh/S-g-C3N4 was tested for five recycling processes, without an obvious decrease in the activity and selectivity under the optimum reaction conditions. These findings demonstrated that Rh/S-g-C3N4 is a potential catalyst for heterogeneous hydroformylation.

3D matrixed DNA self-nanocatalyzer as electrochemical sensitizers for ultrasensitive investigation of DNA 5-methylcytosine

DNA methylation plays an important role in a variety of human diseases. Thus, accurately analyze 5-methylcytosine in different DNA segments is of great significance. Herein, we proposed a novel 3D matrixed DNA self-nanocatalyzer via gold nanoparticles (AuNPs) supporting DNA self-hybridization with hemin as biomimetic enzyme and methylene blue (MB) as electrochemical mediator, which was employed as an efficient electrochemical sensitizer for the ultrasensitive bioassay of DNA 5-methylcytosine. Meanwhile, the AuNPs, graphitic carbon nitride (g-C₃N₄) and reduced graphene oxide (rGO) was prepared as AuNPs/g-C₃N₄@rGO nanocomposites to coat on the electrode surface to immobilize the capture hairpin DNA (CH). In the presence of target DNA with 5-methylcytosine, the target DNA could hybridize with CH via the hyperstable triple-helix formation. Based on the specific biorecognition between biotin and streptavidin and immune recognition between anti-5-methylcytosine antibodies and 5-methylcytosine sites on the target DNA, the 3D matrixed DNA self-nanocatalyzer could be captured onto the electrode surface to generate an amplified electrochemical signal related to the concentration of 5-methylcytosine. Under the optimal conditions, the proposed strategy performed a linear range from 10^-17 M to 10^-8 M with a detection limit of 8.6 aM. Remarkably, this strategy could be expanded easily to various biomarkers, including protein, DNA, phosphorylation and glycosylation, providing a promising strategy for clinical diagnosis and mechanism investigation of various diseases.

Emerging Chemical Functionalization of g-C3N4: Covalent/Noncovalent Modifications and Applications

Atomically 2D thin-layered structures, such as graphene nanosheets, graphitic carbon nitride nanosheets (g-C₃N₄), hexagonal boron nitride, and transition metal dichalcogenides are emerging as fascinating materials for a good array of domains owing to their rare physicochemical characteristics. In particular, graphitic carbon nitride has turned into a hot subject in the scientific community due to numerous qualities such as simple preparation, electrochemical properties, high adsorption capacity, good photochemical properties, thermal stability, and acid-alkali chemical resistance, etc. Basically, g-C₃N₄ is considered as a polymeric material consisting of N and C atoms forming a tri-s-triazine network connected by planar amino groups. In comparison with most C-based materials, g-C₃N₄ possesses electron-rich characteristics, basic moieties, and hydrogen-bonding groups owing to the presence of hydrogen and nitrogen atoms; therefore, it is taken into account as an interesting nominee to further complement carbon in applications of functional materials. Nevertheless, g-C₃N₄ has some intrinsic limitations and drawbacks mainly related to a relatively poor specific surface area, rapid charge recombination, a limited light absorption range, and a poor dispersibility in both aqueous and organic mediums. To overcome these shortcomings, numerous chemical modification approaches have been conducted with the aim of expanding the range of application of g-C₃N₄ and enhancing its properties. In the current review, the comprehensive survey is conducted on g-C₃N₄ chemical functionalization strategies including covalent and noncovalent approaches. Covalent approaches consist of establishing covalent linkage between the g-C₃N₄ structure and the chemical modifier such as oxidation/carboxylation, amidation, polymer grafting, etc., whereas the noncovalent approaches mainly consist of physical bonding and intermolecular interaction such as van der Waals interactions, electrostatic interactions, π-π interactions, and so on. Furthermore, the preparation, characterization, and diverse applications of functionalized g-C₃N₄ in various domains are described and recapped. We believe that this work will inspire scientists and readers to conduct research with the aim of exploring other functionalization strategies for this material in numerous applications.

