Two-dimensional solid-state topochemical reactions of 10,12-pentacosadiyn-1-ol adsorbed on graphite

Impact of the Air Atmosphere on Photoinduced Chain Polymerization in Self-Assembled Monolayers of Diacetylene on Graphite

We have studied the effect of the reaction environment on the photoinduced chain polymerization in self-assembled monolayers of a diacetylene compound 10,12-pentacosadiyn-1-ol on graphite, using scanning tunneling microscopy. Comparing the polymerization behaviors in air and in vacuum, we show that the polymer generation efficiency is considerably enhanced under vacuum because of suppressed collisional quenching of the photoexcited radicals by oxygen molecules. We also find that the polymer chain length tends to increase in vacuum as a result of the inhibition of deactivation of reactive species for the polymer chain growth due to oxidation.

On-Surface Self-Assembled Structural Transformation Induced by Schiff Base Reaction and Hydrogen bonds

By utilizing scanning tunneling microscopy (STM), the self-assembled nanostructures of three characteristic aldehydes have been examined at the solution-solid interface. By introducing the active reactant 5-aminoisophthalic acid (5-AIPA), we succeeded in changing the self-assembled molecular structures through the condensation reaction and obtained the information on structural transformation in real time. The corresponding carboxyl conjugated derivatives were formed in situ and developed into the closely packed and ordered molecular architectures via hydrogen bonds at the solution-solid surface. The relevant simulations have been utilized to interpret the mechanisms of forming the nanostructures. The corresponding theoretical calculation is used to explain the reaction mechanism. Compared with the traditional ways, the on-surface condensation reaction in situ could not only provide a more convenient method for regulating the self-assembled architectures but also offer a promising strategy for building functional nanostructures and devices.

C-C Coupling Reactions for the Synthesis of Two-Dimensional Conjugated Polymers

Extension of conjugated polymers from 1D to 2D can not only significantly enhance the dissociation of charge and excitons, but also induce other advantages, such as high in-plane mechanical strength, large specific surface area and porosity, and more active centers. 2D conjugated polymers can be divided into C-C bonded 2D polymers based on C-C coupling reactions, and heteroatomic bonded 2D polymers based on reversible heteroatom coupling reactions. C-C bonded 2D polymers are generally more stable than heteroatomic bonded 2D polymers as the latter bonds are easily hydrolyzed. This Review mainly summarizes C-C coupling reactions that are suitable for synthesizing 2D conjugated polymers, and the properties of these 2D conjugated polymers are also introduced.

On-Surface Photochemistry of Pre-Ordered 1-Methyl-2-phenyl-acetylenes: C-H Bond Activation and Intermolecular Coupling on Highly Oriented Pyrolytic Graphite

In this contribution we report on light-induced metal-free coupling of propynylbenzene molecular units on highly oriented pyrolytic graphite. The reaction occurs within the self-assembled monolayer and leads to the generation of covalently coupled 1,5-hexadiyne and para-terphenyl derivatives under topological control. Such photochemical uncatalysed pathway represents an original approach in the field of topological C-C coupling at the solid/liquid interface and provides new insight into the low temperature formation of aromatic compounds at the surface of carbonaceous supports.

Controlling a Chemical Coupling Reaction on a Surface: Tools and Strategies for On-Surface Synthesis

On-surface synthesis is appearing as an extremely promising research field aimed at creating new organic materials. A large number of chemical reactions have been successfully demonstrated to take place directly on surfaces through unusual reaction mechanisms. In some cases the reaction conditions can be properly tuned to steer the formation of the reaction products. It is thus possible to control the initiation step of the reaction and its degree of advancement (the kinetics, the reaction yield); the nature of the reaction products (selectivity control, particularly in the case of competing processes); as well as the structure, position, and orientation of the covalent compounds, or the quality of the as-formed networks in terms of order and extension. The aim of our review is thus to provide an extensive description of all tools and strategies reported to date and to put them into perspective. We specifically define the different approaches available and group them into a few general categories. In the last part, we demonstrate the effective maturation of the on-surface synthesis field by reporting systems that are getting closer to application-relevant levels thanks to the use of advanced control strategies.

Mechanism of Chain Polymerization in Self-Assembled Monolayers of Diacetylene on the Graphite Surface

We have studied the mechanism of photoinduced chain polymerization in the self-assembled monolayer of a diacetylene compound, 10,12-pentacosadiyn-1-ol, on the graphite surface. We statistically analyze the polymerization degree of the polydiacetylene chains formed at different temperatures using scanning tunneling microscopy. The distributions of the polymerization degree agree well with the prediction from a simple probabilistic model, allowing for addition reaction and deactivation at both the ends of the chain as stochastic events. The estimated activation energies of the addition reaction and deactivation are noticeably different from those of the conventional solid-state polymerization in the bulk crystals of diacetylene.

