Photoinduced demulsification of emulsions using a photoresponsive gemini surfactant

Charge Regulation at the Nanoscale as Evidenced from Light-Responsive Nanoemulsions

Emulsions are indispensable in everyday life, and the demand for emulsions' diversity and control of properties is therefore substantial. As emulsions possess a high internal surface area, an understanding of the oil/water (o/w) interfaces at the molecular level is fundamental but often impaired by experimental limitations to probe emulsion interfaces in situ. Here, we have used light-responsive surfactants (butyl-AAP) that can photoisomerize between E and Z isomers by visible and UV light irradiation to tune the emulsion interfaces. This causes massive changes in the interface tension at the extended o/w interfaces in macroemulsions and a drastic shift in the surfactants' critical micelle concentration, which we show can be used to control both the stability and phase separation. Strikingly different from macroemulsions are nanoemulsions (RH ∼90 nm) as these are not susceptible to E/Z photoisomerization of the surfactants in terms of changes in their droplet size or ζ-potential. However, in situ second-harmonic scattering and pulsed-field gradient nuclear magnetic resonance (NMR) experiments show dramatic and reversible changes in the surface excess of surfactants at the nanoscopic interfaces. The apparent differences in ζ-potentials and surface excess provide evidence for a fixed charge to particle size ratio and the need for counterion condensation to renormalize the particle charge to a critical charge, which is markedly different compared to the behavior of very large particles in macroemulsions. Thus, our findings may have broader implications as the electrostatic stabilization of nanoparticles requires much lower surfactant concentrations, allowing for a more sustainable use of surfactants.

Innovative Real-Time Flow Sensor Using Detergent-Free Complex Emulsions with Dual-Emissive Semi-Perfluoroalkyl Substituted Α-Cyanostilbene

In this study, the potential of complex emulsions is investigated as transducers in sensing applications. Complex emulsions are stabilized without external detergents by developing a novel α-cyanostilbene substituted with PEG and semi-perfluoroalkyl chain (CNFCPEG). CNFCPEG exhibits unique variable emission properties depending on its aggregation state, allowing dual blue and green emissions in complex emulsions with hydrocarbon-in-fluorocarbon-in-water (H/F/W) morphology. The green excimer emissions result from the self-assembly of CNFCPEG at the fluorocarbon/water interface, while the blue emission observed is due to aggregation in the organic phase. A novel flow-injection method is developed by incorporating complex emulsions with CNFCPEG into multiple-well flow chips (MWFC). Iodine is successfully detected in a mobile aqueous solution by monitoring morphology changes. The findings demonstrate that self-stabilized complex emulsions with MWFC hold great promise for real-time sensing without costly instruments.

Synthesis and Surface Properties of Photoresponsive Gemini Surfactants: Implication for Remediating PAHs-Contaminated Groundwater

The efficient utility of surfactants remains a daunting task for groundwater remediation. In this study, we have synthesized a conventional photoresponsive surfactant 4-[4-[(4-butylphenyl)azo]phenoxy]butyldimethylethylammonium bromide (AzoPB) and a gemini photoresponsive surfactant N¹,N²-bis[4-[4-[(4-butylphenyl)azo]phenoxy]butyl]-N¹,N²-tetramethylethane-1,2-diammonium bromide (AzoPBT) for solubilizing PAHs in groundwater. The two surfactants' photosensitivity, surface properties, and solubilization/release ability for phenanthrene (Phe) and acenaphthylene (Ace) were studied in detail. Under UV-light irradiation for 15-20 s, the two surfactants can be converted from trans to cis, while cis-to-trans isomerization can be achieved under visible-light irradiation for 1 min. Compared to AzoPB, AzoPBT exhibited strong surface properties such as lower critical micelle concentration (0.52 mM), surface tension (γ, 28.94 mN·m^-1), minimum area (A_min, 1.72 × 10^-8 nm²), and higher maximum adsorption (Γ_max, 96.55 mol·m^-2). The solubility of Phe and Ace in the AzoPBT aqueous solution (12.84 and 14.27 mg/L) was much higher than that in the AzoPB aqueous solution (7.51 and 8.77 mg/L) and gradually increased as the surfactant concentration increased in both aqueous solutions. Compared to AzoPB, gemini surfactant AzoPBT exhibited stronger solubilization ability. After four cycles of cis-trans isomerization conversion, AzoPBT could still reduce the hydrophobicity of Phe in natural groundwater, although the solubility of Phe decreased slightly. Additionally, the release capacity of AzoPBT was significantly higher than that of AzoPB during the cyclic solubilization-release process. The results indicated that gemini photoresponsive surfactants should be preferable to conventional photoresponsive surfactants for groundwater remediation due to their higher solubilization and release efficiency for Phe in the cyclic solubilization and release process, which can improve repair efficiency, minimize secondary pollution, and reduce remediation costs.

