Conformation-specific self-assembly of thermo-responsive poly(ethylene glycol)-b-polypeptide diblock copolymer

Effects of Secondary Structures and pH on the Self-Assembly of Poly(ethylene glycol)-b-polytyrosine

Different from conventional synthetic polymers, polypeptides exhibit a distinguishing characteristic of adopting specific secondary structures, including random coils, α-helixes, and β-sheets. The conformation determines the rigidity and solubility of polypeptide chains, which further direct the self-assembly and morphology of the nanostructures. We studied the effect of distinct secondary structures on the self-assembly behavior of polytyrosine (PTyr)-derived amphiphilic copolymers. Two block copolymers of enantiopure poly(ethylene glycol)-b-poly(l-tyrosine) (PEG-b-P(l-Tyr)) and racemic poly(ethylene glycol)-b-poly(dl-tyrosine) (PEG-b-P(dl-Tyr)) were synthesized through the ring-opening polymerization of l-tyrosine N-thiocarboxyanhydride (l-Tyr-NTA) and dl-tyrosine N-thiocarboxyanhydride (dl-Tyr-NTA), respectively, by using poly(ethylene glycol) amine as the initiator. PEG44-b-P(l-Tyr)10 adopts a β-sheet conformation and self-assembles into rectangular nanosheets in aqueous solutions, while PEG44-b-P(dl-Tyr)9 is primarily in a random coil conformation with a tiny content of β-sheet structures, which self-assembles into sheaf-like nanofibrils. A pH increase results in the ionization of phenolic hydroxyl groups, which decreases the β-sheet content and increases the random coil content of the PTyr segments. Accordingly, PEG44-b-P(l-Tyr)10 and PEG44-b-P(dl-Tyr)9 self-assemble to form slender nanobelts and twisted nanoribbons, respectively, in alkaline aqueous solutions. The secondary structure-driven self-assembly of PTyr-derived copolymers is promising to construct filamentous nanostructures, which have potential for applications in controlled drug release.

Position Matters: Pyridine Regioisomers Influence Secondary Structure and Micelle Morphology in Polymer-Homopolypeptide Micelles

Polymer-homopolypeptide block copolymers are a class of bioinspired materials that combine the processability and stability of synthetic polymers with the biocompatibility and unique secondary structures of peptides, such as α-helices and β-sheets. These properties make them ideal candidates for a wide variety of applications, for example, in the pharmaceutical field, where they are frequently explored as building blocks for polymeric micelle drug delivery systems. While homopolypeptide side chains can be furnished with an array of different moieties to impart the copolymers with desirable properties, such as stimulus responsivity, pyridine derivatives represent an underutilized functional group for this purpose. Additionally, the interplay between polypeptide side chain structure, secondary conformation, and micelle morphology is not yet well understood, particularly in the case of structural regioisomers. Therefore, in this work, a series of polymer-homopolypeptide copolymers were prepared from a poly(ethylene glycol)-b-poly(glutamic acid) (PEG-b-PGA) backbone, where the pendant carboxylic acid groups were covalently conjugated to a series of pyridine regioisomers by carbodiimide coupling. These pyridine regioisomers differed only in the position of the nitrogen heteroatom, ortho, meta or para, relative to the linking group, generating a series of PEG-b-poly(pyridinylmethyl glutamate) (PEG-b-PMG) copolymers. Following self-assembly of the copolymers in aqueous solutions, dynamic light scattering (DLS) revealed differences in micelle hydrodynamic diameter (Dh) (ranging from ∼60 to 120 nm), while transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) revealed distinctive morphologies ranging from ellipsoidal, to cylindrical, and disc-like, suggesting that subtle changes in positional isomers in the polypeptide block may influence the micelle structure. Analysis of the PEG-b-PMG copolymer micelles by circular dichroism (CD) and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy revealed that differences in the morphology were associated with changes in polypeptide secondary structure, which in turn was influenced by the position of the pyridine heteroatom. Overall, these findings contribute to the broader understanding of the relationship between polypeptide structure and micelle morphology and serve as useful insight for the rational design of polymer-polypeptide nanoparticles.

