Preparation of compact nanoparticle clusters from polyethylene glycol-coated gold nanoparticles by fine-tuning colloidal interactions

Interfacial Behavior of Biodegradable Poly(lactic-co-glycolic acid)-Pluronic F127 Nanoparticles and Its Impact on Pickering Emulsion Stability

Biodegradable nanoparticle-based emulsions exhibit immense potential in various applications, particularly in the pharmaceutical, cosmetic, and food industries. This study delves into the intricate interfacial behavior of Pluronic F127 modified poly(lactic-co-glycolic acid) (PLGA-F127) nanoparticles, a crucial determinant of their ability to stabilize Pickering emulsions. Employing a combination of Langmuir balance, surface tension, and diffusion coefficient measurements, we investigate the interfacial dynamics of PLGA-F127 nanoparticles under varying temperature and ionic strength conditions. Theoretical calculations are employed to elucidate the underlying mechanisms governing these phenomena. Our findings reveal a profound influence of temperature-dependent Pluronic layer behavior and electrostatic and steric interactions on the interfacial dynamics. Nonlinear changes in surface tension are observed, reflecting the interplay of these factors. Particle aggregation is found to be prevalent at elevated temperatures and ionic strengths, compromising the stability and emulsification efficiency of the formed emulsions. This work provides insights into the rational design of stable and efficient biodegradable nanoparticle-based Pickering emulsions, broadening their potential applications in various fields.

Directional Self-Assembly of Nanoparticles Coated with Thermoresponsive Block Copolymers and Charged Small Molecules

Herein, we report the directional stimuli-responsive self-assembly of gold nanoparticles (AuNPs) coated with a thermoresponsive block copolymer (BCP), poly(ethylene glycol)-b-poly(N-isopropylacrylamide) (PEG-b-PNIPAM) and charged small molecules. AuNPs modified with PEG-b-PNIPAM possessing a AuNP/PNIPAM/PEG core/active/shell structure undergo temperature-induced self-assembly into one-dimensional (1D) or two-dimensional (2D) structures in salt solutions, with the morphology varying with the ionic strength of the medium. Salt-free self-assembly is also realized by modulating the surface charge by the codeposition of positively charged small molecules; 1D or 2D assemblies are formed depending on the ratio between the small molecule and PEG-b-PNIPAM, consistent with the trend observed with the bulk salt concentration. A series of charge-controlled self-assembly at various conditions revealed that the temperature-induced BCP-mediated self-assembly reported here provides an effective means for on-demand directional self-assembly of nanoparticles (NPs) with controlled morphology, interparticle distance, and optical properties, and the fixation of high-temperature structures.

Formation of kinetically trapped small clusters of PEGylated gold nanoparticles revealed by the combination of small-angle X-ray scattering and visible light spectroscopy

Gold nanoparticles coated with polyethylene glycol (PEG) are able to form clusters due to the collapse of the surface-grafted polymer chains when the temperature and ion concentration of the aqueous medium are increased. The chain collapse reduces the steric repulsion, leading to particle aggregation. In this work, we combine small angle X-ray scattering (SAXS) and visible light spectroscopy to elucidate the structure of the developing clusters. The structure derived from the SAXS measurements reveals a decrease in interparticle distance and drastic narrowing of its distribution in the cluster, indicating restricted particle mobility and displacement within the cluster. Surprisingly, instead of forming a large crystalline phase, the evolving clusters are composed of about a dozen particles. The experimental optical extinction spectra measured during cluster formation can be very well reproduced by optical simulations based on the SAXS-derived structural data.

Noble-Metal Nanorod Cryoaerogels with Electrocatalytically Active Surface Sites

Noble-metal-based electrocatalysts usually contain small nanoparticle building blocks to ensure a high specific surface area as the scene for the surface processes. Here, we show that relatively large noble-metal nanorods are also promising candidates to build up functional macrostructures with prominent electrocatalytic activity. After optimizing and upscaling the syntheses of gold nanorods and gold bipyramid-templated silver nanorods, cryoaerogels are fabricated on a conductive substrate via flash freezing and subsequent freeze drying. The versatile cryoaerogelation technique allows the formation of macrostructures with dendritic, open-pore structure facilitating the increase of the accessible nanorod surfaces. It is demonstrated via electrochemical oxidation and stripping test experiments that noble-metal surface sites are electrochemically active in redox reactions. Furthermore, gold nanorod cryoaerogels offer a platform for redox sensing, ethanol oxidation reaction, as well as glucose sensing. Compared to their simply drop-cast and dried counterparts, the noble-metal nanorod cryoaerogels offer enhanced activity due to the open porosity of the fabricated nanostructure while maintaining structural stability.

