Formation of wrinkled silica mesostructures based on the phase behavior of pseudoternary systems

Multifunctional Hierarchical Nanoplatform with Anisotropic Bimodal Mesopores for Effective Neural Circuit Reconstruction after Spinal Cord Injury

A persistent inflammatory response, intrinsic limitations in axonal regenerative capacity, and widespread presence of extrinsic axonal inhibitors impede the restoration of motor function after a spinal cord injury (SCI). A versatile treatment platform is urgently needed to address diverse clinical manifestations of SCI. Herein, we present a multifunctional nanoplatform with anisotropic bimodal mesopores for effective neural circuit reconstruction after SCI. The hierarchical nanoplatform features of a Janus structure consist of dual compartments of hydrophilic mesoporous silica (mSiO2) and hydrophobic periodic mesoporous organosilica (PMO), each possessing distinct pore sizes of 12 and 3 nm, respectively. Unlike traditional hierarchical mesoporous nanomaterials with dual-mesopores interlaced with each other, the two sets of mesopores in this Janus nanoplatform are spatially independent and possess completely distinct chemical properties. The Janus mesopores facilitate controllable codelivery of dual drugs with distinct properties: the hydrophilic macromolecular enoxaparin (ENO) and the hydrophobic small molecular paclitaxel (PTX). Anchoring with CeO2, the resulting mSiO2&PMO-CeO2-PTX&ENO nanoformulation not only effectively alleviates ROS-induced neuronal apoptosis but also enhances microtubule stability to promote intrinsic axonal regeneration and facilitates axonal extension by diminishing the inhibitory effect of extracellular chondroitin sulfate proteoglycans. We believe that this functional dual-mesoporous nanoplatform holds significant potential for combination therapy in treating severe multifaceted diseases.

Impact of Porous Silica Nanosphere Architectures on the Catalytic Performance of Supported Sulphonic Acid Sites for Fructose Dehydration to 5-Hydroxymethylfurfural

5-hydroxymethylfurfural represents a key chemical in the drive towards a sustainable circular economy within the chemical industry. The final step in 5-hydroxymethylfurfural production is the acid catalysed dehydration of fructose, for which supported organoacids are excellent potential catalyst candidates. Here we report a range of solid acid catalysis based on sulphonic acid grafted onto different porous silica nanosphere architectures, as confirmed by TEM, N2 porosimetry, XPS and ATR-IR. All four catalysts display enhanced active site normalised activity and productivity, relative to alternative silica supported equivalent systems in the literature, with in-pore diffusion of both substrate and product key to both performance and humin formation pathway. An increase in-pore diffusion coefficient of 5-hydroxymethylfurfural within wormlike and stellate structures results in optimal productivity. In contrast, poor diffusion within a raspberry-like morphology decreases rates of 5-hydroxymethylfurfural production and increases its consumption within humin formation.

Dendritic mesoporous nanoparticles for the detection, adsorption, and degradation of hazardous substances in the environment: State-of-the-art and future prospects

Equipped with hierarchical pores and three-dimensional (3D) center-radial channels, dendritic mesoporous nanoparticles (DMNs) make their pore volumes extremely large, specific surface areas super-high, internal spaces especially accessible, and so on. Other entities (like organic moieties or nanoparticles) can be modified onto the interfaces or skeletons of DMNs, accomplishing their functionalization for desirable applications. This comprehensive review emphasizes on the design and construction of DMNs-based systems which serve as sensors, adsorbents and catalysts for the detection, adsorption, and degradation of hazardous substances, mainly including the construction procedures of brand-new DMNs-based materials and the involved hazardous substances (like industrial chemicals, chemical dyes, heavy metal ions, medicines, pesticides, and harmful gases). The sensitive, adsorptive, or catalytic performances of various DMNs have been compared; correspondingly, the reaction mechanisms have been revealed strictly. It is honestly anticipated that the profound discussion could offer scientists certain enlightenment to design novel DMNs-based systems towards the detection, adsorption, and degradation of hazardous substances, respectively or comprehensively.