Sequentially bridged graphene sheets with high strength, toughness, and electrical conductivity

There is a continuing search for manufacturable sheets having high strength and toughness in all sheet directions for diverse applications, from airplanes to windmills. Cross-plied carbon fibers in a polymer resin requiring high-temperature cure presently provide the common solution. We demonstrate cross-linked graphene sheets that are manufacturable from graphene platelets, which are resin-free, processable at low temperature, contain less than 10 wt % additives, and provide high strength and record toughness in all in-plane directions. This advance results from successive use of π–π and covalent cross-linking agents. Simultaneous enhancement of strength, durability, and electrical conductivity are demonstrated. Spectroscopic measurements, including Raman studies of interplatelet stress transfer, elucidate the chemical nature and physical consequences of these dual cross-linking agents.

We here show that infiltrated bridging agents can convert inexpensively fabricated graphene platelet sheets into high-performance materials, thereby avoiding the need for a polymer matrix. Two types of bridging agents were investigated for interconnecting graphene sheets, which attach to sheets by either π–π bonding or covalent bonding. When applied alone, the π–π bonding agent is most effective. However, successive application of the optimized ratio of π–π bonding and covalent bonding agents provides graphene sheets with the highest strength, toughness, fatigue resistance, electrical conductivity, electromagnetic interference shielding efficiency, and resistance to ultrasonic dissolution. Raman spectroscopy measurements of stress transfer to graphene platelets allow us to decipher the mechanisms of property improvement. In addition, the degree of orientation of graphene platelets increases with increasing effectiveness of the bonding agents, and the interlayer spacing increases. Compared with other materials that are strong in all directions within a sheet, the realized tensile strength (945 MPa) of the resin-free graphene platelet sheets was higher than for carbon nanotube or graphene platelet composites, and comparable to that of commercially available carbon fiber composites. The toughness of these composites, containing the combination of π–π bonding and covalent bonding, was much higher than for these other materials having high strengths for all in-plane directions, thereby opening the path to materials design of layered nanocomposites using multiple types of quantitatively engineered chemical bonds between nanoscale building blocks.

Self-Sensitization and Photo-Polymerization of Diacetylene Molecules Self-Assembled on a Hexagonal-Boron Nitride Nanosheet

Long poly-diacetylene chains are excellent candidates for planar, on-surface synthesized molecular electronic wires. Since hexagonal-Boron Nitride (h-BN) was identified as the best available atomically flat insulator for the deposition of poly-diacetylene precursors, we demonstrate the polymerization patterns and rate on it under UV-light irradiation, with subsequent polymer identification by atomic force microscopy. The results on h-BN indicate self-sensitization which yields blocks comprised of several polymers, unlike on the well-studied graphite/diacetylene system, where the polymers are always isolated. In addition, the photo-polymerization proceeds at least 170 times faster on h-BN, where it also results in longer polymers. Both effects are explained by the h-BN bandgap, which is larger than the diacetylene electronic excitation energy, thus allowing the transfer of excess energy absorbed by polymerized wires to adjacent monomers, triggering their polymerization. This work sets the stage for conductance measurements of single molecular poly-diacetylene wires on h-BN.

Diacetylene polymerization on a bulk insulator surface

Molecular electronics has great potential to surpass known limitations in conventional silicon-based technologies. The development of molecular electronics devices requires reliable strategies for connecting functional molecules by wire-like structures. To this end, diacetylene polymerization has been discussed as a very promising approach for contacting single molecules with a conductive polymer chain. A major challenge for future device fabrication is transferring this method to bulk insulator surfaces, which are mandatory to decouple the electronic structure of the functional molecules from the support surface. Here, we provide experimental evidence for diacetylene polymerization of 3,3'-(1,3-butadiyne-1,4-diyl)bisbenzoic acid precursors on the (10.4) surface of calcite, a bulk insulator with a band gap of around 6 eV. When deposited on the surface held at room temperature, ordered islands with a (1 × 3) superstructure are observed using dynamic atomic force microscopy. A distinct change is revealed upon heating the substrate to 485 K. After heating, molecular stripes with a characteristic inner structure are formed that excellently match the expected diacetylene polymer chains in appearance and repeat distance. The corresponding density functional theory computations reveal molecular-level bonding patterns of both the (1 × 3) superstructure and the formed striped structure, confirming the assignment of on-surface diacetylene polymerization. Transferring the concept of using diacetylene polymerization for creating conductive connections to bulk insulator surfaces paves the way towards application-relevant systems for future molecular electronic devices.

Self-assembling diacetylene molecules on atomically flat insulators

Single crystal sapphire and diamond surfaces are used as planar, atomically flat insulating surfaces, for the deposition of the diacetylene compound 10,12-nonacosadiynoic acid. The surface assembly is compared with results on hexagonal boron nitride (h-BN), highly oriented pyrolytic graphite (HOPG) and MoS₂ surfaces. A perfectly flat-lying monolayer of 10,12-nonacosadiynoic acid self-assembles on h-BN like on HOPG and MoS₂. On sapphire and oxidized diamond surfaces, we observed assemblies of standing-up molecular layers. Surface assembly is driven by surface electrostatic dipoles. Surface polarity is partially controlled using a hydrogenated diamond surface or totally screened by the deposition of a graphene layer on the sapphire surface. This results in a perfectly flat and organized SAM on graphene, which is ready for on-surface polymerization of long and isolated molecular wires under ambient conditions.

