Generation of geometrically ordered lipid-based liquid-crystalline nanoparticles using biologically relevant enzymatic processing

Compartmentalised enzyme-induced phase transformations in self-assembling lipid systems

HYPOTHESIS

Understanding the digestion of lipid-based pharmaceutical formulations and food systems is necessary for optimising drug and nutrient delivery and has been extensively studied in bulk emulsion systems using the pH-stat method [1]. However, this approach is not suitable for investigation of individual lipid droplets, in particular the interface where the lipase acts. Microfluidic approaches to study digestion at lipid-water interfaces using droplet trapping have been proposed, however the aqueous phase in that case washes over the interface presenting uncertainty over the stoichiometry of interactions [2]. The internal interface of a Janus-like droplet, containing distinct aqueous and lipid compartments, mimics the interface of a lipid droplet in aqueous solution with controlled stoichiometry [3]. Hence, it was hypothesised that the internal interface of Janus droplets can offer a precise way to study the enzymatic digestion of lipids formulations.

EXPERIMENTS

Using microfluidic methods, Janus-like droplets were formed by coalescing emulsion droplets containing lipid formulation and pancreatic lipase. Polarised light microscopy (PLM) and in-situ small-angle X-ray scattering (SAXS) were used to investigate the droplets.

FINDINGS

PLM revealed the growth of an aligned inverse hexagonal phase (H2), and with SAXS showed that this phase transformation and alignment resulted from enzymatic digestion. A subsequent partial transformation from H2 to inverse bicontinuous cubic phase occurred when simulated intestinal fluid was used instead of Tris buffer. Suggesting that phospholipids and bile salts could diffuse across the internal interface to locally affect their surroundings.

A novel droplet-based approach to study phase transformations in lyotropic liquid crystalline systems

HYPOTHESIS

Lyotropic liquid crystals (LLC) and their phase transformations in response to stimuli have gathered much interest for controlled and 'on-demand' drug applications. Bulk methods of preparation impose limitations on studying the transformations, especially induced by compositional changes, such as enzymatic changes to lipid structure. Here we hypothesise that controlled microfluidic production and coalescence of dissimilar aqueous and lipid droplets emulsified in a third mutually immiscible liquid will provide a new approach to the spatio-temporal study of structure formation in lyotropic liquid crystalline materials.

EXPERIMENTS

Separate lipid and aqueous droplets, dispersed in a fluorocarbon oil were generated using a microfluidic format. The chip, prepared as a hybrid polydimethylsiloxane (PDMS) and glass microfluidic device, was constructed to enable in-situ acquisition of time-resolved synchrotron small angle X-ray scattering (SAXS) and crossed polarised light microscopy of the coalesced droplets to determine the structures present during aging.

FINDINGS

Janus-like droplets formed upon coalesce, with distinct lipid and aqueous portions with a gradient between the two sides of the merged droplet. SAXS and polarised light microscopy revealed a progression of mesophases as the lipid portion was hydrated by the aqueous portion via the diffusion limited interface which separated the portions. Thus demonstrating, on a droplet scale, a new approach for studying the phase transformation kinetics and identification of non-equilibrium phase in droplet-based lyotropic liquid systems.

Recent advances in versatile inverse lyotropic liquid crystals

Owing to the rapid and significant progress in advanced materials and life sciences, nanotechnology is increasingly gaining in popularity. Among numerous bio-mimicking carriers, inverse lyotropic liquid crystals are known for their unique properties. These carriers make accommodation of molecules with varied characteristics achievable due to their complicated topologies. Besides, versatile symmetries of inverse LCNPs (lyotropic crystalline nanoparticles) and their aggregating bulk phases allow them to be applied in a wide range of fields including drug delivery, food, cosmetics, material sciences etc. In this review, in-depth summary, discussion and outlook for inverse lyotropic liquid crystals are provided.

