Using the polymeric ouzo effect for the preparation of polysaccharide-based nanoparticles

Bidirectional Uptake, Transfer, and Transport of Dextran-Based Nanoparticles in Plants for Multidimensional Enhancement of Pesticide Utilization

The development of effective multifunctional nano-delivery approaches for pesticide absorption remains a challenge. Here, a dextran-based pesticide delivery system (MBD) is constructed to deliver tebuconazole for multidimensionally enhancing its effective utilization on tomato plants. Spherical MBD nanoparticles are obtained through two-step esterification of dextran, followed by tebuconazole loading using the Michael addition reaction. Confocal laser scanning microscopy shows that fluorescein isothiocyanate-labeled MBD nanoparticles can be bidirectionally transported in tomato plants and a modified quick, easy, cheap, effective, rugged, and safe-HPLC approach demonstrates the capacity to carry tebuconazole to plant tissues after 24 h of root uptake and foliar spray, respectively. Additionally, MBD nanoparticles could increase the retention of tebuconazole on tomato leaves by up to nearly 2.1 times compared with the tebuconazole technical material by measuring the tebuconazole content retained on the leaves. In vitro antifungal and pot experiments show that MBD nanoparticles improve the inhibitory effect of tebuconazole against botrytis cinerea by 58.4% and the protection against tomato gray molds by 74.9% compared with commercial suspensions. Furthermore, the MBD nanoparticles do not affect the healthy growth of tomato plants. These results underline the potential for the delivery system to provide a strategy for multidimensional enhancement of pesticide efficacy.

Simple elaboration of drug-SPION nanocapsules (hybridosomes®) by solvent shifting: Effect of the drug molecular structure and concentration

Drug nanocapsules coated with iron oxide nanoparticles (SPION) were elaborated by the simultaneous nanoprecipitation of the drug and the nanoparticles, through solvent shifting. We examined four drugs: sorafenib, sorafenib tosylate, α-tocopherol and paclitaxel, to cover the cases of molecular solids, ionic solids, and molecular liquids. We first investigated the formation of the drug core in the final mixture of solvents at different concentrations. A Surfactant-Free Micro-Emulsion domain (SFME, thermodynamically stable) was observed at low drug concentration and an Ouzo domain (metastable) at high drug concentration, except for the case of paclitaxel which crystallizes at high concentration without forming an Ouzo domain. When co-nanoprecipitated with the molecular drugs in the Ouzo domain (sorafenib or α-tocopherol), the SPION limited the coalescence of the drug particles to less than 100 nm, forming capsules with a drug encapsulation efficiency of ca 80 %. In contrast, larger capsules were formed from the SFME or when using the ionic form (sorafenib tosylate). Finally, the sorafenib-SPION capsules exhibit a similar chemotherapeutic effect as the free drug on the hepatocellular carcinoma in vitro.

Controlling Nano-to-Microscale Multilevel Architecture in Polymeric Microfibers through Polymerization-Induced Spontaneous Phase Separation

Hierarchically structured polymeric fibers, composed of structural nanoscale motifs that assemble into a microscale fiber are frequently found in natural fibers including cellulose and silk. The creation of synthetic fibers with nano-to-microscale hierarchical structures represents a promising avenue for the development of novel fabrics with distinctive physical, chemical, and mechanical characteristics. In this work, we introduce a novel approach for creating polyamine-based core-sheath microfibers with controlled hierarchical architectures. This approach involves a polymerization-induced spontaneous phase separation and subsequent chemical fixation. Through the use of various polyamines, the phase separation process can be manipulated to produce fibers with diverse porous core architectures, ranging from densely packed nanospheres to segmented "bamboo-stem" morphology. Moreover, the nitrogen-rich surface of the core enables both the chemisorption of heavy metals and the physisorption of proteins and enzymes. Our method offers a new set of tools for the production of polymeric fibers with novel hierarchical morphologies, which has a high potential for a wide range of applications such as filtering, separation, and catalysis.

Ouzo Effect Examined at the Nanoscale via Direct Observation of Droplet Nucleation and Morphology

Herein, we present the direct observation via liquid-phase transmission electron microscopy (LPTEM) of the nucleation and growth pathways of structures formed by the so-called "ouzo effect", which is a classic example of surfactant-free, spontaneous emulsification. Such liquid-liquid phase separation occurs in ternary systems with an appropriate cosolvent such that the addition of the third component extracts the cosolvent and makes the other component insoluble. Such droplets are homogeneously sized, stable, and require minimal energy to disperse compared to conventional emulsification methods. Thus, ouzo precipitation processes are an attractive, straightforward, and energy-efficient technique for preparing dispersions, especially those made on an industrial scale. While this process and the resulting emulsions have been studied by numerous indirect techniques (e.g., X-ray and light scattering), direct observation of such structures and their formation at the nanoscale has remained elusive. Here, we employed the nascent technique of LPTEM to simultaneously evaluate droplet growth and nanostructure. Observation of such emulsification and its rate dependence is a promising indication that similar LPTEM methodologies may be used to investigate emulsion formation and kinetics.