Recent Progress toward Physical Stimuli-Responsive Emulsions

Emulsion as a fine dispersion of immiscible liquids has involved widespread applications in industry, pharmaceuticals, agriculture and personal care. Stimuli-responsive emulsions capable of on-demand demulsification or changing their properties are required in many cases such as controllable release cargo, oil recovery, emulsifiers recycle and product separation, great progress has been achieved in these areas. Among these various triggers, much effort has been made to develop physical stimuli, due to the noninvasive and environmentally friendly characteristics. Physical stimuli-responsive emulsions provide a plenty of valuable practical applications in the fields of sustainable industry, biomedical reaction, drug delivery. Here, we summarize the recent development in the field of emulsions in response to physical stimuli consisting of temperature, light, magnetic field, electrical field, etc. The preparation methods and mechanisms of physical stimuli-responsive emulsions and their applications of catalysis reaction, drug delivery, and oil recovery are highlighted in this review. The future directions and outstanding problems of the physical stimuli-responsive emulsions are also discussed. This article is protected by copyright. All rights reserved.

A pH-sensitive W/O emulsion for the preparation and rapid dissolution of polyacrylamide-based friction reducer

The pH-sensitive modified-polyacrylamide emulsion shows a fast dissolution rate with a dissolution time of about 1 min and long storage stability.

Self-Organized Liquid Crystal Droplets as Phototunable Softmasks

A single-step self-organized pathway is harnessed to generate large-area and high-density liquid-crystal (LC) microdroplets via rapid spreading of an LC-laden volatile liquid film on an aqueous surfactant bath. The surfactant loading on the water bath and LC loading in the solvent fluid help in tuning the size, periodicity, and ordering of LC microdroplets. Remarkably, the experiments reveal a transition from a spinodal to heterogeneous nucleation pathway of dewetting when the surfactant loading is modulated from below to beyond the critical micellar concentration in the aqueous phase. In the process, a host of unprecedented drop formation modes, such as dewetting and contact-line instability, random ejection, and "fire cracker" toroid splitting, have been uncovered. Subsequently, the LC microdroplets on the air-water interface are employed as photomasks suitable for soft-photolithography applications. Such masks help in the decoration of a host of mesoscale three-dimensional features on the films of photoresists when photons are guided through the LC droplets. In such a scenario, phase transition of LC droplets under solvent vapor annealing is employed to control the movement of photons through drops and subsequently modulate the light exposure on the photoresist surface. Such a simple soft-photolithography setup leads to an array of flattened droplets on a positive resist, while donut features are observed on the negative tone. Remarkably, the orientation of nematogens within 4-cyano-4'-pentylbiphenyl droplets and at the three-phase contact-line provides additional handles in controlling the transmission of photons, which facilitates such a unique pattern formation. A number of low-cost and simple strategies are also discussed to order such soft-photolithography patterns. Importantly, with a minor modification to the same experimental setup, we could also measure the variation in the order parameter of the LC droplet during its phase transitions from the nematic to isotropic state.

Influence of Polarity Change and Photophysical Effects on Photosurfactant-Driven Wetting

Photosurfactants have shown considerable promise for enabling stimuli-responsive control of the properties and motion of fluid interfaces. Recently, a number of photoswitch chemistries have emerged to tailor the photoresponsive properties of photosurfactants. However, systematic studies investigating how photoresponsive surfactant behavior depends on the photochemical and photophysical properties of the switch remain scarce. In this work, we develop synthetic schemes and surfactant designs to produce a well-controlled library of photosurfactants to comparatively assess the behavior of photoswitch chemistry on interfacial behavior. We employ photoinduced spreading of droplets at fluid interfaces as a model for such studies. We show that although photosurfactant response is largely guided by expected trends with changes in polarity of the photoswitch, interfacial behavior also depends nontrivially and sometimes counter-intuitively on the kinetics and mechanisms of photoswitching, particularly at the interface of two solvents, as well as on complex interactions with other surfactants. Understanding these complexities enables the design of new photosurfactant systems and their optimization toward responsive functions including triggered spreading, dewetting, and destabilization of droplets on solid and fluid surfaces.