Reduction of enzymatic degradation of insulin via encapsulation in a lipidic bicontinuous cubic phase

Oral delivery of the protein drug insulin is not currently possible due to rapid degradation of the secondary structure in low pH conditions in the stomach and under the influence of digestive enzymes in the gastrointestinal tract. Effective oral delivery of insulin and other protein- or peptide-based drugs will, therefore, require encapsulation in a material or nanoparticle. Herein we investigate the ability of the lipid bicontinuous cubic phase formed by two lipids, monoolein (MO) and phytantriol (PT), to protect encapsulated insulin from degradation by the enzyme chymotrypsin, typically found in the small intestine. High encapsulation efficiency (>80%) was achieved in both lipid cubic phases with retention of the underlying cubic nanostructure. Release of insulin from the cubic matrix was shown to be diffusion-controlled; the release rate was dependent on the cubic nanostructure and consistent with measured diffusion coefficients for encapsulated insulin. Encapsulation was shown to significantly retard enzymatic degradation relative to that in water, with the protective effect lasting up to 2 h, exemplifying the potential of these materials to protect the encapsulated protein payload during oral delivery.

Formation of Self-Assembled Mesophases During Lipid Digestion

Lipids play an important role in regulating bodily functions and providing a source of energy. Lipids enter the body primarily in the form of triglycerides in our diet. The gastrointestinal digestion of certain types of lipids has been shown to promote the self-assembly of lipid digestion products into highly ordered colloidal structures. The formation of these ordered colloidal structures, which often possess well-recognized liquid crystalline morphologies (or “mesophases”), is currently understood to impact the way nutrients are transported in the gut and absorbed. The formation of these liquid crystalline structures has also been of interest within the field of drug delivery, as it enables the encapsulation or solubilization of poorly water-soluble drugs in the aqueous environment of the gut enabling a means of absorption. This review summarizes the evidence for structure formation during the digestion of different lipid systems associated with foods, the techniques used to characterize them and provides areas of focus for advancing our understanding of this emerging field.

Enzymatic hydrolysis of monoacylglycerols and their cyclopropanated derivatives: Molecular structure and nanostructure determine the rate of digestion

Colloidal lipidic particles with different space groups and geometries (mesosomes) are employed in the development of new nanosystems for the oral delivery of drugs and nutrients. Understanding of the enzymatic digestion rate of these particles is key to the development of novel formulations. In this work, the molecular structure of the lipids has been systematically tuned to examine the effect on their self-assembly and digestion rate. The kinetic and phase changes during the lipase-catalysed hydrolysis of mesosomes formed by four synthetic cyclopropanated lipids and their cis-unsaturated analogues were monitored by dynamic small angle X-ray scattering and acid/base titration. It was established that both the phase behaviour and kinetics of the hydrolysis are greatly affected by small changes in the molecular structure of the lipid as well as by the internal nanostructure of the colloidal particles.

Plasmalogen-Based Liquid Crystalline Multiphase Structures Involving Docosapentaenoyl Derivatives Inspired by Biological Cubic Membranes

Structural properties of plasmenyl-glycerophospholipids (plasmalogens) have been scarcely studied for plasmalogens with long polyunsaturated fatty acid (PUFA) chains, despite of their significance for the organization and functions of the cellular membranes. Elaboration of supramolecular assemblies involving PUFA-chain plasmalogens in nanostructured mixtures with lyotropic lipids may accelerate the development of nanomedicines for certain severe pathologies (e.g., peroxisomal disorders, cardiometabolic impairments, and neurodegenerative Alzheimer's and Parkinson's diseases). Here, we investigate the spontaneous self-assembly of bioinspired, custom-produced docosapentaenoyl (DPA) plasmenyl (ether) and ester phospholipids in aqueous environment (pH 7) by synchrotron small-angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (cryo-TEM). A coexistence of a liquid crystalline primitive cubic Im3m phase and an inverted hexagonal (H_II) phase is observed for the DPA-ethanolamine plasmalogen (C16:1p-22:5n6 PE) derivative. A double-diamond cubic Pn3m phase is formed in mixed assemblies of the phosphoethanolamine plasmalogen (C16:1p-22:5n6 PE) and monoolein (MO), whereas a coexistence of cubic and lamellar liquid crystalline phases is established for the DPA-plasmenyl phosphocholine (C16:1p-22:5n6 PC)/MO mixture at ambient temperature. The DPA-diacyl phosphoinositol (22:5n6-22:5n6 PI) ester lipid displays a propensity for a lamellar phase formation. Double membrane vesicles and multilamellar onion topologies with inhomogeneous distribution of interfacial curvature are formed upon incorporation of the phosphoethanolamine plasmalogen (C16:1p-22:5n6 PE) into dioleoylphosphocholine (DOPC) bilayers. Nanoparticulate formulations of plasmalogen-loaded cubosomes, hexosomes, and various multiphase cubosome- and hexosome-derived architectures and mixed type nano-objects (e.g., oil droplet-embedding vesicles or core-shell particles with soft corona) are produced with PUFA-chain phospholipids and lipophilic antioxidant-containing membrane compositions that are characterized by synchrotron SAXS and cryo-TEM imaging. The obtained multiphase nanostructures reflect the changes in the membrane curvature induced by the inclusion of DPA-based PE and PC plasmalogens, as well as DPA-PI ester derivative, and open new opportunities for exploration of these bioinspired nanoassemblies.

