Ag/FeCo/Ag core/shell/shell magnetic nanoparticles with plasmonic imaging capability

Bioimaging Probes Based on Magneto-Fluorescent Nanoparticles

Novel nanomaterials are of interest in biology, medicine, and imaging applications. Multimodal fluorescent-magnetic nanoparticles demand special attention because they have the potential to be employed as diagnostic and medication-delivery tools, which, in turn, might make it easier to diagnose and treat cancer, as well as a wide variety of other disorders. The most recent advancements in the development of magneto-fluorescent nanocomposites and their applications in the biomedical field are the primary focus of this review. We describe the most current developments in synthetic methodologies and methods for the fabrication of magneto-fluorescent nanocomposites. The primary applications of multimodal magneto-fluorescent nanoparticles in biomedicine, including biological imaging, cancer treatment, and drug administration, are covered in this article, and an overview of the future possibilities for these technologies is provided.

Synthesis and Characterization of Magnetoplasmonic Air-Stable Au@FeCo

The synthesis of FeCo alloys as highly magnetic nanoparticles has been valuable, as far as applications for magnetic nanoparticles are concerned. However, recently, a field of magnetoplasmonics in which magnetic nanoparticles such as the FeCo alloys doped with plasmonic materials such as Au and Ag to create a hybrid nanostructure with both properties has emerged. These magnetoplasmonic metamaterials have greatly enhanced the limit of detection of analytes in spectroscopic methods, as well as providing a more widely applicable nanoparticle to broaden the use of FeCo alloys even further. Herein, we discuss the synthesis of high-yield and fairly monodisperse spherical FeCo and Au-doped FeCo (Au@FeCo) with varying compositions of Au synthesized via the thermal decomposition of iron pentacarbonyl (Fe(CO)₅) and dicobalt octacarbonyl (Co₂(CO)₈), followed by the addition of Au atoms using triphenylphosphine gold(I) chloride ((Ph₃P)AuCl) via both coprecipitation and by delayed addition methods. The products were separated using a hand-held magnet, and then characterized via ultraviolet-visible light (UV-vis), scanning electron microscopy coupled with energy-dispersive X-ray analysis (SEM-EDX), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), flame atomic absorption spectrometry (F-AAS), and magnetization measurements. Optical studies revealed a plasmonic peak at 550 nm in the Au@FeCo nanoparticles that had a gold content (%Au) of >2% (by weight), determined using F-AAS. Colocation of the Fe, Co, and Au were demonstrated through EDX analysis. Location of the Au atoms in the core were seen through high-resolution bright-field imaging. To understand the use of these nanoparticles for potential application in therapeutics and/or electronics, resistance measurements were performed to assess power loss as a function of frequency. We also achieved magnetization values as high as 150 emu/g and as low as 50 emu/g for gold-loaded samples based on %Au by weight. This paves the way to continue to develop magneto-plasmonic structures chemically using these synthesis strategies.

Quick and Mild Isolation of Intact Lysosomes Using Magnetic-Plasmonic Hybrid Nanoparticles

Rapid and efficient isolation of intact lysosomes is necessary to study their functions and metabolites by proteomic analysis. We developed a swift and robust nanoparticle-based magnetic separation method in which magnetic-plasmonic hybrid nanoparticles (MPNPs) conjugated with amino dextran (aDxt) were targeted to the lumen of lysosomes via the endocytosis pathway. For well-directed magnetic separation of the lysosomes, it is important to trace the intracellular trafficking of the aDxt-conjugated MPNPs (aDxt-MPNPs) in the endocytosis pathway. Therefore, we analyzed the intracellular transport process of the aDxt-MPNPs by investigating the time-dependent colocalization of plasmonic scattering of aDxt-MPNPs and immunostained marker proteins of organelles using the threshold Manders' colocalization coefficient (R_t). Detailed analysis of time variations of R_t for early and late endosomes and lysosomes allowed us to derive the transport kinetics of aDxt-MPNPs in a cell. After confirming the incubation time required for sufficient accumulation of aDxt-MPNPs in lysosomes, the lysosomes were magnetically isolated as intact as possible. By varying the elapsed time from homogenization to complete isolation of lysosomes (t_delay) and temperature (T), the influences of t_delay and T on the protein composition of the lysosomes were investigated by polyacrylamide gel electrophoresis and amino acid analysis. We found that the intactness of lysosomes could become impaired quite quickly, and to isolate lysosomes as intact as possible with high purity, t_delay = 30 min and T = 4 °C were optimal settings.

