Control of the morphology of lipid layers by substrate surface chemistry

A two-step mechanism for the binding of the HIV-1 MPER epitope by the 10E8 antibody onto biosensor-supported lipid bilayers

HIV-1 antibodies targeting the carboxy-terminal area of the membrane-proximal external region (ctMPER) are close to exerting viral pan-neutralization. Here, we reconstituted the ctMPER epitope as the N-terminal extremity of the Env glycoprotein transmembrane domain helix and immobilized it onto biosensor-supported lipid bilayers. We assessed the binding mechanism of anti-MPER antibody 10E8 through Surface Plasmon Resonance, and found, through equilibrium and kinetic binding analyses as a function of bilayer thickness, peptide length, and paratope mutations, that 10E8 engages first with the epitope peptide (encounter), limited by ctMPER helix accessibility at the membrane surface, and then inserts into the lipid bilayer assisted by favorable Fab-membrane interactions (docking). This mechanistic information may help in devising new strategies to develop more efficient MPER-targeting vaccines.

Functional Delineation of a Protein-Membrane Interaction Hotspot Site on the HIV-1 Neutralizing Antibody 10E8

Antibody engagement with the membrane-proximal external region (MPER) of the envelope glycoprotein (Env) of HIV-1 constitutes a distinctive molecular recognition phenomenon, the full appreciation of which is crucial for understanding the mechanisms that underlie the broad neutralization of the virus. Recognition of the HIV-1 Env antigen seems to depend on two specific features developed by antibodies with MPER specificity: (i) a large cavity at the antigen-binding site that holds the epitope amphipathic helix; and (ii) a membrane-accommodating Fab surface that engages with viral phospholipids. Thus, besides the main Fab-peptide interaction, molecular recognition of MPER depends on semi-specific (electrostatic and hydrophobic) interactions with membranes and, reportedly, on specific binding to the phospholipid head groups. Here, based on available cryo-EM structures of Fab-Env complexes of the anti-MPER antibody 10E8, we sought to delineate the functional antibody-membrane interface using as the defining criterion the neutralization potency and binding affinity improvements induced by Arg substitutions. This rational, Arg-based mutagenesis strategy revealed the position-dependent contribution of electrostatic interactions upon inclusion of Arg-s at the CDR1, CDR2 or FR3 of the Fab light chain. Moreover, the contribution of the most effective Arg-s increased the potency enhancement induced by inclusion of a hydrophobic-at-interface Phe at position 100c of the heavy chain CDR3. In combination, the potency and affinity improvements by Arg residues delineated a protein-membrane interaction site, whose surface and position support a possible mechanism of action for 10E8-induced neutralization. Functional delineation of membrane-interacting patches could open new lines of research to optimize antibodies of therapeutic interest that target integral membrane epitopes.

Surface Plasmon Resonance Monitoring of Mono-Rhamnolipid Interaction with Phospholipid-Based Liposomes

The interactions of mono-rhamnolipids (mono-RLs) with model membranes were investigated through a biomimetic approach using phospholipid-based liposomes immobilized on a gold substrate and also by the multiparametric surface plasmon resonance (MP-SPR) technique. Biotinylated liposomes were bound onto an SPR gold chip surface coated with a streptavidin layer. The resulting MP-SPR signal proved the efficient binding of the liposomes. The thickness of the liposome layer calculated by modeling the MP-SPR signal was about 80 nm, which matched the average diameter of the liposomes. The mono-RL binding to the film of the phospholipid liposomes was monitored by SPR and the morphological changes of the liposome layer were assessed by modeling the SPR signal. We demonstrated the capacity of the MP-SPR technique to characterize the different steps of the liposome architecture evolution, i.e., from a monolayer of phospholipid liposomes to a single phospholipid bilayer induced by the interaction with mono-RLs. Further washing treatment with Triton X-100 detergent left a monolayer of phospholipid on the surface. As a possible practical application, our method based on a biomimetic membrane coupled to an SPR measurement proved to be a robust and sensitive analytical tool for the detection of mono-RLs with a limit of detection of 2 μg mL^-1.