Dynamic Interfacial Regulation by Photodeformable Azobenzene-Containing Liquid Crystal Polymer Micro/Nanostructures

Photoresponsive materials offer local, temporal, and remote control over their chemical or physical properties under external stimuli, giving new tools for interfacial regulation. Among all, photodeformable azobenzene-containing liquid crystal polymers (azo-LCPs) have received increasing attention because they can be processed into various micro/nanostructures and have the potential to reversibly tune the interfacial properties through chemical and/or morphological variation by light, providing effective dynamic interface regulation. In this feature article, we highlight the milestones in the dynamic regulation of different interfacial properties through micro/nanostructures made of photodeformable azobenzene-containing liquid crystal polymers (azo-LCPs). We describe the preparation of different azo-LCP micro/nanostructures from the aspects of materials and processing techniques and reveal the importance of mesogen orientation toward dynamic interfacial regulation. By introducing our recently developed linear azo-LCP (azo-LLCP) with good mechanical and photoresponsive performances, we discuss the challenge and opportunity with respect to the dynamic light regulation of two- and three-dimensional (2D/3D) micro/nanostructures to tune their related interfacial properties. We have also given our expectation toward exploring photodeformable micro/nanostructures for advanced applications such as in microfluidics, biosensors, and nanotherapeutics.

Interactions between CO2-Responsive Switchable Emulsion Droplets Determined by Using Optical Tweezers

CO₂-responsive switchable emulsions have been of great interest in some industrial processes where the stability of the emulsion is only required temporarily, such as oil transport, drug delivery, and fossil fuel production. The good understanding of the stability and instability mechanism is vital to the switchable behavior between emulsification and demulsification. Herein, a novel approach was developed to determine the interactions between two switchable emulsion droplets directly by a dual-laser optical tweezers instrument. The repulsive force between a couple of tetradecane droplets occurs to increase progressively with the increasing concentration of switchable surfactant in solutions. However, the repulsive force appears to decrease progressively in turn when the switchable surfactant concentration is far higher than the critical micelle concentration (CMC). Moreover, the depletion effect starts to emerge in the higher surfactant concentration which is attributed to the switchable surfactant micelles generated in solutions. In addition, according to the measurements of interaction forces, a mechanism of the switchable behavior is well proposed, which is established by the principle of self-assembly/detachment of the switchable surfactant, resulting in the weakening and re-enhancing of the electrostatic double-layer (EDL) repulsive forces between tetradecane droplets, upon selective introduction and removal of CO₂. Based on this work, a novel perspective was provided to study the switchable emulsion, which can contribute instructive messages for the understanding of stability and instability mechanisms of switchable emulsions.

Reversible-Tuning Krafft Temperature of Selenium-Containing Ionic Surfactants by Redox Chemistry

An easy, effective, and reversible strategy for tuning the Krafft temperature (K_T) of selenium-containing ionic surfactants, with head groups ranging in nature from anionic to amphoteric, has been achieved for the first time via the redox chemistry of selenium. After oxidation with H₂O₂, the selenide group was converted to a more hydrophilic selenoxide group. This made the oxidized forms of the surfactants more water-soluble, which results in a marked reduction in the K_T. In contrast, the hydrophilic selenoxide was restored to its reduced form of selenide via reduction reaction, which allowed the K_T value to return to its initial value. By alternating the oxidization and reduction treatments, the K_T of the selenium-containing surfactants in this work could be reversibly switched over 5-10 cycles without causing obvious adverse distortions.

CO2/N2-responsive oil-in-water emulsions using a novel switchable surfactant

HYPOTHESIS

Recently, switchable or stimuli-responsive emulsions have attracted much research interest in many industrial fields. In this work, a novel CO₂/N₂-responsive surfactant was designed and developed to facilitate the formation of switchable oil-in-water (O/W) emulsions with fast switching characteristics between a stable emulsion and separate phases upon alternatively bubbling CO₂ and N₂.

