Color- and morphology-controlled self-assembly of new electron-donor-substituted aggregation-induced emission compounds

Comprehensive Empirical Model of Substitution—Influence on Hydrogen Bonding in Aromatic Schiff Bases

In this work, over 500 structures of tri-ring aromatic Schiff bases with different substitution patterns were investigated to develop a unified description of the substituent effect on the intramolecular hydrogen bridge. Both proximal and distal effects were examined using Density Functional Theory (DFT) in the gas phase and with solvent reaction field (Polarizable Continuum Model (PCM) and water as the solvent). In order to investigate and characterize the non-covalent interactions, a topological analysis was performed using the Quantum Theory of Atoms In Molecules (QTAIM) theory and Non-Covalent Interactions (NCI) index. The obtained results were summarized as the generalized, empirical model of the composite substituent effect, assessed using an additional group of simple ring-based Schiff bases. The composite substituent effect has been divided into separate increments describing the different interactions of the hydrogen bridge and the substituent: the classical substituent effect, involving resonance and induction mediated through the ring, steric increment based on substituent proximity to the bridge elements, and distal increment, derived from substitution on the distal ring.

Effects of functional groups and side chains on assembly of "X"-shaped new aggregation-induced emission molecules

The self-assembly properties of aggregation-induced emission molecules play important roles in electroluminescence devices and fluorescence sensors because noncovalent interactions in self-assembly structures would accelerate the excitation energy consumption. However, there are only few studies to explore their self-assembly properties on the interface and there is still a great need for further understanding self-assembled mechanisms from the viewpoint of molecular design. Here, we presented three X-shaped aggregation-induced emission molecules X1, X2 and X3, which decorated with different functional groups and alkyl side chains. The self-assembly structures were revealed by scanning tunneling microscopy technique in combination with density functional theory. Results showed that X-shaped molecules self-assembled into different structures, depending on their molecular structure, especially the functional groups. Furthermore, self-assembly structures could be regulated by adjusting solution concentration. In more detail, parallel with gradually increasing solution concentration, the molecules approached closer and molecule-molecule interactions were enhanced, finally resulting in new nanostructures. The self-assembly properties of three X-shaped aggregation-induced emission molecules on the liquid/solid interface would give a guidance for further exploring the aggregation state in three-dimensional space. Meanwhile, the two-dimensional nanostructures might show special properties, which could be used in fabricating next generation functional films.

A dual-channel indicator of fish spoilage based on a D-π-A luminogen serving as a smart label for intelligent food packaging

Advances in food monitoring benefit tremendously from the naked-eye observation and device-miniaturization of colorimetric and fluorometric methods. Intelligent food packaging, containing a built-in sensor inside food bags, is capable of real-time monitoring of food quality by visibly discernible out-put signals, which effectively ensures food safety. We synthesized a donor-π-acceptor (D-π-A) compound DPABA, and disclosed its fluorescence response to amines. According to quantum chemical calculations, DPABA is apt to D-A coupling in aggregated state, causing the formation of exciplex/excimer together with intermolecular charge/energy transfer to the disadvantage of light emission; while the evasion of amine vapors would decouple the intermolecular D-A interactions to induce stronger emission with shorter wavelength. Utilizing the amine vapor generated by fish, DPABA can serve as an indicator for freshness monitoring. To create an intelligent food package, the compound was made into cellulose film, which was further cut into smart labels to be encapsulated into food bags. The as-prepared smart label exhibits red color under ambient light and glows weak red emission under UV light, while it turns into faint yellow color in response to putrid fish, and its emission changes to bright cyan. The output signals can be accurately recorded by instrument, and detected by naked eye, suggesting high signal contrast. In addition, the smart label exhibits different changing scope in response to different degree of freshness, showing high potential for in-field detection.