Theory of cell membrane interaction with glass

There are three regimes of cell membrane interaction with glass: Tight and loose adhesion, separated by repulsion. Explicitly including hydration, this paper evaluates the pressure between the surfaces as functions of distance for ion correlation and ion-screened electrostatics and electromagnetic fluctuations. The results agree with data for tight adhesion energy (0.5-3 vs 0.4-4 mJ/m^{2}), detachment pressure (7.9 vs. 9 MPa), and peak repulsion (3.4-7.5 vs. 5-10 kPa), also matching the repulsion's distance dependence on renormalization by steric pressure mainly from undulations.

In situ analysis of liposome hard and soft protein corona structure and composition in a single label-free workflow

Methodological constraints have limited our ability to study protein corona formation, slowing nanomedicine development and their successful translation into the clinic. We determined hard and soft corona structural properties along with the corresponding proteomic compositions on liposomes in a label-free workflow: surface plasmon resonance and a custom biosensor for in situ structure determination on liposomes and corona separation, and proteomics using sensitive nanoliquid chromatography tandem mass spectrometry with open-source bioinformatics platforms. Undiluted human plasma under dynamic flow conditions was used for in vivo relevance. Proof-of-concept is presented with a regular liposome formulation and two light-triggered indocyanine green (ICG) liposome formulations in preclinical development. We observed formulation-dependent differences in corona structure (thickness, protein-to-lipid ratio, and surface mass density) and protein enrichment. Liposomal lipids induced the enrichment of stealth-mediating apolipoproteins in the hard coronas regardless of pegylation, and their preferential enrichment in the soft corona of the pegylated liposome formulation with ICG was observed. This suggests that the soft corona of loosely interacting proteins contributes to the stealth properties as a component of the biological identity modulated by nanomaterial surface properties. The workflow addresses significant methodological gaps in biocorona research by providing truly complementary hard and soft corona compositions with corresponding in situ structural parameters for the first time. It has been designed into a convenient and easily reproducible single-experiment format suited for preclinical development of lipid nanomedicines.

Dendron-Functionalized Surface: Efficient Strategy for Enhancing the Capture of Microvesicles

Microvesicles (MVs) are used by various types of cells in the human body for intercellular communication, making them biomarkers of great potential for the early and non-evasive diagnosis of a spectrum of diseases. An integrated analysis including morphological, quantitative, and compositional studies is most desirable for the clinical application of MV detection; however, such integration is limited by the currently available analysis techniques. In this context, exploiting the phosphatidylserine (PS) exposure of MVs, we synthesized a series of dendritic molecules with PS-binding sites at the periphery. PS-dendron binding was studied at the molecular level using NMR approaches, whereas PS-containing membrane-dendron interaction was investigated in an aqueous environment using plasmon waveguide resonance spectroscopy. As a proof of concept, polyethylene terephthalate surface was functionalized with the synthetic dendrons, forming devices that can capture MVs to facilitate their subsequent analyses.

•

Phosphatidylserine-dendron interaction studies with NMR techniques

•

Lipid membrane binding enhancement using dendritic molecules

•

Dendron-grafted material for effective MV capture

Biophysical Characterization of Supported Lipid Bilayers Using Parallel Dual-Wavelength Surface Plasmon Resonance and Quartz Crystal Microbalance Measurements

Supported lipid bilayers (SLBs) have been used extensively as an effective model of biological membranes, in the context of in vitro biophysics research, and the membranes of liposomes, in the context of the development of nanoscale drug delivery devices. Despite numerous surface-sensitive techniques having been applied to their study, the comprehensive optical characterization of SLBs using surface plasmon resonance (SPR) has not been conducted. In this study, Fresnel multilayer analysis is utilized to effectively calculate layer parameters (thickness and refractive indices) with the aid of dual-wavelength and dispersion coefficient analysis, in which the linear change in the refractive index as a function of wavelength is assumed. Using complementary information from impedance-based quartz crystal microbalance experiments, biophysical properties, for example, area-per-lipid-molecule and the quantity of lipid-associated water molecules, are calculated for different lipid types and mixtures, one of which is representative of a raft-forming lipid mixture. It is proposed that the hydration layer beneath the bilayer is, in fact, an integral part of the measured optical signal. Also, the traditional Jung model analysis and the ratio of SPR responses are investigated in terms of assessing the structure of the lipid layer that is formed.