A morphological study of bicontinuous concentric lamellar silica synthesized at atmospheric pressure and its application as an internal micro-reflector in dye-sensitized solar cells

KCC-1, a nanostructured silica material with a bicontinuous concentric lamellar (bcl) morphology, provides plenty of functional characteristics, such as an open channel structure, excellent accessibility, and a large surface area. Although bcl silica exhibits various superior properties, studies on its morphology and its application in dye-sensitized solar cells (DSSCs) are still limited. Therefore, this work aims to study the influence of the synthesis time on the morphology of bcl silica. Moreover, we used the synthesized bcl silica as internal micro-reflectors in DSSCs. The bcl silica was synthesized using the reflux method by varying synthesis times. The morphology of bcl silica was observed using FESEM and HRTEM. FESEM images show that bcl silica has bicontinuous lamellar walls arranged concentrically to form spherical particles. As the synthesis time increases, the average particle size of bcl silica increases. The quantization of bcl silica binary images shows that the average lamellar cross-sectional area ratio decreases with increasing synthesis time. The simulation of the Cahn-Hilliard's spinodal decomposition model using MATLAB also describes the lamellar cross-sectional area ratio of bcl silica. In addition, to characterize the FESEM image's texture, a Shannon entropy calculation was performed. The line and circular gray value intensity profiles of the HRTEM image show that bcl silica has a denser core than the outer part. The denser core proves that the lamellae in bcl silica are concentrically arranged towards the particle core. Furthermore, we added bcl silica to a photoanode to see the effect of bcl characteristics on the DSSC performance. The results show that the bcl silica significantly improves the light-harvesting efficiency in DSSCs due to its low refractive index and open channel structure.

Dendritic Mesoporous Nanoparticles: Structure, Synthesis and Properties

Recently, a new family of "dendritic" mesoporous silica nanoparticles has attracted great interest with widespread applications. Despite a large number of publications (>800), the terminology of "dendritic" is ambiguous. Understanding what possible "dendritic structures" are, their formation mechanisms and the underlying structure-property relationship is fundamentally important. With the advance of characterization techniques such as electron tomography, two types of tree branch-like and flower-like structures can be distinguished, both described as "dendritic" in literature. In this review, we start with the definition of "dendritic", then provide critical analysis of reported dendritic silica nanoparticles according to their structural classification. We also update the understandings of the formation mechanisms of two types of "dendritic" nanoparticles, with a focus on how to control different structural parameters. Various applications of dendritic mesoporous nanoparticles are also reviewed with a focus in biomedical field, providing new insights into the structure-property relationship in this family of nanomaterials.

Graphene-like Carbon from Calcium Hydroxide

The development of inexpensive and environmentally friendly graphene-like carbon is critical for its integration into industrial products. This work highlights the production of graphene-like carbon structures from calcium hydroxide. The chemical vapor deposition conditions to grow graphitic carbon on a calcium hydroxide catalyst are reported. Acetylene, steam, and calcium hydroxide are used to grow a crumpled carbon morphology. The crumpled carbon resulted in a high surface area of 1276 m²/g and high electrical conductivity (>10⁵ S/m). Additionally, the significance and origin of the C 1s X-ray photoelectron spectroscopy (XPS) π-π* plasmon loss peak as it is related to high electrical conductivity is reported. A unique mechanism for the catalytic process involving calcium acetylide is proposed. Several deposition times, steam concentration, and catalyst morphology were tested to synthesize a variety of carbon morphologies from calcium-based materials. Crumpled carbon, hollow nanospheres, bamboo-like carbon nanotubes, multi-walled carbon nanotubes, and graphene fiber morphologies were all formed using calcium-based catalysts. Multiple reaction conditions, a scaled reaction (300 g), and catalyst recyclability were investigated. Calcium-based materials were then used as catalysts for the growth of other graphene-like carbons.

Effects of Co-Solvent Nature and Acid Concentration in the Size and Morphology of Wrinkled Mesoporous Silica Nanoparticles for Drug Delivery Applications

Hierarchically porous materials, such as wrinkled mesoporous silica (WMS), have gained interest in the last couple of decades, because of their wide range of applications in fields such as nanomedicine, energy, and catalysis. The mechanism of formation of these nanostructures is not fully understood, despite various groups reporting very comprehensive studies. Furthermore, achieving particle diameters of 100 nm or less has proven difficult. In this study, the effects on particle size, pore size, and particle morphology of several co-solvents were evaluated. Additionally, varying concentrations of acid during synthesis affected the particle sizes, yielding particles smaller than 100 nm. The morphology and physical properties of the nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and dynamic light scattering (DLS). Homogeneous and spherical WMS, with the desired radial wrinkle morphology and particle sizes smaller than 100 nm, were obtained. The effect of the nature of the co-solvents and the concentration of acid are explained within the frame of previously reported mechanisms of formation, to further elucidate this intricate process.

