Structure and lateral interaction in mixed monolayers of dioctadecyldimethylammonium chloride (DOAC) and stearyl alcohol

Interfacial properties and micellization of triblock poly(ethylene glycol)-poly(ε-caprolactone)-polyethyleneimine copolymers

This study aimed to explore the link between block copolymers' interfacial properties and nanoscale carrier formation and found out the influence of length ratio on these characters to optimize drug delivery system. A library of diblock copolymers of PEG-PCL and triblock copolymers with additional PEI (PEG-PCL-PEI) were synthesized. Subsequently, a systematic isothermal investigation was performed to explore molecular arrangements of copolymers at air/water interface. Then, structural properties and drug encapsulation in self-assembly were investigated with DLS, SLS and TEM. We found the additional hydrogen bond in the PEG-PCL-PEI contributes to film stability upon the hydrophobic interaction compared with PEG-PCL. PEG-PCL-PEI assemble into smaller micelle-like (such as PEG-PCL4006-PEI) or particle-like structure (such as PEG-PCL8636-PEI) determined by their hydrophilic and hydrophobic block ratio. The distinct structural architectures of copolymer are consistent between interface and self-assembly. Despite the disparity of constituent ratio, we discovered the arrangement of both chains guarantees balanced hydrophilic-hydrophobic ratio in self-assembly to form stable construction. Meanwhile, the structural differences were found to have significant influence on model drugs incorporation including docetaxel and siRNA. Taken together, these findings indicate the correlation between molecular arrangement and self-assembly and inspire us to tune block compositions to achieve desired nanostructure and drug loading.

Surface- and Tip-Enhanced Raman Scattering in Tribology and Lubricant Detection—A Prospective

Surface-enhanced Raman scattering (SERS) and tip-enhanced Raman scattering (TERS) are fast, convenient, and non-destructive molecular detection techniques, which provide a practical method for studying interfacial reactions with high resolution and accuracy. Both techniques are able to provide quantitative and qualitative information on the chemical properties, conformational changes, order state, and molecular orientation of various surfaces. This paper aims at summarizing the research efforts in the field of SERS and TERS related to tribological systems with a special emphasis on thin film and nanoparticles. This overview starts with a brief introduction for both techniques. Afterwards, it summarizes pros and cons of both techniques related to the advanced characterization of tribologically induced reactions layers. Moreover, the feasibility of both techniques to evaluate the friction and wear performance of new lubricant additives including solid lubricants is discussed. At the end of this review article, the main challenges and future directions in this field are prospected to emphasize the development direction of SERS and TERS in tribology and lubricants.

Theoretical Description of Mixed Film Formation at the Air/Water Interface: Carboxylic Acids-Alcohols

The thermodynamic parameters of formation and clusterization of aliphatic alcohols C _n H_2n+1OH and carboxylic acids C _n H_2n+1COOH (n = 6-16) are calculated using the quantum-chemical semiempirical PM3 method. Four types of dimers are constructed in two directions of the spread monolayer comprising the most energetically advantageous monomer structures. The hydrophobic chains of alcohol and carboxylic acid molecules in the regarded dimers are found to be tilted within 12° to the normal of the spread monolayer. The structures of the mixed and pure surfactant dimers are the basis for the mixed alcohol-carboxylic acid monolayers of the following types: two dimensional (2D) film 1 with single distribution of the individual component in the other one, when the molecules of the first component do not interact with each other but are completely surrounded by the molecules of the second component; 2D film 2 with domain structure, when the film consists of "islands" of the individual components. The dependences of the clusterization Gibbs' energy per one monolayer molecule on the molar fraction of the components for the mixed 2D films 1 formed by surfactants with equal alkyl chain length are found to be limited from top to bottom by the corresponding dependences for pure components. This indicates the absence of synergetic interaction between the hydrophilic head groups of carboxylic acids and alcohols and conforms to the available experimental data. The formation of the described types of mixed films is competitive. The preferential formation of 2D films 1 with single distribution of the first component among the molecules of the second one is possible when the length of the carboxylic acid hydrocarbon chain is longer by Δn = 1-2 methylene units than that of the corresponding alcohol alkyl chain. According to the fractionally linear law, the highest possible content of the carboxylic acids in such 2D films 1 depends on the Δn value and does not exceed 33.3%.

Emerging investigator series: exploring the surface properties of aqueous aerosols coated with mixed surfactants

Mixed Langmuir monolayers of cholesterol with both saturated and unsaturated fatty acids, stearic acid (SA), and oleic acid (OA) spread at the air-seawater surface were studied. The phase behavior, molecular interaction, and conformational order of the monolayers were investigated by surface pressure-area (π-A) isotherms and infrared reflection-absorption spectroscopy (IRRAS) measurements. The thermodynamic parameters of the mixed films, including excess molecular area and excess Gibbs free energy were calculated by using the isotherm data. The interaction between SA (or OA) and cholesterol varied with the molar fraction of the fatty acids and surface pressure. OA/chol monolayers showed the characteristics of miscibility, but they acted as nonideal systems. Cholesterol has been observed to have a stabilizing effect on OA monolayers. The negative values of the excess Gibbs free energy in the entire composition range demonstrated that mixed OA/chol monolayers were thermodynamically stable. IRRAS spectra showed that mixing with cholesterol changes the ordering of fatty acid monolayers at the air-seawater surface. The findings provide general information regarding the structural changes in the monolayer induced by lateral packing. These results help in the understanding of the mixing behavior of fatty acids and cholesterol and provide insights into the fate of the mixed-monolayer-coated sea salt aerosol in the ocean environment.