A donor-π-acceptor aggregation-induced emission compound serving as a portable fluorescent sensor for detection and differentiation of methanol and ethanol in the gas phase

The design strategy of aggregation-induced emission (AIE) fluorophores with donor-π-acceptor (D-π-A) conjugation structure has greatly contributed to the development of luminescent materials and devices, including volatile organic compounds (VOCs) sensors. In this work, a D-π-A fluorophore DEBAB was synthesized, showing both AIE and intramolecular charge transfer (ICT) properties as confirmed by spectroscopic data and quantum chemical calculations. Furthermore, there is notable emission-enhancement when DEBAB is exposed to small-molecule alcohols, such as methanol and ethanol. Based on this phenomenon, a portable film sensor was fabricated, capable of detecting methanol and ethanol in gas phase, with detection limit (DL) as low as 8.02 ppm. Our systematic investigation suggests that hydrogen-bonding may be formed between DEBAB and alcohols, intensifying the AIE efficacy while influencing the ICT process. This working mechanism is supported by density functional theory (DFT) calculations including electrostatic potential mapping and molecular total energy. In addition, a sensor array was fabricated on a cellulose paper strip, showing different levels of emission changing in response to alcohols. Thus the detection and differentiation of methanol and ethanol are enabled.

Substituent Effect on the Photophysics and ESIPT Mechanism of N,N'-Bis(salicylidene)-p-phenylenediamine: A DFT/TD-DFT Analysis

Excited-state intramolecular proton transfer (ESIPT) and intramolecular charge transfer (ICT) processes are widely exploited in the designing of organic materials for multifarious applications. This work explores the aftereffects of combining both ESIPT and ICT events in a single molecule, namely, N,N'-bis(salicylidene)-p-phenylenediamine (BSP) exploiting DFT and TD-DFT formalisms. The PBE0 functional employed in the present study is found to yield results with better accuracy for excited-state calculations. The results reveal that introduction of electron donor (-NH₂) and electron acceptor (-NO₂) substituents on BSP produces a strikingly red-shifted emission with respect to the corresponding emission from the unsubstituted analogue in polar solvents. This red-shifted emission originated due to the coupled effect of ESIPT and planar-ICT (PICT) processes from the coplanar geometry adopted by the substituted molecule (s-BSP). Based on the computed potential energy curves, the ground-state intramolecular proton transfer (GSIPT) was found to take place more favorably in s-BSP than in BSP under all solvent conditions. In the case of ESIPT, the barrier and relative energies of the phototautomers of s-BSP were slightly higher than BSP, which shows that simultaneous substitution of -NH₂ and -NO₂ groups causes slight perturbation to the ESIPT process. Overall, the computed results show that simultaneous substitution of suitable electron donor and acceptor substituents provides profitable changes in the photophysical properties of ESIPT molecules like BSP. These molecular-level insights will pave way for designing better materials for diverse applications.

Flavanone-Based Fluorophores with Aggregation-Induced Emission Enhancement Characteristics for Mitochondria-Imaging and Zebrafish-Imaging

Fluorophores with aggregation-induced emission enhancement (AIEE) characteristics applied in bioimaging have attracted more and more attention in recent years. In this work, a series of flavanone compounds with AIEE characteristics was developed and applied to fluorescence imaging of mitochondria and zebrafish. The compounds were readily prepared by the thermal dehydration of chalcone that was obtained by the reaction of o-hydroxyacetophenone and benzaldehyde. Two of these compounds showed significant AIEE characteristics by fluorescence performance experiments, including optical spectra, fluorescence spectra, fluorescence quantum yield (φ_F), fluorescence lifetime, and scanning electron microscopy (SEM). Compared with traditional organic fluorescent dyes, these compounds have high fluorescence emission and high fluorescence quantum yield in solid or aggregated state, which overcomes the shortcoming of aggregation-caused quenching (ACQ). More importantly, the two compounds exhibited low cytotoxicity and good cytocompatibility in A549 lung cells at the experimental concentration range and they specifically targeted mitochondria, which make it of great potential use in mitochondria labeling. In addition, they were embryonic membrane permeable and had different affinities for different tissues and organs of zebrafish, but mainly distributed in the digestive system, providing a basis for the application of such compounds in bioimaging. These AIEE compounds with superior properties could be of great potential use in mitochondria imaging and other in vivo studies.