Self-Assembly of Poly(Amino Acid)s Mediated by Secondary Conformations

Self-assembly of block copolymers has recently drawn great attention due to its remarkable performance and wide variety of applications in biomedicine, biomaterials, microelectronics, photoelectric materials, catalysts, etc. Poly(amino acid)s (PAAs), formed by introducing synthetic amino acids into copolymer backbones, are able to fold into different secondary conformations when compared with traditional amphiphilic copolymers. Apart from changing the chemical composition and degree of polymerization of copolymers, the self-assembly behaviors of PAAs could be controlled by their secondary conformations, which are more flexible and adjustable for fine structure tailoring. In this article, we summarize the latest findings on the variables that influence secondary conformations, in particular the regulation of order-to-order conformational changes and the approaches used to manage the self-assembly behaviors of PAAs. These strategies include controlling pH, redox reactions, coordination, light, temperature, and so on. Hopefully, we can provide valuable perspectives that will be useful for the future development and use of synthetic PAAs.

Thermo-induced physically crosslinked polypeptide-based block copolymer hydrogels for biomedical applications

Stimuli-responsive synthetic polypeptide-containing block copolymers have received considerable attention in recent years. Especially, unique thermo-induced sol-gel phase transitions were observed for elaborately-designed amphiphilic diblock copolypeptides and a range of poly(ethylene glycol) (PEG)-polypeptide block copolymers. The thermo-induced gelation mechanisms involve the evolution of secondary conformation, enhanced intramolecular interactions, as well as reduced hydration and increased chain entanglement of PEG blocks. The physical parameters, including polymer concentrations, sol-gel transition temperatures and storage moduli, were investigated. The polypeptide hydrogels exhibited good biocompatibility in vitro and in vivo, and displayed biodegradation periods ranging from 1 to 5 weeks. The unique thermo-induced sol-gel phase transitions offer the feasibility of minimal-invasive injection of the precursor aqueous solutions into body, followed by in situ hydrogel formation driven by physiological temperature. These advantages make polypeptide hydrogels interesting candidates for diverse biomedical applications, especially as injectable scaffolds for 3D cell culture and tissue regeneration as well as depots for local drug delivery. This review focuses on recent advances in the design and preparation of injectable, thermo-induced physically crosslinked polypeptide hydrogels. The influence of composition, secondary structure and chirality of polypeptide segments on the physical properties and biodegradation of the hydrogels are emphasized. Moreover, the studies on biomedical applications of the hydrogels are intensively discussed. Finally, the major challenges in the further development of polypeptide hydrogels for practical applications are proposed.

Protein-Inspired Polymers with Metal-Site-Regulated Ordered Conformations

Metal ions play critical roles in facilitating peptide folding and inducing conformational transitions, thereby impacting on the biological activity of many proteins. However, the effect of metal sites on the hierarchical structures of biopolymers is still poorly understood. Herein, inspired by metalloproteins, we report an order-to-order conformational regulation in synthetic polymers mediated by a variety of metal ions. The copolymers are decorated with clinically available desferrioxamine (DFO) as an exogenous ligand template, which presents a geometric constraint toward peptide backbone via short-range hydrogen bonding interactions, thus dramatically altering the secondary conformations and self-assembly behaviors of polypeptides and allowing for a controllable β-sheet to α-helix transition modulated by metal-ligand interactions. These metallopolymers could form ferritin-inspired hierarchical structures with high stability and membrane activity for efficient brain delivery across the blood-brain barrier (BBB) and long-lasting magnetic resonance imaging (MRI) in vivo.

Double hydrophilic copolymers - synthetic approaches, architectural variety, and current application fields

Solubility and functionality of polymeric materials are essential properties determining their role in any application. In that regard, double hydrophilic copolymers (DHC) are typically constructed from two chemically dissimilar but water-soluble building blocks. During the past decades, these materials have been intensely developed and utilised as, e.g., matrices for the design of multifunctional hybrid materials, in drug carriers and gene delivery, as nanoreactors, or as sensors. This is predominantly due to almost unlimited possibilities to precisely tune DHC composition and topology, their solution behavior, e.g., stimuli-response, and potential interactions with small molecules, ions and (nanoparticle) surfaces. In this contribution we want to highlight that this class of polymers has experienced tremendous progress regarding synthesis, architectural variety, and the possibility to combine response to different stimuli within one material. Especially the implementation of DHCs as versatile building blocks in hybrid materials expanded the range of water-based applications during the last two decades, which now includes also photocatalysis, sensing, and 3D inkjet printing of hydrogels, definitely going beyond already well-established utilisation in biomedicine or as templates.