Vancomycin Loaded Glycerol Monooleate Liquid Crystalline Phases Modified with Surfactants

The influence of two tuning agents, polyglycerol ester (PE) and triblock copolymer (TC), on the properties of glycerol monooleate (MO) liquid crystalline phase (LCP) was investigated to achieve the therapeutic concentration of vancomycin hydrochloride (VHCl) into the eye, topically during 60 min (1 h) and intravitreally during 2880 min (48 h). Different techniques were used to elucidate the impact of surfactants on the structure of the LCP: polarized light microscopy (PLM), small-angle X-ray scattering (SAXS), and in vitro release tests I and II (simulating local and intravitreal application in the eye). The structure analysis by SAXS depicts that the inclusion of PE into the MO LCP provided partial transition of a hexagonal phase into a lamellar phase, and TC induced a partial transition of a hexagonal phase into an LCP which identification was difficult. The LCP modulated with PE and TC demonstrated different VHCl's release patterns and were evaluated by comparing our release data with the literature data. The comparison indicated that the LCP modulated with 30% w/w PE could be a promising VHCl delivery system intravitreally during 2880 min.

Comparison of bulk and microfluidic methods to monitor the phase behaviour of nanoparticles during digestion of lipid-based drug formulations using in situ X-ray scattering

The performance of orally administered lipid-based drug formulations is crucially dependent on digestion, and understanding the colloidal structures formed during digestion is necessary for rational formulation design. Previous studies using the established bulk pH-stat approach (Hong et al. 2015), coupled to synchrotron small angle X-ray scattering (SAXS), have begun to shed light on this subject. Such studies of digestion using in situ SAXS measurements are complex and have limitations regarding the resolution of intermediate structures. Using a microfluidic device, the digestion of lipid systems may be monitored with far better control over the mixing of the components and the application of enzyme, thereby elucidating a finer understanding of the structural progression of these lipid systems. This work compares a simple T-junction microcapillary device and a custom-built microfluidic chip featuring hydrodynamic flow focusing, with an equivalent experiment with the full scale pH-stat approach. Both microfluidic devices were found to be suitable for in situ SAXS measurements in tracking the kinetics with improved time and signal sensitivity compared to other microfluidic devices studying similar lipid-based systems, and producing more consistent and controllable structural transformations. Particle sizing of the nanoparticles produced in the microfluidic devices were more consistent than the pH-stat approach.

Structural Transformation in Vesicles upon Hydrolysis of Phosphatidylethanolamine and Phosphatidylcholine with Phospholipase C

This study provides insights into dynamic nanostructural changes in phospholipid systems during hydrolysis with phospholipase C, the fate of the hydrolysis products, and the kinetics of lipolysis. The effect of lipid restructuring of the vesicle was investigated using small-angle X-ray scattering and cryogenic scanning electron microscopy. The rate and extent of phospholipid hydrolysis were quantified using nuclear magnetic resonance. Hydrolysis of two phospholipids, phosphatidylethanolamine (PE) and phosphatidylcholine (PC), results in the cleavage of the molecular headgroup, causing two strikingly different changes in lipid self-assembly. The diacylglycerol product of PC escapes the lipid bilayer, whereas the diacylglycerol product adopts a different configuration within the lipid bilayer of the PE vesicles. These results are then discussed concerning the change of the lipid configuration upon the lipid membrane and its potential implications in vivo, which is of significant importance for the detailed understanding of the fate of lipidic particles and the rational design of enzyme-responsive lipid-based drug delivery systems.