EXPERIMENTS

The novel CO₂/N₂-responsive surfactant was facilely prepared by mixing an anionic fatty acid (oleic acid) and a cationic amine (1,3-Bis (aminopropyl) tetramethyldisiloxane) at a 1:1 molecular ratio, which was assembled based on electrostatic interactions. The structure and properties of the novel CO₂/N₂-responsive switchable surfactant were investigated by Fourier-transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR) spectroscopy, and interfacial tensions.

FINDINGS

The developed surfactant shows an excellent interfacial activity at the oil/water interface, which can significantly reduce the dosage of the switchable surfactant compared with previous CO₂/N₂-responsive surfactants. The dynamic interfacial tension of n-decane and aqueous phase decreased from 45 mN m^-1 to 5 mN m^-1 within 100 s with the addition of 0.2 mM surfactant. In this work, a low concentration of the novel switchable surfactant (e.g., 20.0 mM) can realize reversible emulsification and demulsification in an emulsion system as compared with the high dosage (e.g., ~150 mM) in previous reports, which will bring huge economic benefits in industrial applications in the future. Moreover, this work expands the family of ion-pair surfactants to small amino-functionalized molecules beyond Jeffamine D-230, which promotes the development of simple and switchable ion-pair surfactant. It is found that the O/W emulsions stabilized by the switchable surfactant show excellent stability, which can be stored for over 60 days at room temperature without any obvious change. Interestingly, the stable O/W emulsion is completely demulsified upon bubbling CO₂ for 30 s and can be easily re-emulsified to the initial state after purging N₂ at 60 °C within 10 min, which demonstrates a rapid and highly efficient switching behavior. The reversible emulsification and demulsification process is ascribed to the reversible assembly and disassembly of the switchable surfactant, which is induced by the removal and purge of CO₂.

Redox and pH Dual-Responsive Emulsion Using Ferrocenecarboxylic Acid and N,N-Dimethyldodecylamine

The derivatives of ferrocene with redox properties are widely used. Some studies have used complex synthesis processes to obtain surfactants with redox properties. In order to simplify the synthesis process, FA-DMDA-Ox, a surfactant with redox and pH dual responses, was prepared by simple electrostatic interaction between ferrocenecarboxylic acid (FA) and N,N-dimethyldodecylamine (DMDA). A stable oil-in-water emulsion was prepared by using FA-DMDA-Ox at 25 °C. When sodium sulfite was added to the emulsion, the emulsion was demulsified. This was due to the oxidized ferrocene group that was reduced from the charged hydrophilic state to the uncharged hydrophobic state, which destroyed the original surface activity. In addition, when added HCl or NaOH to the emulsion changed pH, demulsification was caused by the dissociation of FA-DMDA-Ox.

Light and latex: advances in the photochemistry of polymer colloids

Unparalleled temporal and spatial control of colloidal chemical processes introduces immense potential for the manufacturing, modification, and manipulation of latex particles.

Fast Active Merging of Microdroplets in Microfluidic Chambers Driven by Photo-Isomerisation of Azobenzene Based Surfactants

In this work, we report on the development of a newly synthesized photoactive reversible azobenzene derived surfactant polymer, which enables active and fast control of the merging of microdroplets in microfluidic chambers, driven by a pulsed UV laser optical stimulus and the well known cis-trans photo-isomerisation of azobenzene groups. We show for the first time that merging of microdroplets can be achieved optically based on a photo-isomerization process with a high spatio-temporal resolution. Our results show that the physical process lying behind the merging of microdroplets is not driven by a change in surface activity of the droplet stabilizing surfactant under UV illumination (as originally expected), and they suggest an original mechanism for the merging of droplets based on the well-known opto-mechanical motion of azobenzene molecules triggered by light irradiation.

Photoinduced Reconfiguration of Complex Emulsions Using a Photoresponsive Surfactant