Ordered Conformation-Regulated Vesicular Membrane Permeability

In nature, the folding and conformation of proteins can control the cell or organelle membrane permeability and regulate the life activities. Here we report the first example of synthetic polypeptide vesicles that regulate their permeability via ordered transition of secondary conformations, in a manner similar to biological systems.  The polymersomes undergo a β-sheet to α-helix transition in response to reactive oxygen species (ROS), leading to wall thinning without loss of vesicular integrity. The change  of membrane structure increases the vesicular permeability and enables specific transport of payloads with different molecular weights.The change of membrane structure increases the vesicular permeability.  As a proof-of-concept, the polymersomes encapsulating enzymes could serve as nanoreactors and carries for glucose-stimulated insulin secretion in vivo inspired by human glucokinase, resulting in safe and effective treatment of type 1 diabetes mellitus in mouse models. This study will help understand the biology of biomembranes and facilitate the engineering of nanoplatforms for biomimicry, biosensing, and controlled delivery applications.

Regulating the morphology and size of homopolypeptide self-assemblies via selective solvents

It remains a great challenge to control the morphology and size of self-assembled homopolypeptide aggregates. In this work, rod-like micelles including spindles and cylinders were prepared by a solution self-assembly of poly(γ-benzyl-l-glutamate) (PBLG) homopolypeptides with different degrees of polymerization, in which their size was controlled precisely by tuning the ratio of water/methanol in selective cosolvents. The length of the rod-like micelles increased with an increasing amount of methanol in the selective cosolvents, which was confirmed using the combination of SEM, TEM and AFM. The self-assembly mechanism of PBLG in selective cosolvents was investigated by using complementary Fourier transform infrared (FT-IR), circular dichroism (CD) and low-field NMR analyses. It was found that the shrinkage and swelling of PBLG chains play important roles in the self-assembly process. The obtained results may provide a guideline for the study of regulating the assembled aggregate sizes.

Rapidly Thermoreversible and Biodegradable Polypeptide Hydrogels with Sol-Gel-Sol Transition Dependent on Subtle Manipulation of Side Groups

Thermoreversible hydrogels are attractive materials for biomedical applications, but their applications are still limited by nonbiodegradability and/or slow temperature-dependent gel-to-sol transition rates. In this research, we prepared a range of amphiphilic diblock, triblock, and four-armed star block copolymers composed of poly(ethylene glycol) (PEG) and poly(γ-(2-(2-ethoxyethoxy)ethyl)-l-glutamate) (P(EEO₂LG)) segments, which can form rapidly thermoreversible hydrogels at physiological temperature. Intriguingly, the obtained hydrogels can transform from gel to sol within 10-70 s in response to the temperature decrease from 37 to 0 °C. The thermosensitive sol-gel-sol transitions are markedly faster than previously reported thermoreversible PEG-poly(l-glutamate) derivative hydrogels with subtle differences in the side groups and a widely studied poly(d,l-lactide-co-glycolide)-b-PEG-b-poly(d,l-lactide-co-glycolide) (PLGA-PEG-PLGA) hydrogel that required a much longer time of 40∼150 min. Further investigation of the relationship between the hydrogel property and polymer structure is performed, and the self-assembly mechanisms of different copolymers are proposed. Cytotoxicity assays and subcutaneous degradation experiments reveal that the PEG/P(EEO₂LG) block copolymers are biocompatible and biodegradable. The polypeptide hydrogel can therefore be used as a three-dimensional platform for facile cell culture and collection by regulating the temperature.

Open-air synthesis of oligo(ethylene glycol)-functionalized polypeptides from non-purified N-carboxyanhydrides

With PEG-like properties, such as hydrophilicity and stealth effect against protein absorption, oligo(ethylene glycol) (OEG)-functionalized polypeptides have emerged as a new class of biomaterials alternative to PEG with polypeptide-like properties. Synthesis of this class of materials, however, has been demonstrated very challenging, as the synthesis and purification of OEG-functionalized N-carboxyanhydrides (OEG-NCAs) in high purity, which is critical for the success in polymerization, is tedious and often results in low yield. OEG-functionalized polypeptides are therefore only accessible to a few limited labs with expertise in this specialized NCA chemistry and materials. Here, we report the controlled synthesis of OEG-functionalized polypeptides in high yield directly from the OEG-functionalized amino acids via easy and reproducible polymerization of non-purified OEG-NCAs. The prepared amphiphilic block copolypeptides can self-assemble into narrowly dispersed nanoparticles in water, which show properties suitable for drug delivery applications.

