Kinetics and cluster morphology evolution of shear-driven aggregation of well-stabilized colloids

Generation of Polymer Nanocomposites through Shear-Driven Aggregation of Binary Colloids

Design of polymer nanocomposites has been an intense research topic in recent decades because hybrid nanomaterials are widely used in many fields. Throughout their development, there has often been a challenging issue how one can uniformly distribute nanoparticles (NPs) in a polymer matrix, avoiding their agglomeration. In this short review, we first introduce the theory of colloidal aggregation/gelation purely based on intense shear forces. Then, we illustrate a methodology for preparing polymer nanocomposites where the NPs (as fillers) are uniformly and randomly distributed inside a matrix of polymer NPs, based on intense shear-driven aggregation of binary colloids, without using any additives. Its feasibility has been demonstrated using two stable binary colloids composed of (1) poly-methyl methacrylate fillers and polystyrene NPs, and (2) graphene oxide sheets (fillers) and poly-vinylidene fluoride NPs. The mechanism leading to capturing and distribution of the fillers inside the polymer NP matrix has been illustrated, and the advantages of the proposed methodology compared with the other common methods are also discussed.

Colloidal Instability Fosters Agglomeration of Subvisible Particles Created by Rupture of Gels of a Monoclonal Antibody Formed at Silicone Oil-Water Interfaces

In this study, we investigated the effect of ionic strength (1.25-231 mM) on viscoelastic interfacial gels formed by a monoclonal antibody at silicone oil-water interfaces, and the formation of subvisible particles due to rupture of these gels. Rates of gel formation and their elastic moduli did not vary significantly with ionic strength. Likewise, during gel rupture no significant effects of ionic strength were observed on particle formation and aggregation as detected by microflow imaging, resonance mass measurement, and size exclusion chromatography. Subvisible particles formed by mechanical rupturing of the gels agglomerated over time, even during quiescent incubation, due to the colloidal instability of the particles.

Uniform distribution of graphene oxide sheets into a poly-vinylidene fluoride nanoparticle matrix through shear-driven aggregation

A general methodology has been developed for preparing nanocomposites with uniform, random distribution of fillers in polymer matrices, purely based on intense shear-driven aggregation, while avoiding filler aggregation. This procedure is demonstrated for a binary colloid composed of graphene oxide (GO) sheets and poly-vinylidene fluoride (PVDF) nanoparticles (NPs), both negatively charged and stable at rest. On the other hand, the PVDF NPs are shear-active (i.e. aggregation occurs under intensive shear), while the GO sheets are shear-inactive. It is found that when the two suspensions are mixed and the resulting binary colloid is forced to pass through a microchannel (MC) device (at a very high shear rate, G = 1.2 × 10(6) s(-1)), the shear-inactive GO sheets are captured and well distributed inside the PVDF NP clusters or gels. In addition, it is shown that in order to have 100% capture efficiency for the GO sheets, a minimum solid content of the binary colloid is required, which can be identified experimentally as the minimum leading to gelation after passing through the MC only one time.

Nanoparticle Clusters: Assembly and Control Over Internal Order, Current Capabilities, and Future Potential

The current state of the art in the use of colloidal methods to form nanoparticle assemblies, or clusters (NPCs) is reviewed. The focus is on the two-step approach, which exploits the advantages of bottom-up wet chemical NP synthesis procedures, with subsequent colloidal destabilization to trigger assembly in a controlled manner. Recent successes in the application of functional NPCs with enhanced emergent collective properties for a wide range of applications, including in biomedical detection, surface enhanced Raman scattering (SERS) enhancement, photocatalysis, and light harvesting, are highlighted. The role of the NP-NP interactions in the formation of monodisperse ordered clusters is described and the different assembly processes from a wide range of literature sources are classified according to the nature of the perturbation from the initial equilibrium state (dispersed NPs). Finally, the future for the field and the anticipated role of computational approaches in developing next-generation functional NPCs are briefly discussed.

Shear-driven aggregation of binary colloids for randomly distributing nanoparticles in a matrix

We propose a methodology for preparing composite materials where A nanoparticles (NPs) are uniformly and randomly distributed inside a matrix of B NPs. It is based on intense shear-driven aggregation of binary colloids composed of A and B NPs, without using any additives. Its feasibility has been demonstrated using stable binary colloids composed of poly-methyl methacrylate (PMMA) particles and polystyrene (PS) particles. The PS particles alone undergo shear-driven aggregation (shear-active), while the PMMA particles alone do not exhibit any aggregation under the same conditions (shear-inactive). It is found that the shear-driven aggregation of the binary colloids does occur, and the formed clusters are composed of both the "shear-active" PS and "shear-inactive" PMMA particles. The SEM pictures demonstrate that the PMMA particles are uniformly and randomly distributed among the PS particles in the clusters, thus confirming the feasibility of the proposed methodology. The mechanism leading to the aggregation of the binary colloids has been discussed based on the experimental observations.

Synthesis of Water-Based Dispersions of Polymer/TiO₂ Hybrid Nanospheres

We develop a strategy for preparing water-based dispersions of polymer/TiO₂ nanospheres that can be used to form composite materials applicable in various fields. The formed hybrid nanospheres are monodisperse and possess a hierarchical structure. It starts with the primary TiO₂ nanoparticles of about 5 nm, which first assemble to nanoclusters of about 30 nm and then are integrated into monomer droplets. After emulsion polymerization, one obtains the water-based dispersions of polymer/TiO₂ nanospheres. To achieve universal size, it is necessary to have treatments with intense turbulent shear generated in a microchannel device at different stages. In addition, a procedure combining synergistic actions of steric and anionic surfactants has been designed to warrant the colloidal stability of the process. Since the formed polymer/TiO₂ nanospheres are stable aqueous dispersions, they can be easily mixed with TiO₂-free polymeric nanoparticle dispersions to form new dispersions, where TiO₂-containing nanospheres are homogeneously distributed in the dispersions at the nanoscale, thus leading to various applications. As an example, the proposed strategy has been applied to generate polystyrene/TiO₂ nanospheres of about 100 nm in diameter.