Biomedical applications of dendritic fibrous nanosilica (DFNS): recent progress and challenges

Dendritic fibrous nanosilica (DFNS), with multi-component and hierarchically complex structures, has recently been receiving significant attention in various fields of nano-biomedicine. DFNS is an emerging class of mesoporous nanoparticles that has attracted great interest due to unique structures such as open three-dimensional dendritic superstructures with large pore channels and highly accessible internal surface areas. This overview aims to study the application of DFNS towards biomedical investigations. This review is divided into four main sections. Sections 1–3 are related to the synthesis and characterization of DFNS. The biomedical potential of DFNS, such as cell therapy, gene therapy, immune therapy, drug delivery, imaging, photothermal therapy, bioanalysis, biocatalysis, and tissue engineering, is discussed based on advantages and limitations. Finally, the perspectives and challenges in terms of controlled synthesis and potential nano-biomedical applications towards future studies are discussed.

Dendritic fibrous nanosilica (DFNS) , with multi-component and hierarchically complex structures, has recently been receiving significant attention in various fields of nano-biomedicine.

Ultrasmall Particle Sizes of Walnut-Like Mesoporous Silica Nanospheres with Unique Large Pores and Tunable Acidity for Hydrogenating Reaction

The large particle sizes, inert frameworks, and small pore sizes of mesoporous silica nanoparticles greatly restrict their application in the acidic catalysis. The research reports a simple and versatile approach to synthesize walnut-like mesoporous silica nanospheres (WMSNs) with large tunable pores and small particle sizes by assembling with Beta seeds. The as-synthesized Beta-WMSNs composite materials possess ultrasmall particulate sizes (70 nm), large radial mesopores (≈30 nm), and excellent acidities (221.6 mmol g^-1 ). Ni₂ P active phase is supported on the surface of Beta-WMSNs composite materials, and it is found that the obtained composite spherical materials can reduce the Ni₂ P particle sizes from 8.4 to 4.8 nm with the increasing amount of Beta seeds, which can provide high accessibilities of reactants to the active sites. Furthermore, the unique large pores and ultrasmall particle sizes of Beta-WMSNs samples facilitate the reduction of the diffusion resistance of reactants due to the short transporting length, thus the corresponding Ni₂ P/Beta-WMSNs composite catalysts show the excellent hydrogenating activity compared to the pure Ni₂ P/WMSNs catalyst.

Comprehensive understanding of the synthesis and formation mechanism of dendritic mesoporous silica nanospheres

The interest in the design and controlled fabrication of dendritic mesoporous silica nanospheres (DMSNs) emanates from their widespread application in drug-delivery carriers, catalysis and nanodevices owing to their unique open three-dimensional dendritic superstructures with large pore channels and highly accessible internal surface areas. A variety of synthesis strategies have been reported, but there is no basic consensus on the elucidation of the pore structure and the underlying formation mechanism of DMSNs. Although all the DMSNs show a certain degree of similarity in structure, do they follow the same synthesis mechanism? What are the exact pore structures of DMSNs? How did the bimodal pore size distributions kinetically evolve in the self-assembly? Can the relative fractions of small mesopores and dendritic large pores be precisely adjusted? In this review, by carefully analysing the structures and deeply understanding the formation mechanism of each reported DMSN and coupling this with our research results on this topic, we conclude that all the DMSNs indeed have the same mesostructures and follow the same dynamic self-assembly mechanism using microemulsion droplets as super templates in the early reaction stage, even without the oil phase.

Covalent Immobilization of β-Glucosidase into Mesoporous Silica Nanoparticles from Anhydrous Acetone Enhances Its Catalytic Performance

An immobilization protocol of a model enzyme into silica nanoparticles was applied. This protocol exploited the use of the bifunctional molecule triethoxysilylpropylisocyanate (TEPI) for covalent binding through a linker of suitable length. The enzyme β-glucosidase (BG) was anchored onto wrinkled silica nanoparticles (WSNs). BG represents a bottleneck in the conversion of lignocellulosic biomass into biofuels through cellulose hydrolysis and fermentation. The key aspect of the procedure was the use of an organic solvent (anhydrous acetone) in which the enzyme was not soluble. This aimed to restrict its conformational changes and thus preserve its native structure. This approach led to a biocatalyst with improved thermal stability, characterized by high immobilization efficiency and yield. It was found that the apparent KM value was about half of that of the free enzyme. The Vmax was about the same than that of the free enzyme. The biocatalyst showed a high operational stability, losing only 30% of its activity after seven reuses.