Distinct thermoresponsive behaviour of oligo- and poly-ethylene glycol protected gold nanoparticles in concentrated salt solutions

In this work, the methoxy terminated oligo- and polyethylene glycol of different chain lengths (EGn, n = 7, 18, 45 and 136) is grafted on AuNP surfaces under conditions where they attain maximum grafting densities. These EGn-AuNPs gain stability relative to the pristine c-AuNPs in aqueous solutions and in a wide temperature interval and they form stable suspensions in solutions of high NaCl concentrations. To show the thermoresponsive properties of these EGn-AuNPs, temperature titration experiments are carried out in the presence of increasing amounts of salts. The concentrations of NaCl are chosen by checking the stability of EGn-AuNPs at room temperature and choosing the highest concentrations that allow them to form stable suspensions. The analysis of the temperature titration experiments monitored by UV-visible spectroscopy and dynamic light scattering allows us to establish the existence of transitions from individual to assembled nanoparticles, the reversibility of the temperature transitions and hysteretic behaviour in these systems. While EG7-AuNPs only show reversible temperature transitions in the presence of 5 mM NaCl, EG18-AuNPs do up to 1 M NaCl, becoming only partially reversible in 2 M NaCl. The titrations of EG45-AuNPs in 3 and 5 M NaCl show irreversible temperature transitions. Finally, EG136-AuNPs present a complex and interesting behaviour with two temperature transitions, the first one showing hysteresis and the second being reversible.

Molecular configuration-mediated thermo-responsiveness in oligo(ethylene glycol) derivatives attached on gold nanoparticles

Biomolecular systems actively control their local environment on a sub-nm scale via changes in molecular configuration from their flexible structures and derive emergent functions. Although this functional emergence based on local environmental control is attracting a great deal of attention in chemistry, it remains challenging to realize this artificially. Herein, we report the tuning of the thermo-responsive properties of oligo(ethylene glycol) (OEG) derivatives attached on gold nanoparticles via local environmental control not only by the hydrophobic moiety at their terminus but also by their molecular configuration. OEG-attached alkane thiol-modified AuNPs showed thermo-responsive assembly/disassembly in water through the hydration/dehydration of the OEG portions in a manner dependent both on the hydrophobicity at their terminus and the surface curvature of the core nanoparticles. Further, the assembly temperature (T _A) was also tuned by ligand mixing with a non-thermo-responsive ligand with a shorter OEG length. Molecular dynamics simulations show that the distribution of the hydrophobic terminus in the normal direction along the gold surface varied in accordance with the surface curvature, indicating variations in molecular configuration. It is expected that a bent configuration could accelerate the thermo-responsiveness of OEG by allowing them greater accessibility to the hydrophobic terminus. Experimental and simulation results support the notion that local OEG density tuning by surface curvature or ligand mixing with a different OEG length leads to different degrees of accessibility to the hydrophobic terminus via changes in molecular configuration, promoting local environmental control-directed assembly temperature tuning.

Multi-stimuli-responsive aggregation of nanoparticles driven by the manipulation of colloidal stability

The capacity to control the dispersed or aggregated state of colloidal particles is particularly attractive for facilitating a diverse range of smart applications. For this reason, stimuli-responsive nanoparticles have garnered much attention in recent years. Colloidal systems that exhibit multi-stimuli-responsive behaviour are particularly interesting materials due to the greater spatial and temporal control they display in terms of dispersion/aggregation status; such behaviour can be exploited for implant formation, easy separation of a previously dispersed material or for the blocking of unwanted pores. This review will provide an overview of the recent publications regarding multi-stimuli-responsive microgels and hybrid core-shell nanoparticles. These polymer-based nanoparticles are highly sensitive to environmental conditions and can form aggregated clusters due to a loss of colloidal stability, triggered by temperature, pH and ionic strength stimuli. We aim to provide the reader with a discussion of the recent developments in this area, as well as an understanding of the fundamental concepts which underpin the responsive behaviour, and an exploration of their applications.

