Photophysical study of a self-assembled donor-acceptor two-layer film on TiO2

Advanced Nonvolatile Organic Optical Memory Using Self-Assembled Monolayers of Porphyrin-Fullerene Dyads

Photo-switchable organic field-effect transistors (OFETs) represent an important platform for designing memory devices for a diverse array of products including security (brand-protection, copy-protection, keyless entry, etc.), credit cards, tickets, and multiple wearable organic electronics applications. Herein, we present a new concept by introducing self-assembled monolayers of donor-acceptor porphyrin-fullerene dyads as light-responsive triggers modulating the electrical characteristics of OFETs and thus pave the way to the development of advanced nonvolatile optical memory. The devices demonstrated wide memory windows, high programming speeds, and long retention times. Furthermore, we show a remarkable effect of the orientation of the fullerene-polymer dyads at the dielectric/semiconductor interface on the device behavior. In particular, the dyads anchored to the dielectric by the porphyrin part induced a reversible photoelectrical switching of OFETs, which is characteristic of flash memory elements. On the contrary, the devices utilizing the dyad anchored by the fullerene moiety demonstrated irreversible switching, thus operating as read-only memory (ROM). A mechanism explaining this behavior is proposed using theoretical DFT calculations. The results suggest the possibility of revisiting hundreds of known donor-acceptor dyads designed previously for artificial photosynthesis or other purposes as versatile optical triggers in advanced OFET-based multibit memory devices for emerging electronic applications.

Fullerene binding effects in Al(III)/Zn(II) Porphyrin/Phthalocyanine photophysical properties and charge transport

We evaluate the fullerene C₆₀ binding effect; through the metal (Al) and through the ligand (Pc,TPP), on the photophysical and charge transport properties of M-porphyrin(TPP)/phthalocyanine(Pc) (M = Al(III), Zn(II)). We perform density functional theory (DFT) and time-dependent DFT calculations for the macrocycle-C₆₀ dyads, showing that all systems studied are thermodynamically favorable. The C₆₀ binding effect on the absorption spectrum is a red-shift of the Q and Soret (B) bands of TPPs and Pcs. The Pc-dyads show longer λ for Q bands (673 nm) than those with TPP (568 nm). AlTPP-C₆₀ and ZnTPP-C₆₀ show a more favorable electron injection to TiO₂ than the analogs Pcs, and the regeneration of the dye is preferred in AlTPP-C₆₀ and AlPc-C₆₀. Zero-bias conductance is computed (10^-4-10^-7 G₀) for the dyads using molecular junctions with Au(111)-based electrodes. When a bias voltage of around 0.6 V up to 1 V is applied, an increase in current is obtained for AlTPP-C₆₀ (10^-7 A), ZnTPP-C₆₀ (10^-7 A), and AlPc-C₆₀ (10^-8 A). Although there is not a unique trend in the behavior of the dyads, Pcs have better photophysical properties than TPPs and the latter are better in the charge transport. We conclude that AlTPP(ZnTPP)-C₆₀ dyads are an excellent alternative for designing new materials for dye-sensitized solar cells or optoelectronic devices.

Monitoring Charge Carrier Diffusion across a Perovskite Film with Transient Absorption Spectroscopy

We have developed a new noninvasive optical method for monitoring charge carrier diffusion and mobility in semiconductor thin films in the direction perpendicular to the surface which is most relevant for devices. The method is based on standard transient absorption measurements carried out in reflectance and transmittance modes at wavelengths below the band gap where the transient response is mainly determined by the change in refractive index, which in turn depends on the distribution of photogenerated carriers across the film. This distribution is initially inhomogeneous because of absorption at the excitation wavelength and becomes uniform over time via diffusion. By modeling these phenomena we can determine the diffusion constant and respective mobility. Applying the method to a 500 nm thick triple cation FAMACs perovskite film revealed that homogeneous carrier distribution is established in few hundred picoseconds, which is consistent with mobility of 66 cm² (V s)^-1.

Charge transfer dynamics in CsPbBr3 perovskite quantum dots-anthraquinone/fullerene (C60) hybrids

An advantage of colloidal quantum dots, particularly perovskite quantum dots (PQDs), as photoactive components is that they easily form complexes with functional organic molecules, which results in hybrids with enriched photophysical properties. Herein, we demonstrate the formation of stable ground state complexes of CsPbBr3 PQD with two widely used molecular electron acceptors, fullerene (C60) and anthraquinone, (AQ) which contain carboxylic anchor groups. Dynamics of the photo-induced electron transfer in the hybrids were compared. The use of carboxylic groups for binding results in stable complex formation and their photophysical properties depend on the ratio of components but not the absolute concentrations (up to micromolar concentrations). Time-resolved transient absorption (TA) spectroscopy shows that in both cases, a charge separated (CS) state is formed. Data analysis was aimed to evaluate the CS time constant in ideal one-to-one complexes and was found to be in the range of 30-190 ps. The CS state of PQD-AQ complexes recombines directly to the ground state in roughly one microsecond. Recombination of the CS state of PQD-C60 is more complex and points to strong inhomogeneity of these complexes. Majority of the CS states relax by first forming the C60 triplet state.