Allostery-Mimicking Self-assembly of Helical Poly(phenylacetylene) Block Copolymers and the Chirality Transfer

Allostery can regulate protein self-assembly which further affects biological activities, and achieving precise control over the chiral suprastructures during self-assembly remains challenging. Herein, to mimic the allosterical nature of proteins, the poly(phenylacetylene) block copolymers PPA-b-PsmNap with the dynamic helical backbone were synthesized to investigate their conformational-transition-induced self-assembly. As the helical conformation of the block PsmNap spontaneously transforms from cis-transiod to cis-cisoid, the decreasing solubility of PsmNap blocks in THF induced self-assembly of PPA-b-PsmNap. The self-assembly structures of copolymers can sequentially evolve from vesicles to nanobelts to helical strands during the process of conformation transformation. The screw sense of final helical strands was strictly correlated to the helicity of the block PsmNap. This is helpful to understand the mechanism of allostery-modulated self-assembly.

Transition of Conformation and Solubility in β-Sheet-Structured Poly(l-cysteine)s with Methylthio or Sulfonium Pendants

Poly(l-cysteine)s with methylthio pendants (PMTLCs) were synthesized by ring-opening polymerization of a new l-cysteine-based N-carboxyanhydride. The thioether bonds of PMTLC can be readily oxidized by H₂O₂ yielding water-soluble PMTLC^OX. The methylthio groups can undergo an alkylation reaction using methyl iodide and a subsequent ion-exchange reaction yielding sulfonium-based polypeptides (PPLC-DMS-X, where X = I, BF₄). PPLC-DMS-X showed upper critical solution temperature-type thermo- and oxidation-responsive properties in aqueous solutions. Both PMTLC and PPLC-DMS-X showed oxidation-induced β-sheet to α-helix transitions. The absorbance of PPLC-DMS-I and methyl orange aqueous solution displayed a significant linear correlation with temperature, which makes the sulfonium-based polypeptides good candidates in the field of temperature sensors.

Structure and Oxidation Effects on Conformation and Thermoresponsiveness of the OEGylated Poly(glutamic acid)-Bearing Side-Chain Thioether Linkers

A series of side-chain thioether-linked OEGylated poly(glutamic acid) (PGAs) have been synthesized by "thiol-ene" synthetic methodology, where both the oligo-ethylene glycol (OEG) length and the hydrophobic linkers at the side chains are varied to learn how these structural features affect the secondary structure and thermoresponsive behaviors in water. Before side-chain oxidation, the structural factors affecting the α-helicity include the backbone length, the OEG length, and the hydrophobic linkers' length at the side chains; however, the OEG length plays the most crucial role among these factors because longer OEG around the peripheral side chains can stop water penetration into the backbone to disturb the intramolecular H bonds, which finally allows stabilizing the α-helix; after the oxidation, the polypeptides show increased α-helicity because of the enhanced hydrophilicity. More interestingly, a rare oxidation-induced conformation transition from the ordered β-sheet to the ordered α-helix can be achieved. In addition, only the OEGylated poly(glutamic acids) (PGAs) with shorter hydrophobic linkers and longer OEG can display the thermoresponsive properties before the oxidation but the subsequent oxidation can cause the polypeptides bearing longer hydrophobic linkers to exhibit the thermosensitivity since sulfone formation at the side chain can lead to final hydrophilicity-hydrophobicity balance. This work is meaningful to understand the secondary structure-associated solution behaviors of the synthetic polypeptides.

What will happen when thermoresponsive poly(N-isopropylacrylamide) is tethered on poly(ionic liquid)s?

The thermoresponsive ionic liquid diblock copolymer of poly[1-(4-vinylbenzyl)-3-methylimidazolium tetrafluoroborate]-block-poly(N-isopropylacrylamide) (P[VBMI][BF₄]-b-PNIPAM) containing a hydrophilic poly(ionic liquid) block of P[VBMI][BF₄] is prepared by sequential reversible addition-fragmentation chain transfer (RAFT) polymerization. This P[VBMI][BF₄]-b-PNIPAM exhibits an abnormal thermoresponsive phase transition at a temperature above the phase transition temperature (PTT) of the PNIPAM block. For P[VBMI][BF₄]-b-PNIPAM including a short P[VBMI][BF₄] block, its aqueous solution becomes turbid at a temperature above the PTT of the thermoresponsive PNIPAM block, whereas for P[VBMI][BF₄]-b-PNIPAM containing a relatively long P[VBMI][BF₄] block even in the case of a relatively long PNIPAM block, the aqueous solution remains transparent at a temperature far above the PTT of the PNIPAM block, although a soluble-to-insoluble phase transition of the PINIPAM block is confirmed by dynamic light scattering (DLS) analysis and variable temperature ¹H NMR analysis. The reason that P[VBMI][BF₄]-b-PNIPAM exhibits an abnormal thermoresponse is discussed and ascribed to the highly hydrophilic and charged poly(ionic liquid) block of P[VBMI][BF₄] leading to the formation of small-sized micelles at a temperature above the PTT.