Cyclic Polyethylene Glycol as Nanoparticle Surface Ligand

Cyclic polymers behave different than linear polymers due to the lack of end groups and smaller coil dimensions. Herein, we demonstrate that cyclic polyethylene glycol (PEG) can be used as an alternative of classical linear PEG ligands for gold nanoparticle (AuNP) stabilization. We observed that the brush height of cyclic PEG on AuNPs of diameter 4.4 and 13.2 nm increases identically as that of linear brushes with (Nσ^1/2)^0.7 (N, number of monomers in a chain and σ, grafting density) and that cyclic brushes are more stretched than their linear analogues when compared to their unperturbed dimensions. Such structural effect and the reduced footprint diameter in cyclic brushes with the entire chain in a concentrated polymer brush regime explains the distinct response of NPs to ionic strength and temperature, respectively, compared to linear analogues. These experiments are an important step in understanding the effect of polymer brush topology on colloidal properties.

Fabrication and SERS properties of complex and organized nanoparticle plasmonic clusters stable in solution

SERS activity can be increased by the formation of hot spots at the interparticle junctions of plasmonic nanoparticles in very close proximity, dramatically improving the enhancement factors in comparison with isolated nanoparticles. Controlling the number and geometrical architecture of hot spots, while endowing the clusters with colloidal stability, results in feasible optical sensors, able to provide quantitative SERS responses. Here, we review the approaches proposed to date to produce colloidal stable clusters, focusing on the control of the coordination number of nanoparticle assemblies and interparticle gaps. Clusters of spherical nanoparticles of the same size and rods of the same size are described to subsequently outline core-satellite constructs of nanoparticles of different sizes. Besides, purification processes for nanoparticle clusters are revised to provide efficient production in high yields.

A Versatile Route to Assemble Semiconductor Nanoparticles into Functional Aerogels by Means of Trivalent Cations

3D nanoparticle assemblies offer a unique platform to enhance and extend the functionality and optical/electrical properties of individual nanoparticles. Especially, a self-supported, voluminous, and porous macroscopic material built up from interconnected semiconductor nanoparticles provides new possibilities in the field of sensing, optoelectronics, and photovoltaics. Herein, a method is demonstrated for assembling semiconductor nanoparticle systems containing building blocks possessing different composition, size, shape, and surface ligands. The method is based on the controlled destabilization of the particles triggered by trivalent cations (Y³⁺ , Yb³⁺ , and Al³⁺ ). The effect of the cations is investigated via X-ray photoelectron spectroscopy. The macroscopic, self-supported aerogels consist of the hyperbranched network of interconnected CdSe/CdS dot-in-rods, or CdSe/CdS as well as CdSe/CdTe core-crown nanoplatelets is used to demonstrate the versatility of the procedure. The non-oxidative assembly method takes place at room temperature without thermal activation in several hours and preserves the shape and the fluorescence of the building blocks. The assembled nanoparticle network provides longer exciton lifetimes with retained photoluminescence quantum yields, that make these nanostructured materials a perfect platform for novel multifunctional 3D networks in sensing. Various sets of photoelectrochemical measurements on the interconnected semiconductor nanorod structures also reveal the enhanced charge carrier separation.

Pressure-Stimulated Supercrystal Formation in Nanoparticle Suspensions

Nanoparticles can self-organize into "supercrystals" with many potential applications. Different paths can lead to nanoparticle self-organization into such periodic arrangements. An essential step is the transition from an amorphous state to the crystalline one. We investigate how pressure can induce a phase transition of a nanoparticle model system in water from the disordered liquid state to highly ordered supercrystals. We observe reversible pressure-induced supercrystal formation in concentrated solutions of gold nanoparticles by means of small-angle X-ray scattering. The supercrystal formation occurs only at high salt concentrations in the aqueous solution. The pressure dependence of the structural parameters of the resulting crystal lattices is determined. The observed transition can be reasoned with the combined effect of salt and pressure on the solubility of the organic PEG shell that passivates the nanoparticles.

Entropy-Driven Reversible Agglomeration of Crown Ether Capped Gold Nanoparticles

It is shown that plasmonic gold nanoparticles functionalised with a thiolated 18-crown-6 ligand shell agglomerate spontaneously from aqueous dispersion at elevated temperatures. This process takes place over a narrow temperature range, is accompanied by a colour change from red to purple-blue and is fully reversible. Moreover, the temperature at which it occurs can be adjusted by the degree of complexation of the crown ether moiety with appropriate cations. More complexation leads to higher transition temperatures. The process has been studied by UV/Vis spectroscopy, electron microscopy, dynamic light scattering and zeta potential measurements. A thermodynamic rationale is provided to suggest an entropy-driven endothermic agglomeration process based on attractive hydrophobic interactions of the complexed crowns that are competing against electrostatic repulsion of the charged ligand shells.