Stimuli-Responsive Purely Organic Room-Temperature Phosphorescence Materials

This Minireview summarizes the recent progress of stimuli-responsive purely organic phosphorescence materials. Organic phosphorescence is closely related to the intermolecular interactions, because such interactions are beneficial to promote spin orbital coupling (SOC) and boost intersystem cross (ISC) efficiency and finally are conducive to satisfactory phosphorescence. It is found that the intermolecular interactions, which are essential for organic phosphorescence, are easily disturbed by external stimuli such as mechanical force, photon, acid, chemical vapor, leading to the luminescence change. According to this principle, various purely organic phosphorescence materials sensitive to external stimuli have been developed. This Minireview categorizes reported stimuli-responsive purely organic phosphorescence materials on the basis of different stimuli, including mechanochromism, mechanoluminescence, photoactivity, acid-responsiveness and other stimuli. Some prospective strategies for constructing stimuli-responsive purely organic phosphorescence molecules are provided.

Self-Assembly of Aggregation-Induced-Emission Molecules

The last decade has witnessed rapid developments in aggregation-induced emission (AIE). In contrast to traditional aggregation, which causes luminescence quenching (ACQ), AIE is a reverse phenomenon that allows robust luminescence to be retained in aggregated and solid states. This makes it possible to fabricate various highly efficient luminescent materials, which opens new paradigms in a number of fields, such as imaging, sensing, medical therapy, light harvesting, light-emitting devices, and organic electronic devices. Of the various important features of AIE molecules, their self-assembly behavior is very attractive because the formation of a well-defined emissive nanostructure may lead to advanced applications in diverse fields. However, due to the nonplanar topology of AIEgens, it is not easy for them to self-assemble into well-defined structures. To date, some strategies have been proposed to achieve the self-assembly of AIEgens. Herein, we summarize the most recent approaches for the self-assembly of AIE molecules. These approaches can be sorted into two classes: 1) covalent molecular design and 2) noncovalent supramolecular interactions. We hope this will inspire more excellent work in the field of AIE.

Tuning the aggregation performance by varying the substituent position: comparative study of neutral bis-urea derivatives in aqueous medium

A set of three neutral bis-urea derivatives has been purposefully chosen to investigate the consequences of positional isomers on the aggregation performance.

Effect of substituent position on aggregation-induced emission, customized self-assembly, and amine detection of donor-acceptor isomers: Implication for meat spoilage monitoring

We synthesized a class of positional isomers by attaching electron donor and acceptor units in different sites of a conjugated core. These isomers exhibit both aggregation-induced emission (AIE) and intramolecular charge transfer (ICT) effects, which are proved by adequate spectroscopic analysis. Their structure-property relationships were systematically studied. We found that relocation of the D/A units would have remarkable impact on the intermolecular dipole-dipole interaction, further controlling the shape and color of the self-assembled architectures. With D/A units shifting to different sites, four types of the structures appear sequentially, including quadrate microsheets, microrods, nanofilaments and nanowires. Furthermore, the A unit (benzoic acid moiety) of the AIE isomers is easy to adsorb amines, leading to changes in both emission wavelength and intensity. Then a portable sensor is prepared on solid support based on the self-assembled architecture of HMBA-4, which has been proved to be the most sensitive to amines. It affords fast spectral responses as well as a low detection limit of 186 Pa (vapour pressure). The sensing mechanism was revealed by density functional theory (DFT) calculation, which indicates that the spectral responses stem from the weakened ICT effect. The sensor is able to detect amine vapours generated by meat, and thus succeeds in detecting the spoiled pork samples, offering high potential for meat spoilage monitoring in real-world applications.

Structural and computational understanding of weak interactions in “bridge-flipped” isomeric tetrafluoro-bis-benzylideneanilines

Structural and computational insights into inter-molecular interactions in isomeric bridge-flipped tetrafluoro-bis-benzylideneanilines.

Aggregation Induced Emission Fluorogens Light Cells via Microtubules: Accessing the Mechanisms of Intracellular Trafficking of Ionic Substances

Understanding the enrichment and intracellular trafficking of substances is centrally important to the biological systems. Here, employing an amphiphilic molecule (denoted by TPE-11) bearing tetraphenylethene moiety, known for aggregation induced emission property, we demonstrated its localization shifting in Hela cells after prolonged incubation. Through a set of delicately designed experiments, we found that one type of cytoskeleton, i.e., microtubule, is responsible for the intracellular transportation regardless of the sources of fluorogens, via endocytosis pathways or not. As the polymerization of microtubules was blocked, the TPE-11 fluorogens were hindered to move to the inner cytoplasm, but scattered in the cells. On the contrary, blocking the polymerization of microfilament has no such effect. We assume that the dynamic polymerization of microtubules should be responsible to the transportation of TPE-11. More importantly, we found that the interaction between TPE-11 and microtubule proteins also happens during process of polymerization in vitro. The intracellular trafficking of TPE-11 by microtubules may be generalized to other amphiphilic molecules as well as endocytosis pathway, and serves as references in designing functional molecules involved in the intracellular transportation.