Fabrication of glucose-responsive and biodegradable copolymer membrane for controlled release of insulin at physiological pH

A PCL-b-PPBDEMA copolymer membrane can be used as an intelligent carrier to achieve the controlled release of insulin by adjusting the glucose concentration.

Polypeptide self-assemblies: nanostructures and bioapplications

Polypeptide copolymers can self-assemble into diverse aggregates. The morphology and structure of aggregates can be varied by changing molecular architectures, self-assembling conditions, and introducing secondary components such as polymers and nanoparticles. Polypeptide self-assemblies have gained significant attention because of their potential applications as delivery vehicles for therapeutic payloads and as additives in the biomimetic mineralization of inorganics. This review article provides an overview of recent advances in nanostructures and bioapplications related to polypeptide self-assemblies. We highlight recent contributions to developing strategies for the construction of polypeptide assemblies with increasing complexity and novel functionality that are suitable for bioapplications. The relationship between the structure and properties of the polypeptide aggregates is emphasized. Finally, we briefly outline our perspectives and discuss the challenges in the field.

Secondary structures of synthetic polypeptide polymers

Synthetic peptide-based polymers can fold into different secondary structures in the same way as do proteins. This review article presents how tuning the polypeptide secondary structure could be a key step to modulate various properties in advanced polymeric materials (size, rigidity, self-assembly,etc.).

Methionine-based cationic polypeptide/polypeptide block copolymer with triple-stimuli responsiveness: DNA polyplexation and phototriggered release

This work describes the synthesis of a multi-stimuli responsive methionine-based cationic polypeptide and its polypeptide block copolymer, followed by subsequent DNA polyplexation and phototriggered release.

Synthesis and Self-Assembled Behavior of pH-Responsive Chiral Liquid Crystal Amphiphilic Copolymers Based on Diosgenyl-Functionalized Aliphatic Polycarbonate

The morphological control of polymer micellar aggregates is an important issue in applications such as nanomedicine and material science. Stimuli responsive soft materials have attracted significant attention for their well-controlled morphologies. However, despite extensive studies, it is still a challenge to prepare nanoscale assemblies with responsive behaviors. Herein, a new chiral liquid crystal (LC) aliphatic polycarbonate with side chain bearing diosgenyl mesogen, named mPEG₄₃-PMCC₂₅-P(MCC-DHO)₁₅, was synthesized through the ring-opening polymerization and coupling reaction. The self-assembled behavior of the LC copolymer was explored. In aqueous solution, the functionalized copolymer could self-organize into different nanostructures with changing pH value, such as nanospheres and nanofibers. This would offer new possibilities in the design of nanostructured organic materials.

Self-assembled PEG-poly(l-valine) hydrogels as promising 3D cell culture scaffolds

Self-assembled polypeptide aggregates have shown great promise in biomedical fields including drug delivery, tissue regeneration and regenerative medicine. In this study, we report self-assembled hydrogels based on mPEG-block-poly(l-valine) (PEV) copolymers. PEV copolymers with varying poly(l-valine) chain lengths were prepared by the ring-opening polymerization of N-carboxy anhydrides of l-valine using mPEG-NH₂ as the initiator. ¹H NMR and GPC confirmed their well-defined chemical structures. FT-IR analysis and DSC curves indicated the combined α-helix and β-sheet secondary polypeptide conformation and the PEG crystallization microphase in bulk solid state, respectively. Moreover, the poly(l-valine) block restricted the crystallization of PEG segment. DLS, TEM and circular dichroism spectra were employed to study the self-assembly profiles of PEV copolymers in aqueous solution. The results manifested that in diluted solution, PEV copolymers showed a combination of typical β-sheet and α-helical polypeptide structures and self-assembled into nanostructures with diverse morphologies and sizes. For concentrated PEV solutions, clear hydrogel phases were observed and dynamic rheological analyses demonstrated that the hydrogel modulus was sensitive to the polypeptide length, angular frequency, shear strain and temperature. The hydrogel formation was possibly dominated by the physical aggregation of PEV nanoassemblies as well as driven by the formation of particular polypeptide secondary structures. Human fibroblast NIH/3T3 cells were encapsulated and cultured within the hydrogel scaffolds. The encapsulated cells exhibited high viability, suggesting that PEV hydrogels have excellent cytocompatibility and could be used as three-dimensional (3D) cell culture matrices. Collectively, self-assembled PEGylated poly(l-valine) conjugate hydrogels represented a new kind of biomaterial scaffold in biomedical fields including but not limited to 3D cell culture.