pH-Controlled Liposomes for Enhanced Cell Penetration in Tumor Environment

An innovative pH-switchable colloidal system that can be exploited for site-selective anticancer drug delivery has been generated by liposome decoration with a new novel synthetic non-peptidic oligo-arginine cell-penetration enhancer (CPE) and a quenching PEGylated counterpart that detaches from the vesicle surface under the acidic conditions of tumors. The CPE module ( Arg₄- DAG) is formed by four arginine units conjugated to a first-generation (G1) 2,2-bis(hydroxymethyl)propionic acid (bis-MPA)/2,2-bis(aminomethyl)propionic acid (bis-AMPA) polyester dendron terminating with 1,2-distearoyl-3-azidopropane for liposome bilayer insertion. The zeta potential of the Arg₄- DAG-decorated liposomes increased up to +32 mV as the Arg₄- DAG/lipids molar ratio increased. The Arg₄- DAG liposome shielding at pH 7.4 was provided by methoxy-PEG_5 kDa-polymethacryloyl sulfadimethoxine (mPEG_5 kDa-SDM₈) with 7.1 apparent p K_a. Zeta potential, surface plasmon resonance and synchrotron small-angle X-ray scattering analyses showed that at pH 7.4 mPEG_5 kDa-SDM₈ associates with polycationic Arg₄- DAG-decorated liposomes yielding liposomes with neutral zeta potential. At pH 6.5, which mimics the tumor environment, mPEG_5 kDa-SDM₈ detaches from the liposome surface yielding Arg₄- DAG exposure. Flow cytometry and confocal microscopy showed a 30-fold higher HeLa cancer cell association of the Arg₄- DAG-decorated liposomes compared to non-decorated liposomes. At pH 7.4, the mPEG_5 kDa-SDM₈-coated liposomes undergo low cell association while remarkable cell association occurred at pH 6.5, which allowed for the controlled intracellular delivery of model macromolecules and small molecules loaded in the liposome under tumor conditions.

Exploring Molecular-Biomembrane Interactions with Surface Plasmon Resonance and Dual Polarization Interferometry Technology: Expanding the Spotlight onto Biomembrane Structure

The molecular analysis of biomolecular-membrane interactions is central to understanding most cellular systems but has emerged as a complex technical challenge given the complexities of membrane structure and composition across all living cells. We present a review of the application of surface plasmon resonance and dual polarization interferometry-based biosensors to the study of biomembrane-based systems using both planar mono- or bilayers or liposomes. We first describe the optical principals and instrumentation of surface plasmon resonance, including both linear and extraordinary transmission modes and dual polarization interferometry. We then describe the wide range of model membrane systems that have been developed for deposition on the chips surfaces that include planar, polymer cushioned, tethered bilayers, and liposomes. This is followed by a description of the different chemical immobilization or physisorption techniques. The application of this broad range of engineered membrane surfaces to biomolecular-membrane interactions is then overviewed and how the information obtained using these techniques enhance our molecular understanding of membrane-mediated peptide and protein function. We first discuss experiments where SPR alone has been used to characterize membrane binding and describe how these studies yielded novel insight into the molecular events associated with membrane interactions and how they provided a significant impetus to more recent studies that focus on coincident membrane structure changes during binding of peptides and proteins. We then discuss the emerging limitations of not monitoring the effects on membrane structure and how SPR data can be combined with DPI to provide significant new information on how a membrane responds to the binding of peptides and proteins.

Nanoplasmonic Sensing and Capillary Electrophoresis for Fast Screening of Interactions between Phosphatidylcholine Biomembranes and Surfactants

