Green synthesis and reversible dispersion of a giant fluorescent cluster in solid and liquid phase

Highly fluorescent quinone-capped silver hydrosol for environmental remediation and sensing applications

A metal-enhanced fluorescence was achieved from in situ-generated Ag0 nanoparticles in the proximity of 2-hydroxy benzaldehyde (2HB). Such nanoparticles eliminated methyl blue (MB) dye from water exclusively in the presence of Zn2+ and were proven to be an efficient adsorbent for environmental remediation (maximum uptake capacity 1065 mg·g-1). Ag was zero valent in the absorbent, while Zn2+ was in Zn(OH)2 form. Fe3+ brought back MB in the aqueous medium due to the strong interaction of MB with Fe3+ and the regeneration of blue color helped to design a selective and sensitive Fe3+ sensing platform colorimetrically (linear detection range 10-4-10-6 M; linear detection limit 10-6 M). The silver nanoparticle-induced metal-enhanced fluorescence was quenched efficiently with MB. Pb2+ restored the quenched fluorescence by removing MB from the proximity of the metalized surface of silver, and Pb2+ sensing was performed fluorometrically (linear detection range; 10-5-5 × 10-8 M limit of detection 5 × 10-8 M). Iron and lead were also estimated in a variety of natural water sources, including rainfall, drinking water from taps, and water from the Ganga River via spiking method.

Electrochemical aspects of coinage metal nanoparticles for catalysis and spectroscopy

Down scaling bulk materials can cause colloidal systems to evolve into microscopically dispersed insoluble particles. Herein, we describe the interesting applications of coinage metal nanoparticles (MNPs) as colloid dispersions especially gold and silver. The rich plasmon bands of gold and silver in the visible range are elaborated using the plasmon resonance and redox potential values of grown metal microelectrode (GME). The gradation of their standard reduction potential values (E 0), as evaluated from the Gibbs free energy change for bulk metal, is ascribed to the variation in their size. Also, the effect of nucleophiles in the electrolytic cell with metal nanoparticles (MNPs) is described. The nucleophile-guided reduction potential value is considered, which is applicable even for bulk noble metals. Typically, a low value (as low as E 0 = +0.40 V) causes the oxidation of metals at the O2 (air)/H2O interface. Under this condition, the oxidation of noble metal particles and dissolution of the noble metal in water are demonstrated. Thus, metal dissolution as a function of the size of metal nanoparticles becomes eventful and demonstrable with the addition of a surfactant to the solution. Interestingly, the reversal of the nobility of gold (Au) and silver (Ag) microelectrodes at the water/electrode interface is confirmed from the evolution of normal and inverted 'core-shell' structures, exploiting visible spectrophotometry and surface-enhanced Raman scattering (SERS) analysis. Subsequently, the effect of the size, shape, and facet- and support-selective catalysis of gold nanoparticles (NPs) and the effect of incident photons on current conversion without an applied potential are briefly discussed. Finally, the synergistic effect of the emissive behaviour of gold and silver clusters is productively exploited.

Highly selective and sensitive tool for the detection of Hg(II) using 3-(Trimethoxysilyl) propyl methacrylate functionalized Ag-Ce nanocomposite from real water sample

Mercury and its derivates cause distinct toxicity and it is detrimental to the ecosystem where the excessive concentration contributes towards the environmental pollutants. The current study reported a colorimetric method for the detection of Hg(II) ion with high specificity and selectivity using Ag-Ce nanocomposite (NC) functionalized by 3-(Trimethoxysilyl) propyl methacrylate. The synthesized Ag-Ce NC was characterized by using double beam UV-visible spectrophotometer, zeta sizer, EDS, TEM, FT-IR, XRD and particle size analyzer. The synthesized particle possessed an average particle size of 27 ± 1 nm and zeta potential of -39.32 ± 3 mV. The brownish yellow colored Ag-Ce NC changed to colorless in presence of Hg(II) where the colorimetric detection was extremely specific and superior towards Hg(II) ion on comparing the tests with other metal ions. An excellent linear correlation was observed between absorbance (395 nm) and Hg(II) concentrations (1 nM-10 μM) (R² = 0.988) with LOD of 0.03 nM. A cotton swab based probe was prepared for selective, elegant and low cost colorimetric method to detect Hg(II). The parametric study was performed for optimizing the suitable condition. The colorimetric probe developed by this study for Hg(II) detection using Ag-Ce NC shows excellent practical applicability.

Novel Technology for the Removal of Brilliant Green from Water: Influence of Post-Oxidation, Environmental Conditions, and Capping