Aggregation induced enhanced and exclusively highly Stokes shifted emission from an excited state intramolecular proton transfer exhibiting molecule

The inner filter effect due to self-quenching dominates the normal emission of dyes at higher concentrations, which would limit their applications. Since normal emission was also observed with aggregation induced emission enhancement (AIEE) active excited state intramolecular proton transfer (ESIPT) exhibiting molecules, two new molecules are synthesized and studied to obtain normal emission free AIEE. The molecules are 4-(3-(benzo[d]thiazol-2-yl)-5-tert-butyl-4-hydroxybenzyl)-2-(benzo[d]thiazol-2-yl)-6-tert-butyl phenol (bis-HPBT) and its oxazole analogue (bis-HPBO). Of these molecules, bis-HPBT, which is weakly fluorescent in tetrahydrofuran solution, shows a sudden high enhancement in fluorescence upon addition of 70% water due to the formation of aggregates. Though the normal emission is also observed in tetrahydrofuran, it is completely eliminated in the aggregates, and the aggregates display exclusive tautomer emission. However, bis-HPBO does not emit such an exclusive tautomer emission in the water/tetrahydrofuran mixture. The enhancement in the fluorescence quantum yield of bis-HPBT in 70% water is ∼300 times higher than that in tetrahydrofuran. The modulated molecular structure of bis-HPBT is the cause of this outstanding AIEE. The observation of almost exclusive tautomer emission is a new additional advantage of AIEE from bis-HPBT over other ESIPT molecules. Since the tautomer emission is highly Stokes shifted, no overlap with the absorption spectrum occurs and therefore, the inner filter effect is averted. The aggregated structure acts as a good fluorescence chemosensor for metal ions as well as anions. The aggregated structure is cell permeable and can be used for cell imaging.

Excited-State Intramolecular Proton-Transfer Properties of Three Tris(N-Salicylideneaniline)-Based Chromophores with Extended Conjugation

The synthesis and photophysical properties of three tris(N-salicylideneaniline) (TSA) compounds containing 1,3,5-triarylbenzene, -tristyrylbenzene, and -tris(arylethynyl)benzene core units are reported. The TSA compounds underwent efficient excited-state intramolecular proton transfer (ESIPT) in solution and in solid state due to the preformed C=N⋅⋅⋅H-O hydrogen-bonded motifs of the structures. Steady-state fluorescence emission spectra of the TSA molecules revealed dual bands only in DMSO, and large Stokes shifts in other polar aprotic and protic solvents. Femtosecond transient absorption spectroscopic measurements in THF revealed lifetime values in the range of 14-16 ps for the excited-state keto-tautomer. The TSA compounds are also responsive to metal ions (Cu²⁺ and Zn²⁺ ) in DMSO, exhibit enhanced aggregate-induced emission (AIE) properties in DMSO/water mixtures, and are highly luminescent in the solid state.

Aggregation induced enhanced emission of 2-(2'-hydroxyphenyl)benzimidazole

In this study, the aggregation induced emission enhancement (AIEE) of 2-(2'-hydroxyphenyl)benzimidazole (HPBI) is reported. To investigate the AIEE process of HPBI, absorption/fluorescence spectroscopy, fluorescence imaging and field emission scanning electron microscopy were employed. A comparative study with 2-phenylbenzimidazole (PBI) divulges the significance of the hydroxyl group in the AIEE process. Further, molecular dynamics simulations have been carried out with explicit solvent molecules to follow the aggregation process of HPBI with time. The obtained molecular dynamics simulation results not only predicted the formation of aggregates but also provided detailed insight and information on the molecular interactions. The cellular studies showed aggregates yield higher fluorescence in the visible region inside HeLa cells in comparison to monomeric compounds which failed to exhibit any visible fluorescence inside the cell. The obtained aggregates were further found to be biocompatible and therefore can be used for bio-imaging applications.