2D Supramolecular networks of dibenzonitrilediacetylene on Ag(111) stabilized by intermolecular hydrogen bonding

The two-dimensional (2D) surface-directed self-assembly of dibenzonitrile diacetylene (DBDA) on Ag(111) under ultrahigh vacuum (UHV) conditions was investigated by combining scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and theoretical simulations based on density functional theory (DFT) calculations. The molecule consists of two benzonitrile groups (-C₆H₄-C[triple bond, length as m-dash]N) on each side of a diacetylene (-C[triple bond, length as m-dash]C-C[triple bond, length as m-dash]C-) backbone. The terminating nitrile (-C[triple bond, length as m-dash]N) groups at the meta position of the phenyl rings lead to cis and trans stereoisomers. The trans isomer is prochiral and can adsorb in the R or S configuration, leading to the formation of enantiomeric self-assembled networks on the surface. We identify two simultaneously present supramolecular networks, termed parallel and chevron phases, as well as a less frequently observed butterfly phase. These networks are formed from pure R (or S) domains, racemic mixtures (RS), and cis isomers, respectively. Our complementary data illustrates that the formation of the 2D supramolecular networks is driven by intermolecular hydrogen bonding between nitrile and phenyl groups (-C[triple bond, length as m-dash]NH-C₆H₃). This study illustrates that the molecular arrangement of each network depends on the geometry of the isomers. The orientation of the nitrile group controls the formation of the most energetically stable network via intermolecular hydrogen bonding.

Photochemical Reactions in Self-Assembled Organic Monolayers Characterized by using Scanning Tunneling Microscopy

Research on the supramolecular self-assembly behavior at interfaces is of great importance to improving the performance of nanodevices that are based on optical functional materials. In this Minireview, several photoinduced isomerization and polymerization reactions in self-assembled organic monolayers on surfaces are discussed. Typical organic molecules contain azobenzene, alkynyl, or olefins groups. The feature surface base is a highly oriented pyrolytic graphite (HOPG) surface or a gold surface. Scanning tunneling microscopy (STM) is used as a strong tool to characterize new species' structures before and after illumination.

Diacetylene mixed Langmuir monolayers for interfacial polymerization

Polydiacetylene (PDA) and its derivatives are promising materials for applications in a vast number of fields, from organic electronics to biosensing. PDA is obtained through polymerization of diacetylene (DA) monomers, typically using UV irradiation. DA polymerization is a 1-4 addition reaction with both initiation and growth steps with topochemical control, leading to the "blue" polymer form as primary reaction product in bulk and at interfaces. Herein, the diacetylene monomer 10,12-pentacosadiynoic acid (DA) and the amphiphilic cationic N,N'-dioctadecylthiapentacarbocyanine (OTCC) have been used to build a mixed Langmuir monolayer. The presence of OTCC imposes a monolayer supramolecular structure instead of the typical trilayer of pure DA. Surface pressure, Brewster angle microscopy, and UV-vis reflection spectroscopy measurements, as well as computer simulations, have been used to assess in detail the supramolecular structure of the DA:OTCC Langmuir monolayer. Our experimental results indicate that the DA and OTCC molecules are sequentially arranged, with the two OTCC alkyl chains acting as spacing diacetylene units. Despite this configuration is expected to prevent photopolymerization of DA, the polymerization takes place without phase segregation, thus exclusively leading to the red polydiacetylene form. We propose a simple model for the initial formation of the "blue" or "red" PDA forms as a function of the relative orientation of the DA units. The structural insights and the proposed model concerning the supramolecular structure of the "blue" and "red" forms of the PDA are aimed at the understanding of the relation between the molecular and macroscopical features of PDAs.

Formation of C═C bond via knoevenagel reaction between aromatic aldehyde and barbituric acid at liquid/HOPG and vapor/HOPG interfaces

Controlling chemical reactions on surface is of great importance to constructing self-assembled covalent nanostructures. Herein, Knoevenagel reaction between aromatic aldehyde compound 2,5-di(5-aldehyde-2-thienyl)-1,4-dioctyloxybenzene (PT2) and barbituric acid (BA) has been successfully performed for the first time at liquid/HOPG interface and vapor/HOPG interface. The resulting surface nanostructures and the formation of C═C bond are recorded through scanning tunneling microscopy (STM), and confirmed by attenuated total reflectance Fourier-transform infrared (ATR/FT-IR) spectrometer and UV-vis absorption. The obtained results reveal that Knoevenagel condensation reaction can efficiently occur at both interfaces. This surface reaction would be an important step toward further reaction to produce innovative conjugated nanomaterial on the surface.