Preparation of Nanostructured Lipid Drug Delivery Particles Using Microfluidic Mixing

BACKGROUND

Cubosomes are highly ordered self-assembled lipid particles analogous to liposomes, but with internal liquid crystalline structure. They are receiving interest as stimuli responsive delivery particles, but their preparation typically requires high energy approaches such as sonication which is not favourable in many applications.

OBJECTIVE

Here we investigated the impact of microfluidic preparation on particle size distribution and internal structure of cubosomes prepared from two different lipid systems, phytantriol and glyceryl monooleate (GMO).

METHODS

The impact of relative flow rates of the aqueous and organic streams, the total flow rate and temperature were investigated in a commercial microfluidic system. The particle size distribution and structure were measured using dynamic light scattering and small angle X-ray scattering respectively.

RESULTS

Phytantriol based particles were robust to different processing conditions, while cubosomes formed using GMO were more sensitive to composition both locally and globally, which reflects their preparation using other techniques.

CONCLUSION

Thus, in summary microfluidics represents a reproducible and versatile method to prepare complex lipid particle dispersions such as cubosomes.

Large Hexosomes from Emulsion Droplets: Particle Shape and Mesostructure Control

Soft, rotationally symmetric particles of dispersed hexagonal liquid crystalline phase are produced using a method previously developed for cubosome microparticle production. The technique forms hexosome particles via removal of ethanol from emulsion droplets containing monoolein, water, and one of the various hydrophobic molecules: vitamin E, hexadecane, oleic acid, cyclohexane, or divinylbenzene. The unique rotational symmetry of the particles is characterized by optical microscopy and small-angle X-ray scattering to link particle phase, shape, and structure to composition. Rheology of the soft particles can be varied independently of shape, enabling control of transport, deformation, and biological response by controlling composition and molecular structure of the additives. The direct observations of formation, and the resultant hexosome shapes, link the particle-scale and mesoscale properties of these novel self-assembled particles and broaden their applications. The micron-scale hexosomes provide a route to understanding the effects of particle size, crystallization rate, and rheology on the production of soft particles with liquid crystalline structure and unique shape and symmetry.

Phase behavior in the biologically important oleic acid/sodium oleate/water system

The phase behavior in the oleic acid/sodium oleate/normal saline (0.15M NaCl aqueous solution) system has been determined. For this purpose visual inspection of samples between crossed polarizers, and Small Angle X-ray diffraction was used to identify the various phases and their unit cell dimensions. A rich phase behavior was observed for the ternary system, featuring reverse micellar, micellar cubic, hexagonal, and cubic phases, and large regions with lamellar phases. As expected the ratio the 'oleic acid/sodium oleate' determines the pH and as a consequence the phase behavior. The results could be modeled by an extended Henderson-Hasselbalch (HH) equation, which takes into account the electrostatic potential at the aqueous lipid interface. The knowledge obtained is important for understanding the lipolysis of triglycerides, as the phase behavior of the end-product of the reaction regulates how well the insoluble product can be dispersed and consequently the kinetics of the process.

Soft polyhedral particles based on cubic liquid crystalline emulsion droplets

Soft polyhedral particles based on variations of the cubic symmetry group are produced from a precursor emulsion by extracting solvent to grow facets on the droplets. The droplets transform into liquid crystals with solid-like rheology and controlled size and shape. Small-angle X-ray scattering confirms a bicontinuous cubic liquid crystalline phase forms from aqueous glycerol monoolein and is responsible for the particle faceting observed. Different polyhedra are produced by varying face growth rates through control of precursor droplet size, system temperature, and solubilization and adsorption of guest molecules. More exotic faceted shapes can be formed by the soft particles by applying asymmetric solvent removal gradients and by deforming the precursor droplets into, for example, ellipsoids before crystallization. The method is a powerful means to produce soft polyhedra, using continuous microfluidic or other approaches, or to act as templates for hard polyhedral particle synthesis.

Dynamic formation of nanostructured particles from vesicles via invertase hydrolysis for on-demand delivery

Controlled hydrolysis via invertase action alters molecular shape and therefore lipid curvature, consequently triggering the release of encapsulated drug.