Excited-state intramolecular proton-transfer (ESIPT)-inspired solid state emitters

Solid state emitters based on excited state intramolecular proton transfer (ESIPT) have been attracting considerable interest since the past few years in the field of optoelectronic devices because of their desirable unique photophysical properties. The photophysical properties of the solid state ESIPT fluorophores determine their possible applicability in functional materials. Less fluorescence quantum efficiencies and short fluorescence lifetime in the solid state are the shortcomings of the existing ESIPT solid state emitters. Designing of ESIPT chromophores with high fluorescence quantum efficiencies and a long fluorescence lifetime in the solid state is a challenging issue because of the unclear mechanism of the solid state emitters in the excited state. Reported design strategies, detailed photophysical properties, and their applications will help in assisting researchers to overcome existing challenges in designing novel solid state ESIPT fluorophores for promising applications. This review highlights recently developed solid state ESIPT emitters with focus on molecular design strategies and their photophysical properties, reported in the last five years.

Elucidating Electrostatic Self-Assembly: Molecular Parameters as Key to Thermodynamics and Nanoparticle Shape

The rational design of supramolecular nanoparticles by self-assembly is a crucial field of research due to the wide applications and the possibility of control through external triggers. Understanding the shape-determining factors is the key for tailoring nanoparticles with desired properties. Here, we show how the thermodynamics of the interaction control the shape of the nanoparticle. We highlight the connection between the molecular structure of building blocks, the interaction strength, and the nanoassembly shape. Nanoparticles are prepared by electrostatic self-assembly of cationic polyelectrolyte dendrimers of different generations and oppositely charged multivalent organic dyes relying on the combination of electrostatic and π-π interactions. Different building blocks have been used to vary interaction strength, geometric constraints, and charge ratio, providing insights into the assembly process. The nanoassembly structure has been characterized using atomic force microscopy, static light scattering, small angle neutron scattering, and UV-vis spectroscopy. We show that the isotropy/anisotropy of the nanoassemblies is related to the dye valency. Isothermal titration calorimetry has been used to investigate both dye-dye and dye-dendrimer interaction. The existence of a threshold value in entropy and enthalpy change separating isotropic and anisotropic shapes for both interactions has been demonstrated. The effects of the dye molecular structure on the interaction thermodynamics and therefore on the nanoparticle structure have been revealed using molecular modeling. The polar surface area of the dye molecule takes a key role in the dye self-interaction. This study opens the possibility for a priori shape determination knowing the building blocks structure and their interactions.

Synthesis, optical properties, and helical self-assembly of a bivaline-containing tetraphenylethene

A chiral tetraphenylethene derivative with two valine-containing attachments (TPE-DVAL), was synthesized by Cu(I)-catalyzed azide-alkyne "click" reaction. The optical properties and self-assembling behaviours of TPE-DVAL were investigated. The molecule is non-emissive and circular dichroism (CD)-silent in solution, but shows strong fluorescence and Cotton effects in the aggregation state, demonstrating aggregation-induced emission (AIE) and CD (AICD) characteristics. TPE-DVAL exhibits good circularly polarized luminescence (CPL) when depositing on the surface of quartz to allow the evaporation of its 1,2-dichloroethane solution. SEM and TEM images of the molecule show that the molecule readily self-assembles into right-handed helical nanofibers upon the evaporation of its solvent of DCE. The molecular alignments and interactions in assembling process are further explored through XRD analysis and computational simulation. The driving forces for the formation of the helical fibers were from the cooperative effects of intermolecular hydrogen bonding, π-π interactions and steric effect.

Aggregation induced emission controlled by a temperature-sensitive organic–inorganic hybrid polymer with a particular LCST

The fluorescence intensity change of TPE encapsulated in POSS–PNIPAM with a particular LCST (37.5 °C) with the temperature change.

A Simple Fluorescence Probe Based on Aggregation-Induced Emission (AIE) Property for the Detection of Mg(2+) Ions

A simple aggregation-induced emission-based fluorescence probe (1) for Mg(2+) was synthesized by condensation of benzene-1, 2-diamine with 5-bromo-2-hydroxybenzaldehyde, This compound shows favourable character of the AIE-active molecules. More importantly, after addition of Mg(2+) to probe (1) in acetonitrile, the solution changed from colorless to yellow colour solution under ultraviolet (UV) radiation obtained from hand-held UV lamp, this finding suggested that probe (1) can be used to detect Mg(2+) by colorimetric detection. Detection limit can reach 2.31 × 10(-5) M(-1). The practical value of the selective and sensitive fluorescence indicators was confirmed by its application to detection of magnesium ion in acetonitrile.