Nanoplasmonic sensing (NPS), based on localized surface plasmon resonance, with sensors composed of glass covered with golden nanodisks and overlaid with a SiO2 coating was applied in this study. Egg phosphatidylcholine (eggPC), being an easily accessible membrane-forming lipid, was used for preparation of biomimicking membranes. Small unilamellar vesicles with an approximate hydrodynamic diameter of 30 nm, formed by sonication in 4-(2-hydroxyethyl)piperazine-1-ethanesulfonic acid buffer, were adsorbed within 10 min on the sensor surface either as intact vesicles or as a planar bilayer. The adsorbed biomembrane systems were further utilized for interaction studies with four different well-known surfactants (negatively and positively charged, zwitterionic, and nonionic) and each surfactant was tested at concentrations below and above the critical micelle concentration (CMC). Our results allowed the evaluation of different NPS patterns for every particular supported membrane system, surfactant, and its concentration. The most significant effect on the membrane was achieved upon the introduction of zwitterionic surfactant micelles, which in fact completely solubilized and removed the lipid membranes from the sensor surface. Other surfactant micelles interacted with the membranes and formed mixed structures remaining on the sensor surface. The studies performed at the concentrations below the CMCs of the surfactants showed that different mixed systems were formed. Depending on the supported membrane system and the type of surfactant, the mixed systems indicated different formation kinetics. Additionally, the final water rinse revealed the stability of the formed systems. To investigate the effect of the studied surfactants on the overall surface charge of the biomembrane, capillary electrophoresis (CE) experiments were carried out in parallel with the NPS analysis. The electroosmotic flow mobility of an eggPC-coated fused silica capillary was used to measure the total surface charge of the biomembrane after its treatment with the surfactants. Our results indicated in general good correlation between CE and NPS data. However, some discrepancies were seen while applying either zwitterionic or positively charged surfactants. This confirmed that CE analysis was able to provide additional data about the investigated systems. Taken together, the combination of NPS and CE proved to be an efficient way to describe the nature of interactions between biomimicking membranes and amphiphilic molecules.

Carboxymethylated Dextran-Modified N-Heterocyclic Carbene Self-Assembled Monolayers on Gold for Use in Surface Plasmon Resonance Biosensing

Surface chemistry is a key enabler for various biosensing applications. Biosensors based on surface plasmon resonance routinely employ thiol-based chemistry for the linker layer between gold-coated support surfaces and functional biosensor surfaces. However, there is a growing awareness that such sensor surfaces are prone to oxidation/degradation problems in the presence of oxygen, and previous efforts to improve the stability have shown limited advancements. As an alternative, recent studies employing N-heterocyclic carbene (NHC) self-assembled monolayers (SAMs) deposited on gold have shown significant promise in this area. Here, we describe a sensor surface employing an NHC SAM to couple a modified carboxymethylated dextran onto a gold surface. Such a dextran matrix is also used for affinity chromatography, and it is the most commonly employed matrix for commercial biosensor surfaces today. The performance reliability of the dextran-modified NHC chip to act as an alternative biosensing platform is compared with that of a thiol-based commercial chip in the proof-of-concept tests. The resultant NHC sensor surface shows a higher thermal stability compared to thiol analogues. Moreover, the plasma protein/drug and antibody/antigen interactions were validated on the NHC-based dextran chip and showed similar performance as compared to the thiol-based commercial chip. Ultimately, this study shows the strong potential applicability of chemical modifications to gold surfaces using NHC ligands for biosensing applications.

Oligomerization Alters Binding Affinity Between Amyloid Beta and a Modulator of Peptide Aggregation

The soluble oligomeric form of the amyloid beta (Aβ) peptide is the major causative agent in the molecular pathogenesis of Alzheimer's disease (AD). We have previously developed a pyrroline-nitroxyl fluorene compound (SLF) that blocks the toxicity of Aβ. Here we introduce the multi-parametric surface plasmon resonance (MP-SPR) approach to quantify SLF binding and effect on the self-association of the peptide via a label-free, real-time approach. Kinetic analysis of SLF binding to Aβ and measurements of layer thickness alterations inform on the mechanism underlying the ability of SLF to inhibit Aβ toxicity and its progression towards larger oligomeric assemblies. Depending on the oligomeric state of Aβ, distinct binding affinities for SLF are revealed. The Aβ monomer and dimer uniquely possess sub-nanomolar affinity for SLF via a non-specific mode of binding. SLF binding is weaker in oligomeric Aβ, which displays an affinity for SLF on the order of 100 μM. To complement these experiments we carried out molecular docking and molecular dynamics simulations to explore how SLF interacts with the Aβ peptide. The MP-SPR results together with in silico modeling provide affinity data for the SLF-Aβ interaction and allow us to develop a new general method for examining protein aggregation.

