Diazonium cation-exchanged clay: an efficient, unfrequented route for making clay/polymer nanocomposites

Mechanical properties, corrosion and degradation behaviors, and in vitro cytocompatibility of a biodegradable Zn-5La alloy for bone-implant applications

Zinc (Zn) and its alloys are used in bone-fixation devices as biodegradable bone-implant materials due to their good biosafety, biological function, biodegradability, and formability. Unfortunately, the clinical application of pure Zn is hindered by its insufficient mechanical properties and slow degradation rate. In this study, a Zn-5 wt.% lanthanum (Zn-5La) alloy with enhanced mechanical properties, suitable degradation rate, and cytocompatibility was developed through La alloying and hot extrusion. The hot-extruded (HE) Zn-5La alloy showed ultimate tensile strength of 286.3 MPa, tensile yield strength of 139.7 MPa, elongation of 35.7%, compressive yield strength of 262.7 MPa, and microhardness of 109.7 HV. The corrosion resistance of the HE Zn-5La in Hanks' and Dulbecco's modified Eagle medium (DMEM) solutions gradually increased with prolonged immersion time. Further, the HE Zn-5La exhibited an electrochemical corrosion rate of 36.7 μm/y in Hanks' solution and 11.4 μm/y in DMEM solution, and a degradation rate of 49.5 μm/y in Hanks' solution and 30.3 μm/y in DMEM solution, after 30 d of immersion. The corrosion resistance of both HE Zn and Zn-5La in DMEM solution was higher than in Hanks' solution. The 25% concentration extract of the HE Zn-5La showed a cell viability of 106.5%, indicating no cytotoxicity toward MG-63 cells. We recommend the HE Zn-5La alloy as a promising candidate material for biodegradable bone-implant applications. STATEMENT OF SIGNIFICANCE: This work reports the mechanical properties, corrosion and degradation behaviors, in vitro cytocompatibility and antibacterial ability of biodegradable Zn-5La alloy for bone-implant applications. Our findings demonstrate that the hot-extruded (HE) Zn-5La alloy showed an ultimate tensile strength of 286.3 MPa, a yield strength of 139.7 MPa, an elongation of 35.7%, compressive yield strength of 262.7 MPa, and microhardness of 109.7 HV. HE Zn-5La exhibited appropriate degradation rates in Hanks' and DMEM solutions. Furthermore, the HE Zn-5La alloy showed good cytocompatibility toward MG-63 and MC3T3-E1 cells and greater antibacterial ability against S. aureus.

Silica-filled methacrylic composites with extremely high compressive strength

SYLOID® 244 has never been applied as a filler in composites with potential dental application. Therefore, the aim of research was to apply this silica in its unmodified and diazonium salt-modified forms in different mass ratios as fillers in light-cured methacrylic composites. The effectiveness of modification process was confirmed with the use of Raman spectroscopy. Methacrylic composites with the modified and unmodified SYLOID® 244, as well as unfilled resin as a control group were prepared. Their basic physicochemical properties, such as depth of cure, mass stability during incubation in saline, flexural and compressive strengths were examined. A positive effect of SYLOID® 244 modification on the properties of the examined composites was also demonstrated. The obtained results proved the high applicability of SYLOID® 244 as a filler in composites with potential dental applications.

High Performance Zinc Oxide Nanorod-Doped Ion Imprinted Polypyrrole for the Selective Electrosensing of Mercury II Ions

A biomimetic, ion-imprinted polymer (IIP) was prepared by electropolymerization of pyrrole at the surface of gold electrodes decorated with vertically grown ZnO nanorods. The vertical growth of the nanorods was achieved via an ultrathin aryl monolayer grafted by reduction of diazonium salt precursor. Pyrrole was polymerized in the presence of L-cysteine as chelating agent and Hg2+ (template). Hg2+-imprinted polypyrrole (PPy) was also prepared on a bare gold electrode in order to compare the two methods of sensor design (Au-ZnO-IIP vs. Au-IIP). Non-imprinted PPy was prepared in the same conditions but in the absence of any Hg2+ template. The strategy combining diazonium salt modification and ZnO nanorod decoration of gold electrodes permitted us to increase considerably the specific surface area and thus improve the sensor performance. The limit of detection (LOD) of the designed sensor was ~1 pM, the lowest value ever reported in the literature for gold electrode sensors. The dissociation constants between PPy and Hg2+ were estimated at [Kd1 = (7.89 ± 3.63) mM and Kd2 = (38.10 ± 9.22) pM]. The sensitivity of the designed sensor was found to be 0.692 ± 0.034 μA.pM-1. The Au-ZnO-IIP was found to be highly selective towards Hg2+ compared to cadmium, lead and copper ions. This sensor design strategy could open up new horizons in monitoring toxic heavy metal ions in water and therefore contribute to enhancing environmental quality.