Mesoporous self-assembled nanoparticles of biotransesterified cyclodextrins and nonlamellar lipids as carriers of water-insoluble substances

Soft mesoporous hierarchically structured particles were created by the self-assembly of an amphiphilic deep cavitand cyclodextrin βCD-nC₁₀ (degree of substitution n = 7.3), with a nanocavity grafted by multiple alkyl (C₁₀) chains on the secondary face of the βCD macrocycle through enzymatic biotransesterification, and the nonlamellar lipid monoolein (MO). The effect of the non-ionic dispersing agent polysorbate 80 (P80) on the liquid crystalline organization of the nanocarriers and their stability was studied in the context of vesicle-to-cubosome transition. The coexistence of small vesicular and nanosponge membrane objects with bigger nanoparticles with inner multicompartment cubic lattice structures was established as a typical feature of the employed dispersion process. The cryogenic transmission electron microscopy (cryo-TEM) images and small-angle X-ray scattering (SAXS) structural analyses revealed the dependence of the internal organization of the self-assembled nanoparticles on the presence of embedded βCD-nC₁₀ deep cavitands in the lipid bilayers. The obtained results indicated that the incorporated amphiphilic βCD-nC₁₀ building blocks stabilize the cubic lattice packing in the lipid membrane particles, which displayed structural features beyond the traditional CD nanosponges. UV-Vis spectroscopy was employed to characterize the nanoencapsulation of a model hydrophobic dimethylphenylazo-naphthol guest compound (Oil red) in the created nanocarriers. In perspective, these dual porosity carriers should be suitable for co-encapsulation and sustained delivery of peptide, protein or siRNA biopharmaceuticals together with small molecular weight drug compounds or imaging agents.

Responsive self-assembled nanostructured lipid systems for drug delivery and diagnostics

While stimuli-responsive polymers have received a huge amount of attention in the literature, responsive lipid-based mesophase systems offer unique opportunities in biomedical applications such as drug delivery and biosensing. The different mesophase equilibrium structures enables dynamic switching between nanostructures to facilitate drug release or as a transducer for recognition events. In drug delivery, this behavior offers researchers the means to deliver a therapeutic payload at a specific rate and time i.e. 'on-demand'. This review summarizes the distinctive features of these multifaceted materials and aggregates the current state of the art research from our groups and others into the use of these materials as bulk gels and nanostructured dispersions for drug delivery, biosensing and diagnostics.

Amino Acid Induced Modification of Self-Assembled Monoglyceride-Based Nanostructures

Self-assembled phases based on monoglycerides are promising candidates for drug delivery systems. Alterations of these phases need to be performed by addition of substances which are biocompatible. Inverse bicontinuous cubic phases are altered by the addition of five amino acids, namely, glycine, phenylalanine, alanine, glutamine, and tryptophan. These natural molecules have a diversity of side chains which predicts their polarity and subsequently their interaction with the interfacial region. Whereas polar amino acids cause a slight shrinking of the fully hydrated phase, amino acids with a nonpolar side chain expand it. Tryptophan is also able to provoke a growth of inverse hexagonal, micellar cubic, and micellar structures. Amino acid concentrations in the aqueous phase, even above the amino acid's solubility, further affect all aforementioned structures and cause a significant enlargement of up to 26%. Besides the amino acids' impact on the structural sizes, they also affect the phase transition temperatures.

Non-lamellar lipid liquid crystalline structures at interfaces

The self-assembly of lipids leads to the formation of a rich variety of nano-structures, not only restricted to lipid bilayers, but also encompassing non-lamellar liquid crystalline structures, such as cubic, hexagonal, and sponge phases. These non-lamellar phases have been increasingly recognized as important for living systems, both in terms of providing compartmentalization and as regulators of biological activity. Consequently, they are of great interest for their potential as delivery systems in pharmaceutical, food and cosmetic applications. The compartmentalizing nature of these phases features mono- or bicontinuous networks of both hydrophilic and hydrophobic domains. To utilize these non-lamellar liquid crystalline structures in biomedical devices for analyses and drug delivery, it is crucial to understand how they interact with and respond to different types of interfaces. Such non-lamellar interfacial layers can be used to entrap functional biomolecules that respond to lipid curvature as well as the confinement. It is also important to understand the structural changes of deposited lipid in relation to the corresponding bulk dispersions. They can be controlled by changing the lipid composition or by introducing components that can alter the curvature or by deposition on nano-structured surface, e.g. vertical nano-wire arrays. Progress in the area of liquid crystalline lipid based nanoparticles opens up new possibilities for the preparation of well-defined surface films with well-defined nano-structures. This review will focus on recent progress in the formation of non-lamellar dispersions and their interfacial properties at the solid/liquid and biologically relevant interfaces.