Targeting Tumor-Associated Exosomes with Integrin-Binding Peptides

All cells expel a variety of nano-sized extracellular vesicles (EVs), including exosomes, with composition reflecting the cells' biological state. Cancer pathology is dramatically mediated by EV trafficking via key proteins, lipids, metabolites, and microRNAs. Recent proteomics evidence suggests that tumor-associated exosomes exhibit distinct expression of certain membrane proteins, rendering those proteins as attractive targets for diagnostic or therapeutic application. Yet, it is not currently feasible to distinguish circulating EVs in complex biofluids according to their tissue of origin or state of disease. Here we demonstrate peptide binding to tumor-associated EVs via overexpressed membrane protein. We find that SKOV-3 ovarian tumor cells and their released EVs express α3β1 integrin, which can be targeted by our in-house cyclic nonapeptide, LXY30. After measuring bulk SKOV-3 EV association with LXY30 by flow cytometry, Raman spectral analysis of laser-trapped single exosomes with LXY30-dialkyne conjugate enabled us to differentiate cancer-associated exosomes from non-cancer exosomes. Furthermore, we introduce the foundation for a highly specific detection platform for tumor-EVs in solution with biosensor surface-immobilized LXY30. LXY30 not only exhibits high specificity and affinity to α3β1 integrin-expressing EVs, but also reduces EV uptake into SKOV-3 parent cells, demonstrating the possibility for therapeutic application.

Using Diffusion To Characterize Interfacial Heterogeneity

We report on the use of molecular diffusional motion over a range of length scales to characterize compositional heterogeneity in monolayer structures. This work focuses on the diffusional motion of perylene in two types of films supported on functionalized silica surfaces: single-component (stearic acid) and two-component (hydrocarbon/fluorocarbon) films. Langmuir-Blodgett (LB) monolayers were deposited directly on silica or were bound to surface-modified silica by means of metal ion complexation. The LB films were characterized by their π-A isotherms and by Brewster angle microscopy (BAM) during formation and deposition. Chromophore mobility and monolayer structural heterogeneity were evaluated by comparing rotational diffusion data (fluorescence anisotropy decay imaging) and translational diffusion data (fluorescence recovery after photobleaching) on the same LB films. Our results indicate that the mobility of the chromophore depends sensitively on both metal ion identity and film composition.

Monitoring of single and double lipid membrane formation with high spatiotemporal resolution using evanescent light scattering microscopy

Formation and quality of single solid supported lipid membranes and double lipid membranes were investigated with single vesicle resolution using label-free evanescence light scattering microscopy (EvSM). For the formation of double lipid membranes we made use of electrostatic interaction between charged lipids and oppositely charged cations.

Controlled Immobilization Strategies to Probe Short Hyaluronan-Protein Interactions

Well-controlled grafting of small hyaluronan oligosaccharides (sHA) enables novel approaches to investigate biological processes such as angiogenesis, immune reactions and cancer metastasis. We develop two strategies for covalent attachment of sHA, a fast high-density adsorption and a two-layer system that allows tuning the density and mode of immobilization. We monitored the sHA adlayer formation and subsequent macromolecular interactions by label-free quartz crystal microbalance with dissipation (QCM-D). The modified surfaces are inert to unspecific protein adsorption, and yet retain the specific binding capacity of sHA. Thus they are an ideal tool to study the interactions of hyaluronan-binding proteins and short hyaluronan molecules as demonstrated by the specific recognition of LYVE-1 and aggrecan. Both hyaladherins recognize sHA and the binding is independent to the presence of the reducing end.

Investigating non-specific binding to chemically engineered sensor surfaces using liposomes as models

Clever surface engineering strategies lead to the minimization of non-specific binding of liposomes to sensor substrates.

Ionic liquids affect the adsorption of liposomes onto cationic polyelectrolyte coated silica evidenced by quartz crystal microbalance

The worldwide use of ionic liquids (ILs) is steadily increasing, and even though they are often referred to as "green solvents" they have been reported to be toxic, especially toward aquatic organisms. In this work, we thoroughly study two phosphonium ILs; octyltributylphosphonium chloride ([P8444]Cl) and tributyl(tetradecyl)phosphonium chloride ([P14444]Cl). Firstly, the critical micelle concentrations (CMCs) of the ILs were determined with fluorescence spectroscopy and the optical pendant drop method in order to gain an understanding of the aggregation behavior of the ILs. Secondly, a biomimicking system of negatively charged unilamellar liposomes was used in order to study the effect of the ILs on biomembranes. Changes in the mechanical properties of adsorbed liposomes were determined by quartz crystal microbalance (QCM) measurements with silica coated quartz crystal sensors featuring a polycation layer. The results confirmed that both ILs were able to incorporate and alter the biomembrane structure. The membrane disrupting effect was emphasized with an increasing concentration and alkyl chain length of the ILs. In the extreme case, the phospholipid membrane integrity was completely compromised.