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

Composite materials are made from two or more constituent materials with distinct physical or chemical properties that, when combined, produce a material with characteristics which are at least to some degree different from its individual components. Nanocomposite materials are composed of different materials of which at least one has nanoscale dimensions. Common types of nanocomposites consist of a combination of two different elements, with a nanoparticle that is linked to, or surrounded by, another organic or inorganic material, for example in a core-shell or heterostructure configuration. A general family of nanoparticle composites concerns the coating of a nanoscale material by a polymer, SiO2 or carbon. Other materials, such as graphene or graphene oxide (GO), are used as supports forming composites when nanoscale materials are deposited onto them. In this Review we focus on magnetic nanocomposites, describing their synthetic methods, physical properties and applications. Several types of nanocomposites are presented, according to their composition, morphology or surface functionalization. Their applications are largely due to the synergistic effects that appear thanks to the co-existence of two different materials and to their interface, resulting in properties often better than those of their single-phase components. Applications discussed concern magnetically separable catalysts, water treatment, diagnostics-sensing and biomedicine.

Recent insights in magnetic hyperthermia: From the "hot-spot" effect for local delivery to combined magneto-photo-thermia using magneto-plasmonic hybrids

Magnetic hyperthermia which exploits the heat generated by magnetic nanoparticles (MNPs) when exposed to an alternative magnetic field (AMF) is now in clinical trials for the treatment of cancers. However, this thermal therapy requires a high amount of MNPs in the tumor to be efficient. On the contrary the hot spot local effect refers to the use of specific temperature profile at the vicinity of nanoparticles for heating with minor to no long-range effect. This magneto-thermal effect can be exploited as a relevant external stimulus to temporally and spatially trigger drug release. In this review, we focus on recent advances in magnetic hyperthermia. Indirect experimental proofs of the local temperature increase are first discussed leading to a good estimation of the temperature at the surface (from 0.5 to 6 nm) of superparamagnetic NPs. Then we highlight recent studies illustrating the hot-spot effect for drug-release. Finally, we present another recent strategy to enhance the efficacity of thermal treatment by combining photothermal therapy with magnetic hyperthermia mediated by magneto-plasmonic nanoplatforms.

Plasmon induced magneto-optical enhancement in metallic Ag/FeCo core/shell nanoparticles synthesized by colloidal chemistry

The combination of magnetic and plasmonic materials and their nanostructurization have revealed a prominent pathway to develop novel photonic materials for the active control of the light polarization using a magnetic field. Until now, physical growth methods have been the only exploitable approach to prepare these types of nanostructures. Here, we demonstrate the chemical synthesis of magneto-plasmonic core/shell nanocrystals with enhanced magnetic control of optical properties comparable to the best results reported for nanostructure growth by physical methods. Ag/FeCo core/shell nanocrystals were synthesized using a combination of hot injection and polyol approaches, demonstrating that the well-defined structures of both components, their interface and the optimized morphology, where the plasmonic and magnetic components are placed in the core and the shell regions, are responsible for the observed large enhancement of magnetic control of light polarization. Therefore, there is a possibility to develop tunable magneto-optical materials from hybrid magneto-plasmonic structures synthesized by chemical methods.

Magnetic Separation of Autophagosomes from Mammalian Cells Using Magnetic-Plasmonic Hybrid Nanobeads

Developments in subcellular fractionation strategies have provided the means to analyze the protein and lipid composition of organelles by proteomics. Here, we developed ultrasmall magnetic-plasmonic hybrid nanobeads and applied them to the isolation of autophagosomes by applying a magnetic field. The beads were chemically synthesized and comprised an Ag/FeCo/Ag core/shell/shell structure with a mean diameter of 15 nm. The Ag core and the FeCo shell conferred imaging and magnetic separation capabilities, respectively. The nanobeads were transfected into mammalian cells by lipofection. Thirty minutes after lipofection, the nanobeads colocalized with Vps26 and subsequently with LC3. Cell lysates were prepared at the appropriate time points and were subjected to magnetic separation. The separated fraction contained LC3-II, transferrin receptor, and LAMP2, but not LC3-I, suggesting that autophagosomes engulfing endosomal origin had been isolated. The magnetic separation process was completed in less than 30 min, providing a rapid method for isolation of autophagosomes. The present organelle isolation technique using the hybrid nanobeads with imaging and magnetic separation capabilities is highly promising for isolation of other types of organelles such as endosomes and endosome-related organelles.