Co-immobilization of metal and enzyme into hydrophobic nanopores for highly improved chemoenzymatic asymmetric synthesis

A facile, general strategy to fabricate metal–enzyme catalysts with hydrophobic microenvironment for highly improved chemoenzymatic asymmetric synthesis.

Silica Nanoflowers-Stabilized Pickering Emulsion as a Robust Biocatalysis Platform for Enzymatic Production of Biodiesel

Enzymatic production of biodiesel had attracted much attention due to its high efficiency, mild conditions and environmental protection. However, the high cost of enzyme, poor solubility of methanol in oil and adsorption of glycerol onto the enzyme limited the popularization of the process. To address these problems, we developed a silica nanoflowers-stabilized Pickering emulsion as a biocatalysis platform with Candida antarctica lipase B (CALB) as model lipase for biodiesel production. Silica nanoflowers (SNFs) were synthesized in microemulsion and served as a carrier for CALB immobilization and then used as an emulsifier for constructing Pickering emulsion. The structure of SNFs and the biocatalytic Pickering emulsion (CALB@SNFs-PE) were characterized in detail. Experimental data about the methanolysis of waste oil to biodiesel was evaluated by response surface methodology. The highest experimental yield of 98.5 ± 0.5% was obtained under the optimized conditions: methanol/oil ratio of 2.63:1, a temperature of 45.97 °C, CALB@SNFs dosage of 33.24 mg and time of 8.11 h, which was closed to the predicted value (100.00%). Reusability test showed that CALB@SNFs-PE could retain 76.68% of its initial biodiesel yield after 15 cycles, which was better than that of free CALB and N435.

Improving the size uniformity of dendritic fibrous nano-silica by a facile one-pot rotating hydrothermal approach

This article provides a facile, low-cost, and reproducible one-pot rotating hydrothermal approach to synthesize dendritic fibrous nano-silica with outstanding uniformity.

High Performance Shape-Stabilized Phase Change Material with Nanoflower-Like Wrinkled Mesoporous Silica Encapsulating Polyethylene Glycol: Preparation and Thermal Properties

Nanoflower-like wrinkled mesoporous silica (NFMS) was prepared for further application as the carrier of polyethylene glycol (PEG) to fabricate the new, shape-stabilized phase change composites (PEG/NFMS); NFMS could improve the loading content of PEG in the PEG/NFMS. To investigate the properties of PEG/NFMS, characterization approaches, such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) analysis, and differential scanning calorimetry (DSC), were carried out. The characterization results illustrated that the PEG was completely adsorbed in the NFMS by physical adsorption, and the nanoflower-like wrinkled silica did not affect the crystal structure of PEG. As reported by the DSC test, although NFMS had a restriction influence on the activity of the PEG molecules, the melting and binding enthalpies of the PEG/NFMS could reach 136.6 J/g and 132.6 J/g, respectively. In addition, the TGA curves demonstrated that no evident weight loss was observed from 20 °C to 190 °C for the PEG/NFMS, and the results revealed that the PEG/NFMS had remarkable thermal stability. These results indicated that the NFMS is a potential carrier of organic phase change material for the preparation of shape-stabilized phase change composites.

Synthesis of Hierarchical Silica/Titania Hollow Nanoparticles and Their Enhanced Electroresponsive Activity

Wrinkled silica nanoparticle (WSN)-based hollow SiO₂/TiO₂ nanoparticles (W-HNPs) with hierarchically arrayed internal surfaces were prepared via the combination of sol-gel, TiO₂ coating, and etching of core template techniques. The hierarchical internal surface of W-HNPs was attained using WSNs as a core template. Compared with SiO₂ sphere-templated hollow SiO₂/TiO₂ nanoparticles (S-HNPs) with flat inner surfaces, W-HNPs displayed distinctive surface areas, TiO₂ loading amounts, and dielectric properties arising from the hierarchical internal surface. The unique properties of W-HNPs were further investigated as an electrorheological (ER) material. W-HNP-based ER fluids exhibited ca. 1.9-fold enhancement in the ER efficiency compared to that of S-HNP-based ER fluids. Such enhancement was attributed to the unique inner surface of W-HNPs, which effectively enhanced the polarizability by increasing the number of charge accumulation sites, and to the presence of the high-dielectric TiO₂. This study demonstrated the advantages, in terms of practical ER applications, of hollow nanomaterials having uniquely arrayed internal spaces.