Diazonium Modification of Inorganic and Organic Fillers for the Design of Robust Composites: A Review

This review focuses on fillers modified with diazonium salts and their use in composites. We reviewed scientific publications and presented information about such diazonium-modified fillers as boron nitride, carbon fillers, cellulose, clay, silica, titanium dioxide, and zeolite. The fillers were divided into two groups. The first group includes those that form covalent bonds with the polymer, while the second includes those that do not form them. This review indicates a tremendous impact of filler modification using diazonium salts on the properties of composites. The review presents examples of the impact of filler on such properties as thermal conductivity, thermal stability, and mechanical properties (e.g., interfacial shear strength, compressive strength, flexural strength). The presented review indicates the enormous potential of composites with diazonium-modified fillers in control drug release, antistatic coatings, electrode materials, photocatalysts, bone tissue engineering scaffolds, fuel cell applications, abrasive tools, and electromechanical strain sensor. We hope that this review will help both research groups and industry in choosing fillers for given types of polymers and obtaining composites with even better properties.

Highly Selective Copper Ion Imprinted Clay/Polymer Nanocomposites Prepared by Visible Light Initiated Radical Photopolymerization

There is an urgent demand worldwide for the development of highly selective adsorbents and sensors of heavy metal ions and other organic pollutants. Within these environmental and public health frameworks, we are combining the salient features of clays and chelatant polymers to design selective metal ion adsorbents. Towards this end, the ion imprinting approach has been used to develop a novel nanohybrid material for the selective separation of Cu2+ ions in an aqueous solution. The Cu2+-imprinted polymer/montmorillonite (IIP/Mt) and non-imprinted polymer/montmorillonite (NIP/Mt) nanocomposites were prepared by a radical photopolymerization process in visible light. The ion imprinting step was indeed important as the recognition of copper ions by IIP/Mt was significantly superior to that of NIP/Mt, i.e., the reference nanocomposite synthesized in the same way but in the absence of Cu2+ ions. The adsorption process as batch study was investigated under the experimental condition affecting same parameters such as contact time, concentration of metal ions, and pH. The adsorption capacity of Cu2+ ions is maximized at pH 5. Removal of Cu2+ ion achieved equilibrium within 15 min; the results obtained were found to be fitted by the pseudo-second-order kinetics model. The equilibrium process was well described by the Langmuir isothermal model and the maximum adsorption capacity was found to be 23.6 mg/g. This is the first report on the design of imprinted polymer nanocomposites using Type II radical initiators under visible light in the presence of clay intercalated with hydrogen donor diazonium. The method is original, simple and efficient; it opens up new horizons in the general domain of clay/polymer nanocomposites.

Structural, morphological and thermal properties of nanocomposites poly(GMA)/clay prepared by ultrasound and in-situ polymerization

This work focuses on the preparation and characterization of nanocomposites poly(glycidylmethacrylate)/organoclay. Effect of the organoclays nature and the preparation method were investigated in order to evaluate their structural, morphological and thermal properties. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nitrogen sorption at 77 K, scanning and transmission electronic microscopy (SEM, TEM) and thermogravimetric analysis (TGA) were employed to determine the features of the obtained materials. In the first step, the Algerian clay was modified by ultrasonic-assisted method using different concentrations of CTAB or TBAHS in which were used as green nano-filler. A series of nanocomposites were prepared by two different methods. The first deals the in-situ polymerization of GMA within the organoclay galleries and the second pathway involves the use of solution blending of poly(GMA) assisted by ultrasound. The obtained results confirm the intercalation of surfactants within the clay layers, while the nanocomposites obtained by the both methods showed different morphologies and structures in which the exfoliated and intercalated forms were obtained. Both nanocomposites displayed significant enhancement in the thermal stabilities compared to the unmodified poly(GMA). The best results in terms of reaction time, clay dispersion and nanocomposite yield were obtained by the ultrasound method.

A Review of the Synthesis and Applications of Polymer–Nanoclay Composites

Recent advancements in material technologies have promoted the development of various preparation strategies and applications of novel polymer–nanoclay composites. Innovative synthesis pathways have resulted in novel polymer–nanoclay composites with improved properties, which have been successfully incorporated in diverse fields such as aerospace, automobile, construction, petroleum, biomedical and wastewater treatment. These composites are recognized as promising advanced materials due to their superior properties, such as enhanced density, strength, relatively large surface areas, high elastic modulus, flame retardancy, and thermomechanical/optoelectronic/magnetic properties. The primary focus of this review is to deliver an up-to-date overview of polymer–nanoclay composites along with their synthesis routes and applications. The discussion highlights potential future directions for this emerging field of research.