Photoresponsive complex emulsions are prepared in a three-phase system consisting of two oils: hexane (H) and perfluorooctane (F). An aqueous solution of a mixed surfactant of fluorosurfactant, F(CF₂) _x(CH₂CH₂O) _yH (Zonyl FS-300), and a synthesized light-responsive surfactant, 2-(4-(4-butylphenyl)diazenylphenoxy)ethyltrimethylammonium bromide (C₄AZOC₂TAB) was employed as the continuous phase. Complex emulsions with various geometries were prepared by one-step vortex mixing and a temperature-induced phase-separation method. It was noticed that the topology of the complex emulsion was highly dependent on the mass ratio of Zonyl FS-300/C₄AZOC₂TAB. Light microscopy images showed that phase inversion from an H/F/W- to an F/H/W-type double emulsion via a Janus emulsion was achieved by gradually increasing the mass ratio of C₄AZOC₂TAB/Zonyl FS-300. Upon UV/blue light irradiation, the topology of complex emulsions was turned to switch from an F/H/W double emulsion to a Janus emulsion to an entirely inverted H/F/W double emulsion. Dynamic interfacial tension measurements showed that UV irradiation of the interface between an aqueous trans-C₄AZOC₂TAB solution and hexane brings about an increase in the interfacial tension, suggesting the nature of photoinduced morphological changes in complex emulsions. The reconfiguration process of complex emulsions was illustrated by the Marangoni effect based on heterogeneity in the interfacial tension at the complex emulsion surface induced by controlling the molecular conversion of C₄AZOC₂TAB using light irradiation. Finally, we used the complex emulsions structure to form an on-off switch to start and shut off the evaporation of one volatile phase to achieve process monitoring. This could be used to initiate and quench a reaction, which offers a novel idea for achieving switchable and reversible reaction control in multiple-phase reactions.

Development of Highly Efficient Oil-Water Separation Carbon Nanotube Membranes with Stimuli-Switchable Fluxes

In this work, a carbon nanotube (CNT)-based membrane [(4-((4-((11-ferroceneundecyl)oxy)phenyl)diazenyl)phenoxy)-diethylene triamine (FADETA)/polyethyleneimine (PEI)-decorated CNT membrane] with stimuli-switchable separation fluxes was developed. The multiwalled CNTs were modified by a pH-, light-, and redox stimuli-responsive surfactant FADETA initially, and then the FADETA-decorated CNTs were further cross-linked by PEI and finally coated on the polypropylene membrane. Interestingly, the particular membrane was successfully applied in emulsion systems to separate oil and water with high efficiency. First, the FADETA-/PEI-decorated CNT membrane showed highly porous microstructural characteristics owing to the overlapped and cross-linked CNTs as confirmed by the scanning electron microscopy observation. Then, it showed strong hydrophilicity to water in the air and high oleophobicity to oil underwater, thereby endowing the membrane with the potential to separate oil and water. Owing to the modified multiple stimuli-responsive FADETA on CNTs, the separation fluxes were stimuli-switchable, which could be adjusted reversibly by environmental factors including pH, light, and redox.

Smart Air-Water Interfaces with Arylazopyrazole Surfactants and Their Role in Photoresponsive Aqueous Foam

A new light-switchable azo-surfactant arylazopyrazole tetraethylene glycol carboxylic acid (AAP-E₄) was used as a molecular building block to functionalize macroscopic foams. AAP-E₄ was studied in the bulk solution with UV/vis spectroscopy and at the interface with sum-frequency generation (SFG) as well as tensiometry. Additional foaming experiments were performed with a dynamic foam analyzer to study the role of AAP-E₄ surfactants at the ubiquitous air-water interface as well as within macroscopic foam. In the bulk, it is possible to switch the AAP-E₄ surfactant reversibly from trans to cis configurations and vice versa using 380 nm UV and 520 nm green light, respectively. At the interface, we demonstrate the excellent switching ability of AAP-E₄ surfactants and a substantial modification of the surface tension. In addition, we show that the response of the interface is strongly influenced by lateral electrostatic interactions, which can be tuned by the charging state of AAP-E₄. Consequently, the electrostatic disjoining pressure and thus the foam stability are highly dependent on the bulk pH and the charging state of the interface. For that reason, we have studied both the surface net charge (SFG) and the surface excess (tensiometry) as important parameters that determine foam stability in this system and show that neutral pH conditions lead to the optimal compromise between switching ability, surface excess, and surface charging. Measurements on the foam stability demonstrated that foams under irradiation with green light are more stable than foams irradiated with UV light.