Refractive index change dominates the transient absorption response of metal halide perovskite thin films in the near infrared

Perovskite films have an uncommon, previously unreported transient absorption response in the NIR, which is caused by a change in the refractive index.

Comparison of electron injection and recombination on TiO2 nanoparticles and ZnO nanorods photosensitized by phthalocyanine

Titanium dioxide (TiO₂) and zinc oxide (ZnO) semiconductors have similar band gap positions but TiO₂ performs better as an anode material in dye-sensitized solar cell applications. We compared two electrodes made of TiO₂ nanoparticles and ZnO nanorods sensitized by an aggregation-protected phthalocyanine derivative using ultrafast transient absorption spectroscopy. In agreement with previous studies, the primary electron injection is two times faster on TiO₂, but contrary to the previous results the charge recombination is slower on ZnO. The latter could be due to morphology differences and the ability of the injected electrons to travel much further from the sensitizer cation in ZnO nanorods.

Effect of Co-Adsorbate and Hole Transporting Layer on the Photoinduced Charge Separation at the TiO2-Phthalocyanine Interface

Understanding the primary processes of charge separation (CS) in solid-state dye-sensitized solar cells (DSSCs) and, in particular, analysis of the efficiency losses during these primary photoreactions is essential for designing new and efficient photosensitizers. Phthalocyanines (Pcs) are potentially interesting sensitizers having absorption in the red side of the optical spectrum and known to be efficient electron donors. However, the efficiencies of Pc-sensitized DSSCs are lower than that of the best DSSCs, which is commonly attributed to the aggregation tendency of Pcs. In this study, we employ ultrafast spectroscopy to discover why and how much does the aggregation affect the efficiency. The samples were prepared on a standard fluorine-doped tin oxide (FTO) substrates covered by a porous layer of TiO₂ nanoparticles, functionalized by a Pc sensitizer and filled by a hole transporting material (Spiro-MeOTAD). The study demonstrates that the aggregation can be suppressed gradually by using co-adsorbates, such as chenodeoxycholic acid (CDCA) and oleic acid, but rather high concentrations of co-adsorbate is required. Gradually, a few times improvement of quantum efficiency was observed at sensitizer/co-adsorbate ratio Pc/CDCA = 1:10 and higher. The time-resolved spectroscopy studies were complemented by standard photocurrent measurements of the same sample structures, which also confirmed gradual increase in photon-to-current conversion efficiency on mixing Pc with CDCA.

Multimolecular assemblies on high surface area metal oxides and their role in interfacial energy and electron transfer

High surface area metal oxides offer a unique substrate for the assembly of multiple molecular components at an interface.

Formation and stability of porphyrin and phthalocyanine self-assembled monolayers on ZnO surfaces

Formation of self-assembled monolayers (SAMs) of three porphyrin and one phthalocyanine derivatives on thin ZnO film was studied by monitoring absorption spectra of the samples. The compounds were equipped with carboxylic or phosphate groups to bind to the surface. The SAM formation was found to be fast. The layer was formed in less than 15 min for all studied porphyrins, and 30 min was sufficient to form phthalocyanine layer. For porphyrins with different anchor groups the SAM formation was too fast to see any difference between the anchoring groups. The stability of SAMs was tested then by immersing the samples into neat solvents. Upon immersion the SAMs were gradually losing the absorbance for all the compounds with degradation trends being in line with p[Formula: see text] values of the binding groups of the same type. However, even for the weakest binding group the SAM was relatively stable after a few tens of minutes of washing, which was sufficient to remove physisorbed compounds but the SAM was essentially not destroyed. Comparison of SAMs on thin films with SAMs on ZnO nanorods and TiO2 nanoparticle films indicated the same fast layer formation but relatively weaker SAMs stability, showing 20–40% faster absorption losses during the washing.

Color Bricks: Building Highly Organized and Strongly Absorbing Multicomponent Arrays of Terpyridyl Perylenes on Metal Oxide Surfaces

Terpyridine-substituted perylenes containing cyclic anhydrides in the peri position were synthesized. The anhydride group served as an anchor for assembly of the terpyridyl-crowned chromophores as monomolecular layers on metal oxide surfaces. Further coordination with Zn(2+) ions allowed for layer-by-layer formation of supramolecular assemblies of perylene imides on the solid substrates. With properly selected anchor and linker molecules it was possible to build high quality structures of greater than ten successive layers by a simple and straightforward procedure. The prepared films were stable and had a broad spectral coverage and high absorbance. To demonstrate their potential use, the synthesized dyes were employed in solid-state dye-sensitized solar cells, and electron injection from the perylene antennas to titanium dioxide was observed.