Poly(succinimide) nanoparticles as reservoirs for spontaneous and sustained synthesis of poly(aspartic acid) under physiological conditions: potential for vascular calcification therapy and oral drug delivery

This paper describes the preparation of poly(succinimide) nanoparticles (PSI NPs) and investigates their properties and characteristics. Employing direct and inverse precipitation methods, stable PSI NPs with tunable size and narrow dispersity were prepared without the use of any stabilizer or emulsifier. It was demonstrated that PSI NPs convert to poly(aspartic acid) (PASP) gradually under physiological conditions (37 °C, pH 7.4), while remaining stable under mildly acidic conditions. The dissolution profile was tuned and delayed by chemical modification of PSI. Through grafting a fluorophore to the PSI backbone, it was also demonstrated that such a spontaneous conversion could offer great potential for oral delivery of therapeutic agents to the colon. Sustained PASP synthesis also contributed to a sustained reduction of reactive oxygen species induced by iron. Furthermore, PSI NPs effectively prevented in vitro calcification of smooth muscle cells. This was attributed to the chelation of calcium ions to PASP, thereby inhibiting calcium deposition, because under cell culture conditions PSI NPs serve as reservoirs for the sustained synthesis of PASP. Overall, this study sheds light on the preparation and features of biocompatible and biodegradable PSI-based NPs and paves the way for further research to discover as-yet unfulfilled potential of this polymer in the form of nanoparticles.

Synthesis of ultrasmall metal nanoparticles and continuous shells at the liquid/liquid interface in Ouzo emulsions

Herein, we report a novel method to synthesize metal nanoparticle-shells (NP-shells) and continuous shells at the liquid/liquid interface, via an interfacial reaction in an Ouzo emulsion. Ouzo emulsions spontaneously form submicronic droplets with a narrow size distribution, without any energy-intensive process. The Ouzo system in this work comprises water, tetrahydrofuran (THF) and butylated hydroxytoluene (BHT), and forms BHT-rich droplets (∼100 nm). The addition of a reducing agent (NaBH₄) in the aqueous phase, and of a metal precursor (AuPPh₃Cl and/or Pd(PPh₃)₂Cl₂) in the BHT-rich droplets, results in the formation of Au nanoparticles (AuNPs), continuous Pd shells, or bimetallic shells, at the interface of the droplets. Control over the NP-shell size was achieved by the addition of a water-soluble polymer during the synthesis, which in turn leads to smaller NP-shells.

Continuous Nanoprecipitation of Polycaprolactone in Additively Manufactured Micromixers

The polymeric ouzo effect is an energy-efficient and robust method to create nanoparticles with biologically degradable polymers. Usually, a discontinuous or semi-continuous process is employed due to its low technical effort and the fact that the amount of dispersions needed in a laboratory is relatively small. However, the number of particles produced in this method is not enough to make this process economically feasible. Therefore, it is necessary to improve the productivity of the process and create a controllable and robust continuous process with the potential to control parameters, such as the particle size or surface properties. In this study, nanoparticles were formulated from polycaprolactone (PCL) in a continuous process using additively manufactured micromixers. The main goal was to be able to exert control on the particle parameters in terms of size and zeta potential. The results showed that particle size could be adjusted in the range of 130 to 465 nm by using different flow rates of the organic and aqueous phase and varying concentrations of PCL dissolved in the organic phase. Particle surface charge was successfully shifted from a slightly negative potential of −14.1 mV to a negative, positive, or neutral value applying the appropriate surfactant. In summary, a continuous process of nanoprecipitation not only improves the cost of the method, but furthermore increases the control over the particle’s parameters.

Shining Light on Polymeric Drug Nanocarriers with Fluorescence Correlation Spectroscopy

The use of nanoparticles as carriers is an extremely promising way for administration of therapeutic agents, such as drug molecules, proteins and nucleic acids. Such nanocarriers (NCs) can increase the solubility of hydrophobic compounds, protect their cargo from the environment, and if properly functionalized, deliver it to specific target cells and tissues. Polymer-based NCs are especially promising, because they offer high degree of versatility and tunability. However, in order to get a full advantage of this therapeutic approach and develop efficient delivery systems, a careful characterization of the NCs is needed. This Feature Article highlights the fluorescence correlation spectroscopy (FCS) technique as a powerful and versatile tool for NCs characterization at all stages of the drug delivery process. In particular, FCS can monitor and quantify the size of the NCs and the drug loading efficiency after preparation, the NCs stability and possible interactions with, e.g., plasma proteins in the blood stream and the kinetic of drug release in the cytoplasm of the target cells. This article is protected by copyright. All rights reserved.

Encapsulation of volatile compounds in liquid media: Fragrances, flavors, and essential oils in commercial formulations

The first marketed example of the application of microcapsules dates back to 1957. Since then, microencapsulation techniques and knowledge have progressed in a plethora of technological fields, and efforts have been directed toward the design of progressively more efficient carriers. The protection of payloads from the exposure to unfavorable environments indeed grants enhanced efficacy, safety, and stability of encapsulated species while allowing for a fine tuning of their release profile and longer lasting beneficial effects. Perfumes or, more generally, active-loaded microcapsules are nowadays present in a very large number of consumer products. Commercial products currently make use of rigid, stable polymer-based microcapsules with excellent release properties. However, this type of microcapsules does not meet certain sustainability requirements such as biocompatibility and biodegradability: the leaking via wastewater contributes to the alarming phenomenon of microplastic pollution with about 4% of total microplastic in the environment. Therefore, there is a need to address new issues which have been emerging in relation to the poor environmental profile of such materials. The progresses in some of the main application fields of microencapsulation, such as household care, toiletries, cosmetics, food, and pesticides are reviewed herein. The main technologies employed in microcapsules production and the mechanisms underlying the release of actives are also discussed. Both the advantages and disadvantages of every technique have been considered to allow a careful choice of the most suitable technique for a specific target application and prepare the ground for novel ideas and approaches for encapsulation strategies that we expect to be proposed within the next years.