Cooperative Effects of Zwitterionic-Ionic Surfactant Mixtures on the Interfacial Water Structure Revealed by Sum Frequency Generation Vibrational Spectroscopy

Cooperative effects of a series of equimolar binary zwitterionic-ionic surfactant mixtures on the interfacial water structure at the air-water interfaces have been studied by sum frequency generation vibrational spectroscopy (SFG-VS). For zwitterionic surfactant palmityl sulfobetaine (SNC₁₆), anionic surfactant sodium hexadecyl sulfate (SHS), and cationic surfactant cetyltrimethylammonium bromide (CTAB) with the same length of alkyl chain, significantly enhanced ordering of interfacial water molecules was observed for the zwitterionic-anionic surfactant mixtures SNC₁₆-SHS, indicating that SNC₁₆ interacts more strongly with SHS than with CTAB because of the strong headgroup-headgroup electrostatic attraction for SNC₁₆-SHS. Meanwhile, the SFG amplitude ratio of methyl and methylene symmetric stretching modes was used to verify the stronger interaction between SNC₁₆ and SHS. The conformational order indicator increased from 0.64 for SNC₁₆ to 7.17 for SNC₁₆-SHS but only 0.94 for SNC₁₆-CTAB. In addition, another anionic surfactant sodium dodecyl sulfate (SDS) was introduced to study the influence of chain-chain interaction. Decreased SFG amplitude of interfacial water molecules for SNC₁₆-SDS was observed. Therefore, both the headgroup-headgroup electrostatic interaction and chain-chain van der Waals attractive interaction of the surfactants play an important role in enhancing the ordering of interfacial water molecules. The results provided experimental and theoretical bases for practical applications of the surfactants.

Phase transition behaviors of the supported DPPC bilayer investigated by sum frequency generation (SFG) vibrational spectroscopy and atomic force microscopy (AFM)

The phase transition behaviors of a supported bilayer of dipalmitoylphosphatidyl-choline (DPPC) have been systematically evaluated by in situ sum frequency generation (SFG) vibrational spectroscopy and atomic force microscopy (AFM).

Origin of the Instability of Octadecylamine Langmuir Monolayer at Low pH

It has been reported that an octadecylamine (ODA) Langmuir monolayer becomes unstable at low pH values with no measurable surface pressure at around pH 3.5, suggesting significant dissolution of the ODA molecule into the subphase solution (Albrecht, Colloids Surf. A 2006, 284-285, 166-174). However, by lowering the pH further, ODA molecules reoccupy the surface, and a full monolayer is recovered at pH 2.5. Using surface sum-frequency spectroscopy and pressure-area isotherms, it is found that the recovered monolayer at very low pH has a larger area per molecule with many gauche defects in the ODA molecules as compared to that at high pH values. This structural change suggests that the reappearance of the monolayer is due to the adsorbed Cl(-) counterions to the protonated amine groups, leading to partial charge neutralization. This proposition is confirmed by intentionally adding monovalent salts (i.e., NaCl, NaBr, or NaI) to the subphase to recover the monolayer at pH 3.5, in which the detailed structure of the monolayer is confirmed by sum frequency spectra and the adsorbed anions by X-ray reflectivity.

Structural Reorganization and Fibrinogen Adsorption Behaviors on the Polyrotaxane Surfaces Investigated by Sum Frequency Generation Spectroscopy

Polyrotaxanes, such as supramolecular assemblies with methylated α-cyclodextrins (α-CDs) as host molecules noncovalently threaded on the linear polymer backbone, are promising materials for biomedical applications because they allow adsorbed proteins possessing a high surface flexibility as well as control of the cellular morphology and adhesion. To provide a general design principle for biomedical materials, we examined the surface reorganization behaviors and adsorption conformations of fibrinogen on the polyrotaxane surfaces with comparison to several random copolymers by sum frequency generation (SFG) vibrational spectroscopy. We showed that the polyrotaxane (OMe-PRX-PMB) with methylated α-CDs as the host molecule exhibited unique surface structures in an aqueous environment. The hydrophobic interaction between the methoxy groups of the methylated α-CD molecules and methyl groups of the n-butyl methacrylate (BMA) side chains may dominate the surface restructuring behavior of the OMe-PRX-PMB. The orientation analysis revealed that the orientation of the fibrinogen adsorbed on the OMe-PRX-PMB surface is close to a single distribution, which is different from the adsorption behaviors of fibrinogen on other polyrotaxane or random copolymer surfaces.