In Situ Grown Single-Atom Cobalt on Polymeric Carbon Nitride with Bidentate Ligand for Efficient Photocatalytic Degradation of Refractory Antibiotics

Semiconductor photocatalysis is a promising technology to tackle refractory antibiotics contamination in water. Herein, a facile in situ growth strategy is developed to implant single-atom cobalt in polymeric carbon nitride (pCN) via the bidentate ligand for efficient photocatalytic degradation of oxytetracycline (OTC). The atomic characterizations indicate that single-atom cobalt is successfully anchored on pCN by covalently forming the CoO bond and CoN bond, which will strengthen the interaction between single-atom cobalt and pCN. This single-atom cobalt can efficiently expand optical absorption, increase electron density, facilitate charge separation and transfer, and promote OTC degradation. As the optimal sample, Co(1.28%)pCN presents an outstanding apparent rate constant for OTC degradation (0.038 min^-1 ) under visible light irradiation, which is about 3.7 times than that of the pristine pCN. The electron spin resonance (ESR) tests and reactive species trapping experiments demonstrate that the ¹ O₂ , h⁺ , •O₂^- , and •OH are responsible for OTC degradation. This work develops a new way to construct single-atom-modified pCN and provides a green and highly efficient strategy for refractory antibiotics removal.

Facile Production of a Fenton-Like Photocatalyst by Two-Step Calcination with a Broad pH Adaptability

A novel heterogeneous Fenton-like photocatalyst, Fe-doped graphitic carbon nitride (Fe-g-C₃N₄), was produced by facile two-step calcination method. This Fe–g–C₃N₄ catalyzed rhodamine B degradation in the presence of H₂O₂ accompanied with visible light irradiation. transmission electron microscopy(TEM), x-ray diffraction (XRD), FT-IR, x-ray photoelectron spectroscopy (XPS), and photoluminescence fluorescent spectrometer (PL) characterization analysis methods were adopted to evaluate the physicochemical property of samples. It can be observed that the Fe-g-C₃N₄ exhibited excellent photocatalytic Fenton-like activity at a wide pH range of 3–9, with rhodamine B(RhB) degradation efficiency up to 95.5% after irradiation for 45 min in the presence of 1.0 mM H₂O₂. Its high activity was ascribed to the formation of Fe–N ligands in the triazine rings that accelerated electron movement driving the Fe(III)/Fe(II) redox cycle, and inhibited photo-generated electron hole re-combinations for continuous generation of reactive oxygen species by reactions between Fe(II) and H₂O₂. The main active oxygen species were hydroxyl radicals, followed by superoxide radicals and hole electrons. This produced catalyst of Fe–g–C₃N₄ shows excellent reusability and stability, and can be a promising candidate for decontamination of wastewater.

Iron-Cluster-Directed Synthesis of 2D/2D Fe-N-C/MXene Superlattice-like Heterostructure with Enhanced Oxygen Reduction Electrocatalysis

Metal clusters, an emerging category of materials with molecular metal dispersity, have been proposed for versatile applications. In this work, we show an unexpected function of metal clusters, which can contribute to preparing 2D/2D superlattice-like heterostructures. The key step is to use metal clusters to adjust the surface charge of 2D nanosheets and, consequently, match the charge negativities per surface area for different 2D nanosheets, which facilitate the electrical-driven assembly of these nanosheets into a superlattice-like heterostructure in aqueous solutions. Accordingly, iron-cluster-directed cationic Fe-N-C nanosheets (Zeta potential: +30.4 mV) have been assembled with anionic MXene (Zeta potential: -39.7 mV) to produce a superlattice-like heterostructure characteristic of a lateral size of around tens of nanometers, a surface area of 30 m² g^-1, and ultrathickness of several nanometers with repeated dimensions of 0.4 and 2.1 nm. Potential application of the synthesized Fe-N-C/MXene heterostructure has been demonstrated for electrocatalytic oxygen reduction reaction (ORR) that shows a positive onset potential of 0.92 V, four-electron transfer pathway, and strong durability of 20 h in alkaline electrolyte. This work suggests that metal clusters can assist the assembly of low-dimensional architectures for energy-related applications.

Highly uniform Rh nanoparticles supported on boron doped g-C3N4 as a highly efficient and recyclable catalyst for heterogeneous hydroformylation of alkenes

A highly efficient and recyclable Rh/B-g-C₃N₄ catalyst was firstly applied in hydroformylation of alkenes.