Mesoporous silica nanoparticles with wrinkled structure as the matrix of myristic acid for the preparation of a promising new shape-stabilized phase change material via simple method

Wrinkled mesoporous silica nanoparticle (WMSN), with a special and highly uniform morphology, large specific surface area and pore volume, high porosity and radial-like wrinkled channels, was successfully prepared by a simple and easy synthetic method. WMSN was used as the matrix of myristic acid (MA) to prepare a new attractive shape-stabilized PCM (MA/WMSN), and the wrinkled channels of WMSN are useful to prevent the leakage of PCM, and increase the thermal stability and phase change enthalpy of shape-stabilized PCM. Characterizations of MA/WMSN, such as structure, crystallization properties, chemical properties and thermal properties were studied, and the interaction mechanism between the WMSN and MA molecules was elucidated. TGA results suggested that MA/WMSN had excellent thermal stability. When the loading of MA in MA/WMSN was 65%, the melting and crystallizing enthalpies of MA/WSSN were 92.0 J g⁻¹ and 86.0 J g⁻¹, respectively. Additionally, the thermal conductivity of MA/WMSN was 0.37 W mK⁻¹, which was about 1.37 times higher than that of the pure MA. All of the study results demonstrated that MA/WMSN possessed of favourable thermal conductivity, high latent heats and excellent thermal stability, and therefore it could be a suitable thermal energy storage material for practical applications.

Mesoporous silica nanoparticle with wrinkled structure as the matrix of myristic acid for the preparation of a promising new shape-stabilized phase change material via simple method.

Unraveling the Formation Mechanism of Dendritic Fibrous Nanosilica

We studied the formation mechanism of dendritic fibrous nanosilica (DFNS) that involves several intriguing dynamical steps. Through electron microscopy and real-time small-angle X-ray scattering studies, it has been demonstrated that the structural evolution of bicontinuous microemulsion droplets (BMDs) and their subsequent coalescence, yielding nanoreactor template, is responsible for to the formation of complex DFNS morphology. The role of cosurfactant has been found to be quite crucial, which allowed the understanding of this intricate mechanism involving the complex interplay of self-assembly, dynamics of BMDs formation, and coalescence. The role of BMDs in formation of DFNS has not been reported so far and the present work allows a deeper molecular-level understanding of DFNS formation.

Dendritic Fibrous Nanosilica for Catalysis, Energy Harvesting, Carbon Dioxide Mitigation, Drug Delivery, and Sensing

Morphology-controlled nanomaterials such as silica play a crucial role in the development of technologies for addressing challenges in the fields of energy, environment, and health. After the discovery of Stöber silica, followed by that of mesoporous silica materials, such as MCM-41 and SBA-15, a significant surge in the design and synthesis of nanosilica with various sizes, shapes, morphologies, and textural properties has been observed in recent years. One notable invention is dendritic fibrous nanosilica, also known as KCC-1. This material possesses a unique fibrous morphology, unlike the tubular porous structure of various conventional silica materials. It has a high surface area with improved accessibility to the internal surface, tunable pore size and pore volume, controllable particle size, and, importantly, improved stability. Since its discovery, a large number of studies have been reported concerning its use in applications such as catalysis, solar-energy harvesting, energy storage, self-cleaning antireflective coatings, surface plasmon resonance-based ultrasensitive sensors, CO2 capture, and biomedical applications. These reports indicate that dendritic fibrous nanosilica has excellent potential as an alternative to popular silica materials such as MCM-41, SBA-15, Stöber silica, and mesoporous silica nanoparticles. This Review provides a critical survey of the dendritic fibrous nanosilica family of materials, and the discussion includes the synthesis and formation mechanism, applications in catalysis and photocatalysis, applications in energy harvesting and storage, applications in magnetic and composite materials, applications in CO2 mitigation, biomedical applications, and analytical applications.