Rational Design of Sustainable Liquid Microcapsules for Spontaneous Fragrance Encapsulation

The high volatility, water-immiscibility, and light/oxygen-sensitivity of most aroma compounds represent a challenge to their incorporation in liquid consumer products. Current encapsulation methods entail the use of petroleum-based materials, initiators, and crosslinkers as well as mixing, heating, and purification steps. Hence, more efficient and eco-friendly approaches to encapsulation must be sought. Herein, we propose a simple method by making use of a pre-formed amphiphilic polymer and employing the Hansen Solubility Parameters approach to determine which fragrances could be encapsulated by spontaneous coacervation in water. The coacervates do not precipitate as solids but they remain suspended as colloidally stable liquid microcapsules, as demonstrated by fluorescence correlation spectroscopy. The effective encapsulation of fragrance is proven through confocal Raman spectroscopy, while the structure of the capsules is investigated by means of cryo FIB/SEM, confocal laser scanning microscopy, and small-angle X-ray scattering.

Ouzo phase occurrence with alternating lipo/hydrophilic copolymers in water

Selection of monomer couples, ensuring reactivity ratios close to zero, is an effective strategy to induce spontaneous copolymerization into an alternating sequence. In addition, monomer design and customisation of the solvent-monomer interactions open the way to functional copolymers showing molecular self-assembly relevant to their regular amphipathic structure. In this work, we show that the design of comonomers with adequate reactivities and interactions can be used to direct copolymer self-assembly on a mesoscopic scale. We investigate spontaneous formation of nanoparticles through solvent/non-solvent interactions using the so-called "ouzo effect". In this way, an ouzo diagram was built to determine the operation window for the self-assembly, in aqueous suspensions, of alternating copolymers consisting of vinyl phenol and maleimide units carrying long alkyl-pendant groups (C₁₂H₂₅ or C₁₈H₃₇). Also, investigations were pursued to account for the influence of the lateral lipophilic pendant units on the size and structure of the nanoaggregates formed during one-shot water addition. Structure characterisation by light scattering techniques (DLS and SLS), small-angle neutron scattering (SANS) and transmission electron microscopy (cryo-TEM and TEM) confirmed the self-assembly of copolymer chains into nanoparticles (size range: 60-300 nm), the size of which is affected by the lipophilicity of the alternating copolymers, solvent-water affinity and the solvent diffusion in water. Altogether, we present here the spontaneous ouzo effect as a simple method to produce stable alternating copolymer nanoparticles in water without the addition of stabilizing agents.

Nanoprecipitation as a simple and straightforward process to create complex polymeric colloidal morphologies

Polymeric nanoparticles are highly important functional nanomaterials for a large range of applications from therapeutics to energy. Advances in nanotechnology have enabled the engineering of multifunctional polymeric nanoparticles with a variety of shapes and inner morphologies. Thanks to its inherent simplicity, the nanoprecipitation technique has progressively become a popular approach to construct polymeric nanoparticles with precise control of nanostructure. The present review highlights the great capability of this technique in controlling the fabrication of various polymeric nanostructures of interest. In particular, we show here how the nanoprecipitation of either block copolymers or mixtures of homopolymers can afford a myriad of colloids displaying equilibrium (typically onion-like) or out-of-equilibrium (stacked lamellae, porous cores) morphologies, depending whether the system "freezes" while passing the glass transition or crystallization point of starting materials. We also show that core-shell morphologies, either from polymeric or oil/polymer mixtures, are attainable by this one-pot process. A final discussion proposes new directions to enlarge the scope and possible achievements of the process.

Investigating the Viability of Epithelial Cells on Polymer Based Thin-Films

The development of novel polymer-based materials opens up possibilities for several novel applications, such as advanced wound dressings, bioinks for 3D biofabrication, drug delivery systems, etc. The aim of this study was to evaluate the viability of vascular and intestinal epithelial cells on different polymers as a selection procedure for more advanced cell-polymer applications. In addition, possible correlations between increased cell viability and material properties were investigated. Twelve polymers were selected, and thin films were prepared by dissolution and spin coating on silicon wafers. The prepared thin films were structurally characterized by Fourier transform infrared spectroscopy, atomic force microscopy, and goniometry. Their biocompatibility was determined using two epithelial cell lines (human umbilical vein endothelial cells and human intestinal epithelial cells), assessing the metabolic activity, cell density, and morphology. The tested cell lines showed different preferences regarding the culture substrate. No clear correlation was found between viability and individual substrate characteristics, suggesting that complex synergistic effects may play an important role in substrate design. These results show that a systematic approach is required to compare the biocompatibility of simple cell culture substrates as well as more complex applications (e.g., bioinks).