Thermoresponsive poly(2-oxazoline)s, polypeptoids, and polypeptides

Recent advances in thermoresponsive poly(2-oxazoline)s, polypeptoids, and polypeptides, with a specific focus on structure–property relationships, self-assembly, and applications, are reviewed.

Design and self-assembly of PBLG-b-ELP hybrid diblock copolymers based on synthetic and elastin-like polypeptides

The synthesis and self-assembly of amphiphilic copolypeptides containing a recombinant elastin-like polypeptide block used as a macroinitiator for the ROP of γ-BLG NCA are presented.

Temperature-Responsive Smart Nanocarriers for Delivery Of Therapeutic Agents: Applications and Recent Advances

Smart drug delivery systems (DDSs) have attracted the attention of many scientists, as carriers that can be stimulated by changes in environmental parameters such as temperature, pH, light, electromagnetic fields, mechanical forces, etc. These smart nanocarriers can release their cargo on demand when their target is reached and the stimulus is applied. Using the techniques of nanotechnology, these nanocarriers can be tailored to be target-specific, and exhibit delayed or controlled release of drugs. Temperature-responsive nanocarriers are one of most important groups of smart nanoparticles (NPs) that have been investigated during the past decades. Temperature can either act as an external stimulus when heat is applied from the outside, or can be internal when pathological lesions have a naturally elevated termperature. A low critical solution temperature (LCST) is a special feature of some polymeric materials, and most of the temperature-responsive nanocarriers have been designed based on this feature. In this review, we attempt to summarize recent efforts to prepare innovative temperature-responsive nanocarriers and discuss their novel applications.

Peptide self-assembly: thermodynamics and kinetics

Self-assembling systems play a significant role in physiological functions and have therefore attracted tremendous attention due to their great potential for applications in energy, biomedicine and nanotechnology. Peptides, consisting of amino acids, are among the most popular building blocks and programmable molecular motifs. Nanostructures and materials assembled using peptides exhibit important potential for green-life new technology and biomedical applications mostly because of their bio-friendliness and reversibility. The formation of these ordered nanostructures pertains to the synergistic effect of various intermolecular non-covalent interactions, including hydrogen-bonding, π-π stacking, electrostatic, hydrophobic, and van der Waals interactions. Therefore, the self-assembly process is mainly driven by thermodynamics; however, kinetics is also a critical factor in structural modulation and function integration. In this review, we focus on the influence of thermodynamic and kinetic factors on structural assembly and regulation based on different types of peptide building blocks, including aromatic dipeptides, amphiphilic peptides, polypeptides, and amyloid-relevant peptides.

Role of Side-Chain Molecular Features in Tuning Lower Critical Solution Temperatures (LCSTs) of Oligoethylene Glycol Modified Polypeptides

A series of thermoresponsive polypeptides has been synthesized using a methodology that allowed facile adjustment of side-chain functional groups. The lower critical solution temperature (LCST) properties of these polymers in water were then evaluated relative to systematic molecular modifications in their side-chains. It was found that in addition to the number of ethylene glycol repeats in the side-chains, terminal and linker groups also have substantial and predictable effects on cloud point temperatures (Tcp). In particular, we found that the structure of these polypeptides allowed for inclusion of polar hydroxyl groups, which significantly increased their hydrophilicity and decreased the need to use long oligoethylene glycol repeats to obtain LCSTs. The thioether linkages in these polypeptides were found to provide an additional structural feature for reversible switching of both polypeptide conformation and thermoresponsive properties.

Disk-like micelles with cylindrical pores from amphiphilic polypeptide block copolymers

An unprecedented 2-dimensional disk-like micelle with cylindrical pores was achieved by self-assembly of amphiphilic block copolypeptides PEG-b-PBLG with an α-helical conformation of PBLG blocks.