Understanding the Mechanism of Enzyme-Induced Formation of Lyotropic Liquid Crystalline Nanoparticles

Liquid crystalline nanoparticles have shown great potential for application in fields of drug delivery and agriculture. However, optimized approaches to generating these dispersions have long been sought after. This study focused on understanding the mechanism of formation of cubosomes during the recently reported enzymatic approach and extending the approach to alternative lipid types other than phytantriol. The chain length of digestible lipids was found to influence the effectiveness of triglycerides in disrupting the equilibrium cubic phase structure to form the emulsion precursor. In general, a greater hydrophobicity of the triglyceride required a lower concentration to inhibit liquid crystal structure formation. Selachyl alcohol was also examined due to its nondigestible trait and ability to form the inverted hexagonal phase. Digestion of its precursor emulsion formed hexosomes analogous to the phytantriol-based systems. Finally, the assumption that fatty acids liberated during digestion needed to partition out of the nondigestible lipids for the re-formation of the phase structure was found to be untrue. Their ionization state, however, did have an effect on the resulting nanostructure, and this unique property could potentially provide a useful attribute for oral drug delivery systems.

Solution self-assembly of block copolymers containing a branched hydrophilic block into inverse bicontinuous cubic mesophases

Solution self-assembly of amphiphilic block copolymers into inverse bicontinuous cubic mesophases is an emerging strategy for directly creating highly ordered triply periodic porous polymer nanostructures with large pore networks and desired surface functionalities. Although there have been recent reports on the formation of highly ordered triply periodic minimal surfaces of self-assembled block copolymer bilayers, the structural requirements for block copolymers in order to facilitate the preferential formation of such inverse mesophases in solution have not been fully investigated. In this study, we synthesized a series of model block copolymers, namely, branched poly(ethylene glycol)-block-polystyrene (bPEG-PS), to investigate the effect of the architecture of the block copolymers on their solution self-assembly into inverse mesophases consisting of the block copolymer bilayer. On the basis of the results, we suggest that the branched architecture of the hydrophilic block is a crucial structural requirement for the preferential self-assembly of the resulting block copolymers into inverse bicontinuous cubic phases. The internal crystalline lattice of the inverse bicontinuous cubic structure can be controlled via coassembly of branched and linear block copolymers. The results presented here provide design criteria for amphiphilic block copolymers to allow the formation of inverse bicontinuous cubic mesophases in solution. This may contribute to the direct synthesis of well-defined porous polymers with desired crystalline order in the porous networks and surface functionalities.

Facile dispersion and control of internal structure in lyotropic liquid crystalline particles by auxiliary solvent evaporation

Submicron sized, structured lyotropic liquid crystalline (LLC) particles, so-called hexosomes and cubosomes, are generally obtained by high energy input dispersion methods, notably ultrasonication and high-pressure emulsification. We present a method to obtain dispersions of such LLC particles with a significantly reduced energy input, by evaporation of an auxiliary volatile solvent immiscible with water, e.g. cyclohexane or limonene. The inner structure of the particles can be precisely controlled by the addition of a nonvolatile oil, such as α-tocopherol or tetradecane consistently with bulk phase diagrams,. Two different lyotropic surfactants were employed, industrial grade monolinoleine (MLO) and soy bean phosphatidylcholine (PC). The lyotropic surfactant and oil phase modifier were first dissolved in the volatile solvent to give a liquid reverse micellar (L2) phase, which requires significantly less energy input to be dispersed in an aqueous solution of secondary emulsifier compared to the corresponding gel-like bulk mesophase. The auxiliary volatile solvent was then removed from the emulsion by evaporation at room temperature, yielding LLC particles of the desired inner structure, Pn3̅m, H2, or Fd3̅m. The obtained particles were characterized by small-angle X-ray scattering (SAXS), dynamic light scattering (DLS), and cryogenic transmission electron microscopy (cryo-TEM). Our method enables fine-tuning of the final particle size through the volatile-to-nonvolatile volume ratio and processing conditions.