Preserved transmembrane protein mobility in polymer-supported lipid bilayers derived from cell membranes

Supported lipid bilayers (SLBs) have contributed invaluable information about the physiochemical properties of cell membranes, but their compositional simplicity often limits the level of knowledge that can be gained about the structure and function of transmembrane proteins in their native environment. Herein, we demonstrate a generic protocol for producing polymer-supported lipid bilayers on glass surfaces that contain essentially all naturally occurring cell-membrane components of a cell line while still retaining transmembrane protein mobility and activity. This was achieved by merging vesicles made from synthetic lipids (PEGylated lipids and POPC lipids) with native cell-membrane vesicles to generate hybrid vesicles which readily rupture into a continuous polymer-supported lipid bilayer. To investigate the properties of these complex hybrid SLBs and particularly the behavior of their integral membrane-proteins, we used total internal reflection fluorescence imaging to study a transmembrane protease, β-secretase 1 (BACE1), whose ectoplasmic and cytoplasmic domains could both be specifically targeted with fluorescent reporters. By selectively probing the two different orientations of BACE1 in the resulting hybrid SLBs, the role of the PEG-cushion on transmembrane protein lateral mobility was investigated. The results reveal the necessity of having the PEGylated lipids present during vesicle adsorption to prevent immobilization of transmembrane proteins with protruding domains. The proteolytic activity of BACE1 was unadulterated by the sonication process used to merge the synthetic and native membrane vesicles; importantly it was also conserved in the SLB. The presented strategy could thus serve both fundamental studies of membrane biophysics and the production of surface-based bioanalytical sensor platforms.

Viscoelastic changes measured in partially suspended single bilayer membranes

For studies involving biomimetic phospholipid membrane systems, such as membrane-protein interactions, it is crucial that the supported membrane is biomimetic in its physical properties as well as in its composition. Two often overlooked aspects of biomimicry are the need for unrestrained lipid mobility, reflected in the viscoelastic properties of the membrane, and sufficient space between the membrane and the support for the insertion of transmembrane proteins. Here we show for a series of DMPC-based membranes that a partially suspended single bilayer membrane can be formed on functionalized gold surface without tethering. These membranes exhibit sufficient freedom of motion to represent the viscoelastic properties of a free lamellar bilayer membrane as demonstrated by determining the phase transition temperatures of these single bilayer membranes from the viscosity change upon chain melting using the dissipation signal of a quartz crystal microbalance (QCM-D). Atomic force microscopy imaging confirmed confluent, smooth membrane coverage of the QCM-D sensor that completely obscured the roughness of the sputtered gold surface. High-force AFM imaging was able to push membrane patches into the valleys of the gold morphology, confirming the inherently suspended nature of the MPA supported membrane. We show that the correlation between frequency and dissipation changes in the QCM-D sensograms is a sensitive indicator of the morphology of the membrane.

Understanding nanoparticle cellular entry: A physicochemical perspective

Understanding interactions between nanoparticles (NPs) with biological matter, particularly cells, is becoming increasingly important due to their growing application in medicine and materials, and consequent biological and environmental exposure. For NPs to be utilised to their full potential, it is important to correlate their functional characteristics with their physical properties, which may also be used to predict any adverse cellular responses. A key mechanism for NPs to impart toxicity is to gain cellular entry directly. Many parameters affect the behaviour of nanomaterials in a cellular environment particularly their interactions with cell membranes, including their size, shape and surface chemistry as well as factors such as the cell type, location and external environment (e.g. other surrounding materials, temperature, pH and pressure). Aside from in vitro and in vivo experiments, model cell membrane systems have been used in both computer simulations and physicochemical experiments to elucidate the mechanisms for NP cellular entry. Here we present a brief overview of the effects of NPs physical parameters on their cellular uptake, with focuses on 1) related research using model membrane systems and physicochemical methodologies; and 2) proposed physical mechanisms for NP cellular entrance, with implications to their nanotoxicity. We conclude with a suggestion that the energetic process of NP cellular entry can be evaluated by studying the effects of NPs on lipid mesophase transitions, as the molecular deformations and thus the elastic energy cost are analogous between such transitions and endocytosis. This presents an opportunity for contributions to understanding nanotoxicity from a physicochemical perspective.