Biodegradable thermal- and redox-responsive poly(l-glutamate) with Y-shaped oligo(ethylene glycol) side-chain and tunable phase transition temperature

A series of poly(l-glutamate) bearing Y-shaped oligo(ethylene glycol)_x side-chains were synthesized via a combination of ROP and thiol–yne photoaddition. The polypeptides showed dual thermal and redox-responsive properties.

Extraordinary boundary morphologies of large-scale ordered domains of spheres in thin films of a narrowly dispersed diblock copolymer via thermodynamic control

Long-range ordering of body centered cubic (BCC) spheres and various extraordinary morphologies at the boundaries of the adjacent orderly oriented domains are observed in thermally annealed thin films of a series of specific narrowly dispersed diblock copolymers, poly(dimethylsiloxane)-b-poly{2,5-bis[(4-butoxyphenyl)oxycarbonylstyrene} (PDMS-b-PBPCS, DB). The series of asymmetrical DB block copolymers (BCPs) with volume fractions of PDMS (f(PDMS)'s) from 10% to 23% self-assemble into thermodynamically stable body centered cubic (BCC) nanostructures in bulk at ambient temperature after thermal annealing. The thin films of these BCPs with a relatively large film thickness on a carbon-film coated substrate are annealed in a vacuum at 180 °C for 3 days and are characterized by transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). For all thin films of these BCPs, micrometer-scale domains with a rectangular unit cell similar to the projection of the BCC lattice along the [110] direction to the substrate are observed. And the XPS results indicate that the surface layers of the thin films are composed of both PDMS and PBPCS blocks. For the thin films of the BCPs with f(PDMS) values of 10% and 13%, the neighboring [110]-oriented BCC domains match well with each other, and the boundaries are defect-free. For the thin film of the BCP with a f(PDMS) value of 23%, the PDMS spheres in the [110]-oriented BCC domains in the TEM micrograph are overlapped with each other, and interesting morphologies including defect-free interfaces, interfaces with line defects, and domains with defects and local ordering are observed at the boundaries of the neighboring [110]-oriented domains.

Reversible thermo-sensitivity induced from varying the hydrogen bonding between the side residues of rationally designed polypeptides

Rationally designed polypeptides with similar molecular structures but varying patterns of hydrogen bonding between the side groups have been synthesized and demonstrated to possess distinct solubility and thermal behaviors. Further balancing the ratio of both isopropylamine and ethylenediamine side groups endows the random copolymer with reversible thermo-sensitivity.

Design and synthesis of nonionic copolypeptide hydrogels with reversible thermoresponsive and tunable physical properties

Polypeptide-based formulations that undergo liquid to hydrogel transitions upon change in temperature have become desirable targets since they can be mixed with cells or injected into tissues as liquids, and subsequently transform into rigid scaffolds or depots. Such materials have been challenging to prepare using synthetic polypeptides, especially when reversible gelation and tunable physical properties are desired. Here, we designed and prepared new nonionic diblock copolypeptide hydrogels (DCH) containing hydrophilic poly(γ-[2-(2-methoxyethoxy)ethyl]-rac-glutamate) and hydrophobic poly(l-leucine) segments, named DCHEO, and also further incorporated copolypeptide domains into DCHEO to yield unprecedented thermoresponsive DCH, named DCHT. Although previous attempts to prepare nonionic hydrogels composed solely of synthetic polypeptides have been unsuccessful, our designs yielded materials with highly reversible thermal transitions and tunable properties. Nonionic, thermoresponsive DCHT were found to support the viability of suspended mesenchymal stem cells in vitro and were able to dissolve and provide prolonged release of both hydrophilic and hydrophobic molecules. The versatility of these materials was further demonstrated by the independent molecular tuning of DCHT liquid viscosity at room temperature and DCHT hydrogel stiffness at elevated temperature, as well as the DCHT liquid to hydrogel transition temperature itself.

Biodegradable stimuli-responsive polypeptide materials prepared by ring opening polymerization

This tutorial review summarizes the most recent progress in stimuli-responsive polypeptides over the past decade.

Thermo-responsive amino acid-based vinyl polymers showing widely tunable LCST/UCST behavior in water

A thermo-responsive polymer system showing widely tunable UCST/LCST behaviors from amino acid-based vinyl polymers.