Molecular orientation of organic thin films on dielectric solid substrates: a phase-sensitive vibrational SFG study

Phase-sensitive SFG spectroscopy is employed to determine the absolute molecular orientation on the solid/air and solid/liquid interfaces.

Structure and stability studies of mixed monolayers of saturated and unsaturated phospholipids under low-level ozone

In the present study, stability and structure of single and binary mixed monolayers of an unsaturated phospholipid, DOPC, and a saturated phospholipid, DPPC-d75, on the water surface, were explored using the π-A isotherm, atomic force microscopy (AFM) and sum frequency generation (SFG) vibrational spectroscopy in various environments. Our results demonstrated that DOPC in the monolayers becomes unstable after the exposure to a low concentration of ozone (20 ± 10 ppb) or even to ambient laboratory air, which has a similar ozone level, but is stable in nitrogen or oxygen. DOPC can be selectively oxidized by a trace amount of ozone in the ambient environment but can be partially inhibited by the presence of DPPC in the monolayer. The present study provides useful information for understanding the physicochemical properties of the cell membranes.

Unveiling the membrane-binding properties of N-terminal and C-terminal regions of G protein-coupled receptor kinase 5 by combined optical spectroscopies

G protein-coupled receptor kinase 5 (GRK5) is thought to associate with membranes in part via N- and C-terminal segments that are typically disordered in available high-resolution crystal structures. Herein we investigate the interactions of these regions with model cell membrane using combined sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. It was found that both regions associate with POPC lipid bilayers but adopt different structures when doing so: GRK5 residues 2-31 (GRK5(2-31)) was in random coil whereas GRK5(546-565) was partially helical. When the subphase for the GRK5(2-31) peptide was changed to 40% TFE/60% 10 mM phosphate pH 7.4 buffer, a large change in the SFG amide I signal indicated that GRK5(2-31) became partially helical. By inspecting the membrane behavior of two different segments of GRK5(2-31), namely, GRK5(2-24) and GRK5(25-31), we found that residues 25-31 are responsible for membrane binding, whereas the helical character is imparted by residues 2-24. With SFG, we deduced that the orientation angle of the helical segment of GRK5(2-31) is 46 ± 1° relative to the surface normal in 40% TFE/60% 10 mM phosphate pH = 7.4 buffer but increases to 78 ± 11° with higher ionic strength. We also investigated the effect of PIP2 in the model membrane and concluded that the POPC:PIP2 (9:1) lipid bilayer did not change the behavior of either peptide compared to a pure POPC lipid bilayer. With ATR-FTIR, we also found that Ca(2+)·calmodulin is able to extract both peptides from the POPC lipid bilayer, consistent with the role of this protein in disrupting GRK5 interactions with the plasma membrane in cells.

Investigating the interactions of the 18kDa translocator protein and its ligand PK11195 in planar lipid bilayers

The functional effects of a drug ligand may be due not only to an interaction with its membrane protein target, but also with the surrounding lipid membrane. We have investigated the interaction of a drug ligand, PK11195, with its primary protein target, the integral membrane 18kDa translocator protein (TSPO), and model membranes using Langmuir monolayers, quartz crystal microbalance with dissipation monitoring (QCM-D) and neutron reflectometry (NR). We found that PK11195 is incorporated into lipid monolayers and lipid bilayers, causing a decrease in lipid area/molecule and an increase in lipid bilayer rigidity. NR revealed that PK11195 is incorporated into the lipid chain region at a volume fraction of ~10%. We reconstituted isolated mouse TSPO into a lipid bilayer and studied its interaction with PK11195 using QCM-D, which revealed a larger than expected frequency response and indicated a possible conformational change of the protein. NR measurements revealed a TSPO surface coverage of 23% when immobilised to a modified surface via its polyhistidine tag, and a thickness of 51Å for the TSPO layer. These techniques allowed us to probe both the interaction of TSPO with PK11195, and PK11195 with model membranes. It is possible that previously reported TSPO-independent effects of PK11195 are due to incorporation into the lipid bilayer and alteration of its physical properties. There are also implications for the variable binding profiles observed for TSPO ligands, as drug-membrane interactions may contribute to the apparent affinity of TSPO ligands.

Effect of functional group on the monolayer structures of biodegradable quaternary ammonium surfactants

The monolayer structures and conformational ordering of cationic surfactants including the biodegradable quaternary ammonium molecules have been systematically characterized by π-A isotherm, surface potential, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and sum frequency generation (SFG) vibrational spectroscopy. It was found that the monolayer of the typical dialkyl dimethylammonium on the water surface was less densely packed along with many conformational gauche defects. The packing density and ordering of these monolayers were improved as halide ions were added to the subphase. A similar condensation effect was also observed when amide or ester groups are present in the alkyl tails of the surfactant. These results are discussed on the basis of the repulsive electrostatic interactions between the terminal ammonium moieties, the hydrogen bonding between the functional groups in the alkyl chains, as well as the flexibility of the alkyl chains in these surfactants. The present study is crucial to understanding the relationship between the interfacial structures and the functionalities of the biodegradable quaternary ammonium surfactants.