Examining the Temperature Dependence of Louche Formation in Absinthe

Absinthe is an anise-flavored alcohol that is typically served by adding cold water to form a cloudy green louche, similar to the cloudy white louche of ouzo. This microemulsion formation, due to the competing interactions within the oil-alcohol-water system, has been termed the ouzo effect. Previous work has examined the ternary oil-alcohol-water phase diagram in ouzo and limoncello. Additional work has also characterized the droplet size and stability of microemulsions in ouzo, limoncello, and pastis. However, less work has been done to examine the effect of temperature on louche formation despite the fact that the louche is traditionally formed by adding ice cold water. This work demonstrates that both the maximum turbidity and the fraction of alcohol at maximum turbidity are temperature-dependent. The louche formation can be fit with a logistic curve, and the resulting fit parameters are linear with temperature. Optical images show that the increased turbidity correlates with an increase in the number of droplets in the microemulsion.

Reactive Nanoparticles Derived from Polysaccharide Phenyl Carbonates

Polysaccharide (PS) based nanoparticles (NP) are of great interest for biomedical applications. A key challenge in this regard is the functionalization of these nanomaterials. The aim of the present work was the development of reactive PS-NP that can be coupled with an amino group containing compounds under mild aqueous conditions. A series of cellulose phenyl carbonates (CPC) and xylan phenyl carbonates (XPC) with variable degrees of substitution (DS) was obtained by homogeneous synthesis. The preparation of PS-NP by self-assembling of these hydrophobic derivatives was studied comprehensively. While CPC mostly formed macroscopic aggregates, XPC formed well-defined spherical NP with diameters around 100 to 200 nm that showed a pronounced long-term stability in water against both particle aggregation as well as cleavage of phenyl carbonate moieties. Using an amino group functionalized dye it was demonstrated that the novel XPC-NP are reactive towards amines. A simple coupling procedure was established that enables direct functionalization of the reactive NP in an aqueous dispersion. Finally, it was demonstrated that dye functionalized XPC-NP are non-cytotoxic and can be employed in advanced biomedical applications.

Nanoemulsions for synthesis of biomedical nanocarriers

Nanoemulsions are kinetically stabilized emulsions with droplet sizes in the nanometer scale. These nanodroplets are able to confine spaces in which reactions of polymerization or precipitation can take place, leading to the formation of particles and capsules that can act as nanocarriers for biomedical applications. This review discusses the different possibilities of using nanoemulsions for preparing biomedical nanocarriers. According to the chemical nature, nanocarriers prepared in nanoemulsions are classified in polymeric, inorganic, or hybrid. The main synthetic strategies for each type are revised, including miniemulsion polymerization, nanoemulsion-solvent evaporation, spontaneous emulsification, sol-gel processes, and combination of different techniques to form multicomponent materials.

Ouzo Column under Impact: Formation of Emulsion Jet and Oil-Lubricated Droplet

We investigated the dynamics of a liquid column consisting of ouzo emulsion under the impact generated when the liquid container lands on a hard ground. At a cavitation number of 0.36, where cavitation is expected to occur, our high-speed videography captured the traveling jet and cavitation bubbles while the oil microdroplets in ouzo after different runs of impact were visualized by an optical microscope. Importantly, the impact on an ouzo column can eject a focused jet of the emulsion and deposit a small volume of emulsion on a solid substrate. As revealed by our still photography, the deposited emulsion formed an oil-lubricated drop immediately. Our findings have implications for jetting applications such as inkjet printing of emulsions or fast deposition of self-lubricating drops for assembling supraparticles. We also discuss the jet formation mechanism in terms of the existence of oil microdroplets.

Polysaccharide nanoparticles: from fabrication to applications

The present review highlights the developments in polysaccharide nanoparticles with a particular focus on applications in biomedicine, cosmetics and food.

Entrapment of Hydrophobic Biocides into Cellulose Acetate Nanoparticles by Nanoprecipitation

This contribution reports an efficient method for the production and use of biocide-loaded cellulose acetate nanoparticles. As well-known model biocides 4-Hexylresorcinol and Triclosan were used for in situ nanoparticle loading during a nanoprecipitation process. We show that the nanoparticle size can be well-controlled by variation of the cellulose acetate concentration during nanoprecipitation. Apart from strong evidence suggesting cellulose acetate particle formation according to a nucleation-aggregation mechanism, we further show that the biocide loading of the particles occurs by a diffusion process and not via co-precipitation. The quantity of particle loading was analyzed by ¹H-NMR spectroscopy of re-dissolved nanoparticles, and it was observed that a decisive factor for high packaging efficiency is the use of a biocide with low water solubility and high hydrophobicity. SEM studies showed no influence on the particle morphology or size by both biocides 4-Hexylresorcinol and Triclosan. Finally, an aqueous nanoparticle dispersion can be coated onto model paper sheets to yield pronounced antimicrobial surface-properties. Nanoparticles loaded with the biocide Triclosan showed a high antimicrobial activity against Bacillus subtilis, a cellulase producing bacteria, if applied to model paper substrates, even at extremely low coating weights of 1-5 g/m², respectively. Additional long-term efficacy renders these nanoparticles ideal for various applications.