Responsive Emulsions Stabilized by Amphiphilic Supramolecular Graft Copolymers Formed in Situ at the Oil-Water Interface

Amphiphilic supramolecular graft copolymers which can stabilize oil-in-water (o/w) emulsions and enable responsive demulsification were demonstrated in this study. Linear poly[( N, N-dimethylacrylmide)- stat-(3-acrylamidophenylboronic acid)] (PDMA- stat-PAPBA) copolymers with phenylboronic acid (PBA) groups and linear polystyrene homopolymers with cis-diol terminals (PS(OH)₂) were synthesized by reversible addition-fragmentation chain transfer polymerization. By the homogenization of the biphasic mixtures of an alkaline water solution of PDMA- stat-PAPBA copolymer and a toluene solution of PS(OH)₂ homopolymer, stable o/w emulsions could be generated, although neither PDMA- stat-PAPBA nor PS(OH)₂ alone was able to stabilize the emulsion. It was verified that the dispersed oil droplets in the emulsions were stabilized by the amphiphilic PDMA- stat-PAPBA- g-PS supramolecular graft copolymers, which were formed in situ at the oil-water interface by the complexation between the lateral PBA groups of PDMA- stat-PAPBA and the diol terminals of PS(OH)₂ during homogenization. These emulsions showed pH- and glucose-responsive demulsification because of the reversible B-O bonds between the PDMA- stat-PAPBA backbones and the PS side chains. The effects of polymer concentrations on emulsion formation were also investigated. The current study provides an alternative method for the facile preparation of responsive polymeric emulsifiers, which potentially may be extended to other polymer pairs containing PBA and cis-diol groups.

A pH and salt dually responsive emulsion in the presence of amphiphilic macromolecules

A pH and salt dually responsive emulsion has been designed on the basis of a novel amphiphilic macromolecule. It was found that the water separation of an oil-in-water emulsion reached up to ∼60% after standing for 10 min at low pH. 2-(Diethylamino)ethyl methacrylate (DEA) residues were found to induce the macromolecules to protonate and to be hydrophilic at pH values between 2 and 6, resulting in dewetting from oil droplet surfaces in water. Besides, the macromolecules form aggregates with different structures at the water/oil interface, depending on the pH value or salt concentration of the emulsion system, enabling the system to be demulsified in response to the pH or salt stimulus. The experimental results also showed that with the addition of aluminium chloride at 100 mg L^-1, the water separation was about 70% after 20 min. A possible mechanism with respect to demulsifying was proposed on the basis of an "ion bridge" among sodium acrylate (SA) residues, inducing the macromolecules to "cross-link" and become insoluble, and leading to oil/water separation. Furthermore, at a fixed pH of 5, addition of salt to the aqueous dispersion increased the degree of oil-water interfacial activity and batch emulsions were significantly unstable to coalesce at a low salinity of 25-50 mg L^-1. This finding presents a new manipulation on emulsion stability and potential applications in the fields of oil recovery, wastewater treatment, sludge removal, and so on.

Photoresponsive Foams Generated by a Rigid Surfactant Derived from Dehydroabietic Acid

Innovation in the structure of surfactants is crucial to the construction of a surfactant-based system with intriguing properties. With dehydroabietic acid as a starting material, a nearly totally rigid azobenzene surfactant (R-azo-Na) was synthesized. The trans-R-azo-Na formed stable foams with half-lives of 636, 656, 976, and 872 min for 0.3, 1, 2, and 4 mmol·L^-1 aqueous solutions, respectively. Under UV light irradiation, a fast collapse of the foams was observed, showing an in situ response. The excellent foam stability of trans-R-azo-Na leads to the extremely high photoresponsive efficiency. As revealed by dynamic surface tension and pulsed-field gradient NMR methods, an obvious energy barrier existed in the adsorption/desorption process of trans-R-azo-Na on the air/water interface. The foams formed by trans-R-azo-Na are thus stable against coarsening processes. The results reveal the unique photoresponsive behavior of a surfactant with a rigid hydrophobic skeleton and provide new insights into the structure causing aggregation of surfactants.

CO2-Switchable microemulsion based on a pseudogemini surfactant

At present, more and more researchers around the world are paying attention to stimuli-responsive surfactants. In this paper, we have reported a microemulsion prepared from the tertiary amine TMPDA (N,N,N',N'-tetramethyl-1,3-propanediamine) and the anionic surfactant SDS (sodium dodecyl sulphate), which has good carbon dioxide response characteristics. The molar ratio of TMPDA to SDS is 1 : 2. By introducing CO₂ into the microemulsion that consists of SDS, TMPDA, n-hexane, n-butanol and water, the tertiary amine TMPDA molecules can be protonated to form quaternary ammonium species. The protonated tertiary amine TMPDA can be assembled with SDS by electrostatic interactions to form a pseudogemini surfactant (SDS-TMPDA-SDS). The pseudogemini surfactant can dissolve in the aqueous phase which makes the microemulsion break down eventually. By bubbling N₂ after CO₂ into the same system at 50 °C for 3 hours, the pseudogemini surfactant SDS-TMPDA-SDS disintegrates into SDS and TMPDA, respectively. At the same time, the microemulsion also recovers its initial state. Such a reversible transition could be repeated for several cycles from monophase to complete phase separation.