Evaluation of mesoporous silica nanoparticles for oral drug delivery - current status and perspective of MSNs drug carriers

The oral pathway is considered as the most common method for drug administration, although many drugs, especially the highly pH- and/or enzymatic biodegradable peptide drugs, are very difficult to formulate and achieve a good intestinal absorption. Efficient systematic absorption of an active substance, delivered via oral ingestion, is only achievable if the drug (1) is substantially present as a solution in the gastrointestinal tract, (2) is able to penetrate through the intestinal mucus, (3) overcomes the different gastrointestinal barriers, and (4) provides an effective therapeutic dose. Therefore, optimization of oral bioavailability of poorly-soluble drugs still remains a significant challenge for the pharmaceutical industry. Even though numerous conventional drug carriers have successfully solved some of the issues related to oral delivery of poorly-soluble drugs, only few of them met commercialization requirements. These drawbacks have led the scientific world to reconsider its approaches toward targeted drug delivery systems and researchers started looking for alternative vectorized carriers. In this area, nanoparticle-based materials have several significant advantages over free and non-formulated drugs. For example, nanosized porous silica carriers allow for more sustained and controlled drug release or improved oral bioavailability. Thus, in the present review, we will highlight the most important features of nanostructured silica drug carriers, such as particle size, particle shape, surface roughness or surface functionalization, and underline the key advantages of these nanosupports. In particular, this article will discuss recent progress and challenges in the area of mesoporous silica nanocarriers used for oral drug delivery. Additional emphasis will be set on the biological and chemical features of the gastrointestinal tract as well as currently tested nanoformulations and strategies to avoid drug degradation in the gastrointestinal environment.

Tunable Synthesis of Mesoporous Silica Particles with Unique Radially Oriented Pore Structures from Tetramethyl Orthosilicate via Oil-Water Emulsion Process

Numerous studies of the synthesis of mesoporous silica (MPS) particles with tailored properties have been published. Among those studies, tetraethyl orthosilicate (TEOS) is commonly used as a silica source, but tetramethyl orthosilicate (TMOS) is rarely used because its reaction is fast and difficult to control. In this study, MPS particles were synthesized via one-step controlled polymerization of styrene and hydrolysis of TMOS, followed by the addition of hexadecyltrimethylammonium bromide (CTAB) and n-octane. The MPS particles obtained from TMOS generally have small inner pores, but the MPS particles obtained in this study had a unique radially oriented structure, a high surface area up to 800 m² g^-1, and large pores, of size 20 nm. The content of styrene in the emulsion system played a key role in increasing pore sizes of the MPS particles. A plausible mechanism for particle formation based on the phase behavior and type of the emulsion system is proposed. For further research, this material is expected to be useful for various applications, such as in drug delivery, filtration, and catalyst supports.

A magnetically recoverable photocatalyst prepared by supporting TiO2nanoparticles on a superparamagnetic iron oxide nanocluster core@fibrous silica shell nanocomposite

A magnetically recoverable photocatalyst was prepared by supporting TiO₂nanoparticles on a superparamagnetic iron oxide nanocluster core@fibrous silica shell nanocomposite.

Wrinkled silica/titania nanoparticles with tunable interwrinkle distances for efficient utilization of photons in dye-sensitized solar cells

Efficient light harvesting is essential for the realization of high energy conversion efficiency in dye-sensitized solar cells (DSCs). State-of-the-art mesoporous TiO₂ photoanodes fall short for collection of long-wavelength visible light photons, and thus there have been efforts on introduction of scattering nanoparticles. Herein, we report the synthesis of wrinkled silica/titania nanoparticles with tunable interwrinkle distances as scattering materials for enhanced light harvesting in DSCs. These particles with more than 20 times larger specific surface area (>400 m²/g) compared to the spherical scattering particles (<20 m²/g) of the similar sizes gave rise to the dye-loading amounts, causing significant improvements in photocurrent density and efficiency. Moreover, dependence of spectral scattering properties of wrinkled particles on interwrinkle distances, which was originated from difference in overall refractive indices, was observed.

Synthesis and characterization of fibrous silica ZSM-5 for cumene hydrocracking

Fibrous silica ZSM-5 (FZSM-5) with a novel dendrimeric morphology was synthesized using a CTAB-based microemulsion system. The dendrimers increased the active site accessibility and enhanced the catalytic activity for large molecule hydrocracking and ethylbenzene dehydrogenation.