Nanoparticles Based on Hydrophobic Polysaccharide Derivatives-Formation Principles, Characterization Techniques, and Biomedical Applications

Polysaccharide (PS) nanoparticles (NP) are fascinating materials that combine huge application potential with the unique beneficial features of natural biopolymers. Different types of PS-NP can be distinguished depending on the basic preparation principles (top-down vs bottom-up vs coating of nanomaterials) and the material from which they are obtained (native PS vs chemically modified PS derivatives vs nanocomposites). This review provides a comprehensive overview of an approach towards PS-NP that has gained rapidly increasing interest within the last decade; the nanoself-assembling of hydrophobic PS derivatives. This facile process is easy to perform and offers a broad structural diversity in terms of the PS backbone and the additional functionalities that can be introduced. Fundamental principles of different NP preparation techniques along with useful characterization methods are presented in this work. A comprehensive summary of PS-NP prepared by different techniques and with various PS backbones and types/amounts of hydrophobic substituents is given. The intention is to demonstrate how different parameters determine the size, size distribution, and zeta-potential of the particles. Moreover, application trends in biomedical areas are highlighted in which tailored functional PS-NP are evaluated and constantly developed further.

Self-Assembled Nanostructures of Red Fluorescent Amphiphilic Block Copolymers as Both Imaging Probes and Drug Carriers

We report a red-fluorescent drug delivery system formed by biodegradable and biocompatible amphiphilic A-B-A block copolymers. Each polymer consists of a red fluorescent dye covalently bonded in the middle of hydrophobic block (B) of polylactone, tethered at both ends with poly[(oligo ethylene glycol) methyl ether methacrylate] (POEGMA) as the hydrophilic block. Two types of polylactones, i.e., semicrystalline poly(ε-caprolactone) (PCL) and amorphous poly(δ-decalactone) (PDL), respectively, were incorporated as the hydrophobic segment in the block copolymers. Using transmission electron microscopy, we characterized the self-assembled nanostructures formed by these amphiphilic block copolymers in mixtures of water/tetrahydrofuran or water/dimethylformamide. All of these polymers remained highly fluorescent in water, although some extent of aggregation-induced fluorescence quenching was still observed. Among the three types of polymers presented here, the polymer (RPO-3) containing an amorphous block of PDL showed the highest drug-loading capacity and the largest extent of drug release in acidic media. RPO-3 micelles loaded with doxorubicin as a model of anticancer drug showed sustainable intracellular release and cytotoxicity against HeLa cells.

Synthesis of xylan carbonates - An approach towards reactive polysaccharide derivatives showing self-assembling into nanoparticles

Xylan phenyl carbonate (XPC) derivatives were prepared and characterized comprehensively. By conversion of xylan with phenyl chloroformate either in dipolar aprotic solvents with LiCl or in an ionic liquid, XPC with degrees of substitution (DS) of up to 2.0, i.e., fully functionalized derivatives, could be obtained. The synthesis was studied with respect to the influence of different reaction parameters. It was found that the reaction medium as well as the type of starting xylan strongly affected the efficiency of the derivatization. The derivatives obtained were characterized by FT-IR- and NMR spectroscopy. Surprisingly, it was found that C-3 is the most reactive position in this particular reaction while substitution in position C-2 only occurred if the neighboring position C-3 already carried a phenyl carbonate group. XPC were found to form spherical nanoparticles (NP) of well-defined shape with diameters around 158 nm. These materials possess unique potential as activated NP for advanced applications.

Transparent Silk Fibroin Microspheres from Controlled Droplet Dissolution in a Binary Solution

Silk is a natural polymer with a broad range of potential applications in textiles, advanced materials, biomedical devices, and drug delivery. The ability to control the morphology and assembly of silk fibroin is essential for the fabrication of silk-based structured materials. Here, we report an effective and simple approach based on droplet dissolution for weaving silk fibroin into spheres of several hundred micrometers in diameter. The spheres possess regular wrinkled microstructures on the surface and switchable transparency for visible light. To produce these silk spheres, we immersed a sessile microdrop of the silk fibroin aqueous solution in a surrounding phase of ethanol in toluene at low concentration (<10%). The droplet experienced a two-phase process: the first phase of volume expansion due to the intake of organic solvents from the surrounding phase and the second phase of droplet dissolution. The dissolution rate is closely related to the dynamics of the droplet, while the resulting microstructure of the silk microsphere is simply adjusted by the composition of the surrounding solution. At high concentrations of ethanol, silk fibroin formed a thin shell around the droplet during the initial expansion of the droplet in volume. As the droplet shrank at a later stage, the shell around the droplet wrinkled and crumpled, leading to regular ridges and crevices on the microsphere surface. This work demonstrates that controlled droplet dissolution may be explored as a novel and effective way to tailor microstructures of silk assemblies. The as-prepared silk microspheres may be potentially used as optical units or microcarriers.

Ginkgo biloba extracts-loaded starch nano-spheres: Preparation, characterization, and in vitro release kinetics

Ginkgo as a promising edible material and herbal medicine has received much attention due to its abundant starch contents and functional ingredient ginkgo biloba extracts (GBEs). Many foreign scholars suggest that GBEs can effectively ameliorate the symptoms of mild memory impairment and Alzheimer's dementia. However, an insurmountable problem with application of the GBEs is its low bioavailability, which restricts its application in vivo. Considering the biocompatibility between GBEs and starch, we have prepared ginkgo and corn starch-based nano-carriers, and thereby loaded GBEs onto starch nano-spheres (SNPs) by nanoprecipitation. Compared with unloaded SNPs (201-250nm), the mean sizes of the monodispersed and spherical GBEs-loaded SNPs were 255-396nm. Moreover, the loading amounts of GBEs onto ginkgo, and corn SNPs were 0.661-1.045, and 0.560mg/mg, respectively. In addition, in artificial gastric and intestinal juices, the GBEs-loaded SNPs exhibited a better sustained release than free GBEs.