Chemical dyes are used in a wide range of anthropogenic activities and are generally not biodegradable. Hence, sustainable recycling processes are needed to avoid their accumulation in the environment. A one-step synthesis of Fe_core-maghemite_shell (Fe-MM) for facile, instantaneous, cost-effective, sustainable, and efficient removal of brilliant green (BG) dye from water has been reported here. The homogenous and monolayer type of adsorption is, to our knowledge, the most efficient, with a maximum uptake capacity of 1000 mg·g^-1, for BG on Fe-MM. This adsorbent was shown to be efficient in occurring in time-scales of seconds and to be readily recyclable (ca. 91%). As iron/iron oxide possesses magnetic behavior, a strong magnet could be used to separate Fe-MM coated with BG. Thus, the recycling process required a minimum amount of energy. Capping Fe-MM by hydrophilic clay minerals further enhanced the BG uptake capacity, by reducing unwanted aggregation. Interestingly, capping the adsorbent by hydrophobic plastic (low-density polyethylene) had a completely inverse effect on clay minerals. BG removal using this method is found to be quite selective among the five common industrial dyes tested in this study. To shed light on the life cycle analysis of the composite in the environment, the influence of selected physicochemical factors (T, pH, hν, O₃, and NO₂) was examined, along with four types of water samples (melted snow, rain, river, and tap water). To evaluate the potential limitations of this technique, because of likely competitive reactions with metal ion contaminants in aquatic systems, additional experiments with 13 metal ions were performed. To decipher the adsorption mechanism, we deployed four reducing agents (NaBH₄, hydrazine, LiAlH₄, and polyphenols in green tea) and NaBH₄, exclusively, favored the generation of an efficient adsorbent via aerial oxidation. The drift of electron density from electron-rich Fe_core to maghemite shells was attributed to be responsible for the electrostatic adsorption of N⁺ in BG toward Fe-MM. This technology is deemed to be environmentally sustainable in environmental remediation, namely, in waste management protocol.

Synergism of gold and silver invites enhanced fluorescence for practical applications

Synergism of gold and silver improves fluorescence behavior of gold–silver bimetallic clusters with practical applications.

Aggregation of nitroaniline in tetrahydrofuran through intriguing H-bond formation by sodium borohydride

The participation of sodium borohydride (NaBH4) in hydrogen bonding interactions and transient anion radical formation has been proved. Thus, the properties of NaBH4 are extended beyond the purview of its normal reducing capability and nucleophilic property. It is reported that ortho- and para-nitroanilines (NAs) form stable aggregates only in tetrahydrofuran (THF) in the presence of NaBH4 and unprecedented orange/red colorations are observed. The same recipe with nitrobenzene instead of nitroanilines (NAs) in the presence of NaBH4 evolves a transient rose red solution due to the formation of a highly fluorescent anion radical. Spectroscopic studies (UV-vis, fluorescence, RLS, Raman, NMR etc.) as well as theoretical calculations supplement the J-aggregate formation of NAs due to extensive hydrogen bonding. This is the first report where BH4(-) in THF has been shown to support such an aggregation process through H-bonding. It is further confirmed that stable intermolecular hydrogen bond-induced aggregation requires a geometrical match in both the nitro- and amino-functionalities attached to the phenyl ring with proper geometry. On the contrary, meta-nitroaniline remains as the odd man out and does not take part in such aggregation. Surprisingly, Au nanoparticles dismantle the J-aggregates of NA in THF. Explicit hydrogen bond formation in NA has been confirmed experimentally considering its promising applications in different fields including non-linear optics.

Imine (–CHN–) brings selectivity for silver enhanced fluorescence

Strong silver and gold stimulated fluorescence enhancement of alkaline salicylaldehyde solution have been observed. Ammonia or primary amine quantitatively eliminates gold enhanced fluorescence, keeping silver enhanced fluorescence unaffected.

Orange-red silver emitters for sensing application and bio-imaging

Strongly fluorescent HFL-containing Ag@Au particles are synthesized via a modified hydrothermal technique. This solution is used for sulfide sensing and cell imaging.

Selective dopamine chemosensing using silver-enhanced fluorescence

Condensation product of salicylaldehyde and 1,3 propylenediamine becomes a diiminic Schiff base, which is oxidized by AgNO3 in alkaline solution, and in turn, stable Ag(0) is produced at room temperature. Under this condition, the solution exhibits intense silver nanoparticle enhanced fluorescence (SEF) with the λ(em) at 412 nm. Dopamine is selectively detected down to the nanomolar level via exclusive fluorescence quenching of the SEF. Dopamine-infested solution regains the fluorescence [i.e., SEF in the presence of Hg(II) ions]. Thus dopamine and Hg(II) in succession demonstrate "turn off/on" fluorescence due to the change in the scattering cross section of Ag(0) and gives a quantitative measure of dopamine in real samples. The proposed method is free from interferences of common biocompetitors.

Photoluminescent AuCu bimetallic nanoclusters as pH sensors and catalysts

A facile and one-pot approach to the preparation of gold (Au) and copper (Cu) bimetallic nanoclusters (NCs) is unveiled. AuCu NCs reveal features of orange photoluminescence (PL), reversible pH-dependent PL properties, and efficient catalytic activity for degradation of methylene blue (MB).

Photoproduced fluorescent Au(I)@(Ag2/Ag3)-thiolate giant cluster: an intriguing sensing platform for DMSO and Pb(II)

Synergistic evolution of fluorescent Au(I)@(Ag2/Ag3)-thiolate core-shell particles has been made possible under the Sun in presence of the respective precursor coinage metal compounds and glutathione (GSH). The green chemically synthesized fluorescent clusters are giant (∼600 nm) in size and robust. Among all the common water miscible solvents, exclusively DMSO exhibits selective fluorescence quenching (Turn Off) because of the removal of GSH from the giant cluster. Again, only Pb(II) ion brings back the lost fluorescence (Turn On) leaving aside all other metal ions. This happens owing to the strong affinity of the sulfur donor of DMSO for Pb(II). Thus, employing the aqueous solution containing the giant cluster, we can detect DMSO contamination in water bodies at trace level. Besides, a selective sensing platform has emerged out for Pb(II) ion with a detection limit of 14 × 10(-8) M. Pb(II) induced fluorescence recovery is again vanished by I(-) implying a promising route to sense I(-) ion.