Dual-emission fluorescent sensor based on AIE organic nanoparticles and Au nanoclusters for the detection of mercury and melamine

A novel dual-emission ratiometric fluorescence probe is designed and developed by linking two parts, positively charged aggregation-induced emission (AIE) organic fluorescence nanoparticles (OFNs) as the reference and negatively charged Au nanoclusters (Au NCs) as the response, by electrostatic attraction for the first time. This probe can be used for not only visual but quantitative determination of Hg(2+) as well as melamine, because red fluorescence of Au NCs can be quenched by mercury ions and recovered by melamine, due to the strong affinity metallophilic Hg(2+)-Au interaction and stronger affinity Hg(2+)-N. During this process, the green fluorescence of AIE-OFNs remains constant owing to the protection of ε-polylysine (ε-Ply). In addition, the prepared dual-emission ratiometric fluorescence probe has good biocompatibility, indicating the potential of the probe in applications of biological imaging and detection. The results revealed that this dual-emission ratiometric fluorescence probe broadens the application of AIE-based organic fluorescent nanoparticles, and presents a new method to prepare more sensitive, biocompatible, and visual ratiometric fluorescent probes.

Highly Emissive Nanoparticles Based on AIE-Active Molecule and PAMAM Dendritic "Molecular Glue"

The highly emissive nanoparticles Gn-TCMPE (n = 0-4) were prepared by using PAMAM dendrimers as "molecular glue" to adhere an AIE-active molecule tetra(4-(carboxymethoxy)phenyl)ethylene (TCMPE). The electrostatic interaction of ammonium-carboxylate ion pairs provides a driving force between TCMPE and PAMAM dendrimers to form the nanoparticles Gn-TCMPE (n = 0-4), which is validated by the FTIR and (1)H NMR spectra. The formation of nanoparticles dramatically blocks the nonradiative pathway and enhances the fluorescence of TCMPE. The quantum yields of Gn-TCMPE gradually boost at first and then reach to a plateau with increasing the generation of PAMAM dendrimers, and the highest absolute quantum yields are obtained to be 0.42 and 0.64 for Gn-TCMPE (n = 2-4) in methanol dispersion and solid phases, respectively. The fluorescence of the nanoparticles can be tuned by addition of trifluoroacetic acid (TFA). Furthermore, the G4-TCMPE has been successfully applied to selectively image cytoplasm of Hela cells with excellent photostability and low cytotoxicity. This study provides a novel noncovalent strategy for developing highly emissive and robust organic materials fitting for cell fluorescence imaging.

Light emission properties and self-assembly of a tolane-based luminogen

Fluorescent micro/nanostructures were formed by self-assembly of a tolane derivative with intramolecular charge transfer and aggregation-induced emission properties.

Stimuli responsive reversible high contrast off–on fluorescence switching of simple aryl-ether amine based aggregation-induced enhanced emission materials

Aryl-ether amine based simple Schiff base molecules showed rare stimuli responsive off–on fluorescence switching with high contrast.

Molecular amorphous glasses toward large azomethine crystals with aggregation-induced emission

Imine compounds containing rigid cores and soft aliphatic tails have been designed to generate molecular glasses and large crystals displaying aggregation-induced emission, which makes them interesting candidates for optoelectronic applications.

Multiple optical properties of a naphthoquinone pigment: 2-methyl-3-(hydroxyphenylthio)-1,4-naphthalenedione

Naphthoquinone pigments 2-methyl-3-(4- or 2-hydroxyphenylthio)-1,4-naphthalenedione show characteristic optical properties in solution and in the solid state. The position of the OH group in the pigment leads to varied optical properties, including a characteristic colour, in the solid state. The pigment with a 2-OH substituent displays solvatochromism in solution, and that with a 4-OH substituent displays optical chirality in the solid state.

Multi-color cell imaging under identical excitation conditions with salicylideneaniline analogue-based fluorescent nanoparticles

Multi-color cell imaging under identical excitation conditions is realized with fluorescent nanoparticles of salicylideneaniline analogues.