Formation of surface nanodroplets facing a structured microchannel wall

Surface nanodroplets are important units for lab-on-a-chip devices, compartmentalised catalytic reactions, high-resolution near-field imaging, and many others. Solvent exchange is a simple solution-based bottom-up approach for producing surface nanodroplets by displacing a good solvent of the droplet liquid by a poor one in a narrow channel in the laminar regime. The droplet size is controlled by the solution composition and the flow conditions during the solvent exchange. In this paper, we investigated the effects of local microfluidic structures on the formation of surface nanodroplets. The microstructures consist of a microgap with a well-defined geometry, embedded on the opposite microchannel wall, facing the substrate where nucleation takes place. For a given channel height, the dimensionless control parameters were the Peclet number of the flow, the ratio between the gap height and the channel height, and the aspect ratio between the gap length and the channel height. We found and explained three prominent features in the surface nanodroplet distribution at the surface opposite to the microgap: (i) enhanced volume of the droplets; (ii) asymmetry as compared to the location of the gap in the spatial droplet distribution with increasing Pe; (iii) reduced exponent of the effective scaling law of the droplet size with Pe. The droplet size also varied with the aspect and height ratios of the microgap at a given Pe value. Our simulations of the profile of oversaturation in the channel reveal that the droplet size distribution may be attributed to the local flow patterns induced by the gap. Finally, in a tapered microchannel, a gradient of surface nanodroplet size was obtained. Our work shows the potential for controlling nanodroplet size and spatial organization on a homogeneous surface in a bottom-up approach by simple microfluidic structures.

Tailoring the supramolecular structure of amphiphilic glycopolypeptide analogue toward liver targeted drug delivery systems

Amphiphilic glycopolypeptide analogues have harboured great importance in the development of targeted drug delivery systems. In this study, lactosylated pullulan-graft-arginine dendrons (LP-g-G3P) was synthesized using Huisgen azide-alkyne 1,3-dipolar cycloaddition between lactosylated pullulan and generation 3 arginine dendrons bearing Pbf and Boc groups on the periphery. Hydrophilic lactosylated pullulan was selected for amphiphilic modification, aiming at specific lectin recognition. Macromolecular structure of LP-g-G3P combined alkyl, aromatic, and peptide dendritic hydrophobic moieties and was able to self-assemble spontaneously into core-shell nanoarchitectures with small particle sizes and low polydispersity in the aqueous media, which was confirmed by CAC, DLS and TEM. Furthermore, the polyaromatic anticancer drug (doxorubicin, DOX) was selectively encapsulated in the hydrophobic core through multiple interactions with the dendrons, including π-π interactions, hydrogen bonding and hydrophobic interactions. Such multiple interactions had the merits of enhanced drug loading capacity (16.89±2.41%), good stability against dilution, and excellent sustained release property. The cell viability assay presented that LP-g-G3P nanoparticles had an excellent biocompatibility both in the normal and tumor cells. Moreover, LP-g-G3P/DOX nanoparticles could be effectively internalized into the hepatoma carcinoma cells and dramatically inhibited cell proliferation. Thus, this approach paves the way to develop amphiphilic and biofunctional glycopolypeptide-based drug delivery systems.

Agarose and Its Derivatives as Supports for Enzyme Immobilization

Agarose is a polysaccharide obtained from some seaweeds, with a quite particular structure that allows spontaneous gelation. Agarose-based beads are highly porous, mechanically resistant, chemically and physically inert, and sharply hydrophilic. These features-that could be further improved by means of covalent cross-linking-render them particularly suitable for enzyme immobilization with a wide range of derivatization methods taking advantage of chemical modification of a fraction of the polymer hydroxyls. The main properties of the polymer are described here, followed by a review of cross-linking and derivatization methods. Some recent, innovative procedures to optimize the catalytic activity and operational stability of the obtained preparations are also described, together with multi-enzyme immobilized systems and the main guidelines to exploit their performances.

Fabrication of Two-Dimensional Arrays of Diameter-Tunable PS-b-P2VP Nanowires at the Air/Water Interface

Composite thin films with well-defined and parallel nanowires were fabricated from the binary blends of a diblock copolymer polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) and several homopolystyrenes (h-PSs) at the air/liquid interface through a facile technique, which involves solution self-assembly, interface adsorption, and further self-organization processes. It was confirmed that the nanowires that appeared at the air/water interface came from the cylindrical micelles formed in solution. Interestingly, the diameters of the nanowires are uniform and can be tuned precisely from 45 to 247 nm by incorporating the h-PS molecules into the micellar core. This parallel alignment of the nanowires has potential applications in optical devices and enables the nanowires to be used as templates to prepare functional nanostructures. The extent to which h-PS molecules with different molecular weights are able to influence the diameter control of the nanowires was also systematically investigated.