AuFePt Ternary Homogeneous Alloy Nanoparticles with Magnetic and Plasmonic Properties

Combining Au and Fe into a single nanoparticle is an attractive way to engineer a system possessing both plasmonic and magnetic properties simultaneously. However, the formation of the AuFe alloy is challenging because of the wide miscibility gap for these elements. In this study, we synthesized AuFePt ternary alloy nanoparticles as an alternative to AuFe alloy nanoparticles, where Pt is used as a mediator that facilitates alloying between Au and Fe in order to form ternary alloy nanoparticles. The relationship among composition, structure, and function is investigated and it was found that at an optimized composition (Au₅₂Fe₃₀Pt₁₈), ternary alloy NPs exhibit both magnetic and plasmonic properties simultaneously. The plasmonic properties are investigated in detail using a theoretical Mie model, and we found that it is governed by the dielectric constant of the resulting materials.

Biomolecular environment, quantification, and intracellular interaction of multifunctional magnetic SERS nanoprobes

Multifunctional composite nanoprobes consisting of iron oxide nanoparticles linked to silver and gold nanoparticles, Ag-Magnetite and Au-Magnetite, respectively, were introduced by endocytic uptake into cultured fibroblast cells. The cells containing the non-toxic nanoprobes were shown to be displaceable in an external magnetic field and can be manipulated in microfluidic channels. The distribution of the composite nanostructures that are contained in the endosomal system is discussed on the basis of surface-enhanced Raman scattering (SERS) mapping, quantitative laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) micromapping, and cryo soft X-ray tomography (cryo soft-XRT). Cryo soft-XRT of intact, vitrified cells reveals that the composite nanoprobes form intra-endosomal aggregates. The nanoprobes provide SERS signals from the biomolecular composition of their surface in the endosomal environment. The SERS data indicate the high stability of the nanoprobes and of their plasmonic properties in the harsh environment of endosomes and lysosomes. The spectra point at the molecular composition at the surface of the Ag-Magnetite and Au-Magnetite nanostructures that is very similar to that of other composite structures, but different from the composition of pure silver and gold SERS nanoprobes used for intracellular investigations. As shown by the LA-ICP-MS data, the uptake efficiency of the magnetite composites is approximately two to three times higher than that of the pure gold and silver nanoparticles.

Preparation of graphene oxide-wrapped carbon sphere@silver spheres for high performance chlorinated phenols sensor

A template-activated strategy was developed to construct core/shell structured carbon sphere@silver composite based on one-pot hydrothermal treatment. The CS@Ag possessed a uniform three-dimensional interconnected microstructure with an enlarged surface area and catalytic activity, which was further mechanically protected by graphene oxide (GO) nanolayers to fabricate intriguing configuration, which was beneficial for efficiently preventing the aggregation and oxidation of AgNPs and improving the electrical conductivity through intimate contact. By immobilizing this special material on electrode surface, the CS@Ag@GO was further used for sensitive determination of chlorinated phenols including 2-chlorophenol, 4-chlorophenol, 2,4-dichlorophenol and 2,4,6-trichlorophenol. The tailored structure, fast electron transfer ability and facile preparation of CS@Ag@GO made it a promising electrode material for practical applications in phenols sensing.

Formation mechanism of magnetic–plasmonic Ag@FeCo@Ag core–shell–shell nanoparticles: fact is more interesting than fiction

The formation mechanism of Ag@FeCo@Ag core–shell–shell nanoparticles which are synthesized by the combination of a multi-step hot injection method and a polyol method was investigated by comparing several different derivative NPs such as Ag@FeCo, Ag@Co, Ag@Fe and FeCo NPs.