Self-assembly of like-charged nanoparticles into Voronoi diagrams

The self-assembly of nanoscopic building blocks into higher order macroscopic patterns is one possible approach for the bottom-up fabrication of complex functional systems. Macroscopic pattern formation, in general, is determined by the reaction and diffusion of ions and molecules. In some cases macroscopic patterns emerge from diffusion and interactions existing between nanoscopic or microscopic building blocks. In systems where the distribution of the interaction-determining species is influenced by the presence of a diffusion barrier, the evolving macroscopic patterns will be determined by the spatiotemporal evolution of the building blocks. Here we show that a macroscopic pattern can be generated by the spatiotemporally controlled aggregation of like-charged carboxyl-terminated gold nanoparticles in a hydrogel, where clustering is induced by the screening effect of the sodium ions that diffuse in a hydrogel. Diffusion fronts of the sodium ions and the induced nanoparticle aggregation generate Voronoi diagrams, where the Voronoi cells consist of aggregated nanoparticles and their edges are aggregation-free and nanoparticle-free zones. We also developed a simple aggregation-diffusion model to adequately describe the evolution of the experimentally observed Voronoi patterns.

Nanoparticle Clusters: Assembly and Control Over Internal Order, Current Capabilities, and Future Potential

The current state of the art in the use of colloidal methods to form nanoparticle assemblies, or clusters (NPCs) is reviewed. The focus is on the two-step approach, which exploits the advantages of bottom-up wet chemical NP synthesis procedures, with subsequent colloidal destabilization to trigger assembly in a controlled manner. Recent successes in the application of functional NPCs with enhanced emergent collective properties for a wide range of applications, including in biomedical detection, surface enhanced Raman scattering (SERS) enhancement, photocatalysis, and light harvesting, are highlighted. The role of the NP-NP interactions in the formation of monodisperse ordered clusters is described and the different assembly processes from a wide range of literature sources are classified according to the nature of the perturbation from the initial equilibrium state (dispersed NPs). Finally, the future for the field and the anticipated role of computational approaches in developing next-generation functional NPCs are briefly discussed.

Assembling patchy nanorods with spheres: limitations imposed by colloidal interactions

For gold nanorods the intrinsic shape-anisotropy offers the prospect of anisotropic assembly, provided that their region-selective surface modification can be realized. Here we developed nanorods with a patchy surface chemistry, featuring positively charged molecules in the tip region and polymer molecules at the sides by careful control of molecule concentrations during ligand exchange. When these patchy nanorods are assembled with small negatively charged spherical particles, electric double layer interaction can direct the assembly of two nanospheres at the opposite ends of the nanorods. The PEG chains promote the selectivity of the procedure. As the size of the nanospheres increases, they start to shift towards the side of the nanorod due to increased van der Waals interaction. When the relative size of the nanospheres is even larger, only a single nanosphere is assembled, but instead of the tip region, they are attached to the side of the nanorods. The apparent cross-over of the region-selectivity can be interpreted in terms of colloidal interactions, i.e. the second spherical particle is excluded due to nanosphere-nanosphere electric double layer repulsion, while the large vdW attraction results in a side positioning of the single adsorbed spherical particle. The results underline the importance of absolute values of the different interaction strengths and length scales in the programmed assembly of patchy nanoscale building blocks.

Identification of Dewetting Stages and Preparation of Single Chain Gold Nanoparticle Rings by Colloidal Lithography

Massively parallel nanoparticle assembly was carried out by means of colloidal lithographic experiments over a silicon substrate supported (sub)microparticle Langmuir-Blodgett monolayer, using high purity aqueous solution of PEGylated gold nanoparticles. The size of the polystyrene template particles in the monolayer was varied between 608 nm and 2.48 μm, while gold nanoparticles with diameters between 18 and 65 nm were used. Thanks to the PEGylation of the gold nanoparticles, they could be used as tracer objects to follow the drying process. In this way, different dewetting stages could be identified in the confined space between and underneath the template polystyrene spheres. Depending on the concentration of the nanoparticles, the presented approach allows the preparation of single-particle width necklace structures composed of gold particles. At the same time, the high purity of the substrate as well as of the evolved particle rings is preserved and unwanted particle deposition on the substrate surface is minimized.

Aggregation kinetics and cluster structure of amino-PEG covered gold nanoparticles

Perturbation induced directed self-assembly of amino PEGylated gold nanoparticles: kinetics of aggregation and cluster structure.

Constructing nanosized CdTe nanocrystal clusters with thermo-responsive photoluminescence characteristics

Photoluminescence clusters of CdTe nanocrystals self-assembled by PNAEAM-b-PNIPAM copolymers represent sensitive and reversible thermo-responsive properties in aqueous solutions.