Silica Ouzo Effect: Amphiphilic Drugs Facilitate Nanoprecipitation of Polycondensed Mercaptosilanes

Amphiphilic drugs are therapeutic agents whose molecular structures contain both hydrophobic and hydrophilic portions. Here we report a systematic study on how amphiphilic drugs can assist in silica nanoprecipitation. 3-Mercaptopropyltrimethoxysilane (MPTMS) was used as the sole silica material and 12 amphiphilic drugs spanning a wide spectrum of therapeutic categories were included. MPTMS polycondensation was conducted in a DMSO-based organic phase. After a sufficient time, particle formation was induced by injecting a small amount of the organic phase into a water solution containing various amphiphiles. The results show that all amphiphilic drugs studied exerted concentration-dependent facilitating effect on nanoparticle formation. Under certain preparation conditions, the particle solution showed physical stability over a long period and the formed particles could be as small as 100 nm. By systematically varying drug concentrations and injection volumes, the ability of each amphiphile to promote nanoprecipitation can be quantified and compared, based on two novel indices: the area under the critical volume-concentration curve (AUC) and the critical stabilization concentration (CSC). We demonstrate that both ability indices significantly correlated with the drug's log P and critical micelle concentrations (CMC). Furthermore, we have optimized the aging and particle purification condition and extensively characterized our system through comprehensive TEM and zeta-potential measurements, as well as determinations for drug entrapment and release. In conclusion, we have established a quantitative structure-activity relationship for amphiphilic small-molecular drugs in their ability to interact with poly(mercaptopropyl)silsesquioxane species and form nanoparticles via solvent shifting. We speculate that both hydrophobic and electrostatic interactions play important roles in the formation and stabilization of nanoparticles.

Stimuli-responsive nanoparticles from ionic cellulose derivatives

Stimuli-responsive nanoparticles (NPs) based on sustainable polymeric feedstock still need more exploration in comparison with NPs based on synthetic polymers. In this report, stimuli-responsive NPs from novel ionic cellulose derivatives were prepared via a facile nanoprecipitation. Cellulose 10-undecenoyl ester (CUE) with a degree of substitution (DS) of 3 was synthesized by esterification of cellulose with 10-undecenoyl chloride. Then, CUE was modified by photo-induced thiol-ene reactions, in order to obtain organo-soluble ionic cellulose derivatives with DSs of ∼3, namely cellulose 11-((3-carboxyl)ethylthio)undecanoate (CUE-MPA), cellulose 11-((2-aminoethyl)thio)undecanoate (CUE-CA), cellulose 11-(2-(2-(diethylamino)ethyl)thio)undecanoate (CUE-DEAET) and cellulose 11-(2-(2-(dimethylamino)ethyl)thio)undecanoate (CUE-DMAET). CUE-MPA could be transformed into NPs with average diameters in the range of 80-330 nm, but these NPs did not show particular stimuli-responsive properties. Moreover, the dropping technique resulted in smaller NPs than a dialysis technique. Stable NPs with average diameters in the range of 90-180 nm showing pH-responsive and switchable sizes were obtained from CUE-DEAET and CUE-DMAET possessing tertiary amines using nanoprecipitation. Thus, altering the terminal functional groups will be a new approach to prepare stimuli-responsive cellulose-derived polymeric NPs.

Solvent Effects on the Formation of Surface Nanodroplets by Solvent Exchange

Solvent exchange is a simple process to form oil nanodroplets at solid-liquid interfaces with well-defined location and morphology. In this process, a good solvent of the oil is displaced by a poor solvent, leading to the nucleation and growth of oil droplets from a transient oversaturation at the mixing front. Our recent work has shown that the final volume of the droplets is related to the flow conditions. In this work, we investigate the effects of the type and the composition of solvents on the droplet formation under the same flow conditions. Water nanodroplets were produced by ethanol/cyclohexane (solution A) and cyclohexane (solution B) on a hydrophilic substrate. We found that the droplet size increases first and then decreases with an increase of the initial ethanol concentration in solution A. This is attributed to the phase separation of ethanol-cyclohexane-water; in particular, the composition of solution A on the phase boundary above the Ouzo region. The same reason also contributes to the lower efficiency in droplet formation for a longer alkane. The important implication from this work is that the maximal droplet volume is limited by the phase separation of the solvents used in the solvent exchange.

The role of solvent swelling in the self-assembly of squalene based nanomedicines

Squalene based nanoparticles obtained via nanoprecipitation are promising candidates as efficient anti-cancer drugs. In order to highlight their preparation process and to facilitate further clinical translation, the present study enlightens the paramount role of the solvent in the formation of these nanomedicines. Three different squalene-based nanoparticles, i.e. squalenic acid, deoxycytidine squalene and gemcitabine squalene, have been investigated before and after organic solvent evaporation. Size and structural analysis by Small Angle Neutron Scattering revealed that droplets' size was uniquely controlled by the solvent composition (ethanol-water), which evolved during their gradual formation. The particles were preferably swollen by water and the swelling increased when less ethanol was present. Either coalescence or fragmentation was observed depending on the increase or decrease of the ethanol content, supporting an equilibrium control of the size. Moreover, a high water swelling was observed for the three local organization of the nanodroplets (hexagonal for gemcitabine squalene, cubic for deoxycytidine and not structured for squalenic acid) and could be the source of the previously reported efficiency of related anti-cancer squalene based nanomedicines.

Synthesis of polyurea–polyether nanoparticles via spontaneous nanoprecipitation

Synthesis of polyurea–polyether core–shell nano-particles via spontaneous precipitation.