pH Switchable Emulsions Based on Dynamic Covalent Surfactants

Dynamic covalent surfactants were designed to prepare pH switchable emulsions. A dynamic covalent bond between nonamphiphilic building blocks (polyethylenimine (PEI) and benzaldehyde (B)) was introduced to form the dynamic covalent surfactant PEI-B. The dynamic nature of covalent bond in PEI-B was confirmed by ¹H NMR and fluorescence probe analysis. Stable emulsions were successfully prepared with interfacial active PEI-B at pH 7.8 with various water/paraffin oil ratios under sonication. When lowering the pH to 3.5, a complete phase separation was observed as a result of breaking dynamic covalent bond in the interfacial active PEI-B. After tuning the pH back to 7.8, stable emulsion was obtained again due to the reformation of the dynamic covalent bond and hence interfacial active PEI-B. The emulsification and demulsification were dependent on the formation and breaking of dynamic covalent bond in PEI-B. Such pH-triggered emulsification and demulsification can be switched at least three times. Application of dynamic covalent surfactants will open up a novel route for preparing responsive emulsions.

Phototactic behavior of self-propelled micrometer-sized oil droplets in a surfactant solution

We demonstrate the phototactic behavior of self-propelled micrometer-sized oil droplets in a far-from-equilibrium state.

Coarse-grained molecular dynamics study on the self-assembly of Gemini surfactants: the effect of spacer length

This work provides a molecular-level understanding of the underlying mechanism of the self-assembly of Gemini surfactants.

Effective and Reversible Switching of Emulsions by an Acid/Base-Mediated Redox Reaction

To develop a fast, effective, and reversible strategy for phase separation and re-emulsification of the surfactant-based emulsions, a strategy for using acid/base-mediated redox reactions was established to switch the emulsions formed from a redox-responsive anionic surfactant of potassium dodecyl seleninate (C₁₂SeO₂K). Upon acidification, C₁₂SeO₂K was reduced by KI to give didodecyl diselenide (C₁₂Se)₂, a state of almost no surface or interfacial activity; upon basification, (C₁₂Se)₂ was oxidized by I₂ to give C₁₂SeO₂K again. The fractional conversion of C₁₂SeO₂K in the reversible switching processes was close to 100%. Consequently, an unusually large change in interfacial tension (ΔIFT) as high as ∼27.1 mN m^-1 was obtained at a wider concentration range starting from the critical micelle concentration of C₁₂SeO₂K; the highest IFT at the oil-water interface was obtained after an almost complete switch-off, giving an oil-aqueous solution interface very similar to that without any emulsifiers, which leads to the effective and fast phase separation of the C₁₂SeO₂K-based switchable emulsions.

Demulsification of Redox-Active Emulsions by Chemical Oxidation

This article reports the influence of redox reactions on emulsions of n-octane and an aqueous solution of a ferrocene-containing surfactant (FTMA; (11-ferrocenylundecyl)trimethylammonium bromide). Above a certain surfactant concentration, stable O/W emulsions were formed from an aqueous solution of reduced FTMA; in contrast, mixtures of n-octane and an aqueous solution of oxidized FTMA did not form emulsions at any surfactant concentration. Furthermore, adding an oxidant to the stable O/W emulsions of reduced FTMA led to coalescence of the oil (octane) droplets in the emulsions, and subsequently, the oil and water (aqueous FTMA solution) phases fully separated from the emulsions, i.e., demulsification occurred. Equilibrated interfacial tension measurements indicate that oxidation of the ferrocenyl group in FTMA brings about an increase in the interfacial tension between the octane and aqueous surfactant solution phases. From these results, we concluded that the oxidation of reduced FTMA to oxidized FTMA led to the desorption of surfactant molecules adsorbed at the interface of the octane/aqueous surfactant solution, leading to demulsification.