Anti-corrosive and oil sensitive coatings based on epoxy/polyaniline/magnetite-clay composites through diazonium interfacial chemistry

Epoxy polymer nanocomposites filled with magnetite (Fe3O4) clay (B), named (B-DPA-PANI@Fe3O4) have been prepared at different filler loading (0.1, 0.5, 1, 3, 5 wt. %). The surface modification of clay by polyaniline (PANI) is achieved in the presence of 4-diphenylamine diazonium salt (DPA). The effects of the nanofiller loading on Tensile, mechanical and dielectric properties were systematically studied. Improved properties was highlighted for all reinforced samples. The addition of only 3 wt. % of the filler enhanced the tensile strength of the composites by 256%, and the glass transition temperature Tg by 37%. The dielectric spectra over a broad frequency showed a robust interface between the hybrid (B-DPA-PANI@Fe3O4) fillers and epoxy matrix. The results showed most significant improvement in corrosion inhibition using electrochemical impedance spectroscopy (EIS) in 3.5 wt % NaCl, as well as a significant response in oil sensing test. High charge transfer resistance of 110 × 106 Ω.cm2 using 3-wt % of filler was noted compared to 0.35 × 106 Ω.cm2 for the pure epoxy. The results obtained herein will open new routes for the preparation of efficient anticorrosion sensor coatings.

Advances on Aryldiazonium Salt Chemistry Based Interfacial Fabrication for Sensing Applications

Aryldiazonium salts as coupling agents for surface chemistry have evidenced their wide applications for the development of sensors. Combined with advances in nanomaterials, current trends in sensor science and a variety of particular advantages of aryldiazonium salt chemistry in sensing have driven the aryldiazonium salt-based sensing strategies to grow at an astonishing pace. This review focuses on the advances in the use of aryldiazonium salts for modifying interfaces in sensors and biosensors during the past decade. It will first summarize the current methods for modification of interfaces with aryldiazonium salts, and then discuss the sensing applications of aryldiazonium salts modified on different transducers (bulky solid electrodes, nanomaterials modified bulky solid electrodes, and nanoparticles). Finally, the challenges and perspectives that aryldiazonium salt chemistry is facing in sensing applications are critically discussed.

Diazonium salt-based photoiniferter as a new efficient pathway to clay–polymer nanocomposites

Diazonium salts were used to prepare clay–polymer nanocomposites by living free radical photopolymerization of glycidyl methacrylate. The resulting intercalated nanocomposites have an organic mass loading of ∼41 wt% and a polymer-rich surface.

Functionalization of nanomaterials with aryldiazonium salts

This paper reviews the surface modification strategies of a wide range of nanomaterials using aryldiazonium salts. After a brief history of diazonium salts since their discovery by Peter Griess in 1858, we will tackle the surface chemistry using these compounds since the first trials in the 1950s. We will then focus on the modern surface chemistry of aryldiazonium salts for the modification of materials, particularly metallic, semiconductors, metal oxide nanoparticles, carbon-based nanostructures, diamond and clays. The successful modification of sp(2) carbon materials and metals by aryldiazonium salts paved the way to innovative strategies for the attachment of aryl layers to metal oxide nanoparticles and nanodiamonds, and intercalation of clays. Interestingly, diazotized surfaces can easily trap nanoparticles and nanotubes while diazotized nanoparticles can be (electro)chemically reduced on electrode/materials surfaces as molecular compounds. Both strategies provided organized 2D surface assembled nanoparticles. In this review, aryldiazonium salts are highlighted as efficient coupling agents for many types of molecular, macromolecular and nanoparticulate species, therefore ensuring stability to colloids on the one hand, and the construction of composite materials and hybrid systems with robust and durable interfaces/interphases, on the other hand. The last section is dedicated to a selection of patents and industrial products based on aryldiazonium-modified nanomaterials. After nearly 160 years of organic chemistry, diazonium salts have entered a new, long and thriving era for the benefit of materials, colloids, and surface scientists. This tempts us to introduce the terminology of "diazonics" we define as the science and technology of aryldiazonium salt-derived materials.

In situ diazonium-modified flexible ITO-coated PEN substrates for the deposition of adherent silver-polypyrrole nanocomposite films

In this paper, we report a simple and versatile process of electrografting the aryl multilayers onto indium tin oxide (ITO)-coated flexible poly(ethylene naphthalate) (PEN) substrates using a diazonium salt (4-pyrrolylphenyldiazonium) solution, which was generated in situ from a reaction between the 4-(1H-pyrrol-1-yl)aniline precursor and sodium nitrite in an acidic medium. The first aryl layer bonds with the ITO surface through In-O-C and Sn-O-C bonds which facilitate the formation of a uniform aryl multilayer that is ∼8 nm thick. The presence of the aryl multilayer has been confirmed by impedance spectroscopy as well as by electron-transfer blocking measurements. These in situ diazonium-modified ITO-coated PEN substrates may find applications in flexible organic electronics and sensor industries. Here we demonstrate the application of diazonium-modified flexible substrates for the growth of adherent silver/polpyrrole nanocomposite films using surface-confined UV photopolymerization. These nanocomposite films have platelet morphology owing to the template effect of the pyrrole-terminated aryl multilayers. In addition, the films are highly doped (32%). This work opens new areas in the design of flexible ITO-conductive polymer hybrids.

Exfoliated clay/polyaniline nanocomposites through tandem diazonium cation exchange reactions and in situ oxidative polymerization of aniline

Exfoliated, conductive clay/polyaniline nanocomposites were prepared by polymerization of aniline in the presence of diazonium cation exchanged bentonite.