Nanobubble formation on a warmer substrate

The solvent exchange procedure is an often-used protocol to produce surface nanobubbles. In this procedure, the substrate is exposed to a good solvent for gas which is then mixed and rinsed with a poor solvent for gas and the nanobubbles form on the solid-liquid interface. Here we study the effects of temperatures of the substrate and the first solvent on nanobubble formation. Atomic force microscopy with temperature control was used to examine the formation of nanobubbles at temperatures between 37 °C and 54 °C. It was found that the probability of nanobubble formation was larger on substrates at higher temperatures. Moreover, on warmer substrates we found nanobubbles with lateral extensions up to 8 μm. A morphologic analysis shows that all nanobubbles, including giant nanobubbles, have a similar aspect ratio, independent of the substrate temperature, and that this aspect ratio corresponds to a contact angle between 13° and 22° (on the gas side), much smaller than the macroscopic counterparts. We finally discuss the implications of our results for various theories on nanobubble stability.

From nanodroplets by the ouzo effect to interfacial nanolenses

Polymerizing nanodroplets at solid-liquid interfaces is a facile solution-based approach to the functionalization of large surface areas with polymeric lens-shaped nanostructures. In this work, we have applied a one-pot approach to obtain polymeric nanolenses with controlled sizes and densities. We take advantage of the formation mechanism by the direct adsorption of nanodroplets from a surfactant-free microemulsion onto an immersed hydrophobic substrate. The interfacial nanodroplets were photopolymerized to produce polymeric nanolenses on the substrate surface. The surfactant-free microemulsion of the monomer nanodroplets was obtained through the spontaneous emulsification (i.e., ouzo effect) in the tertiary system of ethanol, water, and precusor monomer. The size of nanolenses on the surface was adjusted by the nanodroplet size, following a linear relationship with the ratio of the components in the microemulsion. This simple approach is applicable to produce nanolenses over the entire surface area or on any specific area at will by depositing a drop of the microemulsion. Possessing high optical transparency, the resulting substrates may have potential application as functional biomedical supporting materials or effective light-harvesting coatings.

Nanoparticles from renewable polymers

The use of polymers from natural resources can bring many benefits for novel polymeric nanoparticle systems. Such polymers have a variety of beneficial properties such as biodegradability and biocompatibility, they are readily available on large scale and at low cost. As the amount of fossil fuels decrease, their application becomes more interesting even if characterization is in many cases more challenging due to structural complexity, either by broad distribution of their molecular weights (polysaccharides, polyesters, lignin) or by complex structure (proteins, lignin). This review summarizes different sources and methods for the preparation of biopolymer-based nanoparticle systems for various applications.

Versatile synthesis of thiol- and amine-bifunctionalized silica nanoparticles based on the ouzo effect

In this article, we report a novel, nanoprecipitation-based method for preparing silica nanoparticles with thiol and amine cofunctionalization. (3-Mercaptopropyl)trimethoxysilane (MPTMS) and 3-aminopropyltrimethoxysilane (APTMS) were used as the organosilane precursors, which were subjected to acid-catalyzed polycondensation in an organic phase containing a water-miscible solvent (e.g., dimethyl sulfoxide). A pale colloidal solution could be immediately formed when the preincubated organic phase was directly injected into water. The initial composition ratio between MPTMS and APTMS is an important factor governing the formation of nanoparticles. Specifically, large, unstable micrometer-sized particles were formed for preparation using MPTMS as the sole silane source. In contrast, when APTMS was used alone, no particles could be formed. By reducing the fraction of APTMS (or increasing that of MPTMS) in the initial mixture of organosilanes, the formation of nanometer-sized particles occurred at a critical fraction of APTMS (i.e., 25%). Remarkably, a tiny fraction (e.g., 1%) of APTMS was sufficient to produce stable nanoparticles with a hydrodynamic diameter of about 200 nm. Other factors that would also affect particle formation were determined. Moreover, an interesting temperature effect on particle formation was observed. The TEM micrographs show spherical nanospheres with mean sizes of 130-150 nm in diameter. The solid-state (29)Si NMR spectra demonstrate that the hybrid silica materials contain fully and partially condensed silicon structures. The bifunctionalized silica nanoparticles have positive zeta potentials whose magnitudes are positively correlated with the amount of APTMS. The total thiol content, however, is negatively correlated with the amount of APTMS. The cationic nanoparticles can bind an antisense oligonucleotide in a composition-dependent manner.

Modified nanoprecipitation method for polysulfone nanoparticles preparation

Towards developing a more universal and productive nanoprecipitation processes, we focus on the preparation of polysulfone (PSF) nanoparticles through instantaneous solvent displacement in a metal membrane contactor between dimethylformamide (DMF) and water. In the original nanoprecipitation process, cubic nuclei can form instantaneously, but slow growth and aggregation have intensive interactions. Moreover, the reservation of DMF may enhance the adhesive effect between polymeric particles, causing severe particle aggregation. To overcome this difficulty, a modified nanoprecipitation method appending a quenching step was proposed. The well-dispersed PSF nanoparticles are successfully obtained when ethyl acetate is introduced. In this way, DMF can be extracted from water solution, thus facilitating the precipitating of PSF. Furthermore, selecting water as the continuous fluid, the particle size can be adjusted simply by tuning the operating parameters, including the PSF concentration in the dispersed fluid and the ratio of two feeds. Compared with previous reports on the continuous nanoprecipitation process for polymeric nanoparticles preparation, this work shows advantages including expanding the adaptability to more functional polymers, providing better flexibility on process or product development independent of the use of surfactant, and presenting a high throughput and easy-to-scale-up equipment platform.